90 Commits

Author	SHA1	Message	Date
Michael Bestas	9aff51ad3a	Merge tag 'v4.19.325-cip123' of https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip into android13-4.19-kona ... version 4.19.325-cip123 * tag 'v4.19.325-cip123' of https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip: CIP: Bump version suffix to -cip123 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.296. emulex/benet: Fix build by return mismatch in be_cmd_unlock() net/sched: Abort __tc_modify_qdisc if parent class does not exist mtk-sd: Prevent memory corruption from DMA map failure mmc: mediatek: use data instead of mrq parameter from msdc_{un}prepare_data() scsi: qla4xxx: Fix missing DMA mapping error in qla4xxx_alloc_pdu() btrfs: don't abort filesystem when attempting to snapshot deleted subvolume VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notify net: ipv6: Discard next-hop MTU less than minimum link MTU Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY vt: add missing notification when switching back to text mode net: usb: qmi_wwan: add SIMCom 8230C composition atm: idt77252: Add missing `dma_map_error()` bnxt_en: Fix DCB ETS validation can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level net: appletalk: Fix device refcount leak in atrtr_create() md/raid1: Fix stack memory use after return in raid1_reshape wifi: zd1211rw: Fix potential NULL pointer dereference in zd_mac_tx_to_dev() dma-buf: fix timeout handling in dma_resv_wait_timeout v2 Input: xpad - support Acer NGR 200 Controller Input: xpad - add VID for Turtle Beach controllers Input: xpad - add support for Amazon Game Controller netlink: Fix rmem check in netlink_broadcast_deliver(). netlink: make sure we allow at least one dump skb Revert "ACPI: battery: negate current when discharging" usb: gadget: u_serial: Fix race condition in TTY wakeup drm/sched: Increment job count before swapping tail spsc queue x86/mce: Make sure CMCI banks are cleared during shutdown on Intel x86/mce: Don't remove sysfs if thresholding sysfs init fails x86/mce/amd: Fix threshold limit reset rxrpc: Fix oops due to non-existence of prealloc backlog struct atm: clip: Fix NULL pointer dereference in vcc_sendmsg() atm: clip: Fix infinite recursive call of clip_push(). atm: clip: Fix memory leak of struct clip_vcc. atm: clip: Fix potential null-ptr-deref in to_atmarpd(). tipc: Fix use-after-free in tipc_conn_close(). netlink: Fix wraparounds of sk->sk_rmem_alloc. fix proc_sys_compare() handling of in-lookup dentries proc: Clear the pieces of proc_inode that proc_evict_inode cares about staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher() media: uvcvideo: Rollback non processed entities on error media: uvcvideo: Send control events for partial succeeds media: uvcvideo: Return the number of processed controls ACPI: PAD: fix crash in exit_round_robin() usb: typec: displayport: Fix potential deadlock Logitech C-270 even more broken rose: fix dangling neighbour pointers in rose_rt_device_down() net: rose: Fix fall-through warnings for Clang ethernet: atl1: Add missing DMA mapping error checks and count errors btrfs: use btrfs_record_snapshot_destroy() during rmdir btrfs: propagate last_unlink_trans earlier when doing a rmdir RDMA/mlx5: Fix CC counters query for MPV scsi: ufs: core: Fix spelling of a sysfs attribute name ACPICA: Refuse to evaluate a method if arguments are missing wifi: ath6kl: remove WARN on bad firmware input wifi: mac80211: drop invalid source address OCB frames powerpc: Fix struct termio related ioctl macros ata: pata_cs5536: fix build on 32-bit UML ALSA: sb: Force to disable DMAs once when DMA mode is changed net/sched: Always pass notifications when child class becomes empty nui: Fix dma_mapping_error() check enic: fix incorrect MTU comparison in enic_change_mtu() amd-xgbe: align CL37 AN sequence as per databook btrfs: fix missing error handling when searching for inode refs during log replay mtk-sd: Fix a pagefault in dma_unmap_sg() for not prepared data usb: typec: altmodes/displayport: do not index invalid pin_assignments Revert "mmc: sdhci: Disable SD card clock before changing parameters" mmc: sdhci: Add a helper function for dump register in dynamic debug mode vsock/vmci: Clear the vmci transport packet properly when initializing it arm64: Restrict pagetable teardown to avoid false warning drm/bridge: cdns-dsi: Fix connecting to next bridge drm/tegra: Assign plane type before registration HID: wacom: fix kobject reference count leak HID: wacom: fix memory leak on sysfs attribute creation failure HID: wacom: fix memory leak on kobject creation failure dm-raid: fix variable in journal device check Bluetooth: L2CAP: Fix L2CAP MTU negotiation atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister(). um: ubd: Add missing error check in start_io_thread() vsock/uapi: fix linux/vm_sockets.h userspace compilation errors wifi: mac80211: fix beacon interval calculation overflow ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() i2c: robotfuzz-osif: disable zero-length read messages i2c: tiny-usb: disable zero-length read messages RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction RDMA/core: Use refcount_t instead of atomic_t on refcount of iwcm_id_private media: vivid: Change the siize of the composing media: omap3isp: use sgtable-based scatterlist wrappers jfs: validate AG parameters in dbMount() to prevent crashes fs/jfs: consolidate sanity checking in dbMount VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF ovl: Check for NULL d_inode() in ovl_dentry_upper() ceph: fix possible integer overflow in ceph_zero_objects() ALSA: hda: Ignore unsol events for cards being shut down usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode usb: cdc-wdm: avoid setting WDM_READ for ZLP-s usb: Add checks for snprintf() calls in usb_alloc_dev() usb: potential integer overflow in usbg_make_tpg() iio: pressure: zpa2326: Use aligned_s64 for the timestamp md/md-bitmap: fix dm-raid max_write_behind setting dmaengine: xilinx_dma: Set dma_device directions mfd: max14577: Fix wakeup source leaks on device unbind mailbox: Not protect module_put with spin_lock_irqsave cifs: Fix cifs_query_path_info() for Windows NT servers CIP: Bump version suffix to -cip122 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.295. ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms ARM: dts: am335x-bone-common: Increase MDIO reset deassert time ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board ARM: dts: am335x-bone-common: get rid of phy_id property mtd: nand: sunxi: Add randomizer configuration before randomizer enable mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue() bridge: netfilter: Fix forwarding of fragmented packets vxlan: Annotate FDB data races hwmon: (gpio-fan) Add missing mutex locks nfs: handle failure of nfs_get_lock_context in unlock path sch_htb: make htb_deactivate() idempotent scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth() perf: Fix sample vs do_exit() jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata() mm/huge_memory: fix dereferencing invalid pmd migration entry posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del() net: atm: fix /proc/net/atm/lec handling net: atm: add lec_mutex calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer atm: atmtcp: Free invalid length skb in atmtcp_c_send(). mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu(). wifi: carl9170: do not ping device which has failed to load firmware drm/nouveau/bl: increase buffer size to avoid truncate warning ALSA: hda/realtek: enable headset mic on Latitude 5420 Rugged ALSA: hda/intel: Add Thinkpad E15 to PM deny list Input: sparcspkr - avoid unannotated fall-through HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse() atm: Revert atm_account_tx() if copy_from_iter_full() fails. selinux: fix selinux_xfrm_alloc_user() to set correct ctx_len scsi: s390: zfcp: Ensure synchronous unit_add jffs2: check jffs2_prealloc_raw_node_refs() result in few other places jffs2: check that raw node were preallocated before writing summary drivers/rapidio/rio_cm.c: prevent possible heap overwrite Revert "x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2" on v6.6 and older powerpc/eeh: Fix missing PE bridge reconfiguration during VFIO EEH recovery platform/x86: dell_rbu: Stop overwriting data buffer tee: Prevent size calculation wraparound on 32-bit kernels ARM: OMAP2+: Fix l4ls clk domain handling in STANDBY bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value watchdog: da9052_wdt: respect TWDMIN i40e: fix MMIO write access to an invalid page in i40e_clear_hw sock: Correct error checking condition for (assign|release)_proto_idx() vxlan: Do not treat dst cache initialization errors as fatal clk: rockchip: rk3036: mark ddrphy as critical wifi: mac80211: do not offer a mesh path if forwarding is disabled net: mlx4: add SOF_TIMESTAMPING_TX_SOFTWARE flag when getting ts info pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RT tcp: always seek for minimal rtt in tcp_rcv_rtt_update() net: dlink: add synchronization for stats update sctp: Do not wake readers in __sctp_write_space() emulex/benet: correct command version selection in be_cmd_get_stats() i2c: designware: Invoke runtime suspend on quick slave re-registration net: macb: Check return value of dma_set_mask_and_coherent() cpufreq: Force sync policy boost with global boost on sysfs update nios2: force update_mmu_cache on spurious tlb-permission--related pagefaults media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode() media: tc358743: ignore video while HPD is low drm/amdkfd: Set SDMA_RLCx_IB_CNTL/SWITCH_INSIDE_IB jfs: Fix null-ptr-deref in jfs_ioc_trim drm/amdgpu/gfx9: fix CSIB handling drm/amdgpu/gfx8: fix CSIB handling jfs: fix array-index-out-of-bounds read in add_missing_indices drm/amdgpu/gfx7: fix CSIB handling drm/amd/display: Add NULL pointer checks in dm_force_atomic_commit() media: uapi: v4l: Fix V4L2_TYPE_IS_OUTPUT condition sunrpc: update nextcheck time when adding new cache entries drm/amdgpu/gfx6: fix CSIB handling ACPI: battery: negate current when discharging power: supply: bq27xxx: Retrieve again when busy ACPICA: fix acpi parse and parseext cache leaks ACPICA: Avoid sequence overread in call to strncmp() ACPICA: fix acpi operand cache leak in dswstate.c PCI: Fix lock symmetry in pci_slot_unlock() regulator: max14577: Add error check for max14577_read_reg() staging: iio: ad5933: Correct settling cycles encoding per datasheet net: ch9200: fix uninitialised access during mii_nway_restart ftrace: Fix UAF when lookup kallsym after ftrace disabled dm-mirror: fix a tiny race condition mm: fix ratelimit_pages update error in dirty_ratio_handler() ipc: fix to protect IPCS lookups using RCU parisc: fix building with gcc-15 vgacon: Add check for vc_origin address range in vgacon_scroll() NFC: nci: uart: Set tty->disc_data only in success path f2fs: prevent kernel warning due to negative i_nlink from corrupted image Input: ims-pcu - check record size in ims_pcu_flash_firmware() ext4: fix calculation of credits for extent tree modification ext4: inline: fix len overflow in ext4_prepare_inline_data ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330 media: v4l2-dev: fix error handling in __video_register_device() media: gspca: Add error handling for stv06xx_read_sensor() wifi: rtlwifi: disable ASPM for RTL8723BE with subsystem ID 11ad:1723 nfsd: nfsd4_spo_must_allow() must check this is a v4 compound request wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() gfs2: move msleep to sleepable context configfs: Do not override creating attribute file failure in populate_attrs() calipso: unlock rcu before returning -EAFNOSUPPORT usb: Flush altsetting 0 endpoints before reinitializating them after reset. fs/filesystems: Fix potential unsigned integer underflow in fs_name() net/mdiobus: Fix potential out-of-bounds read/write access MIPS: Move '-Wa,-msoft-float' check from as-option to cc-option x86/boot/compressed: prefer cc-option for CFLAGS additions net: mdio: C22 is now optional, EOPNOTSUPP if not provided i40e: retry VFLR handling if there is ongoing VF reset i40e: return false from i40e_reset_vf if reset is in progress net_sched: sch_sfq: fix a potential crash on gso_skb handling scsi: iscsi: Fix incorrect error path labels for flashnode operations NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes NFSD: Fix ia_size underflow Input: synaptics-rmi - fix crash with unsupported versions of F34 Input: synaptics-rmi4 - convert to use sysfs_emit() APIs do_change_type(): refuse to operate on unmounted/not ours mounts net/mlx4_en: Prevent potential integer overflow calculating Hz rtc: Fix offset calculation for .start_secs < 0 rtc: sh: assign correct interrupts with DT perf tests switch-tracking: Fix timestamp comparison mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE mfd: exynos-lpass: Avoid calling exynos_lpass_disable() twice in exynos_lpass_remove() rpmsg: qcom_smd: Fix uninitialized return variable in __qcom_smd_send() perf ui browser hists: Set actions->thread before calling do_zoom_thread() fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod() soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device bus: fsl-mc: fix double-free on mc_dev nilfs2: do not propagate ENOENT error from nilfs_btree_propagate() nilfs2: add pointer check for nilfs_direct_propagate() Squashfs: check return result of sb_min_blocksize ARM: dts: at91: at91sam9263: fix NAND chip selects ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip select f2fs: fix to correct check conditions in f2fs_cross_rename f2fs: use d_inode(dentry) cleanup dentry->d_inode calipso: Don't call calipso functions for AF_INET sk. net: lan743x: rename lan743x_reset_phy to lan743x_hw_reset_phy wifi: ath9k_htc: Abort software beacon handling if disabled bpf: Fix WARN() in get_bpf_raw_tp_regs pinctrl: at91: Fix possible out-of-boundary access net: ncsi: Fix GCPS 64-bit member variables f2fs: fix to do sanity check on sbi->total_valid_block_count drm/tegra: rgb: Fix the unbound reference count drm: rcar-du: Fix memory leak in rcar_du_vsps_init() selftests/seccomp: fix syscall_restart test for arm compat firmware: psci: Fix refcount leak in psci_dt_init m68k: mac: Fix macintosh_config for Mac II drm/vmwgfx: Add seqno waiter for sync_files ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions" x86/mtrr: Check if fixed-range MTRRs exist in mtrr_save_fixed_ranges() crypto: marvell/cesa - Avoid empty transfer descriptor crypto: marvell/cesa - Handle zero-length skcipher requests x86/cpu: Sanitize CPUID(0x80000000) output perf/core: Fix broken throttling when max_samples_per_tick=1 gfs2: gfs2_create_inode error handling fix netfilter: nft_socket: fix sk refcount leaks thunderbolt: Do not double dequeue a configuration request usb: usbtmc: Fix timeout value in get_stb usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device usb: quirks: Add NO_LPM quirk for SanDisk Extreme 55AE pinctrl: armada-37xx: set GPIO output value before setting direction pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31 tracing: Fix compilation warning on arm32 platform/x86: thinkpad_acpi: Ignore battery threshold change event notification platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys spi: spi-sun4i: fix early activation um: let 'make clean' properly clean underlying SUBARCH as well platform/x86: thinkpad_acpi: Support also NEC Lavie X1475JAS nfs: don't share pNFS DS connections between net namespaces HID: quirks: Add ADATA XPG alpha wireless mouse support coredump: fix error handling for replace_fd() smb: client: Reset all search buffer pointers when releasing buffer smb: client: Fix use-after-free in cifs_fill_dirent drm/i915/gvt: fix unterminated-string-initialization warning netfilter: nf_tables: do not defer rule destruction via call_rcu netfilter: nf_tables: wait for rcu grace period on net_device removal netfilter: nf_tables: pass nft_chain to destroy function, not nft_ctx mm/page_alloc.c: avoid infinite retries caused by cpuset race llc: fix data loss when reading from a socket in llc_ui_recvmsg() ALSA: pcm: Fix race of buffer access at PCM OSS layer can: bcm: add missing rcu read protection for procfs content can: bcm: add locking for bcm_op runtime updates crypto: algif_hash - fix double free in hash_accept net: dwmac-sun8i: Use parsed internal PHY address instead of 1 __legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock xenbus: Allow PVH dom0 a non-local xenstore btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013 pinctrl: meson: define the pull up/down resistor value as 60 kOhm drm: Add valid clones check regulator: ad5398: Add device tree support bpftool: Fix readlink usage in get_fd_type HID: usbkbd: Fix the bit shift number for LED_KANA scsi: st: Restore some drive settings after reset scsi: lpfc: Handle duplicate D_IDs in ndlp search-by D_ID routine hwmon: (xgene-hwmon) use appropriate type for the latency value ip: fib_rules: Fetch net from fib_rule in fib[46]_rule_configure(). net/mlx5: Extend Ethtool loopback selftest to support non-linear SKB net/mlx4_core: Avoid impossible mlx4_db_alloc() order value smack: recognize ipv4 CIPSO w/o categories pinctrl: devicetree: do not goto err when probing hogs in pinctrl_dt_to_map ASoC: ops: Enforce platform maximum on initial value ACPI: HED: Always initialize before evged PCI: Fix old_size lower bound in calculate_iosize() too EDAC/ie31200: work around false positive build warning net: pktgen: fix access outside of user given buffer in pktgen_thread_write() MIPS: pm-cps: Use per-CPU variables as per-CPU, not per-core MIPS: Use arch specific syscall name match function cpuidle: menu: Avoid discarding useful information x86/nmi: Add an emergency handler in nmi_desc & use it in nmi_shootdown_cpus() bonding: report duplicate MAC address in all situations net: xgene-v2: remove incorrect ACPI_PTR annotation x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2 net: pktgen: fix mpls maximum labels list parsing pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned" media: cx231xx: set device_caps for 417 dm cache: prevent BUG_ON by blocking retries on failed device resumes media: c8sectpfe: Call of_node_put(i2c_bus) only once in c8sectpfe_probe() ARM: tegra: Switch DSI-B clock parent to PLLD on Tegra114 ieee802154: ca8210: Use proper setters and getters for bitwise types rtc: ds1307: stop disabling alarms on probe powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7 mmc: sdhci: Disable SD card clock before changing parameters posix-timers: Add cond_resched() to posix_timer_add() search loop xen: Add support for XenServer 6.1 platform device dm: restrict dm device size to 2^63-512 bytes kbuild: fix argument parsing in scripts/config scsi: st: ERASE does not change tape location scsi: st: Tighten the page format heuristics with MODE SELECT ext4: reorder capability check last um: Update min_low_pfn to match changes in uml_reserved um: Store full CSGSFS and SS register from mcontext btrfs: send: return -ENAMETOOLONG when attempting a path that is too long btrfs: avoid linker error in btrfs_find_create_tree_block() i2c: pxa: fix call balance of i2c->clk handling routines mmc: host: Wait for Vdd to settle on card power off pNFS/flexfiles: Report ENETDOWN as a connection error tools/build: Don't pass test log files to linker dql: Fix dql->limit value when reset. SUNRPC: rpc_clnt_set_transport() must not change the autobind setting NFSv4: Treat ENETUNREACH