127 Commits

Author	SHA1	Message	Date
Michael Bestas	9aff51ad3a	Merge tag 'v4.19.325-cip123' of https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip into android13-4.19-kona ... version 4.19.325-cip123 * tag 'v4.19.325-cip123' of https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip: CIP: Bump version suffix to -cip123 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.296. emulex/benet: Fix build by return mismatch in be_cmd_unlock() net/sched: Abort __tc_modify_qdisc if parent class does not exist mtk-sd: Prevent memory corruption from DMA map failure mmc: mediatek: use data instead of mrq parameter from msdc_{un}prepare_data() scsi: qla4xxx: Fix missing DMA mapping error in qla4xxx_alloc_pdu() btrfs: don't abort filesystem when attempting to snapshot deleted subvolume VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notify net: ipv6: Discard next-hop MTU less than minimum link MTU Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY vt: add missing notification when switching back to text mode net: usb: qmi_wwan: add SIMCom 8230C composition atm: idt77252: Add missing `dma_map_error()` bnxt_en: Fix DCB ETS validation can: m_can: m_can_handle_lost_msg(): downgrade msg lost in rx message to debug level net: appletalk: Fix device refcount leak in atrtr_create() md/raid1: Fix stack memory use after return in raid1_reshape wifi: zd1211rw: Fix potential NULL pointer dereference in zd_mac_tx_to_dev() dma-buf: fix timeout handling in dma_resv_wait_timeout v2 Input: xpad - support Acer NGR 200 Controller Input: xpad - add VID for Turtle Beach controllers Input: xpad - add support for Amazon Game Controller netlink: Fix rmem check in netlink_broadcast_deliver(). netlink: make sure we allow at least one dump skb Revert "ACPI: battery: negate current when discharging" usb: gadget: u_serial: Fix race condition in TTY wakeup drm/sched: Increment job count before swapping tail spsc queue x86/mce: Make sure CMCI banks are cleared during shutdown on Intel x86/mce: Don't remove sysfs if thresholding sysfs init fails x86/mce/amd: Fix threshold limit reset rxrpc: Fix oops due to non-existence of prealloc backlog struct atm: clip: Fix NULL pointer dereference in vcc_sendmsg() atm: clip: Fix infinite recursive call of clip_push(). atm: clip: Fix memory leak of struct clip_vcc. atm: clip: Fix potential null-ptr-deref in to_atmarpd(). tipc: Fix use-after-free in tipc_conn_close(). netlink: Fix wraparounds of sk->sk_rmem_alloc. fix proc_sys_compare() handling of in-lookup dentries proc: Clear the pieces of proc_inode that proc_evict_inode cares about staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher() media: uvcvideo: Rollback non processed entities on error media: uvcvideo: Send control events for partial succeeds media: uvcvideo: Return the number of processed controls ACPI: PAD: fix crash in exit_round_robin() usb: typec: displayport: Fix potential deadlock Logitech C-270 even more broken rose: fix dangling neighbour pointers in rose_rt_device_down() net: rose: Fix fall-through warnings for Clang ethernet: atl1: Add missing DMA mapping error checks and count errors btrfs: use btrfs_record_snapshot_destroy() during rmdir btrfs: propagate last_unlink_trans earlier when doing a rmdir RDMA/mlx5: Fix CC counters query for MPV scsi: ufs: core: Fix spelling of a sysfs attribute name ACPICA: Refuse to evaluate a method if arguments are missing wifi: ath6kl: remove WARN on bad firmware input wifi: mac80211: drop invalid source address OCB frames powerpc: Fix struct termio related ioctl macros ata: pata_cs5536: fix build on 32-bit UML ALSA: sb: Force to disable DMAs once when DMA mode is changed net/sched: Always pass notifications when child class becomes empty nui: Fix dma_mapping_error() check enic: fix incorrect MTU comparison in enic_change_mtu() amd-xgbe: align CL37 AN sequence as per databook btrfs: fix missing error handling when searching for inode refs during log replay mtk-sd: Fix a pagefault in dma_unmap_sg() for not prepared data usb: typec: altmodes/displayport: do not index invalid pin_assignments Revert "mmc: sdhci: Disable SD card clock before changing parameters" mmc: sdhci: Add a helper function for dump register in dynamic debug mode vsock/vmci: Clear the vmci transport packet properly when initializing it arm64: Restrict pagetable teardown to avoid false warning drm/bridge: cdns-dsi: Fix connecting to next bridge drm/tegra: Assign plane type before registration HID: wacom: fix kobject reference count leak HID: wacom: fix memory leak on sysfs attribute creation failure HID: wacom: fix memory leak on kobject creation failure dm-raid: fix variable in journal device check Bluetooth: L2CAP: Fix L2CAP MTU negotiation atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister(). um: ubd: Add missing error check in start_io_thread() vsock/uapi: fix linux/vm_sockets.h userspace compilation errors wifi: mac80211: fix beacon interval calculation overflow ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() i2c: robotfuzz-osif: disable zero-length read messages i2c: tiny-usb: disable zero-length read messages RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction RDMA/core: Use refcount_t instead of atomic_t on refcount of iwcm_id_private media: vivid: Change the siize of the composing media: omap3isp: use sgtable-based scatterlist wrappers jfs: validate AG parameters in dbMount() to prevent crashes fs/jfs: consolidate sanity checking in dbMount VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF ovl: Check for NULL d_inode() in ovl_dentry_upper() ceph: fix possible integer overflow in ceph_zero_objects() ALSA: hda: Ignore unsol events for cards being shut down usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode usb: cdc-wdm: avoid setting WDM_READ for ZLP-s usb: Add checks for snprintf() calls in usb_alloc_dev() usb: potential integer overflow in usbg_make_tpg() iio: pressure: zpa2326: Use aligned_s64 for the timestamp md/md-bitmap: fix dm-raid max_write_behind setting dmaengine: xilinx_dma: Set dma_device directions mfd: max14577: Fix wakeup source leaks on device unbind mailbox: Not protect module_put with spin_lock_irqsave cifs: Fix cifs_query_path_info() for Windows NT servers CIP: Bump version suffix to -cip122 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.295. ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms ARM: dts: am335x-bone-common: Increase MDIO reset deassert time ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board ARM: dts: am335x-bone-common: get rid of phy_id property mtd: nand: sunxi: Add randomizer configuration before randomizer enable mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue() bridge: netfilter: Fix forwarding of fragmented packets vxlan: Annotate FDB data races hwmon: (gpio-fan) Add missing mutex locks nfs: handle failure of nfs_get_lock_context in unlock path sch_htb: make htb_deactivate() idempotent scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth() perf: Fix sample vs do_exit() jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata() mm/huge_memory: fix dereferencing invalid pmd migration entry posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del() net: atm: fix /proc/net/atm/lec handling net: atm: add lec_mutex calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer atm: atmtcp: Free invalid length skb in atmtcp_c_send(). mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu(). wifi: carl9170: do not ping device which has failed to load firmware drm/nouveau/bl: increase buffer size to avoid truncate warning ALSA: hda/realtek: enable headset mic on Latitude 5420 Rugged ALSA: hda/intel: Add Thinkpad E15 to PM deny list Input: sparcspkr - avoid unannotated fall-through HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse() atm: Revert atm_account_tx() if copy_from_iter_full() fails. selinux: fix selinux_xfrm_alloc_user() to set correct ctx_len scsi: s390: zfcp: Ensure synchronous unit_add jffs2: check jffs2_prealloc_raw_node_refs() result in few other places jffs2: check that raw node were preallocated before writing summary drivers/rapidio/rio_cm.c: prevent possible heap overwrite Revert "x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2" on v6.6 and older powerpc/eeh: Fix missing PE bridge reconfiguration during VFIO EEH recovery platform/x86: dell_rbu: Stop overwriting data buffer tee: Prevent size calculation wraparound on 32-bit kernels ARM: OMAP2+: Fix l4ls clk domain handling in STANDBY bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value watchdog: da9052_wdt: respect TWDMIN i40e: fix MMIO write access to an invalid page in i40e_clear_hw sock: Correct error checking condition for (assign|release)_proto_idx() vxlan: Do not treat dst cache initialization errors as fatal clk: rockchip: rk3036: mark ddrphy as critical wifi: mac80211: do not offer a mesh path if forwarding is disabled net: mlx4: add SOF_TIMESTAMPING_TX_SOFTWARE flag when getting ts info pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() ipv4/route: Use this_cpu_inc() for stats on PREEMPT_RT tcp: always seek for minimal rtt in tcp_rcv_rtt_update() net: dlink: add synchronization for stats update sctp: Do not wake readers in __sctp_write_space() emulex/benet: correct command version selection in be_cmd_get_stats() i2c: designware: Invoke runtime suspend on quick slave re-registration net: macb: Check return value of dma_set_mask_and_coherent() cpufreq: Force sync policy boost with global boost on sysfs update nios2: force update_mmu_cache on spurious tlb-permission--related pagefaults media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode() media: tc358743: ignore video while HPD is low drm/amdkfd: Set SDMA_RLCx_IB_CNTL/SWITCH_INSIDE_IB jfs: Fix null-ptr-deref in jfs_ioc_trim drm/amdgpu/gfx9: fix CSIB handling drm/amdgpu/gfx8: fix CSIB handling jfs: fix array-index-out-of-bounds read in add_missing_indices drm/amdgpu/gfx7: fix CSIB handling drm/amd/display: Add NULL pointer checks in dm_force_atomic_commit() media: uapi: v4l: Fix V4L2_TYPE_IS_OUTPUT condition sunrpc: update nextcheck time when adding new cache entries drm/amdgpu/gfx6: fix CSIB handling ACPI: battery: negate current when discharging power: supply: bq27xxx: Retrieve again when busy ACPICA: fix acpi parse and parseext cache leaks ACPICA: Avoid sequence overread in call to strncmp() ACPICA: fix acpi operand cache leak in dswstate.c PCI: Fix lock symmetry in pci_slot_unlock() regulator: max14577: Add error check for max14577_read_reg() staging: iio: ad5933: Correct settling cycles encoding per datasheet net: ch9200: fix uninitialised access during mii_nway_restart ftrace: Fix UAF when lookup kallsym after ftrace disabled dm-mirror: fix a tiny race condition mm: fix ratelimit_pages update error in dirty_ratio_handler() ipc: fix to protect IPCS lookups using RCU parisc: fix building with gcc-15 vgacon: Add check for vc_origin address range in vgacon_scroll() NFC: nci: uart: Set tty->disc_data only in success path f2fs: prevent kernel warning due to negative i_nlink from corrupted image Input: ims-pcu - check record size in ims_pcu_flash_firmware() ext4: fix calculation of credits for extent tree modification ext4: inline: fix len overflow in ext4_prepare_inline_data ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330 media: v4l2-dev: fix error handling in __video_register_device() media: gspca: Add error handling for stv06xx_read_sensor() wifi: rtlwifi: disable ASPM for RTL8723BE with subsystem ID 11ad:1723 nfsd: nfsd4_spo_must_allow() must check this is a v4 compound request wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() gfs2: move msleep to sleepable context configfs: Do not override creating attribute file failure in populate_attrs() calipso: unlock rcu before returning -EAFNOSUPPORT usb: Flush altsetting 0 endpoints before reinitializating them after reset. fs/filesystems: Fix potential unsigned integer underflow in fs_name() net/mdiobus: Fix potential out-of-bounds read/write access MIPS: Move '-Wa,-msoft-float' check from as-option to cc-option x86/boot/compressed: prefer cc-option for CFLAGS additions net: mdio: C22 is now optional, EOPNOTSUPP if not provided i40e: retry VFLR handling if there is ongoing VF reset i40e: return false from i40e_reset_vf if reset is in progress net_sched: sch_sfq: fix a potential crash on gso_skb handling scsi: iscsi: Fix incorrect error path labels for flashnode operations NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes NFSD: Fix ia_size underflow Input: synaptics-rmi - fix crash with unsupported versions of F34 Input: synaptics-rmi4 - convert to use sysfs_emit() APIs do_change_type(): refuse to operate on unmounted/not ours mounts net/mlx4_en: Prevent potential integer overflow calculating Hz rtc: Fix offset calculation for .start_secs < 0 rtc: sh: assign correct interrupts with DT perf tests switch-tracking: Fix timestamp comparison mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE mfd: exynos-lpass: Avoid calling exynos_lpass_disable() twice in exynos_lpass_remove() rpmsg: qcom_smd: Fix uninitialized return variable in __qcom_smd_send() perf ui browser hists: Set actions->thread before calling do_zoom_thread() fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod() soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() soc: aspeed: lpc: Fix impossible judgment condition arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou ARM: dts: qcom: apq8064 merge hw splinlock into corresponding syscon device bus: fsl-mc: fix double-free on mc_dev nilfs2: do not propagate ENOENT error from nilfs_btree_propagate() nilfs2: add pointer check for nilfs_direct_propagate() Squashfs: check return result of sb_min_blocksize ARM: dts: at91: at91sam9263: fix NAND chip selects ARM: dts: at91: usb_a9263: fix GPIO for Dataflash chip select f2fs: fix to correct check conditions in f2fs_cross_rename f2fs: use d_inode(dentry) cleanup dentry->d_inode calipso: Don't call calipso functions for AF_INET sk. net: lan743x: rename lan743x_reset_phy to lan743x_hw_reset_phy wifi: ath9k_htc: Abort software beacon handling if disabled bpf: Fix WARN() in get_bpf_raw_tp_regs pinctrl: at91: Fix possible out-of-boundary access net: ncsi: Fix GCPS 64-bit member variables f2fs: fix to do sanity check on sbi->total_valid_block_count drm/tegra: rgb: Fix the unbound reference count drm: rcar-du: Fix memory leak in rcar_du_vsps_init() selftests/seccomp: fix syscall_restart test for arm compat firmware: psci: Fix refcount leak in psci_dt_init m68k: mac: Fix macintosh_config for Mac II drm/vmwgfx: Add seqno waiter for sync_files ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions" x86/mtrr: Check if fixed-range MTRRs exist in mtrr_save_fixed_ranges() crypto: marvell/cesa - Avoid empty transfer descriptor crypto: marvell/cesa - Handle zero-length skcipher requests x86/cpu: Sanitize CPUID(0x80000000) output perf/core: Fix broken throttling when max_samples_per_tick=1 gfs2: gfs2_create_inode error handling fix netfilter: nft_socket: fix sk refcount leaks thunderbolt: Do not double dequeue a configuration request usb: usbtmc: Fix timeout value in get_stb usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device usb: quirks: Add NO_LPM quirk for SanDisk Extreme 55AE pinctrl: armada-37xx: set GPIO output value before setting direction pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31 tracing: Fix compilation warning on arm32 platform/x86: thinkpad_acpi: Ignore battery threshold change event notification platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys spi: spi-sun4i: fix early activation um: let 'make clean' properly clean underlying SUBARCH as well platform/x86: thinkpad_acpi: Support also NEC Lavie X1475JAS nfs: don't share pNFS DS connections between net namespaces HID: quirks: Add ADATA XPG alpha wireless mouse support coredump: fix error handling for replace_fd() smb: client: Reset all search buffer pointers when releasing buffer smb: client: Fix use-after-free in cifs_fill_dirent drm/i915/gvt: fix unterminated-string-initialization warning netfilter: nf_tables: do not defer rule destruction via call_rcu netfilter: nf_tables: wait for rcu grace period on net_device removal netfilter: nf_tables: pass nft_chain to destroy function, not nft_ctx mm/page_alloc.c: avoid infinite retries caused by cpuset race llc: fix data loss when reading from a socket in llc_ui_recvmsg() ALSA: pcm: Fix race of buffer access at PCM OSS layer can: bcm: add missing rcu read protection for procfs content can: bcm: add locking for bcm_op runtime updates crypto: algif_hash - fix double free in hash_accept net: dwmac-sun8i: Use parsed internal PHY address instead of 1 __legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock xenbus: Allow PVH dom0 a non-local xenstore btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013 pinctrl: meson: define the pull up/down resistor value as 60 kOhm drm: Add valid clones check regulator: ad5398: Add device tree support bpftool: Fix readlink usage in get_fd_type HID: usbkbd: Fix the bit shift number for LED_KANA scsi: st: Restore some drive settings after reset scsi: lpfc: Handle duplicate D_IDs in ndlp search-by D_ID routine hwmon: (xgene-hwmon) use appropriate type for the latency value ip: fib_rules: Fetch net from fib_rule in fib[46]_rule_configure(). net/mlx5: Extend Ethtool loopback selftest to support non-linear SKB net/mlx4_core: Avoid impossible mlx4_db_alloc() order value smack: recognize ipv4 CIPSO w/o categories pinctrl: devicetree: do not goto err when probing hogs in pinctrl_dt_to_map ASoC: ops: Enforce platform maximum on initial value ACPI: HED: Always initialize before evged PCI: Fix old_size lower bound in calculate_iosize() too EDAC/ie31200: work around false positive build warning net: pktgen: fix access outside of user given buffer in pktgen_thread_write() MIPS: pm-cps: Use per-CPU variables as per-CPU, not per-core MIPS: Use arch specific syscall name match function cpuidle: menu: Avoid discarding useful information x86/nmi: Add an emergency handler in nmi_desc & use it in nmi_shootdown_cpus() bonding: report duplicate MAC address in all situations net: xgene-v2: remove incorrect ACPI_PTR annotation x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2 net: pktgen: fix mpls maximum labels list parsing pinctrl: bcm281xx: Use "unsigned int" instead of bare "unsigned" media: cx231xx: set device_caps for 417 dm cache: prevent BUG_ON by blocking retries on failed device resumes media: c8sectpfe: Call of_node_put(i2c_bus) only once in c8sectpfe_probe() ARM: tegra: Switch DSI-B clock parent to PLLD on Tegra114 ieee802154: ca8210: Use proper setters and getters for bitwise types rtc: ds1307: stop disabling alarms on probe powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7 mmc: sdhci: Disable SD card clock before changing parameters posix-timers: Add cond_resched() to posix_timer_add() search loop xen: Add support for XenServer 6.1 platform device dm: restrict dm device size to 2^63-512 bytes kbuild: fix argument parsing in scripts/config scsi: st: ERASE does not change tape location scsi: st: Tighten the page format heuristics with MODE SELECT ext4: reorder capability check last um: Update min_low_pfn to match changes in uml_reserved um: Store full CSGSFS and SS register from mcontext btrfs: send: return -ENAMETOOLONG when attempting a path that is too long btrfs: avoid linker error in btrfs_find_create_tree_block() i2c: pxa: fix call balance of i2c->clk handling routines mmc: host: Wait for Vdd to settle on card power off pNFS/flexfiles: Report ENETDOWN as a connection error tools/build: Don't pass test log files to linker dql: Fix dql->limit value when reset. SUNRPC: rpc_clnt_set_transport() must not change the autobind setting NFSv4: Treat ENETUNREACH errors as fatal for state recovery fbdev: core: tileblit: Implement missing margin clearing for tileblit fbdev: fsl-diu-fb: add missing device_remove_file() mailbox: use error ret code of of_parse_phandle_with_args() kconfig: merge_config: use an empty file as initfile cgroup: Fix compilation issue due to cgroup_mutex not being exported dma-mapping: avoid potential unused data compilation warning scsi: target: iscsi: Fix timeout on deleted connection openvswitch: Fix unsafe attribute parsing in output_userspace() Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5 