[
  {
    "index": "0",
    "enum": "OBK_FLAG_MQTT_BROADCASTLEDPARAMSTOGETHER",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Broadcast led params together (send dimmer and color when dimmer or color changes, topic name: YourDevName/led_basecolor_rgb/get, YourDevName/led_dimmer/get)\","
  },
  {
    "index": "1",
    "enum": "OBK_FLAG_MQTT_BROADCASTLEDFINALCOLOR",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Broadcast led final color (topic name: YourDevName/led_finalcolor_rgb/get)\","
  },
  {
    "index": "2",
    "enum": "OBK_FLAG_MQTT_BROADCASTSELFSTATEPERMINUTE",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Broadcast self state every N (def: 60) seconds (delay configurable by 'mqtt_broadcastInterval' and 'mqtt_broadcastItemsPerSec' commands)\","
  },
  {
    "index": "3",
    "enum": "OBK_FLAG_LED_RAWCHANNELSMODE",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED][Debug] Show raw PWM controller on WWW index instead of new LED RGB/CW/etc picker\","
  },
  {
    "index": "4",
    "enum": "OBK_FLAG_LED_FORCESHOWRGBCWCONTROLLER",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Force show RGBCW controller (for example, for SM2135 LEDs, or for DGR sender)\","
  },
  {
    "index": "5",
    "enum": "OBK_FLAG_CMD_ENABLETCPRAWPUTTYSERVER",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[CMD] Enable TCP console command server (for Putty, etc)\","
  },
  {
    "index": "6",
    "enum": "OBK_FLAG_BTN_INSTANTTOUCH",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[BTN] Instant touch reaction instead of waiting for release (aka SetOption 13)\","
  },
  {
    "index": "7",
    "enum": "OBK_FLAG_MQTT_ALWAYSSETRETAIN",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] [Debug] Always set Retain flag to all published values\","
  },
  {
    "index": "8",
    "enum": "OBK_FLAG_LED_ALTERNATE_CW_MODE",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Alternate CW light mode (first PWM for warm/cold slider, second for brightness)\","
  },
  {
    "index": "9",
    "enum": "OBK_FLAG_SM2135_SEPARATE_MODES",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[SM2135] Use separate RGB/CW modes instead of writing all 5 values as RGB\","
  },
  {
    "index": "10",
    "enum": "OBK_FLAG_MQTT_BROADCASTSELFSTATEONCONNECT",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Broadcast self state on MQTT connect\","
  },
  {
    "index": "11",
    "enum": "OBK_FLAG_SLOW_PWM",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[PWM] BK7231 use 600hz instead of 1khz default\","
  },
  {
    "index": "12",
    "enum": "OBK_FLAG_LED_REMEMBERLASTSTATE",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Remember LED driver state (RGBCW, enable, brightness, temperature) after reboot\","
  },
  {
    "index": "13",
    "enum": "OBK_FLAG_HTTP_PINMONITOR",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[HTTP] Show actual PIN logic level for unconfigured pins\","
  },
  {
    "index": "14",
    "enum": "OBK_FLAG_IR_PUBLISH_RECEIVED",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[IR] Do MQTT publish (RAW STRING) for incoming IR data\","
  },
  {
    "index": "15",
    "enum": "OBK_FLAG_IR_ALLOW_UNKNOWN",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[IR] Allow 'unknown' protocol\","
  },
  {
    "index": "16",
    "enum": "OBK_FLAG_LED_BROADCAST_FULL_RGBCW",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Broadcast led final color RGBCW (topic name: YourDevName/led_finalcolor_rgbcw/get)\","
  },
  {
    "index": "17",
    "enum": "OBK_FLAG_LED_AUTOENABLE_ON_WWW_ACTION",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Automatically enable Light when changing brightness, color or temperature on WWW panel\","
  },
  {
    "index": "18",
    "enum": "OBK_FLAG_LED_SMOOTH_TRANSITIONS",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Smooth transitions for LED (EXPERIMENTAL)\","