errors as fatal for state recovery fbdev: core: tileblit: Implement missing margin clearing for tileblit fbdev: fsl-diu-fb: add missing device_remove_file() mailbox: use error ret code of of_parse_phandle_with_args() kconfig: merge_config: use an empty file as initfile cgroup: Fix compilation issue due to cgroup_mutex not being exported dma-mapping: avoid potential unused data compilation warning scsi: target: iscsi: Fix timeout on deleted connection openvswitch: Fix unsafe attribute parsing in output_userspace() Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5 Input: synaptics - enable SMBus for HP Elitebook 850 G1 phy: Fix error handling in tegra_xusb_port_init ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2() ACPI: PPTT: Fix processor subtable walk qlcnic: fix memory leak in qlcnic_sriov_channel_cfg_cmd() ALSA: sh: SND_AICA should depend on SH_DMA_API spi: loopback-test: Do not split 1024-byte hexdumps RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug staging: axis-fifo: Correct handling of tx_fifo_depth for size validation staging: axis-fifo: avoid parsing ignored device tree properties platform/x86: asus-wmi: Fix wlan_ctrl_by_user detection do_umount(): add missing barrier before refcount checks in sync case MIPS: Fix MAX_REG_OFFSET iio: adc: dln2: Use aligned_s64 for timestamp types: Complement the aligned types with signed 64-bit one USB: usbtmc: use interruptible sleep in usbtmc_read usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition ocfs2: stop quota recovery before disabling quotas ocfs2: implement handshaking with ocfs2 recovery thread ocfs2: switch osb->disable_recovery to enum module: ensure that kobject_put() is safe for module type kobjects xenbus: Use kref to track req lifetime usb: uhci-platform: Make the clock really optional iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifo iio: adis16201: Correct inclinometer channel resolution Input: synaptics - enable InterTouch on Dell Precision M3800 Input: synaptics - enable InterTouch on Dynabook Portege X30L-G Input: synaptics - enable InterTouch on Dynabook Portege X30-D net: dsa: b53: fix learning on VLAN unaware bridges scsi: target: Fix WRITE_SAME No Data Buffer crash dm: fix copying after src array boundaries iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid irqchip/gic-v2m: Add const to of_device_id sch_htb: make htb_qlen_notify() idempotent of: module: add buffer overflow check in of_modalias() net: fec: ERR007885 Workaround for conventional TX lan743x: remove redundant initialization of variable current_head_index net: dlink: Correct endianness handling of led_mode tracing: Fix oob write in trace_seq_to_buffer() dm: always update the array size in realloc_argv on success wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offload i2c: imx-lpi2c: Fix clock count when probe defers EDAC/altera: Set DDR and SDMMC interrupt mask before registration EDAC/altera: Test the correct error reg offset signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro() x86/bugs: fix backport error in "x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline" x86/bugs: fix backport error in "x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline" CIP: Bump version suffix to -cip121 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.293. x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline clk: check for disabled clock-provider in of_clk_get_hw_from_clkspec() PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX MIPS: cm: Fix warning if MIPS_CM is disabled comedi: jr3_pci: Fix synchronous deletion of timer scsi: pm80xx: Set phy_attached to zero when device is gone ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls selftests: ublk: fix test_stripe_04 KVM: s390: Don't use %pK through tracepoints sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP ntb: reduce stack usage in idt_scan_mws qibfs: fix _another_ leak usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev() usb: host: max3421-hcd: Add missing spi_device_id table parisc: PDT: Fix missing prototype warning MIPS: cm: Detect CM quirks from device tree USB: VLI disk crashes if LPM is used usb: quirks: Add delay init quirk for SanDisk 3.2Gen1 Flash Drive usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash Drive usb: dwc3: gadget: check that event count does not exceed event buffer length USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02) USB: serial: simple: add OWON HDS200 series oscilloscope support USB: serial: option: add Sierra Wireless EM9291 USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe USB: storage: quirk for ADATA Portable HDD CH94 mcb: fix a double free bug in chameleon_parse_gdd() virtio_console: fix missing byte order handling for cols and rows net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too net_sched: hfsc: Fix a UAF vulnerability in class handling tipc: fix NULL pointer dereference in tipc_mon_reinit_self() net: phy: leds: fix memory leak cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate() misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error misc: pci_endpoint_test: Use INTX instead of LEGACY net: dsa: mv88e6xxx: fix VTU methods for 6320 family ext4: fix OOB read when checking dotdot dir ext4: optimize __ext4_check_dir_entry() MIPS: ds1287: Match ds1287_set_base_clock() function types MIPS: cevt-ds1287: Add missing ds1287.h include MIPS: dec: Declare which_prom() as static virtio-net: Add validation for used length openvswitch: fix lockup on tx to unregistering netdev with carrier net: openvswitch: fix race on port output mmc: cqhci: Fix checking of CQHCI_HALT state nvmet-fc: Remove unused functions usb: dwc3: support continuous runtime PM with dual role misc: pci_endpoint_test: Fix 'irq_type' to convey the correct type misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink(). kbuild: Add '-fno-builtin-wcslen' drm/sti: remove duplicate object names drm/repaper: fix integer overflows in repeat functions module: sign with sha512 instead of sha1 by default isofs: Prevent the use of too small fid i2c: cros-ec-tunnel: defer probe if parent EC is not present hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key btrfs: correctly escape subvol in btrfs_show_options() nfs: move nfs_fhandle_hash to common include file NFSD: Constify @fh argument of knfsd_fh_hash() asus-laptop: Fix an uninitialized variable writeback: fix false warning in inode_to_wb() net: b53: enable BPDU reception for management port net: openvswitch: fix nested key length validation in the set() action Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()" Bluetooth: btrtl: Prevent potential NULL dereference Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe() scsi: iscsi: Fix missing scsi_host_put() in error path wifi: wl1251: fix memory leak in wl1251_tx_work wifi: mac80211: Purge vif txq in ieee80211_do_stop() wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue() wifi: at76c50x: fix use after free access in at76_disconnect HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition Bluetooth: hci_uart: Fix another race during initialization x86/e820: Fix handling of subpage regions when calculating nosave ranges in e820__register_nosave_regions() PCI: Fix reference leak in pci_alloc_child_bus() of/irq: Fix device node refcount leakages in of_irq_init() of/irq: Fix device node refcount leakage in API irq_of_parse_and_map() gpio: zynq: Fix wakeup source leaks on device unbind ftrace: Add cond_resched() to ftrace_graph_set_hash() crypto: ccp - Fix check for the primary ASP device thermal/drivers/rockchip: Add missing rk3328 mapping entry sctp: detect and prevent references to a freed transport in sendmsg mm: add missing release barrier on PGDAT_RECLAIM_LOCKED unlock sparc/mm: disable preemption in lazy mmu mode arm64: dts: mediatek: mt8173: Fix disp-pwm compatible string mtd: inftlcore: Add error check for inftl_read_oob() lib: scatterlist: fix sg_split_phys to preserve original scatterlist offsets jbd2: remove wrong sb->s_sequence check ext4: fix off-by-one error in do_split media: venus: hfi_parser: add check to avoid out of bound access media: i2c: ov7251: Introduce 1 ms delay between regulators and en GPIO media: i2c: ov7251: Set enable GPIO low in probe media: v4l2-dv-timings: prevent possible overflow in v4l2_detect_gtf() media: streamzap: prevent processing IR data on URB failure mtd: rawnand: brcmnand: fix PM resume warning arm64: cputype: Add MIDR_CORTEX_A76AE xenfs/xensyms: respect hypervisor's "next" indication media: siano: Fix error handling in smsdvb_module_init() media: venus: hfi: add check to handle incorrect queue size media: venus: hfi: add a check to handle OOB in sfr region media: i2c: adv748x: Fix test pattern selection mask bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags bpf: Add endian modifiers to fix endian warnings fbdev: omapfb: Add 'plane' value check drm/mediatek: mtk_dpi: Explicitly manage TVD clock in power on/off drm/amdkfd: Fix pqm_destroy_queue race with GPU reset drm: allow encoder mode_set even when connectors change for crtc Bluetooth: hci_uart: fix race during initialization tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER net: vlan: don't propagate flags on open scsi: st: Fix array overflow in st_setup() ext4: ignore xattrs past end ext4: protect ext4_release_dquot against freezing ahci: add PCI ID for Marvell 88SE9215 SATA Controller ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode jfs: add sanity check for agwidth in dbMount jfs: Prevent copying of nlink with value 0 from disk inode fs/jfs: Prevent integer overflow in AG size calculation fs/jfs: cast inactags to s64 to prevent potential overflow ALSA: usb-audio: Fix CME quirk for UF series keyboards ALSA: hda: intel: Fix Optimus when GPU has no sound HID: pidff: Fix null pointer dereference in pidff_find_fields HID: pidff: Do not send effect envelope if it's empty HID: pidff: Convert infinite length from Linux API to PID standard perf: arm_pmu: Don't disable counter in armpmu_add() x86/cpu: Don't clear X86_FEATURE_LAHF_LM flag in init_amd_k8() on AMD when running in a virtual machine pm: cpupower: bench: Prevent NULL dereference on malloc failure net: ppp: Add bound checking for skb data on ppp_sync_txmung ata: sata_sx4: Add error handling in pdc20621_i2c_read() ata: sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones tipc: fix memory leak in tipc_link_xmit ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe() CIP: Bump version suffix to -cip120 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.292. net: dsa: mv88e6xxx: propperly shutdown PPU re-enable timer on destroy jfs: add index corruption check to DT_GETPAGE() jfs: fix slab-out-of-bounds read in ea_get() tracing: Fix use-after-free in print_graph_function_flags during tracer switching mmc: sdhci-pxav3: set NEED_RSP_BUSY capability x86/tsc: Always save/restore TSC sched_clock() on suspend/resume ntb_perf: Delete duplicate dmaengine_unmap_put() call in perf_copy_chunk() arcnet: Add NULL check in com20020pci_probe() ipv6: fix omitted netlink attributes when using RTEXT_FILTER_SKIP_STATS vsock: avoid timeout during connect() if the socket is closing net_sched: skbprio: Remove overly strict queue assertions netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets ntb: intel: Fix using link status DB's ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans spufs: fix a leak in spufs_create_context() spufs: fix a leak on spufs_new_file() failure hwmon: (nct6775-core) Fix out of bounds access for NCT679{8,9} sched/deadline: Use online cpus for validating runtime affs: don't write overlarge OFS data block size fields affs: generate OFS sequence numbers starting at 1 wifi: iwlwifi: fw: allocate chained SG tables for dump sched/smt: Always inline sched_smt_active() ring-buffer: Fix bytes_dropped calculation issue objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() fs/procfs: fix the comment above proc_pid_wchan() perf python: Check if there is space to copy all the event perf python: Decrement the refcount of just created event on failure perf python: Fixup description of sample.id event member ocfs2: validate l_tree_depth to avoid out-of-bounds access perf units: Fix insufficient array space iio: accel: mma8452: Ensure error return on failure to matching oversampling ratio coresight: catu: Fix number of pages while using 64k pages isofs: fix KMSAN uninit-value bug in do_isofs_readdir() x86/dumpstack: Fix inaccurate unwinding from exception stacks due to misplaced assignment mfd: sm501: Switch to BIT() to mitigate integer overflows RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow power: supply: max77693: Fix wrong conversion of charge input threshold value x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1 IB/mad: Check available slots before posting receive WRs clk: rockchip: rk3328: fix wrong clk_ref_usb3otg parent lib: 842: Improve error handling in sw842_compress() clk: amlogic: gxbb: drop incorrect flag on 32k clock fbdev: sm501fb: Add some geometry checks. mdacon: rework dependency list fbdev: au1100fb: Move a variable assignment behind a null pointer check PCI/portdrv: Only disable pciehp interrupts early when needed ALSA: hda/realtek: Always honor no_shutup_pins perf/ring_buffer: Allow the EPOLLRDNORM flag for poll lockdep: Don't disable interrupts on RT in disable_irq_nosync_lockdep.*() thermal: int340x: Add NULL check for adev EDAC/ie31200: Fix the error path order of ie31200_init() EDAC/ie31200: Fix the DIMM size mask for several SoCs x86/fpu: Avoid copying dynamic FP state from init_task in arch_dup_task_struct() cpufreq: governor: Fix negative 'idle_time' handling in dbs_update() net: usb: usbnet: restore usb%d name exception for local mac addresses net: usb: qmi_wwan: add Telit Cinterion FE990B composition net: usb: qmi_wwan: add Telit Cinterion FN990B composition tty: serial: 8250: Add some more device IDs netfilter: socket: Lookup orig tuple for IPv6 SNAT ARM: 9351/1: fault: Add "cut here" line for prefetch aborts ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed() atm: Fix NULL pointer dereference ALSA: usb-audio: Add quirk for Plantronics headsets to fix control names drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse() batman-adv: Ignore own maximum aggregation size during RX ARM: shmobile: smp: Enforce shmobile_smp_* alignment mmc: atmel-mci: Add missing clk_disable_unprepare() net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES net: atm: fix use after free in lec_send() Bluetooth: Fix error code in chan_alloc_skb_cb() RDMA/hns: Fix wrong value of max_sge_rd RDMA/bnxt_re: Avoid clearing VLAN_ID mask in modify qp path xfrm_output: Force software GSO only in tunnel mode i2c: sis630: Fix an error handling path in sis630_probe() i2c: ali15x3: Fix an error handling path in ali15x3_probe() i2c: ali1535: Fix an error handling path in ali1535_probe() ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe() drm/gma500: Add NULL check for pci_gfx_root in mid_get_vbt_data() qlcnic: fix memory leak issues in qlcnic_sriov_common.c drm/amd/display: Assign normalized_pix_clk when color depth = 14 x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes USB: serial: option: match on interface class for Telit FN990B USB: serial: option: fix Telit Cinterion FE990A name USB: serial: option: add Telit Cinterion FE990B compositions USB: serial: ftdi_sio: add support for Altera USB Blaster 3 block: fix 'kmem_cache of name 'bio-108' already exists' drm/nouveau: Do not override forced connector status x86/irq: Define trace events conditionally nvme: only allow entering LIVE from CONNECTING state sctp: Fix undefined behavior in left shift operation nvmet-rdma: recheck queue state is LIVE in state lock in recv done s390/cio: Fix CHPID "configure" attribute caching HID: ignore non-functional sensor in HP 5MP Camera iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() powercap: call put_device() on an error path in powercap_register_control_type() nvme-fc: go straight to connecting state when initializing net_sched: Prevent creation of classes with TC_H_ROOT ipvs: prevent integer overflow in do_ip_vs_get_ctl() netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree() Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio() drivers/hv: Replace binary semaphore with mutex netpoll: hold rcu read lock in __netpoll_send_skb() netpoll: netpoll_send_skb() returns transmit status netpoll: move netpoll_send_skb() out of line netpoll: remove dev argument from netpoll_send_skb_on_dev() netpoll: Fix use correct return type for ndo_start_xmit() pinctrl: bcm281xx: Fix incorrect regmap max_registers value sctp: sysctl: auth_enable: avoid using current->nsproxy sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy Revert "sctp: sysctl: auth_enable: avoid using current->nsproxy" Revert "sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy" sched/isolation: Prevent boot crash when the boot CPU is nohz_full CIP: Bump version suffix to -cip119 after merge from cip/linux-4.19.y-st tree watchdog: renesas_wdt: support handover from bootloader Update localversion-st, tree is up-to-date with 5.4.291. gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl(). gtp: Destroy device along with udp socket's netns dismantle. net: gso: fix ownership in __udp_gso_segment vlan: fix memory leak in vlan_newlink() batman-adv: Drop unmanaged ELP metric worker tee: optee: Fix supplicant wait loop pps: Fix a use-after-free net: rose: lock the socket in rose_bind() btrfs: fix use-after-free when attempting to join an aborted transaction media: lmedm04: Handle errors for lme2510_int_read wifi: rtlwifi: rtl8192se: rise completion of firmware loading as last step eeprom: digsy_mtc: Make GPIO lookup table match the device slimbus: messaging: Free transaction ID in delayed interrupt scenario intel_th: pci: Add Panther Lake-P/U support intel_th: pci: Add Panther Lake-H support intel_th: pci: Add Arrow Lake support Squashfs: check the inode number is not the invalid value of zero xhci: pci: Fix indentation in the PCI device ID definitions usb: gadget: Check bmAttributes only if configuration is valid usb: gadget: Fix setting self-powered state on suspend usb: gadget: Set self-powered based on MaxPower and bmAttributes usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality usb: typec: ucsi: increase timeout for PPM reset operations usb: atm: cxacru: fix a flaw in existing endpoint checks usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader usb: renesas_usbhs: Use devm_usb_get_phy() Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection" net: ipv6: fix missing dst ref drop in ila lwtunnel net: ipv6: fix dst ref loop in ila lwtunnel net-timestamp: support TCP GSO case for a few missing flags vlan: enforce underlying device type ppp: Fix KMSAN uninit-value warning with bpf be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe() llc: do not use skb_get() before dev_queue_xmit() hwmon: (ad7314) Validate leading zero bits and return error hwmon: (ntc_thermistor) Fix the ncpXXxh103 sensor table hwmon: (pmbus) Initialise page count in pmbus_identify() caif_virtio: fix wrong pointer check in cfv_probe() HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove() mm/page_alloc: fix uninitialized variable rapidio: fix an API misues when rio_add_net() fails rapidio: add check for rio_add_net() in rio_scan_alloc_net() wifi: nl80211: reject cooked mode if it is set along with other flags wifi: cfg80211: regulatory: improve invalid hints checking x86/cpu: Properly parse CPUID leaf 0x2 TLB descriptor 0x63 x86/cpu: Validate CPUID leaf 0x2 EDX output x86/cacheinfo: Validate CPUID leaf 0x2 EDX output platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M ALSA: hda/realtek: update ALC222 depop optimize ALSA: hda: intel: Add Dell ALC3271 to power_save denylist HID: appleir: Fix potential NULL dereference at raw event handle Revert "of: reserved-memory: Fix using wrong number of cells to get property 'alignment'" drm/amdgpu: disable BAR resize on Dell G5 SE drm/amdgpu: Check extended configuration space register when system uses large bar drm/amdgpu: skip BAR resizing if the bios already did it acct: perform last write from workqueue kernel/acct.c: use dedicated helper to access rlimit values kernel/acct.c: use #elif instead of #end and #elif pfifo_tail_enqueue: Drop new packet when sch->limit == 0 sched/core: Prevent rescheduling when interrupts are disabled phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk usbnet: gl620a: fix endpoint checking in genelink_bind() perf/core: Fix low freq setting via IOC_PERIOD ftrace: Avoid potential division by zero in function_stat_show() x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systems ipvs: Always clear ipvs_property flag in skb_scrub_packet() ASoC: es8328: fix route from DAC to output net: cadence: macb: Synchronize stats calculations sunrpc: suppress warnings for unused procfs functions batman-adv: Ignore neighbor throughput metrics in error case acct: block access to kernel internal filesystems ALSA: hda/conexant: Add quirk for HP ProBook 450 G4 mute LED nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() power: supply: da9150-fg: fix potential overflow geneve: Suppress list corruption splat in geneve_destroy_tunnels(). geneve: Fix use-after-free in geneve_find_dev(). powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC ALSA: hda/realtek - Add type for ALC287 powerpc/64s: Rewrite __real_pte() and __rpte_to_hidx() as static inline powerpc/64s/mm: Move __real_pte stubs into hash-4k.h USB: gadget: f_midi: f_midi_complete to call queue_work usb/gadget: f_midi: Replace tasklet with work usb/gadget: f_midi: convert tasklets to use new tasklet_setup() API usb: dwc3: Fix timeout issue during controller enter/exit from halt state mm: update mark_victim tracepoints fields crypto: testmgr - some more fixes to RSA test vectors crypto: testmgr - populate RSA CRT parameters in RSA test vectors crypto: testmgr - fix version number of RSA tests crypto: testmgr - Fix wrong test case of RSA crypto: testmgr - fix wrong key length for pkcs1pad driver core: bus: Fix double free in driver API bus_register() scsi: storvsc: Set correct data length for sending SCSI command without payload vlan: move dev_put into vlan_dev_uninit vlan: introduce vlan_dev_free_egress_priority Revert "btrfs: avoid monopolizing a core when activating a swap file" parport_pc: add support for ASIX AX99100 can: ems_pci: move ASIX AX99100 ids to pci_ids.h nilfs2: protect access to buffers with no active references nilfs2: do not force clear folio if buffer is referenced nilfs2: do not output warnings when clearing dirty buffers alpha: replace hardcoded stack offsets with autogenerated ones ndisc: extend RCU protection in ndisc_send_skb() openvswitch: use RCU protection in ovs_vport_cmd_fill_info() arp: use RCU protection in arp_xmit() neighbour: use RCU protection in __neigh_notify() neighbour: delete redundant judgment statements ndisc: use RCU protection in ndisc_alloc_skb() ipv6: use RCU protection in ip6_default_advmss() ipv4: use RCU protection in inet_select_addr() ipv4: use RCU protection in rt_is_expired() net: add dev_net_rcu() helper net: treat possible_net_t net pointer as an RCU one and add read_pnet_rcu() partitions: mac: fix handling of bogus partition table gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock alpha: align stack for page fault and user unaligned trap handlers alpha: make stack 16-byte aligned (most cases) can: c_can: fix unbalanced runtime PM disable in error path USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828 usb: cdc-acm: Fix handling of oversized fragments usb: cdc-acm: Check control transfer buffer size before access USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk USB: hub: Ignore non-compliant devices with too many configs or interfaces usb: gadget: f_midi: fix MIDI Streaming descriptor lengths USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI usb: dwc2: gadget: remove of_node reference upon udc_stop usb: gadget: udc: renesas_usb3: Fix compiler warning usb: roles: set switch registered flag early on batman-adv: fix panic during interface removal ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V orangefs: fix a oob in orangefs_debug_write Grab mm lock before grabbing pt lock vfio/pci: Enable iowrite64 and ioread64 for vfio pci media: cxd2841er: fix 64-bit division on gcc-9 xen: remove a confusing comment on auto-translated guest I/O gpio: bcm-kona: Add missing newline to dev_err format string gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0 arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array team: better TEAM_OPTION_TYPE_STRING validation vrf: use RCU protection in l3mdev_l3_out() ndisc: ndisc_send_redirect() must use dev_get_by_index_rcu() HID: multitouch: Add NULL check in mt_input_configured ocfs2: check dir i_size in ocfs2_find_entry MIPS: ftrace: Declare ftrace_get_parent_ra_addr() as static ptp: Ensure info->enable callback is always set mtd: onenand: Fix uninitialized retlen in do_otp_read() NFC: nci: Add bounds checking in nci_hci_create_pipe() nilfs2: fix possible int overflows in nilfs_fiemap() ocfs2: handle a symlink read error correctly ocfs2: fix incorrect CPU endianness conversion causing mount failure nvmem: core: improve range check for nvmem_cell_write() crypto: qce - fix goto jump in error path media: uvcvideo: Remove redundant NULL assignment media: uvcvideo: Fix event flags in uvc_ctrl_send_events media: ov5640: fix get_light_freq on auto soc: qcom: smem_state: fix missing of_node_put in error path powerpc/pseries/eeh: Fix get PE state translation serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use serial: sh-sci: Drop __initdata macro for port_cfg usb: gadget: f_tcm: Don't prepare BOT write request twice usb: gadget: f_tcm: ep_autoconfig with fullspeed endpoint usb: gadget: f_tcm: Decrement command ref count on cleanup usb: gadget: f_tcm: Translate error to sense wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() HID: hid-sensor-hub: don't use stale platform-data on remove of: reserved-memory: Fix using wrong number of cells to get property 'alignment' of: Fix of_find_node_opts_by_path() handling of alias+path+options of: Correct child specifier used as input of the 2nd nexus node clk: qcom: clk-alpha-pll: fix alpha mode configuration Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc KVM: s390: vsie: fix some corner-cases when grabbing vsie pages KVM: Explicitly verify target vCPU is online in kvm_get_vcpu() arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma binfmt_flat: Fix integer overflow bug on 32 bit systems m68k: vga: Fix I/O defines s390/futex: Fix FUTEX_OP_ANDN implementation leds: lp8860: Write full EEPROM, not only half of it cpufreq: s3c64xx: Fix compilation warning tun: revert fix group permission check netem: Update sch->q.qlen before qdisc_tree_reduce_backlog() udp: gso: do not drop small packets when PMTU reduces tg3: Disable tg3 PCIe AER on system reboot firmware: iscsi_ibft: fix ISCSI_IBFT Kconfig entry nvme: handle connectivity loss in nvme_set_queue_count usb: xhci: Fix NULL pointer dereference on certain command aborts usb: xhci: Add timeout argument in address_device USB HCD callback media: uvcvideo: Remove dangling pointers media: uvcvideo: Only save async fh if success nilfs2: handle errors that nilfs_prepare_chunk() may return nilfs2: eliminate staggered calls to kunmap in nilfs_rename nilfs2: move page release outside of nilfs_delete_entry and nilfs_set_link x86/mm: Don't disable PCID when INVLPG has been fixed by microcode HID: Wacom: Add PCI Wacom device support mfd: lpc_ich: Add another Gemini Lake ISA bridge PCI device-id wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() mmc: core: Respect quirk_max_rate for non-UHS SDIO card tun: fix group permission check printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX sched: Don't try to catch up excess steal time. btrfs: convert BUG_ON in btrfs_reloc_cow_block() to proper error handling btrfs: output the reason for open_ctree() failure usb: gadget: f_tcm: Don't free command immediately media: uvcvideo: Fix double free in error path usb: typec: tcpm: set SRC_SEND_CAPABILITIES timeout to PD_T_SENDER_RESPONSE drivers/card_reader/rtsx_usb: Restore interrupt based detection ktest.pl: Check kernelrelease return in get_version NFSD: Reset cb_seq_status after NFS4ERR_DELAY hexagon: Fix unbalanced spinlock in die() hexagon: fix using plain integer as NULL pointer warning in cmpxchg genksyms: fix memory leak when the same symbol is read from *.symref file genksyms: fix memory leak when the same symbol is added from source net: sh_eth: Fix missing rtnl lock in suspend/resume path vsock: Allow retrying on connect() failure net: davicom: fix UAF in dm9000_drv_remove net: rose: fix timer races against user threads PM: hibernate: Add error handling for syscore_suspend() net: fec: implement TSO descriptor cleanup ubifs: skip dumping tnc tree when zroot is null dmaengine: ti: edma: fix OF node reference leaks in edma_driver module: Extend the preempt disabled section in dereference_symbol_descriptor(). ocfs2: mark dquot as inactive if failed to start trans while releasing dquot scsi: mpt3sas: Set ioc->manu_pg11.EEDPTagMode directly to 1 media: camif-core: Add check for clk_enable() media: mipi-csis: Add check for clk_enable() PCI: endpoint: Destroy the EPC device in devm_pci_epc_destroy() media: rc: iguanair: handle timeouts fbdev: omapfb: Fix an OF node leak in dss_of_port_get_parent_device() ARM: dts: mediatek: mt7623: fix IR nodename arm64: dts: mediatek: mt8173-evb: Fix MT6397 PMIC sub-node names arm64: dts: mediatek: mt8173-evb: Drop regulator-compatible property rdma/cxgb4: Prevent potential integer overflow on 32bit RDMA/mlx4: Avoid false error about access to uninitialized gids array perf report: Fix misleading help message about --demangle perf top: Don't complain about lack of vmlinux when not resolving some kernel samples padata: fix sysfs store callback check ktest.pl: Remove unused declarations in run_bisect_test function net: sched: Disallow replacing of child qdisc from one parent to another net/mlxfw: Drop hard coded max FW flash image size selftests: harness: fix printing of mismatch values in __EXPECT() selftests/harness: Display signed values correctly wifi: wlcore: fix unbalanced pm_runtime calls regulator: of: Implement the unwind path of of_regulator_match() team: prevent adding a device which is already a team device lower cpupower: fix TSC MHz calculation wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: remove unused dualmac control leftovers rtlwifi: replace usage of found with dedicated list iterator variable wifi: rtlwifi: usb: fix workqueue leak when probe fails wifi: rtlwifi: do not complete firmware loading needlessly drm/amdgpu: Fix potential NULL pointer dereference in atomctrl_get_smc_sclk_range_table drm/etnaviv: Fix page property being used for non writecombine buffers afs: Fix directory format encoding struct overflow: Allow mixed type arguments overflow: Correct check_shl_overflow() comment overflow: Add __must_check attribute to check_*() helpers udf: Fix use of check_add_overflow() with mixed type arguments CIP: Bump version suffix to -cip118 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.290. gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp(). arm64: dts: rockchip: add hevc power domain clock to rk3328 Partial revert of xhci: use pm_ptr() instead #ifdef for CONFIG_PM conditionals xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals Input: xpad - add support for wooting two he (arm) Input: xpad - add unofficial Xbox 360 wireless receiver clone Input: atkbd - map F23 key to support default copilot shortcut Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null" USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() vfio/platform: check the bounds of read/write syscalls net/xen-netback: prevent UAF in xenvif_flush_hash() m68k: Add missing mmap_read_lock() to sys_cacheflush() m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag irqchip/sunxi-nmi: Add missing SKIP_WAKE flag scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request ASoC: wm8994: Add depends on MFD core net: fix data-races around sk->sk_forward_alloc scsi: sg: Fix slab-use-after-free read in sg_release() ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev() irqchip/gic-v3: Handle CPU_PM_ENTER_FAILED correctly fs/proc: fix softlockup in __read_vmcore (part 2) poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll() hfs: Sanity check the root record mac802154: check local interfaces before deleting sdata list i2c: mux: demux-pinctrl: check initial mux selection, too nfp: bpf: prevent integer overflow in nfp_bpf_event_output() gtp: use exit_batch_rtnl() method net: add exit_batch_rtnl() method net: net_namespace: Optimize the code net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field() sctp: sysctl: rto_min/max: avoid using current->nsproxy ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv ocfs2: correct return value of ocfs2_local_free_info() phy: core: Fix that API devm_of_phy_provider_unregister() fails to unregister the phy provider phy: core: fix code style in devm_of_phy_provider_unregister arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399 arm64: dts: rockchip: fix defines in pd_vio node for rk3399 iio: inkern: call iio_device_put() only on mapped devices iio: adc: at91: call input_free_device() on allocated iio_dev iio: adc: ti-ads8688: fix information leak in triggered buffer iio: imu: kmx61: fix information leak in triggered buffer iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer iio: pressure: zpa2326: fix information leak in triggered buffer usb: gadget: f_fs: Remove WARN_ON in functionfs_bind usb: fix reference leak in usb_new_device() USB: usblp: return error when setting unsupported protocol usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null USB: serial: cp210x: add Phoenix Contact UPS Device usb-storage: Add max sectors quirk for Nokia 208 staging: iio: ad9832: Correct phase range check staging: iio: ad9834: Correct phase range check USB: serial: option: add Neoway N723-EA support USB: serial: option: add MeiG Smart SRM815 drm/amd/display: Add check for granularity in dml ceil/floor helpers sctp: sysctl: auth_enable: avoid using current->nsproxy sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy dm thin: make get_first_thin use rcu-safe list first function tcp/dccp: allow a connection when sk_max_ack_backlog is zero tcp/dccp: complete lockless accesses to sk->sk_max_ack_backlog net: 802: LLC+SNAP OID:PID lookup on start of skb data ieee802154: ca8210: Add missing check for kfifo_alloc() in ca8210_probe() dm array: fix cursor index when skipping across block boundaries dm array: fix unreleased btree blocks on closing a faulty array cursor dm array: fix releasing a faulty array block twice in dm_array_cursor_end jbd2: flush filesystem device before updating tail sequence ravb: Fix use-after-free issue in ravb_tx_timeout_work() net/sched: netem: fix backport of "account for backlog updates from child qdisc" CIP: Bump version suffix to -cip117 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.289. RDMA/bnxt_re: Fix max_qp_wrs reported net/sched: netem: account for backlog updates from child qdisc net/sched: cbs: Fix integer overflow in cbs_set_port_rate() netfilter: nft_set_hash: skip duplicated elements pending gc run drm/etnaviv: flush shader L1 cache after user commandstream usb: yurex: make waiting on yurex_write interruptible perf trace: Avoid garbage when not printing a syscall's arguments scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device mm: vmscan: account for free pages to prevent infinite Loop in throttle_direct_reclaim() drm: adv7511: Drop dsi single lane support net/sctp: Prevent autoclose integer overflow in sctp_association_init() sky2: Add device ID 11ab:4373 for Marvell 88E8075 pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking modpost: fix the missed iteration for the max bit in do_input() modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base net: usb: qmi_wwan: add Telit FE910C04 compositions sound: usb: format: don't warn that raw DSD is unsupported wifi: mac80211: wake the queues in case of failure in resume ila: serialize calls to nf_register_net_hooks() af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK af_packet: fix vlan_get_tci() vs MSG_PEEK ALSA: usb-audio: US16x08: Initialize array before use net: llc: reset skb->transport_header netrom: check buffer length before accessing it drm/bridge: adv7511_audio: Update Audio InfoFrame properly drm: bridge: adv7511: Enable SPDIF DAI RDMA/bnxt_re: Fix reporting hw_ver in query_device RDMA/bnxt_re: Add check for path mtu in modify_qp Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet selinux: ignore unknown extended permissions btrfs: avoid monopolizing a core when activating a swap file tracing: Constify string literal data member in struct trace_event_call MIPS: Probe toolchain support of -msym32 virtio-blk: don't keep queue frozen during system suspend platform/x86: asus-nb-wmi: Ignore unknown event 0xCF regmap: Use correct format specifier for logging range errors scsi: qla1280: Fix hw revision numbering for ISP1020/1040 tracing/kprobe: Make trace_kprobe's module callback called after jump_label update mtd: rawnand: fix double free in atmel_pmecc_create_user() dmaengine: at_xdmac: avoid null_prt_deref in at_xdmac_prep_dma_memset dmaengine: mv_xor: fix child node refcount handling in early exit phy: core: Fix that API devm_phy_destroy() fails to destroy the phy phy: core: Fix that API devm_phy_put() fails to release the phy phy: core: Fix an OF node refcount leakage in of_phy_provider_lookup() phy: core: Fix an OF node refcount leakage in _of_phy_get() mtd: diskonchip: Cast an operand to prevent potential overflow nfsd: restore callback functionality for NFSv4.0 bpf: Check negative offsets in __bpf_skb_min_len() media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg of: Fix error path in of_parse_phandle_with_args_map() nilfs2: prevent use of deleted inode of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one() NFS/pnfs: Fix a live lock between recalled layouts and layoutget zram: refuse to use zero sized block device as backing device sh: clk: Fix clk_enable() to return 0 on NULL clk USB: serial: option: add Telit FE910C04 rmnet compositions USB: serial: option: add MediaTek T7XX compositions USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready USB: serial: option: add MeiG Smart SLM770A USB: serial: option: add TCL IK512 MBIM & ECM efivarfs: Fix error on non-existent file i2c: riic: Always round-up when calculating bus period chelsio/chtls: prevent potential integer overflow on 32bit mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk netfilter: ipset: Fix for recursive locking warning net: ethernet: bgmac-platform: fix an OF node reference leak net: hinic: Fix