Input: synaptics - enable SMBus for HP Elitebook 850 G1 phy: Fix error handling in tegra_xusb_port_init ALSA: es1968: Add error handling for snd_pcm_hw_constraint_pow2() ACPI: PPTT: Fix processor subtable walk qlcnic: fix memory leak in qlcnic_sriov_channel_cfg_cmd() ALSA: sh: SND_AICA should depend on SH_DMA_API spi: loopback-test: Do not split 1024-byte hexdumps RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug staging: axis-fifo: Correct handling of tx_fifo_depth for size validation staging: axis-fifo: avoid parsing ignored device tree properties platform/x86: asus-wmi: Fix wlan_ctrl_by_user detection do_umount(): add missing barrier before refcount checks in sync case MIPS: Fix MAX_REG_OFFSET iio: adc: dln2: Use aligned_s64 for timestamp types: Complement the aligned types with signed 64-bit one USB: usbtmc: use interruptible sleep in usbtmc_read usb: typec: tcpm: delay SNK_TRY_WAIT_DEBOUNCE to SRC_TRYWAIT transition ocfs2: stop quota recovery before disabling quotas ocfs2: implement handshaking with ocfs2 recovery thread ocfs2: switch osb->disable_recovery to enum module: ensure that kobject_put() is safe for module type kobjects xenbus: Use kref to track req lifetime usb: uhci-platform: Make the clock really optional iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifo iio: adis16201: Correct inclinometer channel resolution Input: synaptics - enable InterTouch on Dell Precision M3800 Input: synaptics - enable InterTouch on Dynabook Portege X30L-G Input: synaptics - enable InterTouch on Dynabook Portege X30-D net: dsa: b53: fix learning on VLAN unaware bridges scsi: target: Fix WRITE_SAME No Data Buffer crash dm: fix copying after src array boundaries iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid irqchip/gic-v2m: Add const to of_device_id sch_htb: make htb_qlen_notify() idempotent of: module: add buffer overflow check in of_modalias() net: fec: ERR007885 Workaround for conventional TX lan743x: remove redundant initialization of variable current_head_index net: dlink: Correct endianness handling of led_mode tracing: Fix oob write in trace_seq_to_buffer() dm: always update the array size in realloc_argv on success wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage() amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offload i2c: imx-lpi2c: Fix clock count when probe defers EDAC/altera: Set DDR and SDMMC interrupt mask before registration EDAC/altera: Test the correct error reg offset signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro() x86/bugs: fix backport error in "x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline" x86/bugs: fix backport error in "x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline" CIP: Bump version suffix to -cip121 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.293. x86/bugs: Don't fill RSB on VMEXIT with eIBRS+retpoline clk: check for disabled clock-provider in of_clk_get_hw_from_clkspec() PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX MIPS: cm: Fix warning if MIPS_CM is disabled comedi: jr3_pci: Fix synchronous deletion of timer scsi: pm80xx: Set phy_attached to zero when device is gone ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls selftests: ublk: fix test_stripe_04 KVM: s390: Don't use %pK through tracepoints sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP ntb: reduce stack usage in idt_scan_mws qibfs: fix _another_ leak usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev() usb: host: max3421-hcd: Add missing spi_device_id table parisc: PDT: Fix missing prototype warning MIPS: cm: Detect CM quirks from device tree USB: VLI disk crashes if LPM is used usb: quirks: Add delay init quirk for SanDisk 3.2Gen1 Flash Drive usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash Drive usb: dwc3: gadget: check that event count does not exceed event buffer length USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02) USB: serial: simple: add OWON HDS200 series oscilloscope support USB: serial: option: add Sierra Wireless EM9291 USB: serial: ftdi_sio: add support for Abacus Electrics Optical Probe USB: storage: quirk for ADATA Portable HDD CH94 mcb: fix a double free bug in chameleon_parse_gdd() virtio_console: fix missing byte order handling for cols and rows net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too net_sched: hfsc: Fix a UAF vulnerability in class handling tipc: fix NULL pointer dereference in tipc_mon_reinit_self() net: phy: leds: fix memory leak cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate() misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error misc: pci_endpoint_test: Use INTX instead of LEGACY net: dsa: mv88e6xxx: fix VTU methods for 6320 family ext4: fix OOB read when checking dotdot dir ext4: optimize __ext4_check_dir_entry() MIPS: ds1287: Match ds1287_set_base_clock() function types MIPS: cevt-ds1287: Add missing ds1287.h include MIPS: dec: Declare which_prom() as static virtio-net: Add validation for used length openvswitch: fix lockup on tx to unregistering netdev with carrier net: openvswitch: fix race on port output mmc: cqhci: Fix checking of CQHCI_HALT state nvmet-fc: Remove unused functions usb: dwc3: support continuous runtime PM with dual role misc: pci_endpoint_test: Fix 'irq_type' to convey the correct type misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink(). kbuild: Add '-fno-builtin-wcslen' drm/sti: remove duplicate object names drm/repaper: fix integer overflows in repeat functions module: sign with sha512 instead of sha1 by default isofs: Prevent the use of too small fid i2c: cros-ec-tunnel: defer probe if parent EC is not present hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key btrfs: correctly escape subvol in btrfs_show_options() nfs: move nfs_fhandle_hash to common include file NFSD: Constify @fh argument of knfsd_fh_hash() asus-laptop: Fix an uninitialized variable writeback: fix false warning in inode_to_wb() net: b53: enable BPDU reception for management port net: openvswitch: fix nested key length validation in the set() action Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()" Bluetooth: btrtl: Prevent potential NULL dereference Bluetooth: hci_event: Fix sending MGMT_EV_DEVICE_FOUND for invalid address RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe() scsi: iscsi: Fix missing scsi_host_put() in error path wifi: wl1251: fix memory leak in wl1251_tx_work wifi: mac80211: Purge vif txq in ieee80211_do_stop() wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue() wifi: at76c50x: fix use after free access in at76_disconnect HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition Bluetooth: hci_uart: Fix another race during initialization x86/e820: Fix handling of subpage regions when calculating nosave ranges in e820__register_nosave_regions() PCI: Fix reference leak in pci_alloc_child_bus() of/irq: Fix device node refcount leakages in of_irq_init() of/irq: Fix device node refcount leakage in API irq_of_parse_and_map() gpio: zynq: Fix wakeup source leaks on device unbind ftrace: Add cond_resched() to ftrace_graph_set_hash() crypto: ccp - Fix check for the primary ASP device thermal/drivers/rockchip: Add missing rk3328 mapping entry sctp: detect and prevent references to a freed transport in sendmsg mm: add missing release barrier on PGDAT_RECLAIM_LOCKED unlock sparc/mm: disable preemption in lazy mmu mode arm64: dts: mediatek: mt8173: Fix disp-pwm compatible string mtd: inftlcore: Add error check for inftl_read_oob() lib: scatterlist: fix sg_split_phys to preserve original scatterlist offsets jbd2: remove wrong sb->s_sequence check ext4: fix off-by-one error in do_split media: venus: hfi_parser: add check to avoid out of bound access media: i2c: ov7251: Introduce 1 ms delay between regulators and en GPIO media: i2c: ov7251: Set enable GPIO low in probe media: v4l2-dv-timings: prevent possible overflow in v4l2_detect_gtf() media: streamzap: prevent processing IR data on URB failure mtd: rawnand: brcmnand: fix PM resume warning arm64: cputype: Add MIDR_CORTEX_A76AE xenfs/xensyms: respect hypervisor's "next" indication media: siano: Fix error handling in smsdvb_module_init() media: venus: hfi: add check to handle incorrect queue size media: venus: hfi: add a check to handle OOB in sfr region media: i2c: adv748x: Fix test pattern selection mask bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags bpf: Add endian modifiers to fix endian warnings fbdev: omapfb: Add 'plane' value check drm/mediatek: mtk_dpi: Explicitly manage TVD clock in power on/off drm/amdkfd: Fix pqm_destroy_queue race with GPU reset drm: allow encoder mode_set even when connectors change for crtc Bluetooth: hci_uart: fix race during initialization tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER net: vlan: don't propagate flags on open scsi: st: Fix array overflow in st_setup() ext4: ignore xattrs past end ext4: protect ext4_release_dquot against freezing ahci: add PCI ID for Marvell 88SE9215 SATA Controller ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode jfs: add sanity check for agwidth in dbMount jfs: Prevent copying of nlink with value 0 from disk inode fs/jfs: Prevent integer overflow in AG size calculation fs/jfs: cast inactags to s64 to prevent potential overflow ALSA: usb-audio: Fix CME quirk for UF series keyboards ALSA: hda: intel: Fix Optimus when GPU has no sound HID: pidff: Fix null pointer dereference in pidff_find_fields HID: pidff: Do not send effect envelope if it's empty HID: pidff: Convert infinite length from Linux API to PID standard perf: arm_pmu: Don't disable counter in armpmu_add() x86/cpu: Don't clear X86_FEATURE_LAHF_LM flag in init_amd_k8() on AMD when running in a virtual machine pm: cpupower: bench: Prevent NULL dereference on malloc failure net: ppp: Add bound checking for skb data on ppp_sync_txmung ata: sata_sx4: Add error handling in pdc20621_i2c_read() ata: sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones tipc: fix memory leak in tipc_link_xmit ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe() CIP: Bump version suffix to -cip120 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.292. net: dsa: mv88e6xxx: propperly shutdown PPU re-enable timer on destroy jfs: add index corruption check to DT_GETPAGE() jfs: fix slab-out-of-bounds read in ea_get() tracing: Fix use-after-free in print_graph_function_flags during tracer switching mmc: sdhci-pxav3: set NEED_RSP_BUSY capability x86/tsc: Always save/restore TSC sched_clock() on suspend/resume ntb_perf: Delete duplicate dmaengine_unmap_put() call in perf_copy_chunk() arcnet: Add NULL check in com20020pci_probe() ipv6: fix omitted netlink attributes when using RTEXT_FILTER_SKIP_STATS vsock: avoid timeout during connect() if the socket is closing net_sched: skbprio: Remove overly strict queue assertions netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets ntb: intel: Fix using link status DB's ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans spufs: fix a leak in spufs_create_context() spufs: fix a leak on spufs_new_file() failure hwmon: (nct6775-core) Fix out of bounds access for NCT679{8,9} sched/deadline: Use online cpus for validating runtime affs: don't write overlarge OFS data block size fields affs: generate OFS sequence numbers starting at 1 wifi: iwlwifi: fw: allocate chained SG tables for dump sched/smt: Always inline sched_smt_active() ring-buffer: Fix bytes_dropped calculation issue objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() fs/procfs: fix the comment above proc_pid_wchan() perf python: Check if there is space to copy all the event perf python: Decrement the refcount of just created event on failure perf python: Fixup description of sample.id event member ocfs2: validate l_tree_depth to avoid out-of-bounds access perf units: Fix insufficient array space iio: accel: mma8452: Ensure error return on failure to matching oversampling ratio coresight: catu: Fix number of pages while using 64k pages isofs: fix KMSAN uninit-value bug in do_isofs_readdir() x86/dumpstack: Fix inaccurate unwinding from exception stacks due to misplaced assignment mfd: sm501: Switch to BIT() to mitigate integer overflows RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow power: supply: max77693: Fix wrong conversion of charge input threshold value x86/entry: Fix ORC unwinder for PUSH_REGS with save_ret=1 IB/mad: Check available slots before posting receive WRs clk: rockchip: rk3328: fix wrong clk_ref_usb3otg parent lib: 842: Improve error handling in sw842_compress() clk: amlogic: gxbb: drop incorrect flag on 32k clock fbdev: sm501fb: Add some geometry checks. mdacon: rework dependency list fbdev: au1100fb: Move a variable assignment behind a null pointer check PCI/portdrv: Only disable pciehp interrupts early when needed ALSA: hda/realtek: Always honor no_shutup_pins perf/ring_buffer: Allow the EPOLLRDNORM flag for poll lockdep: Don't disable interrupts on RT in disable_irq_nosync_lockdep.*() thermal: int340x: Add NULL check for adev EDAC/ie31200: Fix the error path order of ie31200_init() EDAC/ie31200: Fix the DIMM size mask for several SoCs x86/fpu: Avoid copying dynamic FP state from init_task in arch_dup_task_struct() cpufreq: governor: Fix negative 'idle_time' handling in dbs_update() net: usb: usbnet: restore usb%d name exception for local mac addresses net: usb: qmi_wwan: add Telit Cinterion FE990B composition net: usb: qmi_wwan: add Telit Cinterion FN990B composition tty: serial: 8250: Add some more device IDs netfilter: socket: Lookup orig tuple for IPv6 SNAT ARM: 9351/1: fault: Add "cut here" line for prefetch aborts ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed() atm: Fix NULL pointer dereference ALSA: usb-audio: Add quirk for Plantronics headsets to fix control names drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse() batman-adv: Ignore own maximum aggregation size during RX ARM: shmobile: smp: Enforce shmobile_smp_* alignment mmc: atmel-mci: Add missing clk_disable_unprepare() net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES net: atm: fix use after free in lec_send() Bluetooth: Fix error code in chan_alloc_skb_cb() RDMA/hns: Fix wrong value of max_sge_rd RDMA/bnxt_re: Avoid clearing VLAN_ID mask in modify qp path xfrm_output: Force software GSO only in tunnel mode i2c: sis630: Fix an error handling path in sis630_probe() i2c: ali15x3: Fix an error handling path in ali15x3_probe() i2c: ali1535: Fix an error handling path in ali1535_probe() ASoC: codecs: wm0010: Fix error handling path in wm0010_spi_probe() drm/gma500: Add NULL check for pci_gfx_root in mid_get_vbt_data() qlcnic: fix memory leak issues in qlcnic_sriov_common.c drm/amd/display: Assign normalized_pix_clk when color depth = 14 x86/microcode/AMD: Fix out-of-bounds on systems with CPU-less NUMA nodes USB: serial: option: match on interface class for Telit FN990B USB: serial: option: fix Telit Cinterion FE990A name USB: serial: option: add Telit Cinterion FE990B compositions USB: serial: ftdi_sio: add support for Altera USB Blaster 3 block: fix 'kmem_cache of name 'bio-108' already exists' drm/nouveau: Do not override forced connector status x86/irq: Define trace events conditionally nvme: only allow entering LIVE from CONNECTING state sctp: Fix undefined behavior in left shift operation nvmet-rdma: recheck queue state is LIVE in state lock in recv done s390/cio: Fix CHPID "configure" attribute caching HID: ignore non-functional sensor in HP 5MP Camera iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() powercap: call put_device() on an error path in powercap_register_control_type() nvme-fc: go straight to connecting state when initializing net_sched: Prevent creation of classes with TC_H_ROOT ipvs: prevent integer overflow in do_ip_vs_get_ctl() netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree() Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio() drivers/hv: Replace binary semaphore with mutex netpoll: hold rcu read lock in __netpoll_send_skb() netpoll: netpoll_send_skb() returns transmit status netpoll: move netpoll_send_skb() out of line netpoll: remove dev argument from netpoll_send_skb_on_dev() netpoll: Fix use correct return type for ndo_start_xmit() pinctrl: bcm281xx: Fix incorrect regmap max_registers value sctp: sysctl: auth_enable: avoid using current->nsproxy sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy Revert "sctp: sysctl: auth_enable: avoid using current->nsproxy" Revert "sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy" sched/isolation: Prevent boot crash when the boot CPU is nohz_full CIP: Bump version suffix to -cip119 after merge from cip/linux-4.19.y-st tree watchdog: renesas_wdt: support handover from bootloader Update localversion-st, tree is up-to-date with 5.4.291. gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl(). gtp: Destroy device along with udp socket's netns dismantle. net: gso: fix ownership in __udp_gso_segment vlan: fix memory leak in vlan_newlink() batman-adv: Drop unmanaged ELP metric worker tee: optee: Fix supplicant wait loop pps: Fix a use-after-free net: rose: lock the socket in rose_bind() btrfs: fix use-after-free when attempting to join an aborted transaction media: lmedm04: Handle errors for lme2510_int_read wifi: rtlwifi: rtl8192se: rise completion of firmware loading as last step eeprom: digsy_mtc: Make GPIO lookup table match the device slimbus: messaging: Free transaction ID in delayed interrupt scenario intel_th: pci: Add Panther Lake-P/U support intel_th: pci: Add Panther Lake-H support intel_th: pci: Add Arrow Lake support Squashfs: check the inode number is not the invalid value of zero xhci: pci: Fix indentation in the PCI device ID definitions usb: gadget: Check bmAttributes only if configuration is valid usb: gadget: Fix setting self-powered state on suspend usb: gadget: Set self-powered based on MaxPower and bmAttributes usb: typec: tcpci_rt1711h: Unmask alert interrupts to fix functionality usb: typec: ucsi: increase timeout for PPM reset operations usb: atm: cxacru: fix a flaw in existing endpoint checks usb: quirks: Add DELAY_INIT and NO_LPM for Prolific Mass Storage Card Reader usb: renesas_usbhs: Use devm_usb_get_phy() Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection" net: ipv6: fix missing dst ref drop in ila lwtunnel net: ipv6: fix dst ref loop in ila lwtunnel net-timestamp: support TCP GSO case for a few missing flags vlan: enforce underlying device type ppp: Fix KMSAN uninit-value warning with bpf be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe() llc: do not use skb_get() before dev_queue_xmit() hwmon: (ad7314) Validate leading zero bits and return error hwmon: (ntc_thermistor) Fix the ncpXXxh103 sensor table hwmon: (pmbus) Initialise page count in pmbus_identify() caif_virtio: fix wrong pointer check in cfv_probe() HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove() mm/page_alloc: fix uninitialized variable rapidio: fix an API misues when rio_add_net() fails rapidio: add check for rio_add_net() in rio_scan_alloc_net() wifi: nl80211: reject cooked mode if it is set along with other flags wifi: cfg80211: regulatory: improve invalid hints checking x86/cpu: Properly parse CPUID leaf 0x2 TLB descriptor 0x63 x86/cpu: Validate CPUID leaf 0x2 EDX output x86/cacheinfo: Validate CPUID leaf 0x2 EDX output platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M ALSA: hda/realtek: update ALC222 depop optimize ALSA: hda: intel: Add Dell ALC3271 to power_save denylist HID: appleir: Fix potential NULL dereference at raw event handle Revert "of: reserved-memory: Fix using wrong number of cells to get property 'alignment'" drm/amdgpu: disable BAR resize on Dell G5 SE drm/amdgpu: Check extended configuration space register when system uses large bar drm/amdgpu: skip BAR resizing if the bios already did it acct: perform last write from workqueue kernel/acct.c: use dedicated helper to access rlimit values kernel/acct.c: use #elif instead of #end and #elif pfifo_tail_enqueue: Drop new packet when sch->limit == 0 sched/core: Prevent rescheduling when interrupts are disabled phy: exynos5-usbdrd: fix MPLL_MULTIPLIER and SSC_REFCLKSEL masks in refclk usbnet: gl620a: fix endpoint checking in genelink_bind() perf/core: Fix low freq setting via IOC_PERIOD ftrace: Avoid potential division by zero in