  },
  {
    "index": "19",
    "enum": "OBK_FLAG_TUYAMCU_ALWAYSPUBLISHCHANNELS",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Always publish channels used by TuyaMCU\","
  },
  {
    "index": "20",
    "enum": "OBK_FLAG_LED_FORCE_MODE_RGB",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Force RGB mode (3 PWMs for LEDs) and ignore futher PWMs if they are set\","
  },
  {
    "index": "21",
    "enum": "OBK_FLAG_MQTT_RETAIN_POWER_CHANNELS",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Retain power channels (Relay channels, etc)\","
  },
  {
    "index": "22",
    "enum": "OBK_FLAG_IR_PUBLISH_RECEIVED_IN_JSON",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[IR] Do MQTT publish (Tasmota JSON format) for incoming IR data\","
  },
  {
    "index": "23",
    "enum": "OBK_FLAG_LED_AUTOENABLE_ON_ANY_ACTION",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Automatically enable Light on any change of brightness, color or temperature\","
  },
  {
    "index": "24",
    "enum": "OBK_FLAG_LED_EMULATE_COOL_WITH_RGB",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Emulate Cool White with RGB in device with four PWMS - Red is 0, Green 1, Blue 2, and Warm is 4\","
  },
  {
    "index": "25",
    "enum": "OBK_FLAG_POWER_ALLOW_NEGATIVE",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[POWER] Allow negative current/power for power measurement (all chips, BL0937, BL0942, etc)\","
  },
  {
    "index": "26",
    "enum": "OBK_FLAG_USE_SECONDARY_UART",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[UART] Use alternate UART for BL0942, CSE, TuyaMCU, etc\","
  },
  {
    "index": "27",
    "enum": "OBK_FLAG_AUTOMAIC_HASS_DISCOVERY",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[HASS] Invoke HomeAssistant discovery on change to ip address, configuration\","
  },
  {
    "index": "28",
    "enum": "OBK_FLAG_LED_SETTING_WHITE_RGB_ENABLES_CW",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Setting RGB white (FFFFFF) enables temperature mode\","
  },
  {
    "index": "29",
    "enum": "OBK_FLAG_USE_SHORT_DEVICE_NAME_AS_HOSTNAME",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[NETIF] Use short device name as a hostname instead of a long name\","
  },
  {
    "index": "30",
    "enum": "OBK_FLAG_DO_TASMOTA_TELE_PUBLISHES",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Enable Tasmota TELE etc publishes (for ioBroker etc)\","
  },
  {
    "index": "31",
    "enum": "OBK_FLAG_CMD_ACCEPT_UART_COMMANDS",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[UART] Enable UART command line\","
  },
  {
    "index": "32",
    "enum": "OBK_FLAG_LED_USE_OLD_LINEAR_MODE",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[LED] Use old linear brightness mode, ignore gamma ramp\","
  },
  {
    "index": "33",
    "enum": "OBK_FLAG_PUBLISH_MULTIPLIED_VALUES",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] Apply channel type multiplier on (if any) on channel value before publishing it\","
  },
  {
    "index": "34",
    "enum": "OBK_FLAG_MQTT_HASS_ADD_RELAYS_AS_LIGHTS",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[MQTT] In HA discovery, add relays as lights\","
  },
  {
    "index": "35",
    "enum": "OBK_FLAG_NOT_PUBLISH_AVAILABILITY_SENSOR",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[HASS] Deactivate avty_t flag for sensor when publishing to HASS (permit to keep value)\","
  },
  {
    "index": "36",
    "enum": "OBK_FLAG_DRV_DISABLE_AUTOSTART",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[DRV] Deactivate Autostart of all drivers\","
  },
  {
    "index": "37",
    "enum": "OBK_FLAG_WIFI_FAST_CONNECT",
    "title": "todo",
    "file": "new_pins.h",
    "descr": "[WiFi] Quick connect to WiFi on reboot (TODO: check if it works for you and report on github)\","
  }
]