cleanup in create_rxqs/txqs() net/smc: check sndbuf_space again after NOSPACE flag is set in smc_poll i2c: pnx: Fix timeout in wait functions PCI: Add ACS quirk for Broadcom BCM5760X NIC ALSA: usb: Fix UBSAN warning in parse_audio_unit() PCI/AER: Disable AER service on suspend net: sched: fix ordering of qlen adjustment ALSA: usb-audio: Fix a DMA to stack memory bug xen/netfront: fix crash when removing device KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status qca_spi: Make driver probing reliable ACPI: resource: Fix memory resource type union access net: lapb: increase LAPB_HEADER_LEN batman-adv: Do not let TT changes list grows indefinitely batman-adv: Remove uninitialized data in full table TT response batman-adv: Do not send uninitialized TT changes usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer usb: ehci-hcd: fix call balance of clocks handling routines usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys() usb: host: max3421-hcd: Correctly abort a USB request. bpf, xdp: Update devmap comments to reflect napi/rcu usage ALSA: usb-audio: Fix out of bounds reads when finding clock sources PCI: rockchip-ep: Fix address translation unit programming Revert "drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read()" modpost: Add .irqentry.text to OTHER_SECTIONS ocfs2: Revert "ocfs2: fix the la space leak when unmounting an ocfs2 volume" jffs2: Fix rtime decompressor jffs2: Prevent rtime decompress memory corruption KVM: arm64: vgic-its: Clear ITE when DISCARD frees an ITE KVM: arm64: vgic-its: Clear DTE when MAPD unmaps a device KVM: arm64: vgic-its: Add a data length check in vgic_its_save_* misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle powerpc/prom_init: Fixup missing powermac #size-cells usb: chipidea: udc: handle USB Error Interrupt if IOC not set PCI: Add 'reset_subordinate' to reset hierarchy below bridge nvdimm: rectify the illogical code within nd_dax_probe() scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset scsi: st: Don't modify unknown block number in MTIOCGET leds: class: Protect brightness_show() with led_cdev->led_access mutex tracing: Use atomic64_inc_return() in trace_clock_counter() netpoll: Use rcu_access_pointer() in __netpoll_setup rocker: fix link status detection in rocker_carrier_init() ASoC: hdmi-codec: reorder channel allocation list wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: ipw2x00: libipw_rx_any(): fix bad alignment jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree jfs: fix array-index-out-of-bounds in jfs_readdir jfs: fix shift-out-of-bounds in dbSplit jfs: array-index-out-of-bounds fix in dtReadFirst wifi: ath5k: add PCI ID for Arcadyan devices wifi: ath5k: add PCI ID for SX76X net: inet6: do not leave a dangling sk pointer in inet6_create() net: inet: do not leave a dangling sk pointer in inet_create() net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() net: af_can: do not leave a dangling sk pointer in can_create() Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() af_packet: avoid erroring out after sock_init_data() in packet_create() net: ethernet: fs_enet: Use %pa to format resource_size_t net: fec_mpc52xx_phy: Use %pa to format resource_size_t samples/bpf: Fix a resource leak drm/radeon/r600_cs: Fix possible int overflow in r600_packet3_check() media: cx231xx: Add support for Dexatek USB Video Grabber 1d19:6108 media: uvcvideo: Add a quirk for the Kaiweets KTI-W02 infrared camera s390/cpum_sf: Handle CPU hotplug remove during sampling regmap: detach regmap from dev on regmap_exit bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry() scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt scsi: qla2xxx: Supported speed displayed incorrectly for VPorts ocfs2: update seq_file index in ocfs2_dlm_seq_next tracing: Fix cmp_entries_dup() to respect sort() comparison rules HID: wacom: fix when get product name maybe null pointer bpf: Fix exact match conditions in trie_get_next_key() bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie ocfs2: free inode when ocfs2_get_init_inode() fails spi: mpc52xx: Add cancel_work_sync before module remove drm/sti: Add __iomem for mixer_dbg_mxn's parameter gpio: grgpio: Add NULL check in grgpio_probe gpio: grgpio: use a helper variable to store the address of ofdev->dev crypto: x86/aegis128 - access 32-bit arguments as 32-bit x86/asm: Reorder early variables xen: Fix the issue of resource not being properly released in xenbus_dev_probe() xen/xenbus: fix locking xenbus/backend: Protect xenbus callback with lock xenbus/backend: Add memory pressure handler callback xen/xenbus: reference count registered modules netfilter: ipset: Hold module reference while requesting a module igb: Fix potential invalid memory access in igb_init_module() net/qed: allow old cards not supporting "num_images" to work dccp: Fix memory leak in dccp_feat_change_recv net/ipv6: release expired exception dst cached in socket netfilter: x_tables: fix LED ID check in led_tg_check() ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init() can: sun4i_can: sun4i_can_err(): fix {rx,tx}_errors statistics can: sun4i_can: sun4i_can_err(): call can_change_state() even if cf is NULL watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur dm thin: Add missing destroy_work_on_stack() util_macros.h: fix/rework find_closest() macros ftrace: Fix regression with module command in stack_trace_filter ovl: Filter invalid inodes with missing lookup function media: gspca: ov534-ov772x: Fix off-by-one error in set_frame_rate() media: venus: Fix pm_runtime_set_suspended() with runtime pm enabled media: ts2020: fix null-ptr-deref in ts2020_probe() media: i2c: tc358743: Fix crash in the probe error path when using polling btrfs: ref-verify: fix use-after-free after invalid ref action quota: flush quota_release_work upon quota writeback SUNRPC: correct error code comment in xs_tcp_setup_socket() um/sysrq: remove needless variable sp ALSA: hda/realtek: Set PCBeep to default value for ALC274 Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: sh-sci: Clean sci_ports[0] after at earlycon exit ipmr: convert /proc handlers to rcu_read_lock() mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device mfd: intel_soc_pmic_bxtwc: Use dev_err_probe() x86/xen/pvh: Annotate indirect branch as safe CIP: Bump version suffix to -cip116 after merge from stable Mark this as 4.19.324-cip115 release. CIP: Bump version suffix to -cip114 after merge from stable Mark this as 4.19.322-cip113 release. CIP: Bump version suffix to -cip112 after merge from stable CIP: Bump version suffix to -cip111 after merge from stable CIP: Bump version suffix to -cip110 after merge from stable CIP: Bump version suffix to -cip109 after merge from stable CIP: Bump version suffix to -cip108 after merge from stable memory: renesas-rpc-if: Clear HS bit during hardware initialization arm64: dts: renesas: rzg2: Add RPC-IF Support spi: spi-rpc-if: Check return value of rpcif_sw_init() memory: renesas-rpc-if: Remove redundant division of dummy memory: renesas-rpc-if: Simplify single/double data register access memory: renesas-rpc-if: Drop usage of RPCIF_DIRMAP_SIZE macro memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode memory: renesas-rpc-if: fix possible NULL pointer dereference of resource CIP: Bump version suffix to -cip107 after merge from stable ravb: remove undocumented counter processing ravb: remove undocumented endianness selection ravb: update "undocumented" annotations CIP: Bump version suffix to -cip106 after merge from stable Mark this as 4.19.299-cip105 release. CIP: Bump version suffix to -cip104 after merge from stable CIP: Bump version suffix to -cip103 after merge from stable CIP: Bump version suffix to -cip102 after merge from stable CIP: Bump version suffix to -cip101 after merge from stable CIP: Bump version suffix to -cip100 after merge from stable CIP: Bump version suffix to -cip99 after merge from stable CIP: Bump version suffix to -cip98 after merge from stable CIP: Bump version suffix to -cip97 after merge from stable CIP: Bump version suffix to -cip96 after merge from stable CIP: Bump version suffix to -cip95 after merge from stable CIP: Bump version suffix to -cip94 after merge from stable CIP: Bump version suffix to -cip93 after merge from stable CIP: Bump version suffix to -cip92 after merge from stable CIP: Bump version suffix to -cip91 after merge from stable CIP: Bump version suffix to -cip90 after merge from stable CIP: Bump version suffix to -cip89 after merge from stable CIP: Bump version suffix to -cip88 after merge from stable CIP: Bump version suffix to -cip87 after merge from stable CIP: Bump version suffix to -cip86 after merge from stable CIP: Bump version suffix to -cip85 after merge from stable CIP: Bump version suffix to -cip84 after merge from stable CIP: Bump version suffix to -cip83 after merge from stable CIP: Bump version suffix to -cip82 after merge from stable CIP: Bump version suffix to -cip81 after merge from stable drm: rcar-du: Fix Alpha blending issue on Gen3 CIP: Bump version suffix to -cip80 after merge from stable CIP: Bump version suffix to -cip79 after merge from stable CIP: Bump version suffix to -cip78 after merge from stable CIP: Bump version suffix to -cip77 after merge from stable CIP: Bump version suffix to -cip76 after merge from stable CIP: Bump version suffix to -cip75 after merge from stable CIP: Bump version suffix to -cip74 after merge from stable CIP: Bump version suffix to -cip73 after merge from stable CIP: Bump version suffix to -cip72 after merge from stable CIP: Bump version suffix to -cip71 after merge from stable CIP: Bump version suffix to -cip70 after merge from stable CIP: Bump version suffix to -cip69 after merge from stable CIP: Bump version suffix to -cip68 after merge from stable CIP: Bump version suffix to -cip67 after merge from stable CIP: Bump version suffix to -cip66 after merge from stable CIP: Bump version suffix to -cip65 after merge from stable CIP: Bump version suffix to -cip64 after merge from stable CIP: Bump version suffix to -cip63 after merge from stable CIP: Bump version suffix to -cip62 after merge from stable CIP: Bump version suffix to -cip61 after merge from stable CIP: Bump version suffix to -cip60 after merge from stable CIP: Bump version suffix to -cip59 after merge from stable CIP: Bump version suffix to -cip58 after merge from stable CIP: Bump version suffix to -cip57 after merge from stable CIP: Bump version suffix to -cip56 after merge from stable CIP: Bump version suffix to -cip55 after merge from stable CIP: Bump version suffix to -cip54 after merge from stable CIP: Bump version suffix to -cip53 after merge from stable CIP: Bump version suffix to -cip52 after merge from stable CIP: Bump version suffix to -cip51 after merge from stable CIP: Bump version suffix to -cip50 after merge from stable CIP: Bump version suffix to -cip49 after merge from stable media: i2c: imx219: Balance runtime PM use-count media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream CIP: Bump version suffix to -cip48 after merge from stable drm: rcar-du: Fix crash when using LVDS1 clock for CRTC CIP: Bump version suffix to -cip47 after merge from stable CIP: Bump version suffix to -cip46 after merge from stable arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes media: rcar-csi2: Enable support for R8A774E1 media: dt-bindings: media: renesas,csi2: Add R8A774E1 support media: rcar-vin: Enable support for R8A774E1 media: dt-bindings: media: renesas,vin: Add R8A774E1 support arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support media: rcar-csi2: Enable support for R8A774B1 media: dt-bindings: rcar-csi2: Add R8A774B1 support media: rcar-vin: Enable support for R8A774B1 media: dt-bindings: rcar-vin: Add R8A774B1 support arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes media: rcar-csi2: Enable support for r8a774a1 media: dt-bindings: media: rcar-csi2: Add r8a774a1 support media: rcar-vin: Enable support for r8a774a1 media: dt-bindings: media: rcar_vin: Add r8a774a1 support arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1 media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size media: i2c: imx219: Selection compliance fixes media: i2c: imx219: Fix a bug in imx219_enum_frame_size media: i2c: imx219: Implement get_selection media: i2c: imx219: Add support for cropped 640x480 resolution media: i2c: imx219: Add support for RAW8 bit bayer format media: i2c: imx219: Fix power sequence media: i2c: Add driver for Sony IMX219 sensor media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format media: rcar-vin: Invalidate pipeline if conversion is not possible on input formats media: rcar-csi2: Update V3M and E3 start procedure media: rcar-vin: fix wrong return value in rvin_set_channel_routing() media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab media: v4l2-async: Log message in case of heterogeneous fwnode match media: v4l2-async: Pass notifier pointer to match functions media: v4l2-async: Accept endpoints and devices for fwnode matching media: device property: Add a function to test is a fwnode is a graph endpoint media: ov5645: Remove unneeded regulator_set_voltage() CIP: Bump version suffix to -cip45 after merge from stable CIP: Bump version suffix to -cip44 after merge from stable CIP: Bump version suffix to -cip43 after merge from stable CIP: Bump version suffix to -cip42 after merge from stable CIP: Bump version suffix to -cip41 after merge from stable spi: spi-mem: Make spi_mem_default_supports_op() static inline pinctrl: renesas: r8a77965: Add QSPI[01] pins, groups and functions pinctrl: renesas: r8a7796: Add QSPI[01] pins, groups and functions pinctrl: renesas: r8a77951: Add QSPI[01] pins, groups and functions pinctrl: renesas: r8a77990: Add QSPI[01] pins, groups and functions pinctrl: renesas: r8a77990: Optimize pinctrl image size for R8A774C0 pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A774B1 pinctrl: renesas: r8a77951: Optimize pinctrl image size for R8A774E1 pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A774A1 clk: renesas: r8a774c0: Add RPC clocks clk: renesas: r8a774b1: Add RPC clocks clk: renesas: r8a774a1: Add RPC clocks spi: rpc-if: Fix use-after-free on unbind spi: add Renesas RPC-IF driver spi: spi-mem: Fix a memory leak in spi_mem_dirmap_destroy() spi: spi-mem: Fix spi_mem_dirmap_destroy() kerneldoc spi: spi-mem: Add a new API to support direct mapping spi: spi-mem: Compute length only when needed spi: spi-mem: Fix passing zero to 'PTR_ERR' warning spi: spi-mem: fix reference leak in spi_mem_access_start spi: spi-mem: Split spi_mem_exec_op() code spi: spi-mem: export spi_mem_default_supports_op() spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum memory: renesas-rpc-if: Make rpcif_enable/disable_rpm() as static inline memory: renesas-rpc-if: Fix a node reference leak in rpcif_probe() memory: renesas-rpc-if: Fix unbalanced pm_runtime_enable in rpcif_{enable,disable}_rpm memory: renesas-rpc-if: Return correct value to the caller of rpcif_manual_xfer() memory: add Renesas RPC-IF driver dt-bindings: memory: document Renesas RPC-IF bindings dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support dt-bindings: PCI: rcar-pci-host: Document r8a774e1 bindings dt-bindings: PCI: rcar: Add device tree support for r8a774b1 dt-bindings: timer: renesas: tmu: Document r8a774e1 bindings dt-bindings: pci: rcar-pci-ep: Document missing interrupts property CIP: Bump version suffix to -cip40 after merge from stable arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels CIP: Bump version suffix to -cip39 after merge from stable arm64: dts: renesas: r8a774e1: Add audio support arm64: dts: renesas: r8a774e1: Add missing audio_clk_b CIP: Bump version suffix to -cip38 after merge from stable arm64: dts: renesas: r8a774e1: Add USB-DMAC and HSUSB device nodes arm64: dts: renesas: r8a774e1: Add USB3.0 device nodes arm64: dts: renesas: r8a774e1: Add USB2.0 phy and host (EHCI/OHCI) device nodes dt-bindings: dma: renesas,usb-dmac: Add binding for r8a774e1 dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support dt-bindings: sound: renesas, rsnd: Document r8a774e1 bindings arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display arm64: dts: renesas: r8a774e1: Add PWM device nodes dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support arm64: dts: renesas: r8a774e1-hihope-rzg2h: Setup DU clocks arm64: dts: renesas: r8a774e1: Add LVDS device node drm: rcar-du: lvds: Add support for R8A774E1 SoC dt-bindings: display: renesas,lvds: Document r8a774e1 bindings arm64: dts: renesas: r8a774e1: Populate HDMI encoder node dt-bindings: display: renesas,dw-hdmi: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Populate DU device node drm: rcar-du: Add support for R8A774E1 SoC dt-bindings: display: renesas,du: Document r8a774e1 bindings arm64: dts: renesas: r8a774e1: Add FDP1 device nodes arm64: dts: renesas: r8a774e1: Add VSP instances arm64: dts: renesas: r8a774e1: Add FCPF and FCPV instances arm64: dts: renesas: r8a774e1-hihope-rzg2h-ex: Enable sata misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller arm64: dts: renesas: r8a774e1: Add PCIe EP nodes dt-bindings: pci: rcar-pci-ep: Document r8a774e1 arm64: dts: renesas: r8a774e1: Add SATA controller node arm64: dts: renesas: r8a774e1: Add PCIe device nodes misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers arm64: dts: renesas: r8a774b1: Add PCIe EP nodes arm64: dts: renesas: r8a774a1: Add PCIe EP nodes arm64: dts: renesas: r8a774c0: Add PCIe EP node dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1 ata: sata_rcar: Fix DMA boundary mask arm64: dts: renesas: r8a774b1-hihope-rzg2n-ex: Enable sata arm64: dts: renesas: r8a774b1: Add SATA controller node dt-bindings: ata: sata_rcar: Add r8a774b1 support CIP: Bump version suffix to -cip37 after merge from stable misc: pci_endpoint_test: Add Device ID for RZ/G2E PCIe controller arm64: defconfig: Enable R-Car PCIe endpoint driver PCI: rcar: Add endpoint mode support dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller PCI: rcar: Fix calculating mask for PCIEPAMR register PCI: rcar: Move shareable code to a common file arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: Add support to handle multiple base for mapping outbound memory PCI: endpoint: Pass page size as argument to pci_epc_mem_init() PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments PCI: pci-epf-test: Add support to defer core initialization PCI: endpoint: Add notification for core init completion PCI: endpoint: Add core init notifying feature PCI: endpoint: Assign function number for each PF in EPC core PCI: endpoint: Protect concurrent access to pci_epf_ops with mutex PCI: endpoint: Replace spinlock with mutex PCI: endpoint: Use notification chain mechanism to notify EPC events to EPF tools: PCI: Fix fd leakage tools: PCI: Exit with error code when test fails PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix clearing start entry in configfs PCI: endpoint: Cast the page number to phys_addr_t PCI: endpoint: Clear BAR before freeing its space PCI: endpoint: Skip odd BAR when skipping 64bit BAR PCI: endpoint: Allocate enough space for fixed size BAR PCI: endpoint: Set endpoint controller pointer to NULL PCI: endpoint: Add support to specify alignment for buffers allocated to BARs PCI: endpoint: Fix a potential NULL pointer dereference PCI: endpoint: Remove features member in struct pci_epc PCI: designware-plat: Remove setting epc->features