function_stat_show() x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systems ipvs: Always clear ipvs_property flag in skb_scrub_packet() ASoC: es8328: fix route from DAC to output net: cadence: macb: Synchronize stats calculations sunrpc: suppress warnings for unused procfs functions batman-adv: Ignore neighbor throughput metrics in error case acct: block access to kernel internal filesystems ALSA: hda/conexant: Add quirk for HP ProBook 450 G4 mute LED nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() power: supply: da9150-fg: fix potential overflow geneve: Suppress list corruption splat in geneve_destroy_tunnels(). geneve: Fix use-after-free in geneve_find_dev(). powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC ALSA: hda/realtek - Add type for ALC287 powerpc/64s: Rewrite __real_pte() and __rpte_to_hidx() as static inline powerpc/64s/mm: Move __real_pte stubs into hash-4k.h USB: gadget: f_midi: f_midi_complete to call queue_work usb/gadget: f_midi: Replace tasklet with work usb/gadget: f_midi: convert tasklets to use new tasklet_setup() API usb: dwc3: Fix timeout issue during controller enter/exit from halt state mm: update mark_victim tracepoints fields crypto: testmgr - some more fixes to RSA test vectors crypto: testmgr - populate RSA CRT parameters in RSA test vectors crypto: testmgr - fix version number of RSA tests crypto: testmgr - Fix wrong test case of RSA crypto: testmgr - fix wrong key length for pkcs1pad driver core: bus: Fix double free in driver API bus_register() scsi: storvsc: Set correct data length for sending SCSI command without payload vlan: move dev_put into vlan_dev_uninit vlan: introduce vlan_dev_free_egress_priority Revert "btrfs: avoid monopolizing a core when activating a swap file" parport_pc: add support for ASIX AX99100 can: ems_pci: move ASIX AX99100 ids to pci_ids.h nilfs2: protect access to buffers with no active references nilfs2: do not force clear folio if buffer is referenced nilfs2: do not output warnings when clearing dirty buffers alpha: replace hardcoded stack offsets with autogenerated ones ndisc: extend RCU protection in ndisc_send_skb() openvswitch: use RCU protection in ovs_vport_cmd_fill_info() arp: use RCU protection in arp_xmit() neighbour: use RCU protection in __neigh_notify() neighbour: delete redundant judgment statements ndisc: use RCU protection in ndisc_alloc_skb() ipv6: use RCU protection in ip6_default_advmss() ipv4: use RCU protection in inet_select_addr() ipv4: use RCU protection in rt_is_expired() net: add dev_net_rcu() helper net: treat possible_net_t net pointer as an RCU one and add read_pnet_rcu() partitions: mac: fix handling of bogus partition table gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock alpha: align stack for page fault and user unaligned trap handlers alpha: make stack 16-byte aligned (most cases) can: c_can: fix unbalanced runtime PM disable in error path USB: serial: option: drop MeiG Smart defines USB: serial: option: fix Telit Cinterion FN990A name USB: serial: option: add Telit Cinterion FN990B compositions USB: serial: option: add MeiG Smart SLM828 usb: cdc-acm: Fix handling of oversized fragments usb: cdc-acm: Check control transfer buffer size before access USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk USB: hub: Ignore non-compliant devices with too many configs or interfaces usb: gadget: f_midi: fix MIDI Streaming descriptor lengths USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI usb: dwc2: gadget: remove of_node reference upon udc_stop usb: gadget: udc: renesas_usb3: Fix compiler warning usb: roles: set switch registered flag early on batman-adv: fix panic during interface removal ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V orangefs: fix a oob in orangefs_debug_write Grab mm lock before grabbing pt lock vfio/pci: Enable iowrite64 and ioread64 for vfio pci media: cxd2841er: fix 64-bit division on gcc-9 xen: remove a confusing comment on auto-translated guest I/O gpio: bcm-kona: Add missing newline to dev_err format string gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0 arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array team: better TEAM_OPTION_TYPE_STRING validation vrf: use RCU protection in l3mdev_l3_out() ndisc: ndisc_send_redirect() must use dev_get_by_index_rcu() HID: multitouch: Add NULL check in mt_input_configured ocfs2: check dir i_size in ocfs2_find_entry MIPS: ftrace: Declare ftrace_get_parent_ra_addr() as static ptp: Ensure info->enable callback is always set mtd: onenand: Fix uninitialized retlen in do_otp_read() NFC: nci: Add bounds checking in nci_hci_create_pipe() nilfs2: fix possible int overflows in nilfs_fiemap() ocfs2: handle a symlink read error correctly ocfs2: fix incorrect CPU endianness conversion causing mount failure nvmem: core: improve range check for nvmem_cell_write() crypto: qce - fix goto jump in error path media: uvcvideo: Remove redundant NULL assignment media: uvcvideo: Fix event flags in uvc_ctrl_send_events media: ov5640: fix get_light_freq on auto soc: qcom: smem_state: fix missing of_node_put in error path powerpc/pseries/eeh: Fix get PE state translation serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use serial: sh-sci: Drop __initdata macro for port_cfg usb: gadget: f_tcm: Don't prepare BOT write request twice usb: gadget: f_tcm: ep_autoconfig with fullspeed endpoint usb: gadget: f_tcm: Decrement command ref count on cleanup usb: gadget: f_tcm: Translate error to sense wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() HID: hid-sensor-hub: don't use stale platform-data on remove of: reserved-memory: Fix using wrong number of cells to get property 'alignment' of: Fix of_find_node_opts_by_path() handling of alias+path+options of: Correct child specifier used as input of the 2nd nexus node clk: qcom: clk-alpha-pll: fix alpha mode configuration Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc KVM: s390: vsie: fix some corner-cases when grabbing vsie pages KVM: Explicitly verify target vCPU is online in kvm_get_vcpu() arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma binfmt_flat: Fix integer overflow bug on 32 bit systems m68k: vga: Fix I/O defines s390/futex: Fix FUTEX_OP_ANDN implementation leds: lp8860: Write full EEPROM, not only half of it cpufreq: s3c64xx: Fix compilation warning tun: revert fix group permission check netem: Update sch->q.qlen before qdisc_tree_reduce_backlog() udp: gso: do not drop small packets when PMTU reduces tg3: Disable tg3 PCIe AER on system reboot firmware: iscsi_ibft: fix ISCSI_IBFT Kconfig entry nvme: handle connectivity loss in nvme_set_queue_count usb: xhci: Fix NULL pointer dereference on certain command aborts usb: xhci: Add timeout argument in address_device USB HCD callback media: uvcvideo: Remove dangling pointers media: uvcvideo: Only save async fh if success nilfs2: handle errors that nilfs_prepare_chunk() may return nilfs2: eliminate staggered calls to kunmap in nilfs_rename nilfs2: move page release outside of nilfs_delete_entry and nilfs_set_link x86/mm: Don't disable PCID when INVLPG has been fixed by microcode HID: Wacom: Add PCI Wacom device support mfd: lpc_ich: Add another Gemini Lake ISA bridge PCI device-id wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() mmc: core: Respect quirk_max_rate for non-UHS SDIO card tun: fix group permission check printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX sched: Don't try to catch up excess steal time. btrfs: convert BUG_ON in btrfs_reloc_cow_block() to proper error handling btrfs: output the reason for open_ctree() failure usb: gadget: f_tcm: Don't free command immediately media: uvcvideo: Fix double free in error path usb: typec: tcpm: set SRC_SEND_CAPABILITIES timeout to PD_T_SENDER_RESPONSE drivers/card_reader/rtsx_usb: Restore interrupt based detection ktest.pl: Check kernelrelease return in get_version NFSD: Reset cb_seq_status after NFS4ERR_DELAY hexagon: Fix unbalanced spinlock in die() hexagon: fix using plain integer as NULL pointer warning in cmpxchg genksyms: fix memory leak when the same symbol is read from *.symref file genksyms: fix memory leak when the same symbol is added from source net: sh_eth: Fix missing rtnl lock in suspend/resume path vsock: Allow retrying on connect() failure net: davicom: fix UAF in dm9000_drv_remove net: rose: fix timer races against user threads PM: hibernate: Add error handling for syscore_suspend() net: fec: implement TSO descriptor cleanup ubifs: skip dumping tnc tree when zroot is null dmaengine: ti: edma: fix OF node reference leaks in edma_driver module: Extend the preempt disabled section in dereference_symbol_descriptor(). ocfs2: mark dquot as inactive if failed to start trans while releasing dquot scsi: mpt3sas: Set ioc->manu_pg11.EEDPTagMode directly to 1 media: camif-core: Add check for clk_enable() media: mipi-csis: Add check for clk_enable() PCI: endpoint: Destroy the EPC device in devm_pci_epc_destroy() media: rc: iguanair: handle timeouts fbdev: omapfb: Fix an OF node leak in dss_of_port_get_parent_device() ARM: dts: mediatek: mt7623: fix IR nodename arm64: dts: mediatek: mt8173-evb: Fix MT6397 PMIC sub-node names arm64: dts: mediatek: mt8173-evb: Drop regulator-compatible property rdma/cxgb4: Prevent potential integer overflow on 32bit RDMA/mlx4: Avoid false error about access to uninitialized gids array perf report: Fix misleading help message about --demangle perf top: Don't complain about lack of vmlinux when not resolving some kernel samples padata: fix sysfs store callback check ktest.pl: Remove unused declarations in run_bisect_test function net: sched: Disallow replacing of child qdisc from one parent to another net/mlxfw: Drop hard coded max FW flash image size selftests: harness: fix printing of mismatch values in __EXPECT() selftests/harness: Display signed values correctly wifi: wlcore: fix unbalanced pm_runtime calls regulator: of: Implement the unwind path of of_regulator_match() team: prevent adding a device which is already a team device lower cpupower: fix TSC MHz calculation wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: remove unused dualmac control leftovers rtlwifi: replace usage of found with dedicated list iterator variable wifi: rtlwifi: usb: fix workqueue leak when probe fails wifi: rtlwifi: do not complete firmware loading needlessly drm/amdgpu: Fix potential NULL pointer dereference in atomctrl_get_smc_sclk_range_table drm/etnaviv: Fix page property being used for non writecombine buffers afs: Fix directory format encoding struct overflow: Allow mixed type arguments overflow: Correct check_shl_overflow() comment overflow: Add __must_check attribute to check_*() helpers udf: Fix use of check_add_overflow() with mixed type arguments CIP: Bump version suffix to -cip118 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.290. gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp(). arm64: dts: rockchip: add hevc power domain clock to rk3328 Partial revert of xhci: use pm_ptr() instead #ifdef for CONFIG_PM conditionals xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals Input: xpad - add support for wooting two he (arm) Input: xpad - add unofficial Xbox 360 wireless receiver clone Input: atkbd - map F23 key to support default copilot shortcut Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null" USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() vfio/platform: check the bounds of read/write syscalls net/xen-netback: prevent UAF in xenvif_flush_hash() m68k: Add missing mmap_read_lock() to sys_cacheflush() m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag irqchip/sunxi-nmi: Add missing SKIP_WAKE flag scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request ASoC: wm8994: Add depends on MFD core net: fix data-races around sk->sk_forward_alloc scsi: sg: Fix slab-use-after-free read in sg_release() ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev() irqchip/gic-v3: Handle CPU_PM_ENTER_FAILED correctly fs/proc: fix softlockup in __read_vmcore (part 2) poll_wait: add mb() to fix theoretical race between waitqueue_active() and .poll() hfs: Sanity check the root record mac802154: check local interfaces before deleting sdata list i2c: mux: demux-pinctrl: check initial mux selection, too nfp: bpf: prevent integer overflow in nfp_bpf_event_output() gtp: use exit_batch_rtnl() method net: add exit_batch_rtnl() method net: net_namespace: Optimize the code net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field() sctp: sysctl: rto_min/max: avoid using current->nsproxy ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv ocfs2: correct return value of ocfs2_local_free_info() phy: core: Fix that API devm_of_phy_provider_unregister() fails to unregister the phy provider phy: core: fix code style in devm_of_phy_provider_unregister arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399 arm64: dts: rockchip: fix defines in pd_vio node for rk3399 iio: inkern: call iio_device_put() only on mapped devices iio: adc: at91: call input_free_device() on allocated iio_dev iio: adc: ti-ads8688: fix information leak in triggered buffer iio: imu: kmx61: fix information leak in triggered buffer iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer iio: pressure: zpa2326: fix information leak in triggered buffer usb: gadget: f_fs: Remove WARN_ON in functionfs_bind usb: fix reference leak in usb_new_device() USB: usblp: return error when setting unsupported protocol usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null USB: serial: cp210x: add Phoenix Contact UPS Device usb-storage: Add max sectors quirk for Nokia 208 staging: iio: ad9832: Correct phase range check staging: iio: ad9834: Correct phase range check USB: serial: option: add Neoway N723-EA support USB: serial: option: add MeiG Smart SRM815 drm/amd/display: Add check for granularity in dml ceil/floor helpers sctp: sysctl: auth_enable: avoid using current->nsproxy sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy dm thin: make get_first_thin use rcu-safe list first function tcp/dccp: allow a connection when sk_max_ack_backlog is zero tcp/dccp: complete lockless accesses to sk->sk_max_ack_backlog net: 802: LLC+SNAP OID:PID lookup on start of skb data ieee802154: ca8210: Add missing check for kfifo_alloc() in ca8210_probe() dm array: fix cursor index when skipping across block boundaries dm array: fix unreleased btree blocks on closing a faulty array cursor dm array: fix releasing a faulty array block twice in dm_array_cursor_end jbd2: flush filesystem device before updating tail sequence ravb: Fix use-after-free issue in ravb_tx_timeout_work() net/sched: netem: fix backport of "account for backlog updates from child qdisc" CIP: Bump version suffix to -cip117 after merge from cip/linux-4.19.y-st tree Update localversion-st, tree is up-to-date with 5.4.289. RDMA/bnxt_re: Fix max_qp_wrs reported net/sched: netem: account for backlog updates from child qdisc net/sched: cbs: Fix integer overflow in cbs_set_port_rate() netfilter: nft_set_hash: skip duplicated elements pending gc run drm/etnaviv: flush shader L1 cache after user commandstream usb: yurex: make waiting on yurex_write interruptible perf trace: Avoid garbage when not printing a syscall's arguments scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device mm: vmscan: account for free pages to prevent infinite Loop in throttle_direct_reclaim() drm: adv7511: Drop dsi single lane support net/sctp: Prevent autoclose integer overflow in sctp_association_init() sky2: Add device ID 11ab:4373 for Marvell 88E8075 pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking modpost: fix the missed iteration for the max bit in do_input() modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base net: usb: qmi_wwan: add Telit FE910C04 compositions sound: usb: format: don't warn that raw DSD is unsupported wifi: mac80211: wake the queues in case of failure in resume ila: serialize calls to nf_register_net_hooks() af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK af_packet: fix vlan_get_tci() vs MSG_PEEK ALSA: usb-audio: US16x08: Initialize array before use net: llc: reset skb->transport_header netrom: check buffer length before accessing it drm/bridge: adv7511_audio: Update Audio InfoFrame properly drm: bridge: adv7511: Enable SPDIF DAI RDMA/bnxt_re: Fix reporting hw_ver in query_device RDMA/bnxt_re: Add check for path mtu in modify_qp Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet selinux: ignore unknown extended permissions btrfs: avoid monopolizing a core when activating a swap file tracing: Constify string literal data member in struct trace_event_call MIPS: Probe toolchain support of -msym32 virtio-blk: don't keep queue frozen during system suspend platform/x86: asus-nb-wmi: Ignore unknown event 0xCF regmap: Use correct format specifier for logging range errors scsi: qla1280: Fix hw revision numbering for ISP1020/1040 tracing/kprobe: Make trace_kprobe's module callback called after jump_label update mtd: rawnand: fix double free in atmel_pmecc_create_user() dmaengine: at_xdmac: avoid null_prt_deref in at_xdmac_prep_dma_memset dmaengine: mv_xor: fix child node refcount handling in early exit phy: core: Fix that API devm_phy_destroy() fails to destroy the phy phy: core: Fix that API devm_phy_put() fails to release the phy phy: core: Fix an OF node refcount leakage in of_phy_provider_lookup() phy: core: Fix an OF node refcount leakage in _of_phy_get() mtd: diskonchip: Cast an operand to prevent potential overflow nfsd: restore callback functionality for NFSv4.0 bpf: Check negative offsets in __bpf_skb_min_len() media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg of: Fix error path in of_parse_phandle_with_args_map() nilfs2: prevent use of deleted inode of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one() NFS/pnfs: Fix a live lock between recalled layouts and layoutget zram: refuse to use zero sized block device as backing device sh: clk: Fix clk_enable() to return 0 on NULL clk USB: serial: option: add Telit FE910C04 rmnet compositions USB: serial: option: add MediaTek T7XX compositions USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready USB: serial: option: add MeiG Smart SLM770A USB: serial: option: add TCL IK512 MBIM & ECM efivarfs: Fix error on non-existent file i2c: riic: Always round-up when calculating bus period chelsio/chtls: prevent potential integer overflow on 32bit mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk netfilter: ipset: Fix for recursive locking warning net: ethernet: bgmac-platform: fix an OF node reference leak net: hinic: Fix cleanup in create_rxqs/txqs() net/smc: check sndbuf_space again after NOSPACE flag is set in smc_poll i2c: pnx: Fix timeout in wait functions PCI: Add ACS quirk for Broadcom BCM5760X NIC ALSA: usb: Fix UBSAN warning in parse_audio_unit() PCI/AER: Disable AER service on suspend net: sched: fix ordering of qlen adjustment ALSA: usb-audio: Fix a DMA to stack memory bug xen/netfront: fix crash when removing device KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status qca_spi: Make driver probing reliable ACPI: resource: Fix memory resource type union access net: lapb: increase LAPB_HEADER_LEN batman-adv: Do not let TT changes list grows indefinitely batman-adv: Remove uninitialized data in full table TT response batman-adv: Do not send uninitialized TT changes usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer usb: ehci-hcd: fix call balance of clocks handling routines usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys() usb: host: max3421-hcd: Correctly abort a USB request. bpf, xdp: Update devmap comments to reflect napi/rcu usage ALSA: usb-audio: Fix out of bounds reads when finding clock sources PCI: rockchip-ep: Fix address translation unit programming Revert "drm/amdgpu: add missing size check in amdgpu_debugfs_gprwave_read()" modpost: Add .irqentry.text to OTHER_SECTIONS ocfs2: Revert "ocfs2: fix the la space leak when unmounting an ocfs2 volume" jffs2: Fix rtime decompressor jffs2: Prevent rtime decompress memory corruption KVM: arm64: vgic-its: Clear ITE when DISCARD frees an ITE KVM: arm64: vgic-its: Clear DTE when MAPD unmaps a device KVM: arm64: vgic-its: Add a data length check in vgic_its_save_* misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle powerpc/prom_init: Fixup