mirror of
https://github.com/openshwprojects/OpenBK7231T_App.git
synced 2026-02-05 10:55:44 +00:00
83 lines
2.6 KiB
Batchfile
83 lines
2.6 KiB
Batchfile
// See tutorial: https://www.elektroda.com/rtvforum/topic4009196.html
|
|
|
|
// start TuyaMCU driver
|
|
startDriver TuyaMCU
|
|
// set TuyaMCU baud rate
|
|
tuyaMcu_setBaudRate 115200
|
|
// set TuyaMCU default wifi state 0x04, which means "paired",
|
|
// because some TuyaMCU MCUs will not report all data
|
|
// unless they think they are connected to cloud
|
|
tuyaMcu_defWiFiState 4
|
|
// start NTP driver, so we have time from web
|
|
startDriver NTP
|
|
// set channel 1 to display toggle
|
|
setChannelType 1 Toggle
|
|
// Map given dpID to channel 1, dpID type bool
|
|
// linkTuyaMCUOutputToChannel [dpId][varType][channelID]
|
|
linkTuyaMCUOutputToChannel 1 bool 1
|
|
// channel 2 will be temperature
|
|
setChannelType 2 temperature
|
|
// Map given dpID to channel 2, dpID type value
|
|
linkTuyaMCUOutputToChannel 24 val 2
|
|
|
|
// setup cosmetics for channel 10
|
|
setChannelLabel 10 "<b><span style='color:orange'\>Time left</span></b>"
|
|
// set channel 10 to display formatted time
|
|
setChannelType 10 TimerSeconds
|
|
|
|
// create command aliases for enable + setup delay (in channel 10) sequences
|
|
alias enable_30min backlog POWER ON; setChannel 10 30*60
|
|
alias enable_30sec backlog POWER ON; setChannel 10 30
|
|
|
|
// set channel 11 label, channel 11 will allow to enter hours value of new timespan
|
|
setChannelLabel 11 "<b><span style='color:orange'\>Custom time setting [hours]</span></b>"
|
|
setChannelType 11 TextField
|
|
|
|
// start driver handling extra buttons on http page
|
|
startDriver httpButtons
|
|
// button 0 - set enable to 1
|
|
setButtonEnabled 0 1
|
|
// set button 0 label
|
|
setButtonLabel 0 "Enable for 30 minutes"
|
|
// set button 0 command (see alias created above)
|
|
setButtonCommand 0 "enable_30min"
|
|
// set button 0 color (CSS color code)
|
|
setButtonColor 0 "green"
|
|
|
|
// when anything sets relay to off, also clear timer
|
|
addChangeHandler Channel1 == 0 setChannel 10 0
|
|
// if user manually sets channel 1 with no timer, then set default time
|
|
addChangeHandler Channel1 == 1 if $CH10==0 then "setChannel 10 1234"
|
|
|
|
// just like for button 0, also setup button 1
|
|
setButtonEnabled 1 1
|
|
setButtonLabel 1"Enable for 60 minutes"
|
|
setButtonCommand 1 "enable_60min"
|
|
setButtonColor 1 "green"
|
|
|
|
// just like for button 0, also setup button 2
|
|
startDriver httpButtons
|
|
setButtonEnabled 2 1
|
|
setButtonLabel 2 "Enable for 30 sec"
|
|
setButtonCommand 2 "enable_30sec"
|
|
setButtonColor 2 "green"
|
|
|
|
|
|
// every 10 seconds, request update from TuyaMCU
|
|
addRepeatingEvent 10 -1 tuyaMcu_sendQueryState
|
|
|
|
// now this part runs in a loop
|
|
again:
|
|
// wait one secnd
|
|
delay_s 1
|
|
// if channel sued for timer has reached 0, time off
|
|
if $CH10<=0 then POWER OFF
|
|
|
|
// subtract one from time, clamp at 0 and 99999
|
|
addChannel 10 -1 0 999999
|
|
|
|
// continue the loop forever
|
|
goto again
|
|
|
|
|