in Designware plat EP driver PCI: rockchip: Remove pci_epf_linkup() from Rockchip EP driver PCI: cadence: Remove pci_epf_linkup() from Cadence EP driver PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features PCI: pci-epf-test: Do not allocate next BARs memory if current BAR is 64Bit PCI: pci-epf-test: Remove setting epf_bar flags in function driver PCI: endpoint: Fix pci_epf_alloc_space() to set correct MEM TYPE flags PCI: endpoint: Add helper to get first unreserved BAR PCI: cadence: Populate ->get_features() cdns_pcie_epc_ops PCI: rockchip: Populate ->get_features() dw_pcie_ep_ops PCI: pci-dra7xx: Populate ->get_features() dw_pcie_ep_ops PCI: designware-plat: Populate ->get_features() dw_pcie_ep_ops PCI: dwc: Add ->get_features() callback function to dw_pcie_ep_ops PCI: endpoint: Add new pci_epc_ops to get EPC features CIP: Bump version suffix to -cip36 after merge from stable with ravb fix Revert "ravb: Fixed to be able to unload modules" CIP: Bump version suffix to -cip35 after merge from stable CIP: Bump version suffix to -cip34 after merge from stable arm64: dts: renesas: Fix SD Card/eMMC interface device node names arm64: dts: renesas: r8a774e1: Add RWDT node dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support arm64: dts: renesas: r8a774e1: Add MSIOF nodes spi: renesas,sh-msiof: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support dt-bindings: i2c: renesas,iic: Document r8a774e1 support dt-bindings: i2c: renesas,i2c: Document r8a774e1 support arm64: dts: renesas: r8a774e1: Add SDHI nodes mmc: renesas_sdhi_internal_dmac: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774e1: Add CAN[FD] support can: rcar_can: Remove unused platform data support arm64: dts: renesas: r8a774e1: Add TMU device nodes arm64: dts: renesas: r8a774e1: Add CMT device nodes arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/rcar_gen3: Fix undefined temperature if negative thermal: rcar_gen3_thermal: Generate interrupt when temperature changes thermal: rcar_gen3_thermal: Remove temperature bound arm64: dts: renesas: r8a774e1: Add operating points arm64: dts: renesas: r8a774e1: Add Ethernet AVB node arm64: dts: renesas: r8a774e1: Add GPIO device nodes arm64: dts: renesas: r8a774e1: Add SYS-DMAC device nodes dt-bindings: dma: renesas,rcar-dmac: Document R8A774E1 bindings arm64: dts: renesas: r8a774e1: Add IPMMU device nodes iommu/ipmmu-vmsa: Hook up R8A774E1 DT matching code dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support arm64: dts: renesas: Add HiHope RZ/G2H sub board support arm64: dts: renesas: Add HiHope RZ/G2H main board support dt-bindings: arm: renesas: Add HopeRun RZ/G2H boards arm64: dts: renesas: Initial r8a774e1 SoC device tree pinctrl: sh-pfc: pfc-r8a77951: Add R8A774E1 PFC support dt-bindings: pinctrl: sh-pfc: Document r8a774e1 PFC support pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: sh-pfc: pfc-r8a7795: Fix typo in pinmux macro for SCL3 pinctrl: sh-pfc: pfc-r8a7795-es1: Fix typo in pinmux macro for SCL3 pinctrl: sh-pfc: r8a7795: Use new macros for non-GPIO pins pinctrl: sh-pfc: r8a7795-es1: Use new macros for non-GPIO pins pinctrl: sh-pfc: r8a7795: Add TPU pins, groups and functions pinctrl: sh-pfc: r8a7795-es1: Add TPU pins, groups and functions pinctrl: sh-pfc: rcar-gen3: Rename RTS{0,1,3,4}# pin function definitions pinctrl: sh-pfc: rcar-gen3: Retain TDSELCTRL register across suspend/resume pinctrl: sh-pfc: r8a7795: Deduplicate VIN5 pin definitions pinctrl: sh-pfc: r8a7795: Add I2C{0,3,5} pins, groups and functions pinctrl: sh-pfc: r8a7795-es1: Add I2C{0,3,5} pins, groups and functions pinctrl: sh-pfc: r8a7795: Fix VIN versioned groups pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias control arm64: defconfig: Enable R8A774E1 SoC clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: renesas: rzg2: Mark RWDT clocks as critical clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks clk: renesas: Add r8a774e1 CPG Core Clock Definitions clk: renesas: rcar-gen3: Add RPC clocks soc: renesas: rcar-rst: Add support for RZ/G2H dt-bindings: reset: rcar-rst: Document r8a774e1 reset module soc: renesas: Identify RZ/G2H dt-bindings: arm: renesas: Document RZ/G2H SoC DT bindings soc: renesas: Add Renesas R8A774E1 config option soc: renesas: rcar-sysc: Add r8a774e1 support dt-bindings: power: renesas,rcar-sysc: Document r8a774e1 SYSC binding dt-bindings: power: Add r8a774e1 SYSC power domain definitions arm64: dts: renesas: r8a774a1: Remove audio port node arm64: dts: renesas: Add HiHope RZ/G2N Rev2.0/3.0/4.0 board with idk-1110wr display arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 sub board support arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 main board support arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 board with idk-1110wr display arm64: dts: renesas: hihope-rzg2-ex: Separate out lvds specific nodes into common file arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 sub board support arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 main board support arm64: dts: renesas: Add HiHope RZ/G2M[N] Rev.3.0/4.0 specific into common file arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-rev2.dtsi file arm64: dts: renesas: r8a774b1-hihope-rzg2n[-ex]: Rename HiHope RZ/G2N boards arm64: dts: renesas: r8a774a1-hihope-rzg2m[-ex/-ex-idk-1110wr]: Rename HiHope RZ/G2M boards CIP: Bump version suffix to -cip33 after merge from stable drm: atomic helper: fix W=1 warnings drm: Add drm_atomic_get_old/new_private_obj_state drm: of: Fix linking when CONFIG_OF is not set CIP: Bump version suffix to -cip32 after merge from stable drm: of: Fix double-free bug CIP: Bump version suffix to -cip31 after merge from stable arm64: dts: renesas: Add EK874 board with idk-2121wr display support dt-bindings: display: Add idk-2121wr binding arm64: dts: renesas: rzg2: Add reset control properties for display arm64: dts: renesas: r8a774c0: Point LVDS0 to its companion LVDS1 drm: rcar-du: lvds: Allow for even and odd pixels swap drm: rcar-du: lvds: Get dual link configuration from DT drm: of: Add drm_of_lvds_get_dual_link_pixel_order drm: rcar-du: lvds: Improve identification of panels drm: rcar-du: lvds: Get mode from state drm: Add atomic variants for bridge enable/disable drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers drm: rcar_lvds: Fix dual link mode operations drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode drm: rcar-du: lvds: Add support for dual-link mode dt-bindings: display: renesas: lvds: Add renesas,companion property drm: bridge: Add dual_link field to the drm_bridge_timings structure drm: rcar-du: lvds: Remove LVDS double-enable checks arm64: defconfig: Enable additional support for Renesas platforms ASoC: rsnd: fixup SSI clock during suspend/resume modes CIP: Bump version suffix to -cip30 after merge from stable CIP: Bump version suffix to -cip29 after merge from stable CIP: Bump version suffix to -cip28 after merge from stable CIP: Bump version suffix to -cip27 after merge from stable CIP: Bump version suffix to -cip26 after merge from stable CIP: Bump version suffix to -cip25 after merge from stable arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display dt-bindings: display: Add idk-1110wr binding CIP: Bump version suffix to -cip24 after merge from stable CIP: Bump version suffix to -cip23 after merge from stable CIP: Bump version suffix to -cip22 after merge from stable CIP: Bump version suffix to -cip21 after merge from stable arm64: dts: renesas: cat874: Enable usb role switch support arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node usb: gadget: udc: renesas_usb3: Enhance role switch support usb: typec: fix an IS_ERR() vs NULL bug in hd3ss3220_probe() usb: typec: hd3ss3220: hd3ss3220_probe() warn: passing zero to 'PTR_ERR' usb: typec: add dependency for TYPEC_HD3SS3220 usb: typec: hd3ss3220_irq() can be static usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller dt-bindings: usb: renesas_usb3: Document usb role switch support dt-bindings: usb: hd3ss3220 device tree binding document usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h device connection: Find connections also by checking the references device property: Introduce fwnode_find_reference() device connection: Find device connections also from device graphs device connection: Prepare support for firmware described connections usb: typec: Find the ports by also matching against the device node usb: roles: Find the muxes by also matching against the device node usb: typec: mux: Fix unsigned comparison with less than zero usb: typec: mux: Find the muxes by also matching against the device node device connection: Add fwnode member to struct device_connection CIP: Bump version suffix to -cip20 after merge from stable arm64: dts: renesas: r8a774b1: Add USB3.0 device nodes arm64: dts: renesas: r8a774b1: Add USB-DMAC and HSUSB device nodes arm64: dts: renesas: r8a774b1: Add USB2.0 phy and host (EHCI/OHCI) device nodes dt-bindings: usb: renesas_usb3: Document r8a774b1 support dt-bindings: usb: renesas_gen3: Rename bindings documentation file to reflect IP block dt-bindings: usb-xhci: Add r8a774b1 support dt-bindings: rcar-gen3-phy-usb3: Add r8a774b1 support dt-bindings: usb: renesas_usbhs: Add r8a774b1 support dt-bindings: usb: renesas_usbhs: Rename bindings documentation file dt-bindings: dmaengine: usb-dmac: Add binding for r8a774b1 dt-bindings: rcar-gen3-phy-usb2: Add r8a774b1 support arm64: dts: renesas: r8a774b1: Add Sound and Audio DMAC device nodes ASoC: rsnd: Document r8a774b1 bindings arm64: dts: renesas: r8a774a1: Remove audio port node arm64: dts: renesas: Add support for Advantech idk-1110wr LVDS panel arm64: dts: renesas: hihope-rzg2-ex: Add LVDS support drm: rcar-du: lvds: Add r8a774b1 support arm64: dts: renesas: hihope-rzg2-ex: Enable backlight arm64: dts: renesas: r8a774b1: Add PWM device nodes arm64: dts: renesas: r8a774b1: Add FDP1 device nodes arm64: dts: renesas: r8a774b1-hihope-rzg2n: Add display clock properties arm64: dts: renesas: r8a774b1: Add HDMI encoder instance arm64: dts: renesas: r8a774b1: Add DU device to DT drm: rcar-du: Add R8A774B1 support arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi arm64: dts: renesas: r8a774b1: Connect Ethernet-AVB to IPMMU-DS0 arm64: dts: renesas: r8a774b1: Tie SYS-DMAC to IPMMU-DS0/1 arm64: dts: renesas: r8a774b1: Add VSP instances arm64: dts: renesas: r8a774b1: Add FCPF and FCPV instances arm64: dts: renesas: r8a774b1: Add IPMMU device nodes iommu/ipmmu-vmsa: Hook up r8a774b1 DT matching code dt-bindings: iommu: ipmmu-vmsa: Add r8a774b1 support arm64: dts: renesas: r8a774b1: Add CAN and CAN FD support dt-bindings: can: rcar_canfd: document r8a774b1 support dt-bindings: can: rcar_can: document r8a774b1 support arm64: dts: renesas: r8a774b1: Add TMU device nodes clk: renesas: r8a774b1: Add TMU clock dt-bindings: timer: renesas: tmu: Document r8a774b1 bindings arm64: dts: renesas: r8a774b1: Add CMT device nodes dt-bindings: timer: renesas, cmt: Document r8a774b1 CMT support arm64: dts: renesas: r8a774b1: Add RZ/G2N thermal support thermal: rcar_gen3_thermal: Add r8a774b1 support dt-bindings: thermal: rcar-gen3-thermal: Add r8a774b1 support arm64: dts: renesas: r8a774b1: Add OPPs table for cpu devices arm64: dts: renesas: r8a774b1: Add I2C and IIC-DVFS support dt-bindings: i2c: sh_mobile: Add r8a774b1 support dt-bindings: i2c: sh_mobile: Rename bindings documentation file dt-bindings: i2c: rcar: Add r8a774b1 support dt-bindings: i2c: rcar: Rename bindings documentation file arm64: dts: renesas: r8a774b1-hihope-rzg2n: Enable HS400 mode arm64: dts: renesas: r8a774b1: Add SDHI support mmc: renesas_sdhi_internal_dmac: Add r8a774b1 support dt-bindings: mmc: renesas_sdhi: Add r8a774b1 support arm64: dts: renesas: r8a774b1: Add INTC-EX device node arm64: dts: renesas: hihope-rzg2-ex: Let the board specific DT decide about pciec1 arm64: dts: renesas: r8a774b1: Add PCIe device nodes arm64: dts: renesas: r8a774b1: Add all MSIOF nodes arm64: dts: renesas: r8a774b1: Add RWDT node dt-bindings: watchdog: renesas-wdt: Document r8a774b1 support dt-bindings: watchdog: Rename bindings documentation file dt-bindings: spi: sh-msiof: Add r8a774b1 support arm64: dts: renesas: Add HiHope RZ/G2N sub board support arm64: dts: renesas: r8a774b1: Add Ethernet AVB node dt-bindings: net: ravb: Add support for r8a774b1 SoC arm64: dts: renesas: r8a774b1: Add GPIO device nodes dt-bindings: gpio: rcar: Add DT binding for r8a774b1 arm64: dts: renesas: r8a774b1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774b1: Add SYS-DMAC device nodes dt-bindings: dmaengine: rcar-dmac: Document R8A774B1 bindings CIP: Bump version suffix to -cip19 after merge from stable arm64: dts: renesas: r8a774c0: cat874: Sort nodes arm64: dts: renesas: Use ip=on for bootargs arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V regulator arm64: dts: renesas: Update 'vsps' properties for readability arm64: dts: renesas: r8a774c0: Fix register range of display node arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01] arm64: dts: renesas: r8a774c0: Clean up CPU compatibles arm64: dts: renesas: r8a774c0: Add dynamic power coefficient arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM] dt-bindings: can: rcar_can: document r8a77965 support CIP: Bump version suffix to -cip18 after merge from stable CIP: Bump version suffix to -cip17 after merge from stable arm64: defconfig: Enable R8A774B1 SoC arm64: dts: renesas: Add HiHope RZ/G2N main board support arm64: dts: renesas: Initial r8a774b1 SoC device tree dt-bindings: serial: sh-sci: Document r8a774b1 bindings pinctrl: sh-pfc: pfc-r8a77965: Fix typo in pinmux macro for SCL3 pinctrl: sh-pfc: r8a77965: Add R8A774B1 PFC support dt-bindings: pinctrl: sh-pfc: Document r8a774b1 PFC support pinctrl: sh-pfc: r8a77965: Use new macros for non-GPIO pins pinctrl: sh-pfc: r8a77965: Add TPU pins, groups and functions pinctrl: sh-pfc: r8a77965: Add I2C{0,3,5} pins, groups and functions pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3 pinctrl: sh-pfc: r8a77965: Add CAN FD pins, groups and functions pinctrl: sh-pfc: r8a77965: Add CAN pins, groups and functions pinctrl: sh-pfc: r8a77965: Add VIN[4|5] groups/functions pinctrl: sh-pfc: r8a77965: Add Audio SSI pin support pinctrl: sh-pfc: r8a77965: Add Audio clock pin support pinctrl: sh-pfc: r8a77965: Add SATA pins, groups and functions clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding dt-bindings: clk: Add r8a774b1 CPG Core Clock Definitions soc: renesas: rcar-rst: Add support for RZ/G2N dt-bindings: reset: rcar-rst: Document r8a774b1 reset module soc: renesas: rcar-sysc: Add r8a774b1 support soc: renesas: r8a774c0-sysc: Fix power request conflicts soc: renesas: r8a77990-sysc: Fix power request conflicts soc: renesas: r8a77980-sysc: Fix power request conflicts soc: renesas: r8a77970-sysc: Fix power request conflicts soc: renesas: r8a77965-sysc: Fix power request conflicts soc: renesas: r8a7796-sysc: Fix power request conflicts soc: renesas: r8a7795-sysc: Fix power request conflicts soc: renesas: rcar-sysc: Prepare for fixing power request conflicts dt-bindings: power: rcar-sysc: Document r8a774b1 sysc dt-bindings: power: Add r8a774b1 SYSC power domain definitions soc: renesas: Identify RZ/G2N soc: renesas: Add Renesas R8A774B1 config option dt-bindings: arm: renesas: Add HopeRun RZ/G2N boards dt-bindings: arm: renesas: Document RZ/G2N SoC DT bindings CIP: Bump version suffix to -cip16 after merge from stable CIP: Bump version suffix to -cip15 after merge from stable gitlab-ci: Use external linux-cip-pipelines repository to define CI arm64: dts: renesas: r8a774a1: Add SSIU support for sound ASoC: rsnd: add SSIU BUSIF support ASoC: rsnd: add .get_id/.get_id_sub ASoC: rsnd: move .get_status under rsnd_mod_ops ASoC: rsnd: merge .nolock_start and .prepare ASoC: rsnd: ssiu: Support to init different BUSIF instance ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0 ASoc: rsnd: dma: Calculate PDMACHCRE with consider of BUSIF ASoc: rsnd: dma: Calculate dma address with consider of BUSIF ASoC: rsnd: ssi: Check runtime channel number rather than hw_params ASoC: rsnd: ssi: Fix issue in dma data address assignment ASoC: rsnd: remove is_play parameter from hw_rule function ASoC: rsnd: add support for 8 bit S8 format ASoC: rsnd: add support for 16/24 bit slot widths ASoC: rsnd: add warning message to rsnd_kctrl_accept_runtime() CIP: Bump version suffix to -cip14 after merge from stable gitlab-ci: Remove test timeout gitlab-ci: Remove unofficial build configurations gitlab-ci: Split tests into separate jobs CIP: Bump version suffix to -cip13 after merge from stable arm64: dts: renesas: hihope-rzg2-ex: Enable CAN interfaces arm64: dts: renesas: r8a774a1: Add CANFD support arm64: dts: renesas: r8a774a1: Add missing assigned-clocks for CAN[01] dt-bindings: can: rcar_canfd: document r8a774a1 support arm64: dts: renesas: hihope-common: Add HDMI audio support arm64: dts: renesas: r8a774a1: Use extended audio dmac registers arm64: dts: renesas: cat874: Add BT support arm64: dts: renesas: cat874: Add WLAN support arm64: dts: renesas: hihope-common: Add WLAN support arm64: dts: renesas: hihope-common: Add BT support arm64: dts: renesas: hihope-common: Add PCA9654 I/O expander CIP: Bump version suffix to -cip12 after merge from stable arm64: dts: renesas: r8a774c0: Add CANFD support dt-bindings: can: rcar_canfd: document r8a774c0 support arm64: dts: renesas: cat874: Add HDMI audio arm64: dts: renesas: cat874: Add HDMI video support arm64: defconfig: Enable TDA19988 arm64: dts: renesas: r8a774c0: Add display output support media: use strscpy() instead of strlcpy() drm: rcar-du: Replace EXT_CTRL_REGS feature flag with generation check drm: rcar-du: Disable unused DPAD outputs drm/rcar-du: Use drm_fbdev_generic_setup() drm: rcar-du: Reject modes that fail CRTC timing requirements drm: rcar-du: Fix external clock error checks drm: rcar-du: Fix vblank initialization drm: rcar-du: Fix the return value in case of error in 'rcar_du_crtc_set_crc_source()' drm/rcar-du: Replace drm_dev_unref with drm_dev_put drm: rcar-du: Enable configurable DPAD0 routing on Gen3 drm: rcar-du: Improve non-DPLL clock selection drm: rcar-du: lvds: Adjust operating frequency for D3 and E3 drm: rcar-du: lvds: Fix post-DLL divider calculation drm: rcar-du: Turn LVDS clock output on/off for DPAD0 output on D3/E3 drm: rcar-du: lvds: Add API to enable/disable clock output drm: rcar-du: lvds: Don't fail probe if output is not connected on D3/E3 drm: rcar-du: Simplify encoder registration drm: rcar-du: Move CRTC outputs bitmask to private CRTC state drm: rcar-du: lvds: add R8A774C0 support drm: rcar-du: Add r8a774c0 device support drm: rcar-du: Use LVDS PLL clock as dot clock when possible drm: rcar-du: Perform the initial CRTC setup from rcar_du_crtc_get() drm: rcar-du: lvds: D3/E3 support dt-bindings: display: renesas: lvds: Document r8a774c0 bindings dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocks dt-bindings: display: renesas: du: Document r8a774c0 bindings media: dt-bindings: media: renesas-fcp: Add RZ/G2 support media: vsp1: Add RZ/G support CIP: Bump version suffix to -cip11 after merge from stable gitlab-ci: Always store job artifacts gitlab-ci: Increase test timeout to 60 minutes arm64: dts: renesas: hihope-common: Add HDMI support arm64: dts: renesas: r8a774a1: Add HDMI encoder instance arm64: dts: renesas: r8a774a1: Connect Ethernet-AVB to IPMMU-DS0 arm64: dts: renesas: r8a774a1: Tie