missing powermac #size-cells usb: chipidea: udc: handle USB Error Interrupt if IOC not set PCI: Add 'reset_subordinate' to reset hierarchy below bridge nvdimm: rectify the illogical code within nd_dax_probe() scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset scsi: st: Don't modify unknown block number in MTIOCGET leds: class: Protect brightness_show() with led_cdev->led_access mutex tracing: Use atomic64_inc_return() in trace_clock_counter() netpoll: Use rcu_access_pointer() in __netpoll_setup rocker: fix link status detection in rocker_carrier_init() ASoC: hdmi-codec: reorder channel allocation list wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: ipw2x00: libipw_rx_any(): fix bad alignment jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree jfs: fix array-index-out-of-bounds in jfs_readdir jfs: fix shift-out-of-bounds in dbSplit jfs: array-index-out-of-bounds fix in dtReadFirst wifi: ath5k: add PCI ID for Arcadyan devices wifi: ath5k: add PCI ID for SX76X net: inet6: do not leave a dangling sk pointer in inet6_create() net: inet: do not leave a dangling sk pointer in inet_create() net: ieee802154: do not leave a dangling sk pointer in ieee802154_create() net: af_can: do not leave a dangling sk pointer in can_create() Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create() af_packet: avoid erroring out after sock_init_data() in packet_create() net: ethernet: fs_enet: Use %pa to format resource_size_t net: fec_mpc52xx_phy: Use %pa to format resource_size_t samples/bpf: Fix a resource leak drm/radeon/r600_cs: Fix possible int overflow in r600_packet3_check() media: cx231xx: Add support for Dexatek USB Video Grabber 1d19:6108 media: uvcvideo: Add a quirk for the Kaiweets KTI-W02 infrared camera s390/cpum_sf: Handle CPU hotplug remove during sampling regmap: detach regmap from dev on regmap_exit bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry() scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt scsi: qla2xxx: Supported speed displayed incorrectly for VPorts ocfs2: update seq_file index in ocfs2_dlm_seq_next tracing: Fix cmp_entries_dup() to respect sort() comparison rules HID: wacom: fix when get product name maybe null pointer bpf: Fix exact match conditions in trie_get_next_key() bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie ocfs2: free inode when ocfs2_get_init_inode() fails spi: mpc52xx: Add cancel_work_sync before module remove drm/sti: Add __iomem for mixer_dbg_mxn's parameter gpio: grgpio: Add NULL check in grgpio_probe gpio: grgpio: use a helper variable to store the address of ofdev->dev crypto: x86/aegis128 - access 32-bit arguments as 32-bit x86/asm: Reorder early variables xen: Fix the issue of resource not being properly released in xenbus_dev_probe() xen/xenbus: fix locking xenbus/backend: Protect xenbus callback with lock xenbus/backend: Add memory pressure handler callback xen/xenbus: reference count registered modules netfilter: ipset: Hold module reference while requesting a module igb: Fix potential invalid memory access in igb_init_module() net/qed: allow old cards not supporting "num_images" to work dccp: Fix memory leak in dccp_feat_change_recv net/ipv6: release expired exception dst cached in socket netfilter: x_tables: fix LED ID check in led_tg_check() ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init() can: sun4i_can: sun4i_can_err(): fix {rx,tx}_errors statistics can: sun4i_can: sun4i_can_err(): call can_change_state() even if cf is NULL watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur dm thin: Add missing destroy_work_on_stack() util_macros.h: fix/rework find_closest() macros ftrace: Fix regression with module command in stack_trace_filter ovl: Filter invalid inodes with missing lookup function media: gspca: ov534-ov772x: Fix off-by-one error in set_frame_rate() media: venus: Fix pm_runtime_set_suspended() with runtime pm enabled media: ts2020: fix null-ptr-deref in ts2020_probe() media: i2c: tc358743: Fix crash in the probe error path when using polling btrfs: ref-verify: fix use-after-free after invalid ref action quota: flush quota_release_work upon quota writeback SUNRPC: correct error code comment in xs_tcp_setup_socket() um/sysrq: remove needless variable sp ALSA: hda/realtek: Set PCBeep to default value for ALC274 Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: sh-sci: Clean sci_ports[0] after at earlycon exit ipmr: convert /proc handlers to rcu_read_lock() mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device mfd: intel_soc_pmic_bxtwc: Use dev_err_probe() x86/xen/pvh: Annotate indirect branch as safe CIP: Bump version suffix to -cip116 after merge from stable Mark this as 4.19.324-cip115 release. CIP: Bump version suffix to -cip114 after merge from stable Mark this as 4.19.322-cip113 release. CIP: Bump version suffix to -cip112 after merge from stable CIP: Bump version suffix to -cip111 after merge from stable CIP: Bump version suffix to -cip110 after merge from stable CIP: Bump version suffix to -cip109 after merge from stable CIP: Bump version suffix to -cip108 after merge from stable memory: renesas-rpc-if: Clear HS bit during hardware initialization arm64: dts: renesas: rzg2: Add RPC-IF Support spi: spi-rpc-if: Check return value of rpcif_sw_init() memory: renesas-rpc-if: Remove redundant division of dummy memory: renesas-rpc-if: Simplify single/double data register access memory: renesas-rpc-if: Drop usage of RPCIF_DIRMAP_SIZE macro memory: renesas-rpc-if: Return error in case devm_ioremap_resource() fails memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode memory: renesas-rpc-if: fix possible NULL pointer dereference of resource CIP: Bump version suffix to -cip107 after merge from stable ravb: remove undocumented counter processing ravb: remove undocumented endianness selection ravb: update "undocumented" annotations CIP: Bump version suffix to -cip106 after merge from stable Mark this as 4.19.299-cip105 release. CIP: Bump version suffix to -cip104 after merge from stable CIP: Bump version suffix to -cip103 after merge from stable CIP: Bump version suffix to -cip102 after merge from stable CIP: Bump version suffix to -cip101 after merge from stable CIP: Bump version suffix to -cip100 after merge from stable CIP: Bump version suffix to -cip99 after merge from stable CIP: Bump version suffix to -cip98 after merge from stable CIP: Bump version suffix to -cip97 after merge from stable CIP: Bump version suffix to -cip96 after merge from stable CIP: Bump version suffix to -cip95 after merge from stable CIP: Bump version suffix to -cip94 after merge from stable CIP: Bump version suffix to -cip93 after merge from stable CIP: Bump version suffix to -cip92 after merge from stable CIP: Bump version suffix to -cip91 after merge from stable CIP: Bump version suffix to -cip90 after merge from stable CIP: Bump version suffix to -cip89 after merge from stable CIP: Bump version suffix to -cip88 after merge from stable CIP: Bump version suffix to -cip87 after merge from stable CIP: Bump version suffix to -cip86 after merge from stable CIP: Bump version suffix to -cip85 after merge from stable CIP: Bump version suffix to -cip84 after merge from stable CIP: Bump version suffix to -cip83 after merge from stable CIP: Bump version suffix to -cip82 after merge from stable CIP: Bump version suffix to -cip81 after merge from stable drm: rcar-du: Fix Alpha blending issue on Gen3 CIP: Bump version suffix to -cip80 after merge from stable CIP: Bump version suffix to -cip79 after merge from stable CIP: Bump version suffix to -cip78 after merge from stable CIP: Bump version suffix to -cip77 after merge from stable CIP: Bump version suffix to -cip76 after merge from stable CIP: Bump version suffix to -cip75 after merge from stable CIP: Bump version suffix to -cip74 after merge from stable CIP: Bump version suffix to -cip73 after merge from stable CIP: Bump version suffix to -cip72 after merge from stable CIP: Bump version suffix to -cip71 after merge from stable CIP: Bump version suffix to -cip70 after merge from stable CIP: Bump version suffix to -cip69 after merge from stable CIP: Bump version suffix to -cip68 after merge from stable CIP: Bump version suffix to -cip67 after merge from stable CIP: Bump version suffix to -cip66 after merge from stable CIP: Bump version suffix to -cip65 after merge from stable CIP: Bump version suffix to -cip64 after merge from stable CIP: Bump version suffix to -cip63 after merge from stable CIP: Bump version suffix to -cip62 after merge from stable CIP: Bump version suffix to -cip61 after merge from stable CIP: Bump version suffix to -cip60 after merge from stable CIP: Bump version suffix to -cip59 after merge from stable CIP: Bump version suffix to -cip58 after merge from stable CIP: Bump version suffix to -cip57 after merge from stable CIP: Bump version suffix to -cip56 after merge from stable CIP: Bump version suffix to -cip55 after merge from stable CIP: Bump version suffix to -cip54 after merge from stable CIP: Bump version suffix to -cip53 after merge from stable CIP: Bump version suffix to -cip52 after merge from stable CIP: Bump version suffix to -cip51 after merge from stable CIP: Bump version suffix to -cip50 after merge from stable CIP: Bump version suffix to -cip49 after merge from stable media: i2c: imx219: Balance runtime PM use-count media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream CIP: Bump version suffix to -cip48 after merge from stable drm: rcar-du: Fix crash when using LVDS1 clock for CRTC CIP: Bump version suffix to -cip47 after merge from stable CIP: Bump version suffix to -cip46 after merge from stable arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes media: rcar-csi2: Enable support for R8A774E1 media: dt-bindings: media: renesas,csi2: Add R8A774E1 support media: rcar-vin: Enable support for R8A774E1 media: dt-bindings: media: renesas,vin: Add R8A774E1 support arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support media: rcar-csi2: Enable support for R8A774B1 media: dt-bindings: rcar-csi2: Add R8A774B1 support media: rcar-vin: Enable support for R8A774B1 media: dt-bindings: rcar-vin: Add R8A774B1 support arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes media: rcar-csi2: Enable support for r8a774a1 media: dt-bindings: media: rcar-csi2: Add r8a774a1 support media: rcar-vin: Enable support for r8a774a1 media: dt-bindings: media: rcar_vin: Add r8a774a1 support arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1 media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size media: i2c: imx219: Selection compliance fixes media: i2c: imx219: Fix a bug in imx219_enum_frame_size media: i2c: imx219: Implement get_selection media: i2c: imx219: Add support for cropped 640x480 resolution media: i2c: imx219: Add support for RAW8 bit bayer format media: i2c: imx219: Fix power sequence media: i2c: Add driver for Sony IMX219 sensor media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format media: rcar-vin: Invalidate pipeline if conversion is not possible on input formats media: rcar-csi2: Update V3M and E3 start procedure media: rcar-vin: fix wrong return value in rvin_set_channel_routing() media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab media: v4l2-async: Log message in case of heterogeneous fwnode match media: v4l2-async: Pass notifier pointer to match functions media: v4l2-async: Accept endpoints and devices for fwnode matching media: device property: Add a function to test is a fwnode is a graph endpoint media: ov5645: Remove unneeded regulator_set_voltage() CIP: Bump version suffix to -cip45 after merge from stable CIP: Bump version suffix to -cip44 after merge from stable CIP: Bump version suffix to -cip43 after merge from stable CIP: Bump version suffix to -cip42 after merge from stable CIP: Bump version suffix to -cip41 after merge from stable spi: spi-mem: Make spi_mem_default_supports_op() static inline pinctrl: renesas: r8a77965: Add QSPI[01] pins, groups and functions pinctrl: renesas: r8a7796: Add QSPI[01] pins, groups and functions pinctrl: renesas: r8a77951: Add QSPI[01] pins, groups and functions pinctrl: renesas: r8a77990: Add QSPI[01] pins, groups and functions pinctrl: renesas: r8a77990: Optimize pinctrl image size for R8A774C0 pinctrl: renesas: r8a77965: Optimize pinctrl image size for R8A774B1 pinctrl: renesas: r8a77951: Optimize pinctrl image size for R8A774E1 pinctrl: renesas: r8a7796: Optimize pinctrl image size for R8A774A1 clk: renesas: r8a774c0: Add RPC clocks clk: renesas: r8a774b1: Add RPC clocks clk: renesas: r8a774a1: Add RPC clocks spi: rpc-if: Fix use-after-free on unbind spi: add Renesas RPC-IF driver spi: spi-mem: Fix a memory leak in spi_mem_dirmap_destroy() spi: spi-mem: Fix spi_mem_dirmap_destroy() kerneldoc spi: spi-mem: Add a new API to support direct mapping spi: spi-mem: Compute length only when needed spi: spi-mem: Fix passing zero to 'PTR_ERR' warning spi: spi-mem: fix reference leak in spi_mem_access_start spi: spi-mem: Split spi_mem_exec_op() code spi: spi-mem: export spi_mem_default_supports_op() spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum memory: renesas-rpc-if: Make rpcif_enable/disable_rpm() as static inline memory: renesas-rpc-if: Fix a node reference leak in rpcif_probe() memory: renesas-rpc-if: Fix unbalanced pm_runtime_enable in rpcif_{enable,disable}_rpm memory: renesas-rpc-if: Return correct value to the caller of rpcif_manual_xfer() memory: add Renesas RPC-IF driver dt-bindings: memory: document Renesas RPC-IF bindings dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support dt-bindings: PCI: rcar-pci-host: Document r8a774e1 bindings dt-bindings: PCI: rcar: Add device tree support for r8a774b1 dt-bindings: timer: renesas: tmu: Document r8a774e1 bindings dt-bindings: pci: rcar-pci-ep: Document missing interrupts property CIP: Bump version suffix to -cip40 after merge from stable arm64: dts: renesas: r8a774c0: Fix MSIOF1 DMA channels CIP: Bump version suffix to -cip39 after merge from stable arm64: dts: renesas: r8a774e1: Add audio support arm64: dts: renesas: r8a774e1: Add missing audio_clk_b CIP: Bump version suffix to -cip38 after merge from stable arm64: dts: renesas: r8a774e1: Add USB-DMAC and HSUSB device nodes arm64: dts: renesas: r8a774e1: Add USB3.0 device nodes arm64: dts: renesas: r8a774e1: Add USB2.0 phy and host (EHCI/OHCI) device nodes dt-bindings: dma: renesas,usb-dmac: Add binding for r8a774e1 dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support dt-bindings: sound: renesas, rsnd: Document r8a774e1 bindings arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display arm64: dts: renesas: r8a774e1: Add PWM device nodes dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support arm64: dts: renesas: r8a774e1-hihope-rzg2h: Setup DU clocks arm64: dts: renesas: r8a774e1: Add LVDS device node drm: rcar-du: lvds: Add support for R8A774E1 SoC dt-bindings: display: renesas,lvds: Document r8a774e1 bindings arm64: dts: renesas: r8a774e1: Populate HDMI encoder node dt-bindings: display: renesas,dw-hdmi: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Populate DU device node drm: rcar-du: Add support for R8A774E1 SoC dt-bindings: display: renesas,du: Document r8a774e1 bindings arm64: dts: renesas: r8a774e1: Add FDP1 device nodes arm64: dts: renesas: r8a774e1: Add VSP instances arm64: dts: renesas: r8a774e1: Add FCPF and FCPV instances arm64: dts: renesas: r8a774e1-hihope-rzg2h-ex: Enable sata misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller arm64: dts: renesas: r8a774e1: Add PCIe EP nodes dt-bindings: pci: rcar-pci-ep: Document r8a774e1 arm64: dts: renesas: r8a774e1: Add SATA controller node arm64: dts: renesas: r8a774e1: Add PCIe device nodes misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers arm64: dts: renesas: r8a774b1: Add PCIe EP nodes arm64: dts: renesas: r8a774a1: Add PCIe EP nodes arm64: dts: renesas: r8a774c0: Add PCIe EP node dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1 ata: sata_rcar: Fix DMA boundary mask arm64: dts: renesas: r8a774b1-hihope-rzg2n-ex: Enable sata arm64: dts: renesas: r8a774b1: Add SATA controller node dt-bindings: ata: sata_rcar: Add r8a774b1 support CIP: Bump version suffix to -cip37 after merge from stable misc: pci_endpoint_test: Add Device ID for RZ/G2E PCIe controller arm64: defconfig: Enable R-Car PCIe endpoint driver PCI: rcar: Add endpoint mode support dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller PCI: rcar: Fix calculating mask for PCIEPAMR register PCI: rcar: Move shareable code to a common file arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: Add support to handle multiple base for mapping outbound memory PCI: endpoint: Pass page size as argument to pci_epc_mem_init() PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments PCI: pci-epf-test: Add support to defer core initialization PCI: endpoint: Add notification for core init completion PCI: endpoint: Add core init notifying feature PCI: endpoint: Assign function number for each PF in EPC core PCI: endpoint: Protect concurrent access to pci_epf_ops with mutex PCI: endpoint: Replace spinlock with mutex PCI: endpoint: Use notification chain mechanism to notify EPC events to EPF tools: PCI: Fix fd leakage tools: PCI: Exit with error code when test fails PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix clearing start entry in configfs PCI: endpoint: Cast the page number to phys_addr_t PCI: endpoint: Clear BAR before freeing its space PCI: endpoint: Skip odd BAR when skipping 64bit BAR PCI: endpoint: Allocate enough space for fixed size BAR PCI: endpoint: Set endpoint controller pointer to NULL PCI: endpoint: Add support to specify alignment for buffers allocated to BARs PCI: endpoint: Fix a potential NULL pointer dereference PCI: endpoint: Remove features member in struct pci_epc PCI: designware-plat: Remove setting epc->features in Designware plat EP driver PCI: rockchip: Remove pci_epf_linkup() from Rockchip EP driver PCI: cadence: Remove pci_epf_linkup() from Cadence EP driver PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features PCI: pci-epf-test: Do not allocate next BARs memory if current BAR is 64Bit PCI: pci-epf-test: Remove setting epf_bar flags in function driver PCI: endpoint: Fix pci_epf_alloc_space() to set correct MEM TYPE flags PCI: endpoint: Add helper to get first unreserved BAR PCI: cadence: Populate ->get_features() cdns_pcie_epc_ops PCI: rockchip: Populate ->get_features() dw_pcie_ep_ops PCI: pci-dra7xx: Populate ->get_features() dw_pcie_ep_ops PCI: designware-plat: Populate ->get_features() dw_pcie_ep_ops PCI: dwc: Add ->get_features() callback function to dw_pcie_ep_ops PCI: endpoint: Add new pci_epc_ops to get EPC features CIP: Bump version suffix to -cip36 after merge from stable with ravb fix Revert "ravb: Fixed to be able to unload modules" CIP: Bump version suffix to -cip35 after merge from stable CIP: Bump version suffix to -cip34 after merge from stable arm64: dts: renesas: Fix SD Card/eMMC interface device node names arm64: dts: renesas: r8a774e1: Add RWDT node dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support arm64: dts: renesas: r8a774e1: Add MSIOF nodes spi: renesas,sh-msiof: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support dt-bindings: i2c: renesas,iic: Document r8a774e1 support dt-bindings: i2c: renesas,i2c: Document r8a774e1 support arm64: dts: renesas: r8a774e1: Add SDHI nodes mmc: renesas_sdhi_internal_dmac: Add r8a774e1 support arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774e1: Add CAN[FD] support can: rcar_can: Remove unused platform data support arm64: dts: renesas: r8a774e1: Add TMU device nodes arm64: dts: renesas: r8a774e1: Add CMT device nodes arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/rcar_gen3: Fix undefined temperature if negative thermal: rcar_gen3_thermal: Generate interrupt when temperature changes thermal: rcar_gen3_thermal: Remove temperature bound arm64: dts: renesas: r8a774e1: Add operating points arm64: dts: renesas: r8a774e1: Add Ethernet AVB node arm64: dts: renesas: r8a774e1: Add GPIO device nodes arm64: dts: renesas: r8a774e1: Add SYS-DMAC device nodes dt-bindings: dma: renesas,rcar-dmac: Document R8A774E1 bindings arm64: dts: renesas: r8a774e1: Add IPMMU device nodes iommu/ipmmu-vmsa: Hook up R8A774E1 