[
  {
    "name": "MQTTOn",
    "title": "MQTTOn",
    "descr": "Legacy variable, without $ prefix. Returns 1 if MQTT is connected, otherwise 0.",
    "requires": ""
  },
  {
    "name": "$MQTTOn",
    "title": "$MQTTOn",
    "descr": "Returns 1 if MQTT is connected, otherwise 0.",
    "requires": ""
  },
  {
    "name": "$CH***",
    "title": "$CH***",
    "descr": "Provides channel access, so you can do math expressions on channel values. $CH1 is channel 1, $CH20 is channel 20, $CH140 is channel 140, etc",
    "requires": ""
  },
  {
    "name": "$CH**",
    "title": "$CH**",
    "descr": "Provides channel access, as above.",
    "requires": ""
  },
  {
    "name": "$CH*",
    "title": "$CH*",
    "descr": "Provides channel access, as above.",
    "requires": ""
  },
  {
    "name": "$led_dimmer",
    "title": "$led_dimmer",
    "descr": "Current value of LED dimmer, 0-100 range",
    "requires": ""
  },
  {
    "name": "$led_enableAll",
    "title": "$led_enableAll",
    "descr": "Returns 1 if LED is enabled, otherwise 0.",
    "requires": ""
  },
  {
    "name": "$led_hue",
    "title": "$led_hue",
    "descr": "Current LED Hue value",
    "requires": ""
  },
  {
    "name": "$led_red",
    "title": "$led_red",
    "descr": "Current LED red value",
    "requires": ""
  },
  {
    "name": "$led_green",
    "title": "$led_green",
    "descr": "Current LED green value",
    "requires": ""
  },
  {
    "name": "$led_blue",
    "title": "$led_blue",
    "descr": "Current LED blue value",
    "requires": ""
  },
  {
    "name": "$led_saturation",
    "title": "$led_saturation",
    "descr": "Current LED saturation value",
    "requires": ""
  },
  {
    "name": "$led_temperature",
    "title": "$led_temperature",
    "descr": "Current LED temperature value",
    "requires": ""
  },
  {
    "name": "$activeRepeatingEvents",
    "title": "$activeRepeatingEvents",
    "descr": "Current number of active repeating events",
    "requires": ""
  },
  {
    "name": "$voltage",
    "title": "$voltage",
    "descr": "Current value of voltage from energy metering chip. You can use those variables to make, for example, a change handler that fires when voltage is above 245, etc.",
    "requires": ""
  },
  {
    "name": "$current",
    "title": "$current",
    "descr": "Current value of current from energy metering chip",
    "requires": ""
  },
  {
    "name": "$power",
    "title": "$power",
    "descr": "Current value of power from energy metering chip",
    "requires": ""
  },
  {
    "name": "$uptime",
    "title": "$uptime",
    "descr": "Time since reboot in seconds",
    "requires": ""
  }
]