Audio-DMAC to IPMMU-MP arm64: dts: renesas: r8a774a1: Tie SYS-DMAC to IPMMU-DS0/1 arm64: dts: renesas: r8a774a1: Add FDP1 instance arm64: dts: renesas: r8a774a1: Add DU device to DT arm64: dts: renesas: r8a774a1: Add VSP instances arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support arm64: dts: renesas: hihope-common: Declare pcie bus clock arm64: dts: renesas: r8a774a1: Add PCIe device nodes drm: rcar-du: Update framebuffer pitch and alignment limits for Gen3 drm: rcar-du: Store V4L2 fourcc in rcar_du_format_info structure drm: rcar-du: Add support for missing pixel formats drm: rcar-du: Rename and document dpll_ch field drm: rcar-du: Rework clock configuration based on hardware limits drm: rcar-du: Support interlaced video output through vsp1 drm: rcar-du: Don't use TV sync mode when not supported by the hardware drm: rcar-du: Cache DSYSR value to ensure known initial value drm: rcar-du: Add interlaced feature flag drm: rcar-du: Refactor Feature and Quirk definitions drm: rcar-du: dw-hdmi: Reject modes with a too high clock frequency drm: rcar-du: lvds: Add r8a774a1 support drm: rcar-du: Add R8A774A1 support PCI: rcar: Do not shadow the 'irq' variable PCI: rcar: Clean up debug messages PCI: rcar: Replace various variable types with unsigned ones for register values PCI: rcar: Replace unsigned long with u32/unsigned int in register accessors dt-bindings: display: renesas: Add r8a774a1 support dt-bindings: display: renesas: lvds: Document r8a774a1 bindings dt-bindings: display: renesas: du: Document the r8a774a1 bindings dt-bindings: PCI: rcar: Add device tree support for r8a774a1 CIP: Bump version suffix to -cip10 after merge from stable arm64: dts: renesas: hihope-common: Enable USB3.0 arm64: dts: renesas: hihope-common: Add USB 2.0 support arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks phy: renesas: rcar-gen3-usb2: fix imbalance powered flag arm64: dts: renesas: hihope-common: Remove "label" from LEDs arm64: dts: renesas: hihope-common: Add LEDs support arm64: dts: renesas: hihope-common: Add uSD and eMMC mmc: renesas_sdhi: prevent overflow for max_req_size mmc: tmio: introduce macro for max block size mmc: renesas_sdhi: Change HW adjustment register according to speed mode arm64: dts: renesas: r8a774a1: Add dynamic power coefficient arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC arm64: dts: renesas: r8a774a1: Add operating points thermal: rcar_gen3_thermal: Update temperature conversion method thermal: rcar_gen3_thermal: Update calculation formula of IRQTEMP thermal: rcar_gen3_thermal: Update value of Tj_1 thermal: rcar_gen3_thermal: Fix to show correct trip points number thermal: rcar_gen3_thermal: fix interrupt type thermal: rcar_gen3_thermal: Fix init value of IRQCTL register thermal: rcar_gen3_thermal: Register hwmon sysfs interface arm64: dts: renesas: r8a774a1: Add TMU device nodes clk: renesas: r8a774a1: Add TMU clock arm64: dts: renesas: r8a774a1: Add CMT device nodes arm64: dts: renesas: hihope-common: Add RWDT support watchdog: renesas_wdt: Add a few cycles delay watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly watchdog: renesas_wdt: drop superfluous glob pattern watchdog: renesas_wdt: don't keep timer value during suspend/resume watchdog: renesas_wdt: Fix typos watchdog: renesas_wdt: stop when unregistering arm64: dts: renesas: Add HiHope RZ/G2M sub board support arm64: dts: renesas: hihope-common: Add pincontrol support to scif2/scif clock arm64: dts: renesas: Add HiHope RZ/G2M main board support dt-bindings: Add vendor prefix for HopeRun dt-bindings: arm: renesas: Add HopeRun RZ/G2[M] boards gitlab-ci: Start testing the r8a774a1-hihope-rzg2m-ex device arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string arm64: dts: renesas: r8a774a1: Fix hsusb reg size arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Replace clock magic numbers arm64: dts: renesas: r8a774a1: Replace power magic numbers arm64: dts: renesas: r8a774a1: Add CAN nodes arm64: dts: renesas: Remove unneeded status from thermal nodes arm64: dts: renesas: Fix whitespace around assignments arm64: dts: renesas: r8a774a1: Add USB3.0 device nodes arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB device nodes arm64: dts: renesas: r8a774a1: Add USB2.0 phy and host(EHCI/OHCI) device nodes arm64: dts: renesas: r8a774a1: Add FCPF and FCPV instances arm64: dts: renesas: r8a774a1: Add audio support arm64: dts: renesas: r8a774a1: Add PWM device nodes arm64: dts: renesas: r8a774a1: Add Cortex-A53 CPU cores arm64: dts: renesas: r8a774a1: Add all MSIOF nodes arm64: dts: renesas: r8a774a1: Add IPMMU device nodes arm64: dts: renesas: r8a774a1: Add RZ/G2M thermal support arm64: dts: renesas: r8a774a1: Add I2C and IIC-DVFS support arm64: dts: renesas: r8a774a1: Add SDHI nodes arm64: dts: renesas: r8a774a1: Add GPIO device nodes arm64: dts: renesas: r8a774a1: Add pinctrl device node arm64: dts: renesas: r8a774a1: Add RWDT node arm64: dts: renesas: r8a774a1: Add Ethernet AVB node arm64: dts: renesas: r8a774a1: Add INTC-EX device node arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774a1: Add SYS-DMAC controller nodes arm64: dts: renesas: Initial r8a774a1 SoC device tree mmc: renesas_sdhi_internal_dmac: set scatter/gather max segment size ravb: Avoid unsupported internal delay mode for R-Car E3/D3 ravb: remove tx buffer addr 4byte alilgnment restriction for R-Car Gen3 spi: sh-msiof: fix deferred probing dmaengine: rcar-dmac: Update copyright information dmaengine: rcar-dmac: set scatter/gather max segment size serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete() serial: sh-sci: Extract sci_dma_rx_reenable_irq() serial: sh-sci: Extract sci_dma_rx_chan_invalidate() serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback soc: renesas: rcar-sysc: Fix power domain control after system resume soc: renesas: rcar-sysc: Merge PM Domain registration and linking soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers clk: renesas: cpg-mssr: Remove error messages on out-of-memory conditions clk: renesas: cpg-mssr: Use genpd of_node instead of local copy gpio: rcar: Pedantic formatting gpio: rcar: select General Output Register to set output states gpio: rcar: reference device instead of platform device thermal: rcar_gen3_thermal: Add r8a774a1 support dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1 dt-bindings: thermal: rcar-gen3-thermal: Add r8a774a1 support dt-bindings: usb: renesas_usbhs: Add r8a774a1 support dt-bindings: usb-xhci: Add r8a774c0 support dt-bindings: usb-xhci: Add r8a774a1 support dt-bindings: rcar-gen3-phy-usb3: Add r8a774a1 support dt-bindings: can: rcar_can: Add r8a774c0 support dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks dt-bindings: can: rcar_can: Add r8a774a1 support pinctrl: sh-pfc: sh73a0: Use new macros for non-GPIO pins pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: r8a7791: Fix VIN1 versioned groups pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group pinctrl: sh-pfc: r8a77995: Remove unused PINMUX_IPSR_{MSEL2,PHYS}() pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group pinctrl: sh-pfc: r8a7796: Remove placeholder I2C pin data pinctrl: sh-pfc: r8a7796: Use new macros for non-GPIO pins pinctrl: sh-pfc: r8a7796: Add TPU pins, groups and functions pinctrl: sh-pfc: r8a77990: Use new macros for non-GPIO pins pinctrl: sh-pfc: Move PIN_NONE to shared header file pinctrl: sh-pfc: Add PORT_GP_27 helper macro pinctrl: sh-pfc: rcar-gen3: Rename SEL_NDFC to SEL_NDF pinctrl: sh-pfc: rcar-gen3: Rename RTS{0,1,3,4}# pin function definitions pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit30 when using SSI_SCK2 and SSI_WS2 pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit31 when using SIM0_D pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_N pinctrl: sh-pfc: rcar-gen3: Rename SEL_ADG_{A,B,C} to SEL_ADG{A,B,C} pinctrl: sh-pfc: rcar-gen3: Remove CC5_OSCOUT pin pinctrl: sh-pfc: rcar-gen3: Remove HDMI CEC pins, groups, and functions pinctrl: sh-pfc: Add missing #include <linux/errno.h> pinctrl: sh-pfc: rcar-gen3: Retain TDSELCTRL register across suspend/resume pinctrl: sh-pfc: r8a77990: Move CANFD pin groups and functions pinctrl: sh-pfc: r8a77990: Rename IOCTRLx registers pinctrl: sh-pfc: r8a7796: Move CANFD pin groups and functions pinctrl: sh-pfc: r8a7796: Deduplicate VIN5 pin definitions pinctrl: sh-pfc: r8a7796: Add I2C{0,3,5} pins, groups and functions pinctrl: sh-pfc: r8a7796: Fix VIN versioned groups pinctrl: sh-pfc: Validate pin tables at runtime pinctrl: sh-pfc: Add check for empty pinmux groups/functions pinctrl: sh-pfc: Mark run-time debug code __init pinctrl: sh-pfc: Correct printk level of group reference warning pinctrl: sh-pfc: Add new non-GPIO helper macros pinctrl: sh-pfc: Add SH_PFC_PIN_CFG_PULL_UP_DOWN shorthand pinctrl: sh-pfc: Rename 2-parameter CPU_ALL_PORT() variant pinctrl: sh-pfc: Improve PINMUX_IPSR_PHYS() documentation pinctrl: sh-pfc: Validate enum IDs for regs with variable-width fields pinctrl: sh-pfc: Validate enum IDs for regs with fixed-width fields pinctrl: sh-pfc: Absorb enum IDs in PINMUX_DATA_REG() macro pinctrl: sh-pfc: Absorb enum IDs in PINMUX_CFG_REG_VAR() macro pinctrl: sh-pfc: Absorb enum IDs in PINMUX_CFG_REG() macro pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length pinctrl: sh-pfc: Validate pins/marks in pin groups at build time pinctrl: sh-pfc: Add physical pin multiplexing helper macros pinctrl: sh-pfc: Validate pinmux tables at runtime when debugging pinctrl: sh-pfc: Print actual field width for variable-width fields CIP: Bump version suffix to -cip9 after merge from stable staging: m57621-mmc: delete driver from the tree. CIP: Bump version suffix to -cip8 after merge from stable Update to run all CIP arm, arm64 and x86 configs Update CI to use the latest linux-cip-ci containers CIP: Bump version suffix to -cip7 after merge from stable arm64: dts: renesas: r8a774c0: sort subnodes of the soc node arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2 arm64: dts: renesas: r8a774c0-cat874: Add RWDT support arm64: dts: renesas: r8a774c0-cat874: Add LEDs support arm64: dts: renesas: r8a774c0-cat874: add RTC support arm64: defconfig: enable RX-8581 config option rtc: rx8581: Add support for Epson rx8571 RTC dt-bindings: rtc: add rx8571 compatible rtc: nvmem: remove nvmem from struct rtc_device rtc: nvmem: use devm_nvmem_register() arm64: dts: renesas: cat874: Add USB-HOST support phy: renesas: rcar-gen3-usb2: enable/disable independent irqs phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg() phy: rcar-gen3-usb2: Add support for r8a77470 phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure phy: renesas: rcar-gen3-usb2: add is_otg_channel to use "role" sysfs phy: renesas: rcar-gen3-usb2: change a condition "dr_mode" phy: renesas: rcar-gen3-usb2: add conditions for uses_otg_pins == false phy: renesas: rcar-gen3-usb2: unify OBINTEN handling phy: renesas: rcar-gen3-usb2: Check a property to use otg pins phy: renesas: rcar-gen3-usb2: Rename has_otg_pins to uses_otg_pins phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs arm64: dts: renesas: cat875: Add CAN support arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes arm64: dts: renesas: r8a774c0: Add CAN nodes arm64: dts: renesas: r8a774c0: Fix cpu nodes style arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK clk: renesas: rcar-gen3: Add spinlock clk: renesas: rcar-gen3: Factor out cpg_reg_modify() clk: renesas: r8a774a1: Add missing CANFD clock clk: renesas: Remove usage of CLK_IS_BASIC clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a774a1: Add CPEX clock CIP: Bump version suffix to -cip6 after merge from stable Add gitlab-ci.yaml CIP: Bump version suffix to -cip5 after merge from stable CIP: Bump version suffix to -cip4 after merge from stable CIP: Bump version suffix to -cip3 after merge from stable dt-bindings: Add vendor prefix for Silicon Linux. CIP: Bump version suffix to -cip2 after Renesas patches arm64: defconfig: Enable R-Car thermal driver arm64: dts: renesas: r8a774c0: Add thermal support dt-bindings: thermal: rcar-thermal: add R8A774C0 support thermal: rcar_thermal: add R8A774C0 support arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU arm64: dts: renesas: r8a774c0: Add PWM support dt-bindings: pwm: rcar: Add r8a774c0 support dt-bindings: pwm: rcar: Add r8a774a1 support arm64: dts: renesas: r8a774c0: Add audio support ASoC: rsnd: Add r8a774c0 support ASoC: rsnd: Add r8a774a1 support arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes media: dt-bindings: rcar-csi2: Add r8a774c0 media: dt-bindings: rcar-vin: Add R8A774C0 support media: rcar-csi2: Add support for RZ/G2E media: rcar-csi2: Fix PHTW table values for E3/V3M media: rcar-csi2: Handle per-SoC number of channels media: rcar: rcar-csi2: Update V3M/E3 PHTW tables media: rcar-csi2: Add R8A77990 support media: rcar-vin: Add support for RZ/G2E media: rcar-vin: Add support for R-Car R8A77990 arm64: dts: renesas: r8a774c0: Add IPMMU device nodes dt-bindings: iommu: ipmmu-vmsa: Add r8a774c0 support dt-bindings: iommu: ipmmu-vmsa: Add r8a774a1 support iommu/ipmmu-vmsa: Hook up r8a774c0 DT matching code iommu/ipmmu-vmsa: Modify ipmmu_slave_whitelist() to check SoC revisions iommu/ipmmu-vmsa: Hook up R8A774A1 DT maching code arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes usb: gadget: udc: renesas_usb3: Add bindings for r8a774c0 usb: gadget: udc: renesas_usb3: Add r8a774a1 support usb: gadget: udc: renesas_usb3: add support for r8a774c0 usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device usb: gadget: udc: renesas_usb3: add support for r8a77990 arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 dt-bindings: usb: renesas_usbhs: Add r8a774c0 support dt-bindings: usb: renesas_usbhs: add clock-names property Revert "usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel" usb: renesas_usbhs: Add multiple clocks management usb: renesas_usbhs: Add reset_control usb: renesas_usbhs: add support for RZ/G2E arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes dt-bindings: rcar-gen3-phy-usb2: Add r8a774c0 support dt-bindings: rcar-gen3-phy-usb2: Add r8a774a1 support arm64: renesas: Enable GPIOLIB to allow GPIO driver selection arm64: enable CMT/TMU support for Renesas SoC clocksource/drivers/sh_tmu: Convert to SPDX identifiers arm64: dts: renesas: r8a774c0: Add TMU device nodes dt-bindings: timer: renesas: tmu: Document r8a774c0 bindings clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Add TMU clock clk: renesas: r8a774c0: Correct parent clock of DU clk: renesas: r8a774c0: Add missing CANFD clock arm64: dts: renesas: r8a774c0: Add CMT device nodes dt-bindings: timer: renesas, cmt: Document r8a774c0 CMT support dt-bindings: timer: renesas, cmt: Document r8a774a1 CMT support clocksource/drivers/sh_cmt: Add R-Car gen3 support dt-bindings: timer: renesas: cmt: document R-Car gen3 support clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines clocksource/drivers/sh_cmt: Fixup for 64-bit machines clocksource/drivers/sh_cmt: Convert to SPDX identifiers pinctrl: sh-pfc: r8a77990: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77990: Add TMU pins, groups and functions pinctrl: sh-pfc: r8a77990: GP6_9 does not have pull-down capability pinctrl: sh-pfc: r8a77990: Fix MOD_SEL bit numbering pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit2 when using RX2, TX2 and SCK2 pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit3 when using TX0 pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 SEL_I2C1 field width pinctrl: sh-pfc: r8a77990: Fix IOCTRL reg state after s2ram on R-Car E3 pinctrl: sh-pfc: r8a77990: Add CAN FD pins, groups and functions pinctrl: sh-pfc: r8a77990: Add CAN pins, groups and functions arm64: dts: renesas: cat875: Enable PCIe support arm64: dts: renesas: r8a774c0-cat874: Add pciec0 support arm64: dts: renesas: r8a774c0: Add PCIe device node dt-bindings: PCI: rcar: Add device tree support for r8a774c0 arm64: dts: renesas: r8a774c0: Add MSIOF nodes spi: sh-msiof: Add r8a774c0 support spi: sh-msiof: Add r8a774a1 support arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS support dt-bindings: i2c: rcar: Add r8a774c0 support i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E) i2c: sh_mobile: add support for r8a77990 (R-Car E3) dt-bindings: i2c: sh_mobile: Add r8a774c0 support i2c: sh_mobile: document support for r8a77990 (R-Car E3) pinctrl: sh-pfc: r8a77990: Add HSCIF pins, groups, and functions pinctrl: sh-pfc: r8a77990: Add VIN[4|5] groups/functions pinctrl: sh-pfc: Add optional arg to VIN_DATA_PIN_GROUP pinctrl: sh-pfc: Reduce kernel size for narrow VIN channels arm64: dts: renesas: r8a774c0: Add watchdog support dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support arm64: dts: renesas: cat875: Add ethernet support arm64: dts: renesas: r8a774c0: Add Ethernet AVB node dt-bindings: net: ravb: Add support for r8a774c0 SoC arm64: dts: renesas: r8a774c0-cat874: Add uSD support arm64: dts: renesas: r8a774c0: Add SDHI nodes mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0 dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support dt-bindings: mmc: renesas_sdhi: Add r8a77470 support mmc: renesas_sdhi_internal_dmac: Whitelist r8a774a1 mmc: renesas_sdhi: Add r8a774a1 support pinctrl: sh-pfc: r8a77990: Add voltage switch operations for SDHI pinctrl: sh-pfc: r8a77990: Add SDHI pins, groups and functions pinctrl: sh-pfc: r8a77990: Add Audio SSI pins, groups and functions pinctrl: sh-pfc: r8a77990: Add Audio clock pins, groups and functions arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2 arm64: dts: renesas: r8a774c0: Add GPIO device nodes dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support dt-bindings: gpio: rcar: Add r8a774a1 (RZ/G2M) support arm64: dts: renesas: r8a774c0: Add PFC support arm64: dts: renesas: r8a774c0: Add INTC-EX device node pinctrl: sh-pfc: r8a77990: Add INTC-EX pins, groups and function pinctrl: sh-pfc: rcar: Rename automotive-only arrays to automotive arm64: dts: renesas: r8a774c0: Add secondary CA53 CPU core clk: renesas: cpg-mssr: Add r8a774c0 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0 clk: renesas: cpg-mssr: Add r8a774a1 support clk: renesas: rcar-gen3: Add support for mode pin clock selection clk: renesas: rcar-gen3: Add support for RCKSEL clock selection clk: renesas: cpg-mssr: Add support for fixed rate clocks clk: renesas: rcar-gen3: Add support for OSC EXTAL predivider clk: renesas: Add r8a774a1 CPG Core Clock Definitions clk: renesas: Add r8a774c0 CPG Core Clock Definitions arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes dt-bindings: serial: sh-sci: Document r8a774c0 bindings dt-bindings: serial: sh-sci: Document r8a774a1 bindings arm64: dts: renesas: r8a774c0: Add SYS-DMAC controller nodes dmaengine: rcar-dmac: Document R8A774C0 bindings dmaengine: rcar-dmac: Document R8A774A1 bindings arm64: dts: renesas: Add Si-Linux EK874 board support arm64: dts: renesas: Add Si-Linux CAT874 board support arm64: dts: renesas: Initial device tree for r8a774c0 dt-bindings: arm: Add si-linux cat87[45] boards ARM: dts: socfpga: Rename socfpga_cyclone5_de0_{sockit, nano_soc} dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support soc: renesas: rcar-rst: Add support for RZ/G2E dt-bindings: reset: rcar-rst: Document r8a774c0 rst soc: renesas: rcar-rst: Add support for RZ/G2M soc: renesas: rcar-sysc: Add r8a774c0 support dt-bindings: power: rcar-sysc: Document r8a774c0 sysc soc: renesas: rcar-sysc: Add r8a774a1 support dt-bindings: power: Add r8a774c0 SYSC power domain definitions dt-bindings: power: Add r8a774a1 SYSC power domain definitions arm64: defconfig: enable R8A774C0 SoC arm64: defconfig: enable R8A774A1 SoC arm64: Add Renesas R8A774C0 support arm64: Add Renesas R8A774A1 support soc: renesas: Identify RZ/G2E soc: renesas: Identify RZ/G2M dt-bindings: arm: Fix RZ/G2E part number dt-bindings: arm: Document RZ/G2E SoC DT bindings dt-bindings: arm: Document RZ/G2M SoC DT bindings pinctrl: sh-pfc: r8a77990: Add R8A774C0 PFC support pinctrl: sh-pfc: r8a77990: Add MSIOF pins, groups and functions pinctrl: sh-pfc: r8a77990: Add DU pins, groups and function pinctrl: sh-pfc: r8a77990: Add PWM pins, groups and functions dt-bindings: pinctrl: sh-pfc: Document r8a774c0 PFC support pinctrl: sh-pfc: r8a7796: Add R8A774A1 PFC support dt-bindings: pinctrl: sh-pfc: Document r8a774a1 PFC support CIP: Add a number to the version suffix Conflicts: Documentation/devicetree/bindings/i2c/i2c-rcar.txt Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt Documentation/devicetree/bindings/usb/renesas_usb3.txt Documentation/devicetree/bindings/usb/renesas_usbhs.txt Documentation/devicetree/bindings/watchdog/renesas-wdt.txt arch/arm64/boot/dts/vendor/bindings/display/panel/advantech,idk-1110wr.txt arch/arm64/boot/dts/vendor/bindings/display/panel/advantech,idk-2121wr.yaml arch/arm64/boot/dts/vendor/bindings/i2c/i2c-rcar.txt arch/arm64/boot/dts/vendor/bindings/i2c/i2c-sh_mobile.txt arch/arm64/boot/dts/vendor/bindings/i2c/renesas,i2c.txt arch/arm64/boot/dts/vendor/bindings/i2c/renesas,iic.txt arch/arm64/boot/dts/vendor/bindings/media/i2c/imx219.yaml arch/arm64/boot/dts/vendor/bindings/memory-controllers/renesas,rpc-if.yaml arch/arm64/boot/dts/vendor/bindings/pci/rcar-pci-ep.yaml arch/arm64/boot/dts/vendor/bindings/usb/renesas,usb3-peri.txt arch/arm64/boot/dts/vendor/bindings/usb/renesas,usbhs.txt arch/arm64/boot/dts/vendor/bindings/usb/renesas_usb3.txt arch/arm64/boot/dts/vendor/bindings/usb/renesas_usbhs.txt arch/arm64/boot/dts/vendor/bindings/usb/ti,hd3ss3220.txt arch/arm64/boot/dts/vendor/bindings/watchdog/renesas,wdt.txt arch/arm64/boot/dts/vendor/bindings/watchdog/renesas-wdt.txt drivers/clk/qcom/clk-alpha-pll.c drivers/hid/hid-ids.h drivers/irqchip/irq-gic-v3.c drivers/media/platform/qcom/venus/hfi_parser.c drivers/mmc/host/sdhci.h drivers/platform/x86/intel_cht_int33fe.c drivers/slimbus/messaging.c drivers/usb/dwc3/core.c drivers/usb/dwc3/gadget.c drivers/usb/gadget/function/f_fs.c drivers/usb/typec/mux.c fs/ext4/dir.c kernel/time/posix-timers.c mm/oom_kill.c Change-Id: I6ccf7ce22c6636030db6245952c67bfa54aef5a4	2025-09-02 08:35:50 +00:00