DT matching code dt-bindings: iommu: renesas,ipmmu-vmsa: Add r8a774e1 support arm64: dts: renesas: Add HiHope RZ/G2H sub board support arm64: dts: renesas: Add HiHope RZ/G2H main board support dt-bindings: arm: renesas: Add HopeRun RZ/G2H boards arm64: dts: renesas: Initial r8a774e1 SoC device tree pinctrl: sh-pfc: pfc-r8a77951: Add R8A774E1 PFC support dt-bindings: pinctrl: sh-pfc: Document r8a774e1 PFC support pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: sh-pfc: pfc-r8a7795: Fix typo in pinmux macro for SCL3 pinctrl: sh-pfc: pfc-r8a7795-es1: Fix typo in pinmux macro for SCL3 pinctrl: sh-pfc: r8a7795: Use new macros for non-GPIO pins pinctrl: sh-pfc: r8a7795-es1: Use new macros for non-GPIO pins pinctrl: sh-pfc: r8a7795: Add TPU pins, groups and functions pinctrl: sh-pfc: r8a7795-es1: Add TPU pins, groups and functions pinctrl: sh-pfc: rcar-gen3: Rename RTS{0,1,3,4}# pin function definitions pinctrl: sh-pfc: rcar-gen3: Retain TDSELCTRL register across suspend/resume pinctrl: sh-pfc: r8a7795: Deduplicate VIN5 pin definitions pinctrl: sh-pfc: r8a7795: Add I2C{0,3,5} pins, groups and functions pinctrl: sh-pfc: r8a7795-es1: Add I2C{0,3,5} pins, groups and functions pinctrl: sh-pfc: r8a7795: Fix VIN versioned groups pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias control arm64: defconfig: Enable R8A774E1 SoC clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: renesas: rzg2: Mark RWDT clocks as critical clk: renesas: cpg-mssr: Mark clocks as critical only if on at boot clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks clk: renesas: Add r8a774e1 CPG Core Clock Definitions clk: renesas: rcar-gen3: Add RPC clocks soc: renesas: rcar-rst: Add support for RZ/G2H dt-bindings: reset: rcar-rst: Document r8a774e1 reset module soc: renesas: Identify RZ/G2H dt-bindings: arm: renesas: Document RZ/G2H SoC DT bindings soc: renesas: Add Renesas R8A774E1 config option soc: renesas: rcar-sysc: Add r8a774e1 support dt-bindings: power: renesas,rcar-sysc: Document r8a774e1 SYSC binding dt-bindings: power: Add r8a774e1 SYSC power domain definitions arm64: dts: renesas: r8a774a1: Remove audio port node arm64: dts: renesas: Add HiHope RZ/G2N Rev2.0/3.0/4.0 board with idk-1110wr display arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 sub board support arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 main board support arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 board with idk-1110wr display arm64: dts: renesas: hihope-rzg2-ex: Separate out lvds specific nodes into common file arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 sub board support arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 main board support arm64: dts: renesas: Add HiHope RZ/G2M[N] Rev.3.0/4.0 specific into common file arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-rev2.dtsi file arm64: dts: renesas: r8a774b1-hihope-rzg2n[-ex]: Rename HiHope RZ/G2N boards arm64: dts: renesas: r8a774a1-hihope-rzg2m[-ex/-ex-idk-1110wr]: Rename HiHope RZ/G2M boards CIP: Bump version suffix to -cip33 after merge from stable drm: atomic helper: fix W=1 warnings drm: Add drm_atomic_get_old/new_private_obj_state drm: of: Fix linking when CONFIG_OF is not set CIP: Bump version suffix to -cip32 after merge from stable drm: of: Fix double-free bug CIP: Bump version suffix to -cip31 after merge from stable arm64: dts: renesas: Add EK874 board with idk-2121wr display support dt-bindings: display: Add idk-2121wr binding arm64: dts: renesas: rzg2: Add reset control properties for display arm64: dts: renesas: r8a774c0: Point LVDS0 to its companion LVDS1 drm: rcar-du: lvds: Allow for even and odd pixels swap drm: rcar-du: lvds: Get dual link configuration from DT drm: of: Add drm_of_lvds_get_dual_link_pixel_order drm: rcar-du: lvds: Improve identification of panels drm: rcar-du: lvds: Get mode from state drm: Add atomic variants for bridge enable/disable drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers drm: rcar_lvds: Fix dual link mode operations drm: rcar-du: Skip LVDS1 output on Gen3 when using dual-link LVDS mode drm: rcar-du: lvds: Add support for dual-link mode dt-bindings: display: renesas: lvds: Add renesas,companion property drm: bridge: Add dual_link field to the drm_bridge_timings structure drm: rcar-du: lvds: Remove LVDS double-enable checks arm64: defconfig: Enable additional support for Renesas platforms ASoC: rsnd: fixup SSI clock during suspend/resume modes CIP: Bump version suffix to -cip30 after merge from stable CIP: Bump version suffix to -cip29 after merge from stable CIP: Bump version suffix to -cip28 after merge from stable CIP: Bump version suffix to -cip27 after merge from stable CIP: Bump version suffix to -cip26 after merge from stable CIP: Bump version suffix to -cip25 after merge from stable arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display dt-bindings: display: Add idk-1110wr binding CIP: Bump version suffix to -cip24 after merge from stable CIP: Bump version suffix to -cip23 after merge from stable CIP: Bump version suffix to -cip22 after merge from stable CIP: Bump version suffix to -cip21 after merge from stable arm64: dts: renesas: cat874: Enable usb role switch support arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node usb: gadget: udc: renesas_usb3: Enhance role switch support usb: typec: fix an IS_ERR() vs NULL bug in hd3ss3220_probe() usb: typec: hd3ss3220: hd3ss3220_probe() warn: passing zero to 'PTR_ERR' usb: typec: add dependency for TYPEC_HD3SS3220 usb: typec: hd3ss3220_irq() can be static usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller dt-bindings: usb: renesas_usb3: Document usb role switch support dt-bindings: usb: hd3ss3220 device tree binding document usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h device connection: Find connections also by checking the references device property: Introduce fwnode_find_reference() device connection: Find device connections also from device graphs device connection: Prepare support for firmware described connections usb: typec: Find the ports by also matching against the device node usb: roles: Find the muxes by also matching against the device node usb: typec: mux: Fix unsigned comparison with less than zero usb: typec: mux: Find the muxes by also matching against the device node device connection: Add fwnode member to struct device_connection CIP: Bump version suffix to -cip20 after merge from stable arm64: dts: renesas: r8a774b1: Add USB3.0 device nodes arm64: dts: renesas: r8a774b1: Add USB-DMAC and HSUSB device nodes arm64: dts: renesas: r8a774b1: Add USB2.0 phy and host (EHCI/OHCI) device nodes dt-bindings: usb: renesas_usb3: Document r8a774b1 support dt-bindings: usb: renesas_gen3: Rename bindings documentation file to reflect IP block dt-bindings: usb-xhci: Add r8a774b1 support dt-bindings: rcar-gen3-phy-usb3: Add r8a774b1 support dt-bindings: usb: renesas_usbhs: Add r8a774b1 support dt-bindings: usb: renesas_usbhs: Rename bindings documentation file dt-bindings: dmaengine: usb-dmac: Add binding for r8a774b1 dt-bindings: rcar-gen3-phy-usb2: Add r8a774b1 support arm64: dts: renesas: r8a774b1: Add Sound and Audio DMAC device nodes ASoC: rsnd: Document r8a774b1 bindings arm64: dts: renesas: r8a774a1: Remove audio port node arm64: dts: renesas: Add support for Advantech idk-1110wr LVDS panel arm64: dts: renesas: hihope-rzg2-ex: Add LVDS support drm: rcar-du: lvds: Add r8a774b1 support arm64: dts: renesas: hihope-rzg2-ex: Enable backlight arm64: dts: renesas: r8a774b1: Add PWM device nodes arm64: dts: renesas: r8a774b1: Add FDP1 device nodes arm64: dts: renesas: r8a774b1-hihope-rzg2n: Add display clock properties arm64: dts: renesas: r8a774b1: Add HDMI encoder instance arm64: dts: renesas: r8a774b1: Add DU device to DT drm: rcar-du: Add R8A774B1 support arm64: dts: renesas: hihope-common: Move du clk properties out of common dtsi arm64: dts: renesas: r8a774b1: Connect Ethernet-AVB to IPMMU-DS0 arm64: dts: renesas: r8a774b1: Tie SYS-DMAC to IPMMU-DS0/1 arm64: dts: renesas: r8a774b1: Add VSP instances arm64: dts: renesas: r8a774b1: Add FCPF and FCPV instances arm64: dts: renesas: r8a774b1: Add IPMMU device nodes iommu/ipmmu-vmsa: Hook up r8a774b1 DT matching code dt-bindings: iommu: ipmmu-vmsa: Add r8a774b1 support arm64: dts: renesas: r8a774b1: Add CAN and CAN FD support dt-bindings: can: rcar_canfd: document r8a774b1 support dt-bindings: can: rcar_can: document r8a774b1 support arm64: dts: renesas: r8a774b1: Add TMU device nodes clk: renesas: r8a774b1: Add TMU clock dt-bindings: timer: renesas: tmu: Document r8a774b1 bindings arm64: dts: renesas: r8a774b1: Add CMT device nodes dt-bindings: timer: renesas, cmt: Document r8a774b1 CMT support arm64: dts: renesas: r8a774b1: Add RZ/G2N thermal support thermal: rcar_gen3_thermal: Add r8a774b1 support dt-bindings: thermal: rcar-gen3-thermal: Add r8a774b1 support arm64: dts: renesas: r8a774b1: Add OPPs table for cpu devices arm64: dts: renesas: r8a774b1: Add I2C and IIC-DVFS support dt-bindings: i2c: sh_mobile: Add r8a774b1 support dt-bindings: i2c: sh_mobile: Rename bindings documentation file dt-bindings: i2c: rcar: Add r8a774b1 support dt-bindings: i2c: rcar: Rename bindings documentation file arm64: dts: renesas: r8a774b1-hihope-rzg2n: Enable HS400 mode arm64: dts: renesas: r8a774b1: Add SDHI support mmc: renesas_sdhi_internal_dmac: Add r8a774b1 support dt-bindings: mmc: renesas_sdhi: Add r8a774b1 support arm64: dts: renesas: r8a774b1: Add INTC-EX device node arm64: dts: renesas: hihope-rzg2-ex: Let the board specific DT decide about pciec1 arm64: dts: renesas: r8a774b1: Add PCIe device nodes arm64: dts: renesas: r8a774b1: Add all MSIOF nodes arm64: dts: renesas: r8a774b1: Add RWDT node dt-bindings: watchdog: renesas-wdt: Document r8a774b1 support dt-bindings: watchdog: Rename bindings documentation file dt-bindings: spi: sh-msiof: Add r8a774b1 support arm64: dts: renesas: Add HiHope RZ/G2N sub board support arm64: dts: renesas: r8a774b1: Add Ethernet AVB node dt-bindings: net: ravb: Add support for r8a774b1 SoC arm64: dts: renesas: r8a774b1: Add GPIO device nodes dt-bindings: gpio: rcar: Add DT binding for r8a774b1 arm64: dts: renesas: r8a774b1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774b1: Add SYS-DMAC device nodes dt-bindings: dmaengine: rcar-dmac: Document R8A774B1 bindings CIP: Bump version suffix to -cip19 after merge from stable arm64: dts: renesas: r8a774c0: cat874: Sort nodes arm64: dts: renesas: Use ip=on for bootargs arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V regulator arm64: dts: renesas: Update 'vsps' properties for readability arm64: dts: renesas: r8a774c0: Fix register range of display node arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01] arm64: dts: renesas: r8a774c0: Clean up CPU compatibles arm64: dts: renesas: r8a774c0: Add dynamic power coefficient arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM] dt-bindings: can: rcar_can: document r8a77965 support CIP: Bump version suffix to -cip18 after merge from stable CIP: Bump version suffix to -cip17 after merge from stable arm64: defconfig: Enable R8A774B1 SoC arm64: dts: renesas: Add HiHope RZ/G2N main board support arm64: dts: renesas: Initial r8a774b1 SoC device tree dt-bindings: serial: sh-sci: Document r8a774b1 bindings pinctrl: sh-pfc: pfc-r8a77965: Fix typo in pinmux macro for SCL3 pinctrl: sh-pfc: r8a77965: Add R8A774B1 PFC support dt-bindings: pinctrl: sh-pfc: Document r8a774b1 PFC support pinctrl: sh-pfc: r8a77965: Use new macros for non-GPIO pins pinctrl: sh-pfc: r8a77965: Add TPU pins, groups and functions pinctrl: sh-pfc: r8a77965: Add I2C{0,3,5} pins, groups and functions pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3 pinctrl: sh-pfc: r8a77965: Add CAN FD pins, groups and functions pinctrl: sh-pfc: r8a77965: Add CAN pins, groups and functions pinctrl: sh-pfc: r8a77965: Add VIN[4|5] groups/functions pinctrl: sh-pfc: r8a77965: Add Audio SSI pin support pinctrl: sh-pfc: r8a77965: Add Audio clock pin support pinctrl: sh-pfc: r8a77965: Add SATA pins, groups and functions clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding dt-bindings: clk: Add r8a774b1 CPG Core Clock Definitions soc: renesas: rcar-rst: Add support for RZ/G2N dt-bindings: reset: rcar-rst: Document r8a774b1 reset module soc: renesas: rcar-sysc: Add r8a774b1 support soc: renesas: r8a774c0-sysc: Fix power request conflicts soc: renesas: r8a77990-sysc: Fix power request conflicts soc: renesas: r8a77980-sysc: Fix power request conflicts soc: renesas: r8a77970-sysc: Fix power request conflicts soc: renesas: r8a77965-sysc: Fix power request conflicts soc: renesas: r8a7796-sysc: Fix power request conflicts soc: renesas: r8a7795-sysc: Fix power request conflicts soc: renesas: rcar-sysc: Prepare for fixing power request conflicts dt-bindings: power: rcar-sysc: Document r8a774b1 sysc dt-bindings: power: Add r8a774b1 SYSC power domain definitions soc: renesas: Identify RZ/G2N soc: renesas: Add Renesas R8A774B1 config option dt-bindings: arm: renesas: Add HopeRun RZ/G2N boards dt-bindings: arm: renesas: Document RZ/G2N SoC DT bindings CIP: Bump version suffix to -cip16 after merge from stable CIP: Bump version suffix to -cip15 after merge from stable gitlab-ci: Use external linux-cip-pipelines repository to define CI arm64: dts: renesas: r8a774a1: Add SSIU support for sound ASoC: rsnd: add SSIU BUSIF support ASoC: rsnd: add .get_id/.get_id_sub ASoC: rsnd: move .get_status under rsnd_mod_ops ASoC: rsnd: merge .nolock_start and .prepare ASoC: rsnd: ssiu: Support to init different BUSIF instance ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0 ASoc: rsnd: dma: Calculate PDMACHCRE with consider of BUSIF ASoc: rsnd: dma: Calculate dma address with consider of BUSIF ASoC: rsnd: ssi: Check runtime channel number rather than hw_params ASoC: rsnd: ssi: Fix issue in dma data address assignment ASoC: rsnd: remove is_play parameter from hw_rule function ASoC: rsnd: add support for 8 bit S8 format ASoC: rsnd: add support for 16/24 bit slot widths ASoC: rsnd: add warning message to rsnd_kctrl_accept_runtime() CIP: Bump version suffix to -cip14 after merge from stable gitlab-ci: Remove test timeout gitlab-ci: Remove unofficial build configurations gitlab-ci: Split tests into separate jobs CIP: Bump version suffix to -cip13 after merge from stable arm64: dts: renesas: hihope-rzg2-ex: Enable CAN interfaces arm64: dts: renesas: r8a774a1: Add CANFD support arm64: dts: renesas: r8a774a1: Add missing assigned-clocks for CAN[01] dt-bindings: can: rcar_canfd: document r8a774a1 support arm64: dts: renesas: hihope-common: Add HDMI audio support arm64: dts: renesas: r8a774a1: Use extended audio dmac registers arm64: dts: renesas: cat874: Add BT support arm64: dts: renesas: cat874: Add WLAN support arm64: dts: renesas: hihope-common: Add WLAN support arm64: dts: renesas: hihope-common: Add BT support arm64: dts: renesas: hihope-common: Add PCA9654 I/O expander CIP: Bump version suffix to -cip12 after merge from stable arm64: dts: renesas: r8a774c0: Add CANFD support dt-bindings: can: rcar_canfd: document r8a774c0 support arm64: dts: renesas: cat874: Add HDMI audio arm64: dts: renesas: cat874: Add HDMI video support arm64: defconfig: Enable TDA19988 arm64: dts: renesas: r8a774c0: Add display output support media: use strscpy() instead of strlcpy() drm: rcar-du: Replace EXT_CTRL_REGS feature flag with generation check drm: rcar-du: Disable unused DPAD outputs drm/rcar-du: Use drm_fbdev_generic_setup() drm: rcar-du: Reject modes that fail CRTC timing requirements drm: rcar-du: Fix external clock error checks drm: rcar-du: Fix vblank initialization drm: rcar-du: Fix the return value in case of error in 'rcar_du_crtc_set_crc_source()' drm/rcar-du: Replace drm_dev_unref with drm_dev_put drm: rcar-du: Enable configurable DPAD0 routing on Gen3 drm: rcar-du: Improve non-DPLL clock selection drm: rcar-du: lvds: Adjust operating frequency for D3 and E3 drm: rcar-du: lvds: Fix post-DLL divider calculation drm: rcar-du: Turn LVDS clock output on/off for DPAD0 output on D3/E3 drm: rcar-du: lvds: Add API to enable/disable clock output drm: rcar-du: lvds: Don't fail probe if output is not connected on D3/E3 drm: rcar-du: Simplify encoder registration drm: rcar-du: Move CRTC outputs bitmask to private CRTC state drm: rcar-du: lvds: add R8A774C0 support drm: rcar-du: Add r8a774c0 device support drm: rcar-du: Use LVDS PLL clock as dot clock when possible drm: rcar-du: Perform the initial CRTC setup from rcar_du_crtc_get() drm: rcar-du: lvds: D3/E3 support dt-bindings: display: renesas: lvds: Document r8a774c0 bindings dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocks dt-bindings: display: renesas: du: Document r8a774c0 bindings media: dt-bindings: media: renesas-fcp: Add RZ/G2 support media: vsp1: Add RZ/G support CIP: Bump version suffix to -cip11 after merge from stable gitlab-ci: Always store job artifacts gitlab-ci: Increase test timeout to 60 minutes arm64: dts: renesas: hihope-common: Add HDMI support arm64: dts: renesas: r8a774a1: Add HDMI encoder instance arm64: dts: renesas: r8a774a1: Connect Ethernet-AVB to IPMMU-DS0 arm64: dts: renesas: r8a774a1: Tie Audio-DMAC to IPMMU-MP arm64: dts: renesas: r8a774a1: Tie SYS-DMAC to IPMMU-DS0/1 arm64: dts: renesas: r8a774a1: Add FDP1 instance arm64: dts: renesas: r8a774a1: Add DU device to DT arm64: dts: renesas: r8a774a1: Add VSP instances arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support arm64: dts: renesas: hihope-common: Declare pcie bus clock arm64: dts: renesas: r8a774a1: Add PCIe device nodes drm: rcar-du: Update framebuffer pitch and alignment limits for Gen3 drm: rcar-du: Store V4L2 fourcc in rcar_du_format_info structure drm: rcar-du: Add support for missing pixel formats drm: rcar-du: Rename and document dpll_ch field drm: rcar-du: Rework clock configuration based on hardware limits drm: rcar-du: Support interlaced video output through vsp1 drm: rcar-du: Don't use TV sync mode when not supported by the hardware drm: rcar-du: Cache DSYSR value to ensure known initial value drm: rcar-du: Add interlaced feature flag drm: rcar-du: Refactor Feature and Quirk definitions drm: rcar-du: dw-hdmi: Reject modes with a too high clock frequency drm: rcar-du: lvds: Add r8a774a1 support drm: rcar-du: Add R8A774A1 support PCI: rcar: Do not shadow the 'irq' variable PCI: rcar: Clean up debug messages PCI: rcar: Replace various variable types with unsigned ones for register values PCI: rcar: Replace unsigned long with u32/unsigned int in register accessors dt-bindings: display: renesas: Add r8a774a1 support dt-bindings: display: renesas: lvds: Document r8a774a1 bindings dt-bindings: display: renesas: du: Document the r8a774a1 bindings dt-bindings: PCI: rcar: Add device tree support for r8a774a1 CIP: Bump version suffix to -cip10 after merge from stable arm64: dts: renesas: hihope-common: Enable USB3.0 arm64: dts: renesas: hihope-common: Add USB 2.0 support arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks phy: renesas: rcar-gen3-usb2: fix imbalance powered flag arm64: dts: renesas: hihope-common: Remove "label" from LEDs arm64: dts: renesas: hihope-common: Add LEDs support arm64: dts: renesas: hihope-common: Add uSD and eMMC mmc: renesas_sdhi: prevent overflow for max_req_size mmc: tmio: introduce macro for max block size mmc: renesas_sdhi: Change HW adjustment register according to speed mode arm64: dts: renesas: r8a774a1: Add dynamic power coefficient arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC arm64: dts: renesas: r8a774a1: Add operating points thermal: rcar_gen3_thermal: Update temperature conversion method thermal: rcar_gen3_thermal: Update calculation formula of IRQTEMP thermal: rcar_gen3_thermal: Update value of Tj_1 thermal: rcar_gen3_thermal: Fix to show correct trip points number thermal: rcar_gen3_thermal: fix interrupt type thermal: rcar_gen3_thermal: Fix init value of IRQCTL register thermal: rcar_gen3_thermal: Register hwmon sysfs interface arm64: dts: renesas: r8a774a1: Add TMU device nodes clk: renesas: r8a774a1: Add TMU clock arm64: dts: renesas: r8a774a1: Add CMT device nodes arm64: dts: renesas: hihope-common: Add RWDT support watchdog: renesas_wdt: Add a few cycles delay watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly watchdog: renesas_wdt: drop superfluous glob pattern watchdog: renesas_wdt: don't keep timer value during suspend/resume watchdog: renesas_wdt: Fix typos watchdog: renesas_wdt: stop when unregistering arm64: dts: renesas: Add HiHope RZ/G2M sub board support arm64: dts: renesas: hihope-common: Add pincontrol support to scif2/scif clock arm64: dts: renesas: Add HiHope RZ/G2M main board support dt-bindings: Add vendor prefix for HopeRun dt-bindings: arm: renesas: Add HopeRun RZ/G2[M] boards gitlab-ci: Start testing the r8a774a1-hihope-rzg2m-ex device arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string arm64: dts: renesas: r8a774a1: Fix hsusb reg size arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Replace clock magic numbers arm64: dts: renesas: r8a774a1: Replace power magic numbers arm64: dts: renesas: r8a774a1: Add CAN nodes arm64: dts: renesas: Remove unneeded status from thermal nodes arm64: dts: renesas: Fix whitespace around assignments arm64: dts: renesas: r8a774a1: Add USB3.0 device nodes arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB device nodes arm64: dts: renesas: r8a774a1: Add USB2.0 phy and host(EHCI/OHCI) device nodes arm64: dts: renesas: r8a774a1: Add FCPF and FCPV instances arm64: dts: renesas: r8a774a1: Add audio support arm64: dts: renesas: r8a774a1: Add PWM device nodes arm64: dts: renesas: r8a774a1: Add Cortex-A53 CPU cores arm64: dts: renesas: r8a774a1: Add all MSIOF nodes arm64: dts: renesas: r8a774a1: Add IPMMU device nodes arm64: dts: renesas: r8a774a1: Add RZ/G2M thermal support arm64: dts: renesas: r8a774a1: Add I2C and IIC-DVFS support arm64: dts: renesas: r8a774a1: Add SDHI nodes arm64: dts: renesas: r8a774a1: Add GPIO device nodes arm64: dts: renesas: r8a774a1: Add pinctrl device node arm64: dts: renesas: r8a774a1: Add RWDT node arm64: dts: renesas: r8a774a1: Add Ethernet AVB node arm64: dts: renesas: r8a774a1: Add INTC-EX device node arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774a1: Add SYS-DMAC controller nodes arm64: dts: renesas: Initial r8a774a1 SoC device tree mmc: renesas_sdhi_internal_dmac: set scatter/gather max segment size ravb: Avoid unsupported internal delay mode for R-Car E3/D3 ravb: remove tx buffer addr 4byte alilgnment restriction for R-Car Gen3 spi: sh-msiof: fix deferred probing dmaengine: rcar-dmac: Update copyright information dmaengine: rcar-dmac: set scatter/gather max segment size serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete() serial: sh-sci: Extract sci_dma_rx_reenable_irq() serial: sh-sci: Extract sci_dma_rx_chan_invalidate() serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback soc: renesas: rcar-sysc: Fix power domain control after system resume soc: renesas: rcar-sysc: Merge PM Domain registration and linking soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers clk: renesas: cpg-mssr: Remove error messages on out-of-memory conditions clk: renesas: cpg-mssr: Use genpd of_node instead of local copy gpio: rcar: Pedantic formatting gpio: rcar: select General Output Register to set output states gpio: rcar: reference device instead of platform device thermal: rcar_gen3_thermal: Add r8a774a1 support dt-bindings: dmaengine: usb-dmac: Add binding for r8a774a1 dt-bindings: thermal: rcar-gen3-thermal: Add r8a774a1 support dt-bindings: usb: renesas_usbhs: Add r8a774a1 support dt-bindings: usb-xhci: Add r8a774c0 support dt-bindings: usb-xhci: Add r8a774a1 support dt-bindings: rcar-gen3-phy-usb3: Add r8a774a1 support dt-bindings: can: rcar_can: Add r8a774c0 support dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks dt-bindings: can: rcar_can: Add r8a774a1 support pinctrl: sh-pfc: sh73a0: Use new macros for non-GPIO pins pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: r8a7791: Fix VIN1 versioned groups pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group pinctrl: sh-pfc: r8a77995: Remove unused PINMUX_IPSR_{MSEL2,PHYS}() pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group pinctrl: sh-pfc: r8a7796: Remove placeholder I2C pin data pinctrl: sh-pfc: r8a7796: Use new macros for non-GPIO pins pinctrl: sh-pfc: r8a7796: Add TPU pins, groups and functions pinctrl: sh-pfc: r8a77990: Use new macros for non-GPIO pins pinctrl: sh-pfc: Move PIN_NONE to shared header file pinctrl: sh-pfc: Add PORT_GP_27 helper macro pinctrl: sh-pfc: rcar-gen3: Rename SEL_NDFC to SEL_NDF pinctrl: sh-pfc: rcar-gen3: Rename RTS{0,1,3,4}# pin function definitions pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit30 when using SSI_SCK2 and SSI_WS2 pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit31 when using SIM0_D pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit16 when using NFALE and NFRB_N pinctrl: sh-pfc: rcar-gen3: Rename SEL_ADG_{A,B,C} to SEL_ADG{A,B,C} pinctrl: sh-pfc: rcar-gen3: Remove CC5_OSCOUT pin pinctrl: sh-pfc: rcar-gen3: Remove HDMI CEC pins, groups, and functions pinctrl: sh-pfc: Add missing #include <linux/errno.h> pinctrl: sh-pfc: rcar-gen3: Retain TDSELCTRL register across suspend/resume pinctrl: sh-pfc: r8a77990: Move CANFD pin groups and functions pinctrl: sh-pfc: r8a77990: Rename IOCTRLx registers pinctrl: sh-pfc: r8a7796: Move CANFD pin groups and functions pinctrl: sh-pfc: r8a7796: Deduplicate VIN5 pin definitions pinctrl: sh-pfc: r8a7796: Add I2C{0,3,5} pins, groups and functions pinctrl: sh-pfc: r8a7796: Fix VIN versioned groups pinctrl: sh-pfc: Validate pin tables at runtime pinctrl: sh-pfc: Add check for empty pinmux groups/functions pinctrl: sh-pfc: Mark run-time debug code __init pinctrl: sh-pfc: Correct printk level of group reference warning pinctrl: sh-pfc: Add new non-GPIO helper macros pinctrl: sh-pfc: Add SH_PFC_PIN_CFG_PULL_UP_DOWN shorthand pinctrl: sh-pfc: Rename 2-parameter CPU_ALL_PORT() variant pinctrl: sh-pfc: Improve PINMUX_IPSR_PHYS() documentation pinctrl: sh-pfc: Validate enum IDs for regs with variable-width fields pinctrl: sh-pfc: Validate enum IDs for regs with fixed-width fields pinctrl: sh-pfc: Absorb enum IDs in PINMUX_DATA_REG() macro pinctrl: sh-pfc: Absorb enum IDs in PINMUX_CFG_REG_VAR() macro pinctrl: sh-pfc: Absorb enum IDs in PINMUX_CFG_REG() macro pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length pinctrl: sh-pfc: Validate pins/marks in pin groups at build time pinctrl: sh-pfc: Add physical pin multiplexing helper macros pinctrl: sh-pfc: Validate pinmux tables at runtime when debugging pinctrl: sh-pfc: Print actual field width for variable-width fields CIP: Bump version suffix to -cip9 after merge from stable staging: m57621-mmc: delete driver from the tree. CIP: Bump version suffix to -cip8 after merge from stable Update to run all CIP arm, arm64 and x86 configs Update CI to use the latest linux-cip-ci containers CIP: Bump version suffix to -cip7 after merge from stable arm64: dts: renesas: r8a774c0: sort subnodes of the soc node arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2 arm64: dts: renesas: r8a774c0-cat874: Add RWDT support arm64: dts: renesas: r8a774c0-cat874: Add LEDs support arm64: dts: renesas: r8a774c0-cat874: add RTC support arm64: defconfig: enable RX-8581 config option rtc: rx8581: Add support for Epson rx8571 RTC dt-bindings: rtc: add rx8571 compatible rtc: nvmem: remove nvmem from struct rtc_device rtc: nvmem: use devm_nvmem_register() arm64: dts: renesas: cat874: Add USB-HOST support phy: renesas: rcar-gen3-usb2: enable/disable independent irqs phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg() phy: rcar-gen3-usb2: Add support for r8a77470 phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure phy: renesas: rcar-gen3-usb2: add is_otg_channel to use "role" sysfs phy: renesas: rcar-gen3-usb2: change a condition "dr_mode" phy: renesas: rcar-gen3-usb2: add conditions for uses_otg_pins == false phy: renesas: rcar-gen3-usb2: unify OBINTEN handling phy: renesas: rcar-gen3-usb2: Check a property to use otg pins phy: renesas: rcar-gen3-usb2: Rename has_otg_pins to uses_otg_pins phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfs arm64: dts: renesas: cat875: Add CAN support arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes arm64: dts: renesas: r8a774c0: Add CAN nodes arm64: dts: renesas: r8a774c0: Fix cpu nodes style arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLK clk: renesas: rcar-gen3: Add spinlock clk: renesas: rcar-gen3: Factor out cpg_reg_modify() clk: renesas: r8a774a1: Add missing CANFD clock clk: renesas: Remove usage of CLK_IS_BASIC clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a774a1: Add CPEX clock CIP: Bump version suffix to -cip6 after merge from stable Add gitlab-ci.yaml CIP: Bump version suffix to -cip5 after merge from stable CIP: Bump version suffix to -cip4 after merge from stable CIP: Bump version suffix to -cip3 after merge from stable dt-bindings: Add vendor prefix for Silicon Linux. CIP: Bump version suffix to -cip2 after Renesas patches arm64: defconfig: Enable R-Car thermal driver arm64: dts: renesas: r8a774c0: Add thermal support dt-bindings: thermal: rcar-thermal: add R8A774C0 support thermal: rcar_thermal: add R8A774C0 support arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU arm64: dts: renesas: r8a774c0: Add PWM support dt-bindings: pwm: rcar: Add r8a774c0 support dt-bindings: pwm: rcar: Add r8a774a1 support arm64: dts: renesas: r8a774c0: Add audio support ASoC: rsnd: Add r8a774c0 support ASoC: rsnd: Add r8a774a1 support arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes media: dt-bindings: rcar-csi2: Add r8a774c0 media: dt-bindings: rcar-vin: Add R8A774C0 support media: rcar-csi2: Add support for RZ/G2E media: rcar-csi2: Fix PHTW table values for E3/V3M media: rcar-csi2: Handle per-SoC number of channels media: rcar: rcar-csi2: Update V3M/E3 PHTW tables media: rcar-csi2: Add R8A77990 support media: rcar-vin: Add support for RZ/G2E media: rcar-vin: Add support for R-Car R8A77990 arm64: dts: renesas: r8a774c0: Add IPMMU device nodes dt-bindings: iommu: ipmmu-vmsa: Add r8a774c0 support dt-bindings: iommu: ipmmu-vmsa: Add r8a774a1 support iommu/ipmmu-vmsa: Hook up r8a774c0 DT matching code iommu/ipmmu-vmsa: Modify ipmmu_slave_whitelist() to check SoC revisions iommu/ipmmu-vmsa: Hook up R8A774A1 DT maching code arm64: dts: renesas: r8a774c0: Add USB3.0 device nodes usb: gadget: udc: renesas_usb3: Add bindings for r8a774c0 usb: gadget: udc: renesas_usb3: Add r8a774a1 support usb: gadget: udc: renesas_usb3: add support for r8a774c0 usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device usb: gadget: udc: renesas_usb3: add support for r8a77990 arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodes dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 dt-bindings: usb: renesas_usbhs: Add r8a774c0 support dt-bindings: usb: renesas_usbhs: add clock-names property Revert "usb: renesas_usbhs: add extcon notifier to set mode for non-otg channel" usb: renesas_usbhs: Add multiple clocks management usb: renesas_usbhs: Add reset_control usb: renesas_usbhs: add support for RZ/G2E arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodes dt-bindings: rcar-gen3-phy-usb2: Add r8a774c0 support dt-bindings: rcar-gen3-phy-usb2: Add r8a774a1 support arm64: renesas: Enable GPIOLIB to allow GPIO driver selection arm64: enable CMT/TMU support for Renesas SoC clocksource/drivers/sh_tmu: Convert to SPDX identifiers arm64: dts: renesas: r8a774c0: Add TMU device nodes dt-bindings: timer: renesas: tmu: Document r8a774c0 bindings clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLK clk: renesas: r8a774c0: Add TMU clock clk: renesas: r8a774c0: Correct parent clock of DU clk: renesas: r8a774c0: Add missing CANFD clock arm64: dts: renesas: r8a774c0: Add CMT device nodes dt-bindings: timer: renesas, cmt: Document r8a774c0 CMT support dt-bindings: timer: renesas, cmt: Document r8a774a1 CMT support clocksource/drivers/sh_cmt: Add R-Car gen3 support dt-bindings: timer: renesas: cmt: document R-Car gen3 support clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines clocksource/drivers/sh_cmt: Fixup for 64-bit machines clocksource/drivers/sh_cmt: Convert to SPDX identifiers pinctrl: sh-pfc: r8a77990: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77990: Add TMU pins, groups and functions pinctrl: sh-pfc: r8a77990: GP6_9 does not have pull-down capability pinctrl: sh-pfc: r8a77990: Fix MOD_SEL bit numbering pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit2 when using RX2, TX2 and SCK2 pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit3 when using TX0 pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 SEL_I2C1 field width pinctrl: sh-pfc: r8a77990: Fix IOCTRL reg state after s2ram on R-Car E3 pinctrl: sh-pfc: r8a77990: Add CAN FD pins, groups and functions pinctrl: sh-pfc: r8a77990: Add CAN pins, groups and functions arm64: dts: renesas: cat875: Enable PCIe support arm64: dts: renesas: r8a774c0-cat874: Add pciec0 support arm64: dts: renesas: r8a774c0: Add PCIe device node dt-bindings: PCI: rcar: Add device tree support for r8a774c0 arm64: dts: renesas: r8a774c0: Add MSIOF nodes spi: sh-msiof: Add r8a774c0 support spi: sh-msiof: Add r8a774a1 support arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS support dt-bindings: i2c: rcar: Add r8a774c0 support i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E) i2c: sh_mobile: add support for r8a77990 (R-Car E3) dt-bindings: i2c: sh_mobile: Add r8a774c0 support i2c: sh_mobile: document support for r8a77990 (R-Car E3) pinctrl: sh-pfc: r8a77990: Add HSCIF pins, groups, and functions pinctrl: sh-pfc: r8a77990: Add VIN[4|5] groups/functions pinctrl: sh-pfc: Add optional arg to VIN_DATA_PIN_GROUP pinctrl: sh-pfc: Reduce kernel size for narrow VIN channels arm64: dts: renesas: r8a774c0: Add watchdog support dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support arm64: dts: renesas: cat875: Add ethernet support arm64: dts: renesas: r8a774c0: Add Ethernet AVB node dt-bindings: net: ravb: Add support for r8a774c0 SoC arm64: dts: renesas: r8a774c0-cat874: Add uSD support arm64: dts: renesas: r8a774c0: Add SDHI nodes mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0 dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support dt-bindings: mmc: renesas_sdhi: Add r8a77470 support mmc: renesas_sdhi_internal_dmac: Whitelist r8a774a1 mmc: renesas_sdhi: Add r8a774a1 support pinctrl: sh-pfc: r8a77990: Add voltage switch operations for SDHI pinctrl: sh-pfc: r8a77990: Add SDHI pins, groups and functions pinctrl: sh-pfc: r8a77990: Add Audio SSI pins, groups and functions pinctrl: sh-pfc: r8a77990: Add Audio clock pins, groups and functions arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2 arm64: dts: renesas: r8a774c0: Add GPIO device nodes dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support dt-bindings: gpio: rcar: Add r8a774a1 (RZ/G2M) support arm64: dts: renesas: r8a774c0: Add PFC support arm64: dts: renesas: r8a774c0: Add INTC-EX device node pinctrl: sh-pfc: r8a77990: Add INTC-EX pins, groups and function pinctrl: sh-pfc: rcar: Rename automotive-only arrays to automotive arm64: dts: renesas: r8a774c0: Add secondary CA53 CPU core clk: renesas: cpg-mssr: Add r8a774c0 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0 clk: renesas: cpg-mssr: Add r8a774a1 support clk: renesas: rcar-gen3: Add support for mode pin clock selection clk: renesas: rcar-gen3: Add support for RCKSEL clock selection clk: renesas: cpg-mssr: Add support for fixed rate clocks clk: renesas: rcar-gen3: Add support for OSC EXTAL predivider clk: renesas: Add r8a774a1 CPG Core Clock Definitions clk: renesas: Add r8a774c0 CPG Core Clock Definitions arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes dt-bindings: serial: sh-sci: Document r8a774c0 bindings dt-bindings: serial: sh-sci: Document r8a774a1 bindings arm64: dts: renesas: r8a774c0: Add SYS-DMAC controller nodes dmaengine: rcar-dmac: Document R8A774C0 bindings dmaengine: rcar-dmac: Document R8A774A1 bindings arm64: dts: renesas: Add Si-Linux EK874 board support arm64: dts: renesas: Add Si-Linux CAT874 board support arm64: dts: renesas: Initial device tree for r8a774c0 dt-bindings: arm: Add si-linux cat87[45] boards ARM: dts: socfpga: Rename socfpga_cyclone5_de0_{sockit, nano_soc} dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support soc: renesas: rcar-rst: Add support for RZ/G2E dt-bindings: reset: rcar-rst: Document r8a774c0 rst soc: renesas: rcar-rst: Add support for RZ/G2M soc: renesas: rcar-sysc: Add r8a774c0 support dt-bindings: power: rcar-sysc: Document r8a774c0 sysc soc: renesas: rcar-sysc: Add r8a774a1 support dt-bindings: power: Add r8a774c0 SYSC power domain definitions dt-bindings: power: Add r8a774a1 SYSC power domain definitions arm64: defconfig: enable R8A774C0 SoC arm64: defconfig: enable R8A774A1 SoC arm64: Add Renesas R8A774C0 support arm64: Add Renesas R8A774A1 support soc: renesas: Identify RZ/G2E soc: renesas: Identify RZ/G2M dt-bindings: arm: Fix RZ/G2E part number dt-bindings: arm: Document RZ/G2E SoC DT bindings dt-bindings: arm: Document RZ/G2M SoC DT bindings pinctrl: sh-pfc: r8a77990: Add R8A774C0 PFC support pinctrl: sh-pfc: r8a77990: Add MSIOF pins, groups and functions pinctrl: sh-pfc: r8a77990: Add DU pins, groups and function pinctrl: sh-pfc: r8a77990: Add PWM pins, groups and functions dt-bindings: pinctrl: sh-pfc: Document r8a774c0 PFC support pinctrl: sh-pfc: r8a7796: Add R8A774A1 PFC support dt-bindings: pinctrl: sh-pfc: Document r8a774a1 PFC support CIP: Add a number to the version suffix Conflicts: Documentation/devicetree/bindings/i2c/i2c-rcar.txt Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt Documentation/devicetree/bindings/usb/renesas_usb3.txt Documentation/devicetree/bindings/usb/renesas_usbhs.txt Documentation/devicetree/bindings/watchdog/renesas-wdt.txt arch/arm64/boot/dts/vendor/bindings/display/panel/advantech,idk-1110wr.txt arch/arm64/boot/dts/vendor/bindings/display/panel/advantech,idk-2121wr.yaml arch/arm64/boot/dts/vendor/bindings/i2c/i2c-rcar.txt arch/arm64/boot/dts/vendor/bindings/i2c/i2c-sh_mobile.txt arch/arm64/boot/dts/vendor/bindings/i2c/renesas,i2c.txt arch/arm64/boot/dts/vendor/bindings/i2c/renesas,iic.txt arch/arm64/boot/dts/vendor/bindings/media/i2c/imx219.yaml arch/arm64/boot/dts/vendor/bindings/memory-controllers/renesas,rpc-if.yaml arch/arm64/boot/dts/vendor/bindings/pci/rcar-pci-ep.yaml arch/arm64/boot/dts/vendor/bindings/usb/renesas,usb3-peri.txt arch/arm64/boot/dts/vendor/bindings/usb/renesas,usbhs.txt arch/arm64/boot/dts/vendor/bindings/usb/renesas_usb3.txt arch/arm64/boot/dts/vendor/bindings/usb/renesas_usbhs.txt arch/arm64/boot/dts/vendor/bindings/usb/ti,hd3ss3220.txt arch/arm64/boot/dts/vendor/bindings/watchdog/renesas,wdt.txt arch/arm64/boot/dts/vendor/bindings/watchdog/renesas-wdt.txt drivers/clk/qcom/clk-alpha-pll.c drivers/hid/hid-ids.h drivers/irqchip/irq-gic-v3.c drivers/media/platform/qcom/venus/hfi_parser.c drivers/mmc/host/sdhci.h drivers/platform/x86/intel_cht_int33fe.c drivers/slimbus/messaging.c drivers/usb/dwc3/core.c drivers/usb/dwc3/gadget.c drivers/usb/gadget/function/f_fs.c drivers/usb/typec/mux.c fs/ext4/dir.c kernel/time/posix-timers.c mm/oom_kill.c Change-Id: I6ccf7ce22c6636030db6245952c67bfa54aef5a4	2025-09-02 08:35:50 +00:00
Dmitry Antipov	c46d85cbf8	module: ensure that kobject_put() is safe for module type kobjects ... commit a6aeb739974ec73e5217c75a7c008a688d3d5cf1 upstream. In 'lookup_or_create_module_kobject()', an internal kobject is created using 'module_ktype'. So call to 'kobject_put()' on error handling path causes an attempt to use an uninitialized completion pointer in 'module_kobject_release()'. In this scenario, we just want to release kobject without an extra synchronization required for a regular module unloading process, so adding an extra check whether 'complete()' is actually required makes 'kobject_put()' safe. Reported-by: syzbot+7fb8a372e1f6add936dd@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7fb8a372e1f6add936dd Fixes: 942e443127 ("module: Fix mod->mkobj.kobj potentially freed too early") Cc: stable@vger.kernel.org Suggested-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://lore.kernel.org/r/20250507065044.86529-1-dmantipov@yandex.ru Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ulrich Hecht <uli@kernel.org>	2025-07-17 10:07:54 +02:00