Mukesh Ojha	e14434d31f	leds: class: Protect brightness_show() with led_cdev->led_access mutex ... [ Upstream commit 4ca7cd938725a4050dcd62ae9472e931d603118d ] There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Anish Kumar <yesanishhere@gmail.com> Link: https://lore.kernel.org/r/20241103160527.82487-1-quic_mojha@quicinc.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli@kernel.org>	2025-02-07 03:34:23 +01:00
Ram Chandrasekar	29cca490d4	leds: led-class: Retain the latest user brightness request ... Retain the latest user brightness request. This ensures that when a max brightness limit is altered, the last brightness request is taken into account, when restoring the current brightness. Change-Id: I6461e06f64abe336cabc27a3992d734f1fb745c6 Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>	2021-06-14 22:24:13 +05:30
Subbaraman Narayanamurthy	b827b53c3c	leds: add flag to keep trigger always ... Commit 0013b23d66 ("leds: disable triggers on brightness set") removes the trigger on a LED class device when brightness is set to 0. However, there are some LED class devices which needs the trigger not to be removed. In an use case like camera flash, camera flash driver passes in a trigger device to LED class driver. If the trigger is removed when the brightness is set to 0, this will affect the clients using those triggers. Hence add a flag to always keep the trigger even when brightness is set to 0. Change-Id: Icec1380b297bc87058ea5024ef690ee3c1bed9e3 Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>	2018-11-01 15:36:36 -07:00
Uwe Kleine-König	9acc560de2	leds: triggers: new function led_set_trigger_data() ... This is the natural counter part to the already existing led_get_trigger_data(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2018-07-05 23:21:11 +02:00
Uwe Kleine-König	a0b7507683	leds: triggers: define module_led_trigger helper ... This helps to simplify modules that provide a simple led_trigger. It's inspired by module_platform_driver, module_i2c_driver et al. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2018-07-05 23:21:11 +02:00
Uwe Kleine-König	a7e7a31563	leds: triggers: add device attribute support ... As many triggers use device attributes, add support for these in led_trigger_set which allows simplifying the drivers accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2018-07-05 23:21:10 +02:00
Uwe Kleine-König	2282e125a4	leds: triggers: let struct led_trigger::activate() return an error code ... Given that activating a trigger can fail, let the callback return an indication. This prevents to have a trigger active according to the "trigger" sysfs attribute but not functional. All users are changed accordingly to return 0 for now. There is no intended change in behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2018-07-05 23:21:10 +02:00
Linus Walleij	d1ed7c5586	leds: Extends disk trigger for reads and writes ... This adds two new disk triggers for triggering on reads and writes respectively, named "disk-read" and "disk-write". The use case comes from working on the D-Link DNS-313 NAS box. This features an RGB LED for disk activity. with these two triggers I can couple the green LED to read activity and the red LED to write activity, which gives the appropriate user feedback about what is happening on the disk. When tested it gave exactly the feedback desired. The in-kernel interface is simply changed to pass a bool indicating if the activity is write activity and update each trigger (and the composite "disk-activity" trigger) depending on what is passed in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2018-03-11 20:01:55 +01:00
David Lin	55edd1dad9	leds: Replace flags bit shift with BIT() macros ... This is for readability as well as to avoid checkpatch warnings when adding new bit flag information in the future. Signed-off-by: David Lin <dtwlin@google.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2017-10-06 21:31:03 +02:00
Andrew Jeffery	f5808ac158	leds: gpio: Allow LED to retain state at shutdown ... In some systems, such as Baseboard Management Controllers (BMCs), we want to retain the state of LEDs across a reboot of the BMC (whilst the host remains up). Implement support for the retain-state-shutdown devicetree property in leds-gpio. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2017-08-29 21:10:40 +02:00
Rafał Miłecki	442c609830	leds: core: add OF variants of LED registering functions ... These new functions allow passing an additional device_node argument that will be internally set for created LED device. Thanks to this LED core code and triggers will be able to access DT node for reading extra info. The easiest solution for achieving this was reworking old functions to more generic ones & adding simple defines for API compatibility. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2017-03-08 21:10:01 +01:00
Hans de Goede	0cb8eb30d4	leds: class: Add new optional brightness_hw_changed attribute ... Some LEDs may have their brightness level changed autonomously (outside of kernel control) by hardware / firmware. This commit adds support for an optional brightness_hw_changed attribute to signal such changes to userspace (if a driver can detect them): What: /sys/class/leds/<led>/brightness_hw_changed Date: January 2017 KernelVersion: 4.11 Description: Last hardware set brightness level for this LED. Some LEDs may be changed autonomously by hardware/firmware. Only LEDs where this happens and the driver can detect this, will have this file. This file supports poll() to detect when the hardware changes the brightness. Reading this file will return the last brightness level set by the hardware, this may be different from the current brightness. Drivers which want to support this, simply add LED_BRIGHT_HW_CHANGED to their flags field and call led_classdev_notify_brightness_hw_changed() with the hardware set brightness when they detect a hardware / firmware triggered brightness change. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2017-01-29 19:59:42 +01:00
Andi Shyti	4e552c8cb5	leds: add LED_ON brightness as boolean value ... Some devices do not handle the led brightness or simply don't care about it. Conceptually said devices want to just switch on or off the led. It is useless in this case to have a 255 range of brightness, while just having an LED_ON and LED_OFF improves the boolean meaning of the led status. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>	2017-01-05 23:01:05 +01:00
Hans de Goede	eb1610b4c2	led: core: Fix blink_brightness setting race ... All 3 of led_timer_func, led_set_brightness and led_set_software_blink set blink_brightness. If led_timer_func or led_set_software_blink race with led_set_brightness they may end up overwriting the new blink_brightness. The new atomic work_flags does not protect against this as it just protects the flags and not blink_brightness. This commit introduces a new new_blink_brightness value which gets set by led_set_brightness and read by led_timer_func on LED on, fixing this. Dealing with the new brightness at LED on time, makes the new brightness apply sooner, which also fixes a led_set_brightness which happens while a oneshot blink which ends in LED on is running not getting applied. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-11-22 12:07:05 +01:00
Hans de Goede	a9c6ce57ec	led: core: Use atomic bit-field for the blink-flags ... All the LED_BLINK* flags are accessed read-modify-write from e.g. led_set_brightness and led_blink_set_oneshot while both set_brightness_work and the blink_timer may be running. If these race then the modify step done by one of them may be lost, switch the LED_BLINK* flags to a new atomic work_flags bit-field to avoid this race. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-11-22 12:07:05 +01:00
Heiner Kallweit	68620e594c	leds: gpio: introduce gpio_blink_set_t ... Introduce a typedef gpio_blink_set_t to improve readability of the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-09-15 16:49:39 +02:00
Andrew F. Davis	fca23e47df	leds: Add no-op gpio_led_register_device when LED subsystem is disabled ... Some systems use 'gpio_led_register_device' to make an in-memory copy of their LED device table so the original can be removed as .init.rodata. When the LED subsystem is not enabled source in the led directory is not built and so this function may be undefined. Fix this here. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-06-27 08:58:42 +02:00
Stephan Linz	eb25cb9956	leds: convert IDE trigger to common disk trigger ... This patch converts the IDE specific LED trigger to a generic disk activity LED trigger. The libata core is now a trigger source just like before the IDE disk driver. It's merely a replacement of the string ide by disk. The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is widely used by any ibook/powerbook owners with great satisfaction. Likewise, it is very often used successfully on different ARM platforms. Unlike the original patch, the existing 'ide-disk' trigger is still available for backward compatibility. That reduce the amount of patches in affected device trees out of the mainline kernel. For further development, the new name 'disk-activity' should be used. Cc: Joseph Jezak <josejx@gentoo.org> Cc: Jörg Sommer <joerg@alea.gnuu.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-06-20 09:57:56 +02:00
Tony Makkiel	7cfe749fad	leds: core: Fix brightness setting upon hardware blinking enabled ... Commit 76931edd54 ("leds: fix brightness changing when software blinking is active") changed the semantics of led_set_brightness() which according to the documentation should disable blinking upon any brightness setting. Moreover it made it different for soft blink case, where it was possible to change blink brightness, and for hardware blink case, where setting any brightness greater than 0 was ignored. While the change itself is against the documentation claims, it was driven also by the fact that timer trigger remained active after turning blinking off. Fixing that would have required major refactoring in the led-core, led-class, and led-triggers because of cyclic dependencies. Finally, it has been decided that allowing for brightness change during blinking is beneficial as it can be accomplished without disturbing blink rhythm. The change in brightness setting semantics will not affect existing LED class drivers that implement blink_set op thanks to the LED_BLINK_SW flag introduced by this patch. The flag state will be from now on checked in led_set_brightness() which will allow to distinguish between software and hardware blink mode. In the latter case the control will be passed directly to the drivers which apply their semantics on brightness set, which is disable the blinking in case of most such drivers. New drivers will apply new semantics and just change the brightness while hardware blinking is on, if possible. The issue was smuggled by subsequent LED core improvements, which modified the code that originally introduced the problem. Fixes: f1e80c0741 ("leds: core: Add two new LED_BLINK_ flags") Signed-off-by: Tony Makkiel <tony.makkiel@daqri.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-06-08 11:47:06 +02:00
Ezequiel Garcia	80d6737b27	leds: gpio: Support the "panic-indicator" firmware property ... Calling a GPIO LEDs is quite likely to work even if the kernel has paniced, so they are ideal to blink in this situation. This commit adds support for the new "panic-indicator" firmware property, allowing to mark a given LED to blink on a kernel panic. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-05-06 10:26:07 +02:00
Ezequiel Garcia	ba93cdce5b	leds: triggers: Allow to switch the trigger to "panic" on a kernel panic ... This commit adds a new led_cdev flag LED_PANIC_INDICATOR, which allows to mark a specific LED to be switched to the "panic" trigger, on a kernel panic. This is useful to allow the user to assign a regular trigger to a given LED, and still blink that LED on a kernel panic. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-05-06 10:22:09 +02:00
Ezequiel Garcia	4b721174c7	leds: trigger: Introduce a MTD (NAND/NOR) trigger ... This commit introduces a MTD trigger for flash (NAND/NOR) device activity. The implementation is copied from IDE disk. This trigger deprecates the "nand-disk" LED trigger, but for backwards compatibility, we still keep the "nand-disk" trigger around. The motivation for deprecating the "nand-disk" LED trigger is that it only works for NAND drivers, whereas the "mtd" LED trigger is more generic (in fact, "nand-disk" currently only works for certain NAND drivers). Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-04-13 10:23:14 +02:00
Heiner Kallweit	d84d80f38f	leds: core: avoid error message when a USB LED device is unplugged ... When a USB LED device is unplugged the remove call chain calls led_classdev_unregister which tries to switch the LED off. As the device has been removed already this results in a ENODEV error message in dmesg. Avoid this error message by ignoring ENODEV in calls from led_classdev_unregister if the LED device is flagged as pluggable. Therefore a new flag LED_HW_PLUGGABLE was introduced which should be set by all LED drivers handling pluggable LED devices (mainly USB LED devices). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-03-14 09:22:20 +01:00
Heiner Kallweit	70b2563b35	leds: core: fix misleading comment after workqueue removal from drivers ... Now that workqueues have been removed from individual drivers and were replaced with a core-internal workqueue we shouldn't encourage people to add new workqueues to drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-03-14 09:22:20 +01:00
Heiner Kallweit	9534cc31dd	leds: core: add managed version of led_trigger_register ... Complementing devm_led_classdev_register add a managed version of led_trigger_register. I omit a managed version of led_classdev_unregister as the equivalent devm_led_classdev_unregister isn't used in the kernel as of today. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>	2016-01-04 09:57:40 +01:00
Jacek Anaszewski	13ae79bbe4	leds: core: Drivers shouldn't enforce SYNC/ASYNC brightness setting ... This patch removes SET_BRIGHTNESS_ASYNC and SET_BRIGHTNESS_SYNC flags. led_set_brightness() now calls led_set_brightness_nosleep() instead of choosing between sync and async op basing on the flags defined by the driver. From now on, if a user wants to make sure that brightness will be set synchronously, they have to use led_set_brightness_sync() API. It is now being made publicly available since it has become apparent that it is a caller who should decide whether brightness is to be set in a synchronous or an asynchronous way. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>	2016-01-04 09:57:31 +01:00
Jacek Anaszewski	1afcadfcd1	leds: core: Use set_brightness_work for the blocking op ... This patch makes LED core capable of setting brightness for drivers that implement brightness_set_blocking op. It removes from LED class drivers responsibility for using work queues on their own. In order to achieve this set_brightness_delayed callback is being modified to directly call one of available ops for brightness setting. led_set_brightness_async() function didn't set brightness in an asynchronous way in all cases. It was mistakenly assuming that all LED subsystem drivers used work queue in their brightness_set op, whereas only half of them did that. Since it has no users now, it is being removed. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>	2016-01-04 09:57:30 +01:00
Jacek Anaszewski	437a4240f2	leds: Rename brightness_set_sync op to brightness_set_blocking ... The initial purpose of brightness_set_sync op, introduced along with the LED flash class extension, was to add a means for setting torch LED brightness as soon as possible, which couldn't have been guaranteed by brightness_set op. This patch renames the op to brightness_set_blocking, which describes its purpose in a more generic way. It is beneficial in view of the prospective changes in the LED core, aiming at removing the need for using work queues in LED class drivers that can sleep or use delays while setting brightness. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>	2016-01-04 09:57:30 +01:00
Jacek Anaszewski	f1e80c0741	leds: core: Add two new LED_BLINK_ flags ... This patch adds LED_BLINK_BRIGHTNESS_CHANGE flag to indicate that blink brightness has changed, and LED_BLINK_DISABLE flag to indicate that blinking deactivation has been requested. In order to use the flags led_timer_function and set_brightness_delayed callbacks as well as led_set_brightness() function are being modified. The main goal of these modifications is to prepare set_brightness_work for extension of the scope of its responsibilities. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>	2016-01-04 09:57:30 +01:00
Michael Grzeschik	8890624a4e	arcnet: com20020-pci: add led trigger support ... The EAE PLX-PCI card has special leds on the the main io pci resource bar. This patch adds support to trigger the conflict and data leds with the packages. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>	2015-10-26 09:10:56 +01:00
Jacek Anaszewski	20f56758b0	leds: unify the location of led-trigger API ... Part of led-trigger API was in the private drivers/leds/leds.h header. Move it to the include/linux/leds.h header to unify the API location and announce it as public. It has been already exported from led-triggers.c with EXPORT_SYMBOL_GPL macro. The no-op definitions are changed from macros to inline to match the style of the surrounding code. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2015-05-04 11:05:55 -07:00
Jacek Anaszewski	94fdec768d	leds: flash: Remove synchronized flash strobe feature ... Synchronized flash strobe feature has been considered not fitting for LED subsystem sysfs interface and thus is being removed. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2015-03-09 17:16:23 -07:00
Bjorn Andersson	ca1bb4ee4c	leds: Introduce devres helper for led_classdev_register ... (cooloney@gmail.com: add _unregister function into the document) Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2015-03-09 13:43:41 -07:00
Jacek Anaszewski	7aea8389a7	leds: Add LED Flash class extension to the LED subsystem ... Some LED devices support two operation modes - torch and flash. This patch provides support for flash LED devices in the LED subsystem by introducing new sysfs attributes and kernel internal interface. The attributes being introduced are: flash_brightness, flash_strobe, flash_timeout, max_flash_timeout, max_flash_brightness, flash_fault, flash_sync_strobe and available_sync_leds. All the flash related features are placed in a separate module. The modifications aim to be compatible with V4L2 framework requirements related to the flash devices management. The design assumes that V4L2 sub-device can take of the LED class device control and communicate with it through the kernel internal interface. When V4L2 Flash sub-device file is opened, the LED class device sysfs interface is made unavailable. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2015-01-26 14:59:08 -08:00
Linus Torvalds	2dbfca5a18	Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds ... Pull LED subsystem update from Bryan Wu: "We got some cleanup and driver for LP8860 as well as some patches for LED Flash Class" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: lp8860: Fix module dependency leds: lp8860: Introduce TI lp8860 4 channel LED driver leds: Add support for setting brightness in a synchronous way leds: implement sysfs interface locking mechanism leds: syscon: handle multiple syscon instances leds: delete copy/paste mistake leds: regulator: Convert to devm_regulator_get_exclusive	2014-12-15 18:28:25 -08:00
Jacek Anaszewski	4d71a4a12b	leds: Add support for setting brightness in a synchronous way ... There are use cases when setting a LED brightness has to have immediate effect (e.g. setting a torch LED brightness). This patch extends LED subsystem to support such operations. The LED subsystem internal API __led_set_brightness is changed to led_set_brightness_async and new led_set_brightness_sync API is added. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2014-11-14 14:29:35 -08:00
Jacek Anaszewski	acd899e4f3	leds: implement sysfs interface locking mechanism ... Add a mechanism for locking LED subsystem sysfs interface. This patch prepares ground for addition of LED Flash Class extension, whose API will be integrated with V4L2 Flash API. Such a fusion enforces introducing a locking scheme, which will secure consistent access to the LED Flash Class device. The mechanism being introduced allows for disabling LED subsystem sysfs interface by calling led_sysfs_disable function and enabling it by calling led_sysfs_enable. The functions alter the LED_SYSFS_DISABLE flag state and must be called under mutex lock. The state of the lock is checked with use of led_sysfs_is_disabled function. Such a design allows for providing immediate feedback to the user space on whether the LED Flash Class device is available or is under V4L2 Flash sub-device control. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2014-11-14 14:29:35 -08:00
Mika Westerberg	c673a2b400	leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors ... Commit 21f2aae91e902aad ("leds: leds-gpio: Add support for GPIO descriptors") already converted most of the driver to use GPIO descriptors. What is still missing is the platform specific hook gpio_blink_set() and board files which pass legacy GPIO numbers to this driver in platform data. In this patch we handle the former and convert gpio_blink_set() to take GPIO descriptor instead. In order to do this we convert the existing four users to accept GPIO descriptor and translate it to legacy GPIO number in the platform code. This effectively "pushes" legacy GPIO number usage from the driver to platforms. Also add comment to the remaining block describing that it is legacy code path and we are getting rid of it eventually. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2014-11-04 21:58:25 +01:00
Mika Westerberg	5c51277a9a	leds: leds-gpio: Add support for GPIO descriptors ... GPIO descriptors are the preferred way over legacy GPIO numbers nowadays. Convert the driver to use GPIO descriptors internally but still allow passing legacy GPIO numbers from platform data to support existing platforms. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Bryan Wu <cooloney@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	2014-11-04 21:58:22 +01:00
Jacek Anaszewski	3ef7de5304	leds: Improve and export led_update_brightness ... led_update_brightness helper function used to be exploited only locally in the led-class.c module, where its result was being passed to the brightness_show sysfs callback. With the introduction of v4l2-flash subdevice the same functionality becomes required for reading current brightness from a LED device. This patch adds checking of return value of the brightness_get callback and moves the led_update_brightness() function to the LED subsystem public API. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2014-09-12 14:01:54 -07:00
Jacek Anaszewski	d8082827d8	leds: make brightness type consistent across whole subsystem ... Documentations states that brightness units type is enum led_brightness and this is the type used by the led API functions. Adjust the type of brightness variables in the struct led_classdev accordingly. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2014-09-11 16:55:25 -07:00
Jacek Anaszewski	047133066e	leds: Reorder include directives ... Reorder include directives so that they are arranged in alphabetical order. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2014-09-11 16:55:25 -07:00
Jiri Kosina	9067359faf	Revert "leds: convert blink timer to workqueue" ... This reverts commit 8b37e1bef5. It's broken as it changes led_blink_set() in a way that it can now sleep (while synchronously waiting for workqueue to be cancelled). That's a problem, because it's possible that this function gets called from atomic context (tpt_trig_timer() takes a readlock and thus disables preemption). This has been brought up 3 weeks ago already [1] but no proper fix has materialized, and I keep seeing the problem since 3.17-rc1. [1] https://lkml.org/lkml/2014/8/16/128 BUG: sleeping function called from invalid context at kernel/workqueue.c:2650 in_atomic(): 1, irqs_disabled(): 0, pid: 2335, name: wpa_supplicant 5 locks held by wpa_supplicant/2335: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff814c7c92>] rtnl_lock+0x12/0x20 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffffc06e649c>] cfg80211_mgd_wext_siwessid+0x5c/0x180 [cfg80211] #2: (&local->mtx){+.+.+.}, at: [<ffffffffc0817dea>] ieee80211_prep_connection+0x17a/0x9a0 [mac80211] #3: (&local->chanctx_mtx){+.+.+.}, at: [<ffffffffc08081ed>] ieee80211_vif_use_channel+0x5d/0x2a0 [mac80211] #4: (&trig->leddev_list_lock){.+.+..}, at: [<ffffffffc081e68c>] tpt_trig_timer+0xec/0x170 [mac80211] CPU: 0 PID: 2335 Comm: wpa_supplicant Not tainted 3.17.0-rc3 #1 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 ffff8800360b5a50 ffff8800751f76d8 ffffffff8159e97f ffff8800360b5a30 ffff8800751f76e8 ffffffff810739a5 ffff8800751f77b0 ffffffff8106862f ffffffff810685d0 0aa2209200000000 ffff880000000004 ffff8800361c59d0 Call Trace: [<ffffffff8159e97f>] dump_stack+0x4d/0x66 [<ffffffff810739a5>] __might_sleep+0xe5/0x120 [<ffffffff8106862f>] flush_work+0x5f/0x270 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffff810945ca>] ? mark_held_locks+0x6a/0x90 [<ffffffff81068a5f>] ? __cancel_work_timer+0x6f/0x100 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffffc081ecdd>] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211] [<ffffffffc07e4278>] __ieee80211_recalc_idle+0x98/0x140 [mac80211] [<ffffffffc07e59ce>] ieee80211_idle_off+0xe/0x10 [mac80211] [<ffffffffc0804e5b>] ieee80211_add_chanctx+0x3b/0x220 [mac80211] [<ffffffffc08062e4>] ieee80211_new_chanctx+0x44/0xf0 [mac80211] [<ffffffffc080838a>] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211] [<ffffffffc0817df8>] ieee80211_prep_connection+0x188/0x9a0 [mac80211] [<ffffffffc081c246>] ieee80211_mgd_auth+0x256/0x2e0 [mac80211] [<ffffffffc07eab33>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffc06cb006>] cfg80211_mlme_auth+0x106/0x270 [cfg80211] [<ffffffffc06ce085>] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211] [<ffffffffc06cf670>] cfg80211_connect+0x3f0/0x540 [cfg80211] [<ffffffffc06e6148>] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211] [<ffffffffc06e651e>] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211] [<ffffffffc06e36c0>] ? cfg80211_wext_giwessid+0x50/0x50 [cfg80211] [<ffffffffc06e36dd>] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211] [<ffffffff81584d0c>] ioctl_standard_iw_point+0x14c/0x3e0 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8158502a>] ioctl_standard_call+0x8a/0xd0 [<ffffffff81584fa0>] ? ioctl_standard_iw_point+0x3e0/0x3e0 [<ffffffff81584b76>] wireless_process_ioctl.constprop.10+0xb6/0x100 [<ffffffff8158521d>] wext_handle_ioctl+0x5d/0xb0 [<ffffffff814cfb29>] dev_ioctl+0x329/0x620 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8149c7f2>] sock_ioctl+0x142/0x2e0 [<ffffffff811b0140>] do_vfs_ioctl+0x300/0x520 [<ffffffff815a67fb>] ? sysret_check+0x1b/0x56 [<ffffffff810946ed>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff811b03e1>] SyS_ioctl+0x81/0xa0 [<ffffffff815a67d6>] system_call_fastpath+0x1a/0x1f wlan0: send auth to 00:0b:6b:3c:8c:e4 (try 1/3) wlan0: authenticated wlan0: associate with 00:0b:6b:3c:8c:e4 (try 1/3) wlan0: RX AssocResp from 00:0b:6b:3c:8c:e4 (capab=0x431 status=0 aid=2) wlan0: associated IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: NA wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by 00:0b:6b:3c:8c:e4 ================================= [ INFO: inconsistent lock state ] 3.17.0-rc3 #1 Not tainted --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ((&(&led_cdev->blink_work)->work)){+.?...}, at: [<ffffffff810685d0>] flush_work+0x0/0x270 {SOFTIRQ-ON-W} state was registered at: [<ffffffff81094dbe>] __lock_acquire+0x30e/0x1a30 [<ffffffff81096c81>] lock_acquire+0x91/0x110 [<ffffffff81068608>] flush_work+0x38/0x270 [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffffc081ecdd>] ieee80211_mod_tpt_led_trig+0x9d/0x160 [mac80211] [<ffffffffc07e4278>] __ieee80211_recalc_idle+0x98/0x140 [mac80211] [<ffffffffc07e59ce>] ieee80211_idle_off+0xe/0x10 [mac80211] [<ffffffffc0804e5b>] ieee80211_add_chanctx+0x3b/0x220 [mac80211] [<ffffffffc08062e4>] ieee80211_new_chanctx+0x44/0xf0 [mac80211] [<ffffffffc080838a>] ieee80211_vif_use_channel+0x1fa/0x2a0 [mac80211] [<ffffffffc0817df8>] ieee80211_prep_connection+0x188/0x9a0 [mac80211] [<ffffffffc081c246>] ieee80211_mgd_auth+0x256/0x2e0 [mac80211] [<ffffffffc07eab33>] ieee80211_auth+0x13/0x20 [mac80211] [<ffffffffc06cb006>] cfg80211_mlme_auth+0x106/0x270 [cfg80211] [<ffffffffc06ce085>] cfg80211_conn_do_work+0x155/0x3b0 [cfg80211] [<ffffffffc06cf670>] cfg80211_connect+0x3f0/0x540 [cfg80211] [<ffffffffc06e6148>] cfg80211_mgd_wext_connect+0x158/0x1f0 [cfg80211] [<ffffffffc06e651e>] cfg80211_mgd_wext_siwessid+0xde/0x180 [cfg80211] [<ffffffffc06e36dd>] cfg80211_wext_siwessid+0x1d/0x40 [cfg80211] [<ffffffff81584d0c>] ioctl_standard_iw_point+0x14c/0x3e0 [<ffffffff8158502a>] ioctl_standard_call+0x8a/0xd0 [<ffffffff81584b76>] wireless_process_ioctl.constprop.10+0xb6/0x100 [<ffffffff8158521d>] wext_handle_ioctl+0x5d/0xb0 [<ffffffff814cfb29>] dev_ioctl+0x329/0x620 [<ffffffff8149c7f2>] sock_ioctl+0x142/0x2e0 [<ffffffff811b0140>] do_vfs_ioctl+0x300/0x520 [<ffffffff811b03e1>] SyS_ioctl+0x81/0xa0 [<ffffffff815a67d6>] system_call_fastpath+0x1a/0x1f irq event stamp: 493416 hardirqs last enabled at (493416): [<ffffffff81068a5f>] __cancel_work_timer+0x6f/0x100 hardirqs last disabled at (493415): [<ffffffff81067e9f>] try_to_grab_pending+0x1f/0x160 softirqs last enabled at (493408): [<ffffffff81053ced>] _local_bh_enable+0x1d/0x50 softirqs last disabled at (493409): [<ffffffff81054c75>] irq_exit+0xa5/0xb0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((&(&led_cdev->blink_work)->work)); <Interrupt> lock((&(&led_cdev->blink_work)->work)); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: (((&tpt_trig->timer))){+.-...}, at: [<ffffffff810b4c50>] call_timer_fn+0x0/0x180 #1: (&trig->leddev_list_lock){.+.?..}, at: [<ffffffffc081e68c>] tpt_trig_timer+0xec/0x170 [mac80211] stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0-rc3 #1 Hardware name: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 ffffffff8246eb30 ffff88007c203b00 ffffffff8159e97f ffffffff81a194c0 ffff88007c203b50 ffffffff81599c29 0000000000000001 ffffffff00000001 ffff880000000000 0000000000000006 ffffffff81a194c0 ffffffff81093ad0 Call Trace: <IRQ> [<ffffffff8159e97f>] dump_stack+0x4d/0x66 [<ffffffff81599c29>] print_usage_bug+0x1f4/0x205 [<ffffffff81093ad0>] ? check_usage_backwards+0x140/0x140 [<ffffffff810944d3>] mark_lock+0x223/0x2b0 [<ffffffff81094d60>] __lock_acquire+0x2b0/0x1a30 [<ffffffff81096c81>] lock_acquire+0x91/0x110 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff81068608>] flush_work+0x38/0x270 [<ffffffff810685d0>] ? mod_delayed_work_on+0x80/0x80 [<ffffffff810945ca>] ? mark_held_locks+0x6a/0x90 [<ffffffff81068a5f>] ? __cancel_work_timer+0x6f/0x100 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff8109469d>] ? trace_hardirqs_on_caller+0xad/0x1c0 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff81068a6b>] __cancel_work_timer+0x7b/0x100 [<ffffffff81068b0e>] cancel_delayed_work_sync+0xe/0x10 [<ffffffff8147cf3b>] led_blink_set+0x1b/0x40 [<ffffffffc081e6b0>] tpt_trig_timer+0x110/0x170 [mac80211] [<ffffffff810b4cc5>] call_timer_fn+0x75/0x180 [<ffffffff810b4c50>] ? process_timeout+0x10/0x10 [<ffffffffc081e5a0>] ? __ieee80211_get_rx_led_name+0x10/0x10 [mac80211] [<ffffffff810b50ac>] run_timer_softirq+0x1fc/0x2f0 [<ffffffff81054805>] __do_softirq+0x115/0x2e0 [<ffffffff81054c75>] irq_exit+0xa5/0xb0 [<ffffffff810049b3>] do_IRQ+0x53/0xf0 [<ffffffff815a74af>] common_interrupt+0x6f/0x6f <EOI> [<ffffffff8147b56e>] ? cpuidle_enter_state+0x6e/0x180 [<ffffffff8147b732>] cpuidle_enter+0x12/0x20 [<ffffffff8108bba0>] cpu_startup_entry+0x330/0x360 [<ffffffff8158fb51>] rest_init+0xc1/0xd0 [<ffffffff8158fa90>] ? csum_partial_copy_generic+0x170/0x170 [<ffffffff81af3ff2>] start_kernel+0x44f/0x45a [<ffffffff81af399c>] ? set_init_arg+0x53/0x53 [<ffffffff81af35ad>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81af36a0>] x86_64_start_kernel+0xf1/0xf4 Cc: Vincent Donnefort <vdonnefort@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2014-09-02 10:02:13 -07:00
Vincent Donnefort	8b37e1bef5	leds: convert blink timer to workqueue ... This patch converts the blink timer from led-core to workqueue which is more suitable for this kind of non-priority operations. Moreover, timer may lead to errors when a LED setting function use a scheduling function such as pinctrl which is using mutex. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2014-07-03 12:02:14 -07:00
Johan Hovold	d0d480cce8	leds: add led-class attribute-group support ... Allow led-class devices to be created with optional attribute groups. This is needed in order to allow led drivers to create custom device attributes in a race-free manner. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2014-06-25 14:55:03 -07:00
Kim, Milo	48a1d032c9	leds: add camera LED triggers ... Some LED devices support flash/torch functionality through the LED subsystem. This patch enables direct LED trigger controls by the driver. Flash on/off and torch on/off can be done simply by other driver space. Two trigger APIs are added, ledtrig_flash_ctrl() and ledtrig_torch_ctrl(). Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2013-04-01 11:04:50 -07:00
Kim, Milo	39f7e08af3	leds: trigger: use inline functions instead of macros ... Macros are used in case that an inline function doesn't work. Otherwise, use an empty inline function. (a) Case of !CONFIG_LEDS_TRIGGERS Following macros are replaced with inline functions. led_trigger_register_simple() led_trigger_unregister_simple() led_trigger_event() To make inline types, the structure, 'led_trigger' should be defined. This structure has no member at all. (b) Case of !CONFIG_LEDS_TRIGGER_IDE_DISK ledtrig_ide_activity() macro is replaced with an inline function as well. (c) DEFINE_LED_TRIGGER() and DEFINE_LED_TRIGGER_GLOBAL() Struct 'led_trigger' is defined both cases, with CONFIG_LEDS_TRIGGERS and without CONFIG_LEDS_TRIGGERS. Those macros are moved out of CONFIG_LED_TRIGGERS because of no-dependency on CONFIG_LEDS_TRIGGERS. (d) Fix build errors in mmc-core driver After replacing macros with inline functions, following build errors occur. (condition: CONFIG_LEDS_TRIGGERS is not set) drivers/mmc/core/core.c: In function 'mmc_request_done': drivers/mmc/core/core.c:164:25: error: 'struct mmc_host' has no member named 'led' drivers/mmc/core/core.c: In function 'mmc_start_request': drivers/mmc/core/core.c:254:24: error: 'struct mmc_host' has no member named 'led' make[3]: *** [drivers/mmc/core/core.o] Error 1 The reason of these errors is non-existent member variable, 'led'. It is only valid when CONFIG_LEDS_TRIGGERS is set. But now, it can be used without this dependency. To fix build errors, member 'led' is always used without its config option in 'include/linux/mmc/host.h'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2013-04-01 11:04:50 -07:00
Jingoo Han	057407c732	led: Add dependency on CONFIG_LEDS_TRIGGERS to led_trigger_rename_static() ... This patch fixes build warnings when CONFIG_LEDS_TRIGGERS is disabled as below: include/linux/leds.h:158:18: warning: 'struct led_trigger' declared inside parameter list [enabled by default] include/linux/leds.h:158:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2012-11-26 14:28:51 -08:00
Fabio Baltieri	a8df7b1ab7	leds: add led_trigger_rename function ... Implements a "led_trigger_rename" function to rename a trigger with proper locking. This assumes that led name was originally allocated in non-constant storage. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Cc: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Bryan Wu <cooloney@gmail.com>	2012-11-26 14:28:50 -08:00