Greg Kroah-Hartman	302e1d9773	Merge 4.19.316 into android-4.19-stable ... Changes in 4.19.316 x86/tsc: Trust initial offset in architectural TSC-adjust MSRs speakup: Fix sizeof() vs ARRAY_SIZE() bug ring-buffer: Fix a race between readers and resize checks net: smc91x: Fix m68k kernel compilation for ColdFire CPU nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix potential hang in nilfs_detach_log_writer() tty: n_gsm: fix possible out-of-bounds in gsm0_receive() wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt class net: usb: qmi_wwan: add Telit FN920C04 compositions drm/amd/display: Set color_mgmt_changed to true on unsuspend ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating ASoC: dt-bindings: rt5645: add cbj sleeve gpio property ASoC: da7219-aad: fix usage of device_get_named_child_node() crypto: bcm - Fix pointer arithmetic firmware: raspberrypi: Use correct device for DMA mappings ecryptfs: Fix buffer size for tag 66 packet nilfs2: fix out-of-range warning parisc: add missing export of __cmpxchg_u8() crypto: ccp - Remove forward declaration crypto: ccp - drop platform ifdef checks s390/cio: fix tracepoint subchannel type field jffs2: prevent xattr node from overflowing the eraseblock null_blk: Fix missing mutex_destroy() at module removal md: fix resync softlockup when bitmap size is less than array size power: supply: cros_usbpd: provide ID table for avoiding fallback match nfsd: drop st_mutex before calling move_to_close_lru() wifi: ath10k: poll service ready message before failing x86/boot: Ignore relocations in .notes sections in walk_relocs() too qed: avoid truncating work queue length scsi: ufs: qcom: Perform read back after writing reset bit scsi: ufs: cleanup struct utp_task_req_desc scsi: ufs: add a low-level __ufshcd_issue_tm_cmd helper scsi: ufs: core: Perform read back after disabling interrupts scsi: ufs: core: Perform read back after disabling UIC_COMMAND_COMPL irqchip/alpine-msi: Fix off-by-one in allocation error path ACPI: disable -Wstringop-truncation scsi: libsas: Fix the failure of adding phy with zero-address to port scsi: hpsa: Fix allocation size for Scsi_Host private data x86/purgatory: Switch to the position-independent small code model wifi: ath10k: Fix an error code problem in ath10k_dbg_sta_write_peer_debug_trigger() wifi: ath10k: populate board data for WCN3990 macintosh/via-macii: Remove BUG_ON assertions macintosh/via-macii, macintosh/adb-iop: Clean up whitespace macintosh/via-macii: Fix "BUG: sleeping function called from invalid context" wifi: carl9170: add a proper sanity check for endpoints wifi: ar5523: enable proper endpoint verification sh: kprobes: Merge arch_copy_kprobe() into arch_prepare_kprobe() Revert "sh: Handle calling csum_partial with misaligned data" scsi: bfa: Ensure the copied buf is NUL terminated scsi: qedf: Ensure the copied buf is NUL terminated wifi: mwl8k: initialize cmd->addr[] properly net: usb: sr9700: stop lying about skb->truesize m68k: Fix spinlock race in kernel thread creation m68k/mac: Use '030 reset method on SE/30 m68k: mac: Fix reboot hang on Mac IIci net: ethernet: cortina: Locking fixes af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg net: usb: smsc95xx: stop lying about skb->truesize net: openvswitch: fix overwriting ct original tuple for ICMPv6 ipv6: sr: add missing seg6_local_exit ipv6: sr: fix incorrect unregister order ipv6: sr: fix invalid unregister error path drm/amd/display: Fix potential index out of bounds in color transformation function mtd: rawnand: hynix: fixed typo fbdev: shmobile: fix snprintf truncation drm/mediatek: Add 0 size check to mtk_drm_gem_obj powerpc/fsl-soc: hide unused const variable fbdev: sisfb: hide unused variables media: ngene: Add dvb_ca_en50221_init return value check media: radio-shark2: Avoid led_names truncations fbdev: sh7760fb: allow modular build drm/arm/malidp: fix a possible null pointer dereference ASoC: tracing: Export SND_SOC_DAPM_DIR_OUT to its value RDMA/hns: Use complete parentheses in macros x86/insn: Fix PUSH instruction in x86 instruction decoder opcode map ext4: avoid excessive credit estimate in ext4_tmpfile() SUNRPC: Fix gss_free_in_token_pages() selftests/kcmp: Make the test output consistent and clear selftests/kcmp: remove unused open mode RDMA/IPoIB: Fix format truncation compilation errors netrom: fix possible dead-lock in nr_rt_ioctl() af_packet: do not call packet_read_pending() from tpacket_destruct_skb() sched/topology: Don't set SD_BALANCE_WAKE on cpuset domain relax sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level greybus: lights: check return of get_channel_from_mode dmaengine: idma64: Add check for dma_set_max_seg_size firmware: dmi-id: add a release callback function serial: max3100: Lock port->lock when calling uart_handle_cts_change() serial: max3100: Update uart_driver_registered on driver removal serial: max3100: Fix bitwise types greybus: arche-ctrl: move device table to its right location microblaze: Remove gcc flag for non existing early_printk.c file microblaze: Remove early printk call from cpuinfo-static.c usb: gadget: u_audio: Clear uac pointer when freed. stm class: Fix a double free in stm_register_device() ppdev: Remove usage of the deprecated ida_simple_xx() API ppdev: Add an error check in register_device extcon: max8997: select IRQ_DOMAIN instead of depending on it f2fs: add error prints for debugging mount failure f2fs: fix to release node block count in error path of f2fs_new_node_page() serial: sh-sci: Extract sci_dma_rx_chan_invalidate() serial: sh-sci: protect invalidating RXDMA on shutdown libsubcmd: Fix parse-options memory leak Input: ims-pcu - fix printf string overflow Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation drm/msm/dpu: use kms stored hw mdp block um: Fix return value in ubd_init() um: Add winch to winch_handlers before registering winch IRQ media: stk1160: fix bounds checking in stk1160_copy_video() powerpc/pseries: Add failure related checks for h_get_mpp and h_get_ppp um: Fix the -Wmissing-prototypes warning for __switch_mm media: cec: cec-adap: always cancel work in cec_transmit_msg_fh media: cec: cec-api: add locking in cec_release() null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION() x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y nfc: nci: Fix uninit-value in nci_rx_work ipv6: sr: fix memleak in seg6_hmac_init_algo params: lift param_set_uint_minmax to common code tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). openvswitch: Set the skbuff pkt_type for proper pmtud support. arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY virtio: delete vq in vp_find_vqs_msix() when request_irq() fails net: fec: avoid lock evasion when reading pps_enable nfc: nci: Fix kcov check in nci_rx_work() nfc: nci: Fix handling of zero-length payload packets in nci_rx_work() netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu() spi: Don't mark message DMA mapped when no transfer in it is nvmet: fix ns enable/disable possible hang net/mlx5e: Use rx_missed_errors instead of rx_dropped for reporting buffer exhaustion dma-buf/sw-sync: don't enable IRQ from sync_print_obj() enic: Validate length of nl attributes in enic_set_vf_port smsc95xx: remove redundant function arguments smsc95xx: use usbnet->driver_priv net: usb: smsc95xx: fix changing LED_SEL bit value updated from EEPROM net:fec: Add fec_enet_deinit() kconfig: fix comparison to constant symbols, 'm', 'n' ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound ALSA: timer: Set lower bound of start tick time genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline SUNRPC: Fix loop termination condition in gss_free_in_token_pages() binder: fix max_thread type inconsistency mmc: core: Do not force a retune before RPMB switch nilfs2: fix use-after-free of timer for log writer thread vxlan: Fix regression when dropping packets due to invalid src addresses neighbour: fix unaligned access to pneigh_entry ata: pata_legacy: make legacy_exit() work again arm64: tegra: Correct Tegra132 I2C alias md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING wifi: rtl8xxxu: Fix the TX power of RTL8192CU, RTL8723AU arm64: dts: hi3798cv200: fix the size of GICR media: mxl5xx: Move xpt structures off stack media: v4l2-core: hold videodev_lock until dev reg, finishes fbdev: savage: Handle err return when savagefb_check_var failed netfilter: nf_tables: pass context to nft_set_destroy() netfilter: nftables: rename set element data activation/deactivation functions netfilter: nf_tables: drop map element references from preparation phase netfilter: nft_set_rbtree: allow loose matching of closing element in interval netfilter: nft_set_rbtree: Add missing expired checks netfilter: nft_set_rbtree: Switch to node list walk for overlap detection netfilter: nft_set_rbtree: fix null deref on element insertion netfilter: nft_set_rbtree: fix overlap expiration walk netfilter: nf_tables: don't skip expired elements during walk netfilter: nf_tables: GC transaction API to avoid race with control plane netfilter: nf_tables: adapt set backend to use GC transaction API netfilter: nf_tables: remove busy mark and gc batch API netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path netfilter: nf_tables: GC transaction race with netns dismantle netfilter: nf_tables: GC transaction race with abort path netfilter: nf_tables: defer gc run if previous batch is still pending netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction netfilter: nft_set_rbtree: use read spinlock to avoid datapath contention netfilter: nft_set_hash: try later when GC hits EAGAIN on iteration netfilter: nf_tables: fix memleak when more than 255 elements expired netfilter: nf_tables: unregister flowtable hooks on netns exit netfilter: nf_tables: double hook unregistration in netns path netfilter: nftables: update table flags from the commit phase netfilter: nf_tables: fix table flag updates netfilter: nf_tables: disable toggling dormant table state more than once netfilter: nf_tables: bogus EBUSY when deleting flowtable after flush (for 4.19) netfilter: nft_dynset: fix timeouts later than 23 days netfilter: nftables: exthdr: fix 4-byte stack OOB write netfilter: nft_dynset: report EOPNOTSUPP on missing set feature netfilter: nft_dynset: relax superfluous check on set updates netfilter: nf_tables: mark newset as dead on transaction abort netfilter: nf_tables: skip dead set elements in netlink dump netfilter: nf_tables: validate NFPROTO_* family netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nf_tables: set dormant flag on hook register failure netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate() netfilter: nf_tables: do not compare internal table flags on updates netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout netfilter: nf_tables: reject new basechain after table flag update netfilter: nf_tables: discard table flag update with pending basechain deletion KVM: arm64: Allow AArch32 PSTATE.M to be restored as System mode crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak net/9p: fix uninit-value in p9_client_rpc() intel_th: pci: Add Meteor Lake-S CPU support sparc64: Fix number of online CPUs kdb: Fix buffer overflow during tab-complete kdb: Use format-strings rather than '\0' injection in kdb_read() kdb: Fix console handling when editing and tab-completing commands kdb: Merge identical case statements in kdb_read() kdb: Use format-specifiers rather than memset() for padding in kdb_read() net: fix __dst_negative_advice() race sparc: move struct termio to asm/termios.h ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find() s390/ap: Fix crash in AP internal function modify_bitmap() nfs: fix undefined behavior in nfs_block_bits() Linux 4.19.316 Change-Id: I51ad6b82ea33614c19b33c26ae939c4a95430d4f Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>	2024-06-17 09:34:03 +00:00
Sagi Grimberg	459de98d7a	params: lift param_set_uint_minmax to common code ... [ Upstream commit 2a14c9ae15a38148484a128b84bff7e9ffd90d68 ] It is a useful helper hence move it to common code so others can enjoy it. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Stable-dep-of: 3ebc46ca8675 ("tcp: Fix shift-out-of-bounds in dctcp_update_alpha().") Signed-off-by: Sasha Levin <sashal@kernel.org>	2024-06-16 13:23:35 +02:00
Will McVicker	0a2394dc5a	ANDROID: GKI: export symbols from abi_gki_aarch64_qcom_whitelist ... Run the script, $ ../build/gki/add_EXPORT_SYMBOL_GPL < abi_gki_aarch64_qcom_whitelist This will export all the required symbols that are in this kernel. Signed-off-by: Will McVicker <willmcvicker@google.com> Bug: 153886473 Test: compile Change-Id: I703509d75104cd86f472481346e3efbd235121ab	2020-04-13 21:36:41 +00:00
Chris Wilson	edc41b3c54	kernel/params.c: downgrade warning for unsafe parameters ... As using an unsafe module parameter is, by its very definition, an expected user action, emitting a warning is overkill. Nothing has yet gone wrong, and we add a taint flag for any future oops should something actually go wrong. So instead of having a user controllable pr_warn, downgrade it to a pr_notice for "a normal, but significant condition". We make use of unsafe kernel parameters in igt (https://cgit.freedesktop.org/drm/igt-gpu-tools/) (we have not yet succeeded in removing all such debugging options), which generates a warning and taints the kernel. The warning is unhelpful as we then need to filter it out again as we check that every test themselves do not provoke any kernel warnings. Link: http://lkml.kernel.org/r/20180226151919.9674-1-chris@chris-wilson.co.uk Fixes: 91f9d330cc ("module: make it possible to have unsafe, tainting module params") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jean Delvare <khali@linux-fr.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Petri Latvala <petri.latvala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2018-04-11 10:28:37 -07:00
Jean Delvare	e0596c80f4	kernel/params.c: improve STANDARD_PARAM_DEF readability ... Align the parameters passed to STANDARD_PARAM_DEF for clarity. Link: http://lkml.kernel.org/r/20170928162728.756143cc@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Suggested-by: Ingo Molnar <mingo@kernel.org> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-10-03 17:54:26 -07:00
Jean Delvare	96802e6b1d	kernel/params.c: fix an overflow in param_attr_show ... Function param_attr_show could overflow the buffer it is operating on. The buffer size is PAGE_SIZE, and the string returned by attribute->param->ops->get is generated by scnprintf(buffer, PAGE_SIZE, ...) so it could be PAGE_SIZE - 1 long, with the terminating '\0' at the very end of the buffer. Calling strcat(..., "\n") on this isn't safe, as the '\0' will be replaced by '\n' (OK) and then another '\0' will be added past the end of the buffer (not OK.) Simply add the trailing '\n' when writing the attribute contents to the buffer originally. This is safe, and also faster. Credits to Teradata for discovering this issue. Link: http://lkml.kernel.org/r/20170928162602.60c379c7@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-10-03 17:54:26 -07:00
Jean Delvare	90ceb2a3ad	kernel/params.c: fix the maximum length in param_get_string ... The length parameter of strlcpy() is supposed to reflect the size of the target buffer, not of the source string. Harmless in this case as the buffer is PAGE_SIZE long and the source string is always much shorter than this, but conceptually wrong, so let's fix it. Link: http://lkml.kernel.org/r/20170928162515.24846b4f@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-10-03 17:54:26 -07:00
Jean Delvare	630cc2b30a	kernel/params.c: align add_sysfs_param documentation with code ... This parameter is named kp, so the documentation should use that. Fixes: 9b473de872 ("param: Fix duplicate module prefixes") Link: http://lkml.kernel.org/r/20170919142656.64aea59e@endymion Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2017-10-03 17:54:23 -07:00
Baoquan He	f51b17c8d9	boot/param: Move next_arg() function to lib/cmdline.c for later reuse ... next_arg() will be used to parse boot parameters in the x86/boot/compressed code, so move it to lib/cmdline.c for better code reuse. No change in functionality. Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Jens Axboe <axboe@fb.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dan.j.williams@intel.com Cc: dave.jiang@intel.com Cc: dyoung@redhat.com Cc: keescook@chromium.org Cc: zijun_hu <zijun_hu@htc.com> Link: http://lkml.kernel.org/r/1492436099-4017-2-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2017-04-18 10:37:13 +02:00
Linus Torvalds	50c36504fc	Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux ... Pull module updates from Rusty Russell: "Nothing exciting, minor tweaks and cleanups" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scripts: [modpost] add new sections to white list modpost: Add flag -E for making section mismatches fatal params: don't ignore the rest of cmdline if parse_one() fails modpost: abort if a module symbol is too long	2015-11-09 15:53:39 -08:00
Dan Streetman	3d9c637f4a	module: export param_free_charp() ... Change the param_free_charp() function from static to exported. It is used by zswap in the next patch ("zswap: use charp for zswap param strings"). Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2015-11-06 17:50:42 -08:00
Oleg Nesterov	74b22c465c	params: don't ignore the rest of cmdline if parse_one() fails ... parse_args() just aborts after it hits an error, so other args at the same initcall level are simply ignored. This can lead to other hard-to-understand problems, for example my testing machine panics during the boot if I pass "locktorture.verbose=true". Change parse_args() to save the err code for return and continue. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-08-26 10:36:19 +09:30
Linus Torvalds	02201e3f1b	Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux ... Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...	2015-07-01 10:49:25 -07:00
Stephen Rothwell	20bdc2cfdb	modules: only use mod->param_lock if CONFIG_MODULES ... Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-06-28 14:50:12 +09:30
Rusty Russell	cf2fde7b39	param: fix module param locks when !CONFIG_SYSFS. ... As Dan Streetman points out, the entire point of locking for is to stop sysfs accesses, so they're elided entirely in the !SYSFS case. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-06-28 14:46:14 +09:30
Dan Streetman	b51d23e4e9	module: add per-module param_lock ... Add a "param_lock" mutex to each module, and update params.c to use the correct built-in or module mutex while locking kernel params. Remove the kparam_block_sysfs_r/w() macros, replace them with direct calls to kernel_param_[un]lock(module). The kernel param code currently uses a single mutex to protect modification of any and all kernel params. While this generally works, there is one specific problem with it; a module callback function cannot safely load another module, i.e. with request_module() or even with indirect calls such as crypto_has_alg(). If the module to be loaded has any of its params configured (e.g. with a /etc/modprobe.d/* config file), then the attempt will result in a deadlock between the first module param callback waiting for modprobe, and modprobe trying to lock the single kernel param mutex to set the new module's param. This fixes that by using per-module mutexes, so that each individual module is protected against concurrent changes in its own kernel params, but is not blocked by changes to other module params. All built-in modules continue to use the built-in mutex, since they will always be loaded at runtime and references (e.g. request_module(), crypto_has_alg()) to them will never cause load-time param changing. This also simplifies the interface used by modules to block sysfs access to their params; while there are currently functions to block and unblock sysfs param access which are split up by read and write and expect a single kernel param to be passed, their actual operation is identical and applies to all params, not just the one passed to them; they simply lock and unlock the global param mutex. They are replaced with direct calls to kernel_param_[un]lock(THIS_MODULE), which locks THIS_MODULE's param_lock, or if the module is built-in, it locks the built-in mutex. Suggested-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-06-23 15:27:38 +09:30
Dan Streetman	5104b7d767	module: make perm const ... Change the struct kernel_param.perm field to a const, as it should never be changed. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cut from larger patch)	2015-06-23 15:27:37 +09:30
Rusty Russell	74c3dea355	params: suppress unused variable error, warn once just in case code changes. ... It shouldn't fail due to OOM (it's boot time), and already warns if we get two identical names. But you never know what the future holds, and WARN_ON_ONCE() keeps gcc happy with minimal code. Reported-by: Louis Langholtz <lou_langholtz@me.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-06-23 15:27:37 +09:30
Luis R. Rodriguez	154be21c58	kernel/params.c: export param_ops_bool_enable_only ... This will grant access to this helper to code built as modules. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: David Howells <dhowells@redhat.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Kyle McMartin <kyle@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-05-28 11:32:12 +09:30
Luis R. Rodriguez	d19f05d8a8	kernel/params.c: generalize bool_enable_only ... This takes out the bool_enable_only implementation from the module loading code and generalizes it so that others can make use of it. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: cocci@systeme.lip6.fr Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-05-28 11:32:11 +09:30
Luis R. Rodriguez	9c27847dda	kernel/params: constify struct kernel_param_ops uses ... Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-05-28 11:32:10 +09:30
Luis R. Rodriguez	ecc8617053	module: add extra argument for parse_params() callback ... This adds an extra argument onto parse_params() to be used as a way to make the unused callback a bit more useful and generic by allowing the caller to pass on a data structure of its choice. An example use case is to allow us to easily make module parameters for every module which we will do next. @ parse @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ extern char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )); @ parse_mod @ identifier name, args, params, num, level_min, level_max; identifier unknown, param, val, doing; type s16; @@ char *parse_args(const char *name, char *args, const struct kernel_param *params, unsigned num, s16 level_min, s16 level_max, + void *arg, int (*unknown)(char *param, char *val, const char *doing + , void *arg )) { ... } @ parse_args_found @ expression R, E1, E2, E3, E4, E5, E6; identifier func; @@ ( R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | R = parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, &func); | parse_args(E1, E2, E3, E4, E5, E6, + NULL, NULL); ) @ parse_args_unused depends on parse_args_found @ identifier parse_args_found.func; @@ int func(char *param, char *val, const char *unused + , void *arg ) { ... } @ mod_unused depends on parse_args_found @ identifier parse_args_found.func; expression A1, A2, A3; @@ - func(A1, A2, A3); + func(A1, A2, A3, NULL); Generated-by: Coccinelle SmPL Cc: cocci@systeme.lip6.fr Cc: Tejun Heo <tj@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jean Delvare <jdelvare@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: linux-kernel@vger.kernel.org Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2015-05-20 00:25:24 -07:00
Rusty Russell	b9cc4489c6	params: handle quotes properly for values not of form foo="bar". ... When starting kernel with arguments like: init=/bin/sh -c "echo arguments" the trailing double quote is not removed which results in following command being executed: /bin/sh -c 'echo arguments"' Reported-by: Arthur Gautier <baloo@gandi.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-04-15 13:31:23 +09:30
Rusty Russell	c772be5231	param: fix uninitialized read with CONFIG_DEBUG_LOCK_ALLOC ... ignore_lockdep is uninitialized, and sysfs_attr_init() doesn't initialize it, so memset to 0. Reported-by: Huang Ying <ying.huang@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2015-01-20 11:38:31 +10:30
Rusty Russell	574732c73d	param: initialize store function to NULL if not available. ... I rebased Kees' 'param: do not set store func without write perm' on top of my 'params: cleanup sysfs allocation'. However, my patch uses krealloc which doesn't zero memory, leaving .store unset. Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2014-12-23 15:07:41 +10:30
Kees Cook	b0a65b0ccc	param: do not set store func without write perm ... When a module_param is defined without DAC write permissions, it can still be changed at runtime and updated. Drivers using a 0444 permission may be surprised that these values can still be changed. For drivers that want to allow updates, any S_IW* flag will set the "store" function as before. Drivers without S_IW* flags will have the "store" function unset, unforcing a read-only value. Drivers that wish neither "store" nor "get" can continue to use "0" for perms to stay out of sysfs entirely. Old behavior: # cd /sys/module/snd/parameters # ls -l total 0 -r--r--r-- 1 root root 4096 Dec 11 13:55 cards_limit -r--r--r-- 1 root root 4096 Dec 11 13:55 major -r--r--r-- 1 root root 4096 Dec 11 13:55 slots # cat major 116 # echo -1 > major -bash: major: Permission denied # chmod u+w major # echo -1 > major # cat major -1 New behavior: ... # chmod u+w major # echo -1 > major -bash: echo: write error: Input/output error Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2014-12-18 12:38:51 +10:30
Rusty Russell	18eb74fa94	params: cleanup sysfs allocation ... commit 63662139e5 attempted to patch a leak (which would only happen on OOM, ie. never), but it didn't quite work. This rewrites the code to be as simple as possible. add_sysfs_param() adds a parameter. If it fails, it's the caller's responsibility to clean up the parameters which already exist. The kzalloc-then-always-krealloc pattern is perhaps overly simplistic, but this code has clearly confused people. It worked on me... Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2014-11-11 17:07:47 +10:30
Geert Uytterhoeven	63a12d9d01	kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h> ... Consolidate the various external const and non-const declarations of __start___param[] and __stop___param in <linux/moduleparam.h>. This requires making a few struct kernel_param pointers in kernel/params.c const. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2014-10-14 02:18:28 +02:00
Rusty Russell	7a486d3781	param: check for tainting before calling set op. ... This means every set op doesn't need to call it, and it can move into params.c. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2014-08-27 21:54:10 +09:30
Jani Nikula	91f9d330cc	module: make it possible to have unsafe, tainting module params ... Add flags field to struct kernel_params, and add the first flag: unsafe parameter. Modifying a kernel parameter with the unsafe flag set, either via the kernel command line or sysfs, will issue a warning and taint the kernel. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jean Delvare <khali@linux-fr.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Jon Mason <jon.mason@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2014-08-27 21:54:08 +09:30
Jani Nikula	6a4c264313	module: rename KERNEL_PARAM_FL_NOARG to avoid confusion ... Make it clear this is about kernel_param_ops, not kernel_param (which will soon have a flags field of its own). No functional changes. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jean Delvare <khali@linux-fr.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Jon Mason <jon.mason@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2014-08-27 21:54:07 +09:30
Hannes Reinecke	b4210b810e	Add module param type 'ullong' ... Some driver might want to pass in an 64-bit value, so introduce a module param type 'ullong'. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>	2014-07-17 22:07:37 +02:00
Rusty Russell	51e158c12a	param: hand arguments after -- straight to init ... The kernel passes any args it doesn't need through to init, except it assumes anything containing '.' belongs to the kernel (for a module). This change means all users can clearly distinguish which arguments are for init. For example, the kernel uses debug ("dee-bug") to mean log everything to the console, where systemd uses the debug from the Scandinavian "day-boog" meaning "fail to boot". If a future versions uses argv[] instead of reading /proc/cmdline, this confusion will be avoided. eg: test 'FOO="this is --foo"' -- 'systemd.debug="true true true"' Gives: argv[0] = '/debug-init' argv[1] = 'test' argv[2] = 'systemd.debug=true true true' envp[0] = 'HOME=/' envp[1] = 'TERM=linux' envp[2] = 'FOO=this is --foo' Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2014-04-28 11:48:34 +09:30
Felipe Contreras	88a88b320a	params: improve standard definitions ... We are repeating the functionality of kstrtol in param_set_long, and the same for kstrtoint. We can get rid of the extra code by using the right functions. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2013-12-04 14:09:46 +10:30
Jean Delvare	3a126f85e0	kernel/params: fix handling of signed integer types ... Commit 6072ddc852 ("kernel: replace strict_strto*() with kstrto*()") broke the handling of signed integer types, fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reported-by: Christian Kujau <lists@nerdbynature.de> Tested-by: Christian Kujau <lists@nerdbynature.de> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2013-09-28 12:35:52 -07:00
Jingoo Han	6072ddc852	kernel: replace strict_strto*() with kstrto*() ... The usage of strict_strto*() is not preferred, because strict_strto*() is obsolete. Thus, kstrto*() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2013-09-12 15:38:03 -07:00
Li Zhong	942e443127	module: Fix mod->mkobj.kobj potentially freed too early ... DEBUG_KOBJECT_RELEASE helps to find the issue attached below. After some investigation, it seems the reason is: The mod->mkobj.kobj(ffffffffa01600d0 below) is freed together with mod itself in free_module(). However, its children still hold references to it, as the delay caused by DEBUG_KOBJECT_RELEASE. So when the child(holders below) tries to decrease the reference count to its parent in kobject_del(), BUG happens as it tries to access already freed memory. This patch tries to fix it by waiting for the mod->mkobj.kobj to be really released in the module removing process (and some error code paths). [ 1844.175287] kobject: 'holders' (ffff88007c1f1600): kobject_release, parent ffffffffa01600d0 (delayed) [ 1844.178991] kobject: 'notes' (ffff8800370b2a00): kobject_release, parent ffffffffa01600d0 (delayed) [ 1845.180118] kobject: 'holders' (ffff88007c1f1600): kobject_cleanup, parent ffffffffa01600d0 [ 1845.182130] kobject: 'holders' (ffff88007c1f1600): auto cleanup kobject_del [ 1845.184120] BUG: unable to handle kernel paging request at ffffffffa01601d0 [ 1845.185026] IP: [<ffffffff812cda81>] kobject_put+0x11/0x60 [ 1845.185026] PGD 1a13067 PUD 1a14063 PMD 7bd30067 PTE 0 [ 1845.185026] Oops: 0000 [#1] PREEMPT [ 1845.185026] Modules linked in: xfs libcrc32c [last unloaded: kprobe_example] [ 1845.185026] CPU: 0 PID: 18 Comm: kworker/0:1 Tainted: G O 3.11.0-rc6-next-20130819+ #1 [ 1845.185026] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 1845.185026] Workqueue: events kobject_delayed_cleanup [ 1845.185026] task: ffff88007ca51f00 ti: ffff88007ca5c000 task.ti: ffff88007ca5c000 [ 1845.185026] RIP: 0010:[<ffffffff812cda81>] [<ffffffff812cda81>] kobject_put+0x11/0x60 [ 1845.185026] RSP: 0018:ffff88007ca5dd08 EFLAGS: 00010282 [ 1845.185026] RAX: 0000000000002000 RBX: ffffffffa01600d0 RCX: ffffffff8177d638 [ 1845.185026] RDX: ffff88007ca5dc18 RSI: 0000000000000000 RDI: ffffffffa01600d0 [ 1845.185026] RBP: ffff88007ca5dd18 R08: ffffffff824e9810 R09: ffffffffffffffff [ 1845.185026] R10: ffff8800ffffffff R11: dead4ead00000001 R12: ffffffff81a95040 [ 1845.185026] R13: ffff88007b27a960 R14: ffff88007c1f1600 R15: 0000000000000000 [ 1845.185026] FS: 0000000000000000(0000) GS:ffffffff81a23000(0000) knlGS:0000000000000000 [ 1845.185026] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1845.185026] CR2: ffffffffa01601d0 CR3: 0000000037207000 CR4: 00000000000006b0 [ 1845.185026] Stack: [ 1845.185026] ffff88007c1f1600 ffff88007c1f1600 ffff88007ca5dd38 ffffffff812cdb7e [ 1845.185026] 0000000000000000 ffff88007c1f1640 ffff88007ca5dd68 ffffffff812cdbfe [ 1845.185026] ffff88007c974800 ffff88007c1f1640 ffff88007ff61a00 0000000000000000 [ 1845.185026] Call Trace: [ 1845.185026] [<ffffffff812cdb7e>] kobject_del+0x2e/0x40 [ 1845.185026] [<ffffffff812cdbfe>] kobject_delayed_cleanup+0x6e/0x1d0 [ 1845.185026] [<ffffffff81063a45>] process_one_work+0x1e5/0x670 [ 1845.185026] [<ffffffff810639e3>] ? process_one_work+0x183/0x670 [ 1845.185026] [<ffffffff810642b3>] worker_thread+0x113/0x370 [ 1845.185026] [<ffffffff810641a0>] ? rescuer_thread+0x290/0x290 [ 1845.185026] [<ffffffff8106bfba>] kthread+0xda/0xe0 [ 1845.185026] [<ffffffff814ff0f0>] ? _raw_spin_unlock_irq+0x30/0x60 [ 1845.185026] [<ffffffff8106bee0>] ? kthread_create_on_node+0x130/0x130 [ 1845.185026] [<ffffffff8150751a>] ret_from_fork+0x7a/0xb0 [ 1845.185026] [<ffffffff8106bee0>] ? kthread_create_on_node+0x130/0x130 [ 1845.185026] Code: 81 48 c7 c7 28 95 ad 81 31 c0 e8 9b da 01 00 e9 4f ff ff ff 66 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 85 ff 74 1d <f6> 87 00 01 00 00 01 74 1e 48 8d 7b 38 83 6b 38 01 0f 94 c0 84 [ 1845.185026] RIP [<ffffffff812cda81>] kobject_put+0x11/0x60 [ 1845.185026] RSP <ffff88007ca5dd08> [ 1845.185026] CR2: ffffffffa01601d0 [ 1845.185026] ---[ end trace 49a70afd109f5653 ]--- Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2013-09-03 16:35:47 +09:30
Chen Gang	f4940ab7c5	kernel/params.c: use scnprintf() instead of sprintf() ... For some strings (e.g. version string), they are permitted to be larger than PAGE_SIZE (although meaningless), so recommend to use scnprintf() instead of sprintf(). Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2013-08-20 15:37:46 +09:30
Steven Rostedt	ab013c5f60	module: Add flag to allow mod params to have no arguments ... Currently the params.c code allows only two "set" functions to have no arguments. If a parameter does not have an argument, then it looks at the set function and tests if it is either param_set_bool() or param_set_bint(). If it is not one of these functions, then it fails the loading of the module. But there may be module parameters that have different set functions and still allow no arguments. But unless each of these cases adds their function to the if statement, it wont be allowed to have no arguments. This method gets rather messing and does not scale. Instead, introduce a flags field to the kernel_param_ops, where if the flag KERNEL_PARAM_FL_NOARG is set, the parameter will not fail if it does not contain an argument. It will be expected that the corresponding set function can handle a NULL pointer as "val". Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2013-08-20 15:37:42 +09:30
Christoph Jaeger	79ac6834c2	module: fix sprintf format specifier in param_get_byte() ... In param_get_byte(), to which the macro STANDARD_PARAM_DEF(byte, ...) expands, "%c" is used to print an unsigned char. So it gets printed as a character what is not intended here. Use "%hhu" instead. [Rusty: note drivers which would be effected: drivers/net/wireless/cw1200/main.c drivers/ntb/ntb_transport.c:68 drivers/scsi/lpfc/lpfc_attr.c drivers/usb/atm/speedtch.c drivers/usb/gadget/g_ffs.c ] Acked-by: Jon Mason <jon.mason@intel.com> (for ntb) Acked-by: Michal Nazarewicz <mina86@mina86.com> (for g_ffs.c) Signed-off-by: Christoph Jaeger <christophjaeger@linux.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2013-08-20 15:37:28 +09:30
Jean Delvare	b634d130e4	There is no /sys/parameters ... There is no such path as /sys/parameters, module parameters live in /sys/module/*/parameters. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2013-07-02 15:38:19 +09:30
David Woodhouse	63662139e5	params: Fix potential memory leak in add_sysfs_param() ... On allocation failure, it would fail to free the old attrs array which was no longer referenced by anything (since it would free the old module_param_attrs struct on the way out). Comment the suspicious-looking krealloc() usage to explain why it *isn't* actually buggy, despite looking like a classic realloc() usage bug. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>	2013-03-18 11:40:21 +00:00
Jim Cromie	b5f3abf950	params: replace printk(KERN_<LVL>...) with pr_<lvl>(...) ... I left 1 printk which uses __FILE__, __LINE__ explicitly, which should not be subject to generic preferences expressed via pr_fmt(). + tweaks suggested by Joe Perches: - add doing to irq-enabled warning, like others. It wont happen often.. - change sysfs failure crit, not just err, make it 1 line in logs. - coalese 2 format fragments into 1 >80 char line cc: Joe Perches <joe@perches.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2012-05-04 17:28:18 -07:00
Jim Cromie	1ef9eaf2bf	params.c: fix Smack complaint about parse_args ... In commit 9fb48c744: "params: add 3rd arg to option handler callback signature", the if-guard added to the pr_debug was overzealous; no callers pass NULL, and existing code above and below the guard assumes as much. Change the if-guard to match, and silence the Smack complaint. CC: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2012-05-04 17:24:22 -07:00
Jim Cromie	9fb48c744b	params: add 3rd arg to option handler callback signature ... Add a 3rd arg, named "doing", to unknown-options callbacks invoked from parse_args(). The arg is passed as: "Booting kernel" from start_kernel(), initcall_level_names[i] from do_initcall_level(), mod->name from load_module(), via parse_args(), parse_one() parse_args() already has the "name" parameter, which is renamed to "doing" to better reflect current uses 1,2 above. parse_args() passes it to an altered parse_one(), which now passes it down into the unknown option handler callbacks. The mod->name will be needed to handle dyndbg for loadable modules, since params passed by modprobe are not qualified (they do not have a "$modname." prefix), and by the time the unknown-param callback is called, the module name is not otherwise available. Minor tweaks: Add param-name to parse_one's pr_debug(), current message doesnt identify the param being handled, add it. Add a pr_info to print current level and level_name of the initcall, and number of registered initcalls at that level. This adds 7 lines to dmesg output, like: initlevel:6=device, 172 registered initcalls Drop "parameters" from initcall_level_names[], its unhelpful in the pr_info() added above. This array is passed into parse_args() by do_initcall_level(). CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2012-04-30 14:05:27 -04:00
Pawel Moll	026cee0086	params: <level>_initcall-like kernel parameters ... This patch adds a set of macros that can be used to declare kernel parameters to be parsed _before_ initcalls at a chosen level are executed. We rename the now-unused "flags" field of struct kernel_param as the level. It's signed, for when we use this for early params as well, in future. Linker macro collating init calls had to be modified in order to add additional symbols between levels that are later used by the init code to split the calls into blocks. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2012-03-26 12:50:51 +10:30
Rusty Russell	8b8252813d	module_param: remove support for bool parameters which are really int. ... module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. This eliminates that code (though leaves the flags field in the struct, for impending use). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>	2012-03-26 12:50:51 +10:30
Paul Gortmaker	13ae246db4	includecheck: delete any duplicate instances of module.h ... Different tree maintainers picked up independently generated trivial compile fixes based on linux-next testing, resulting in some cases where a file would have got more than one addition of module.h once everything was all merged together. Delete any duplicates so includecheck isn't complaining about anything related to module.h/export.h changes. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>	2012-02-28 19:31:56 -05:00