diff --git a/presets/Geiss - Cartographie.milk b/presets/Geiss - Cartographie.milk
deleted file mode 100755
index d2a74ceb3..000000000
--- a/presets/Geiss - Cartographie.milk
+++ /dev/null
@@ -1,51 +0,0 @@
-[preset00]
-fGammaAdj=1.350000
-fVideoEchoZoom=2.000000
-fVideoEchoAlpha=0.000000
-nVideoEchoOrientation=0
-fDecay=1.000000
-nWaveMode=2
-bAdditiveWaves=1
-bWaveDots=0
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bMotionVectorsOn=0
-nMotionVectorsX=12
-nMotionVectorsY=9
-fWaveAlpha=3.699999
-fWaveScale=1.300000
-fWaveSmoothing=0.900000
-fWaveParam=0.000000
-fModWaveAlphaStart=0.750000
-fModWaveAlphaEnd=0.950000
-fWarpAnimSpeed=1.000000
-fWarpScale=1.000000
-fZoomExponent=1.000415
-fShader=1.000000
-zoom=1.006882
-rot=0.040000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=0.000000
-warp=0.057228
-sx=1.000000
-sy=1.000000
-wave_r=0.650000
-wave_g=0.650000
-wave_b=0.650000
-wave_x=0.500000
-wave_y=0.500000
-per_frame_1=wave_r = wave_r + 0.350*( 0.60*sin(0.742*time) + 0.40*sin(1.021*time) );
-per_frame_2=wave_g = wave_g + 0.350*( 0.60*sin(0.703*time) + 0.40*sin(0.969*time) );
-per_frame_3=wave_b = wave_b + 0.350*( 0.60*sin(1.090*time) + 0.40*sin(0.963*time) );
-per_frame_4=rot = rot + 0.010*( 0.60*sin(0.381*time) + 0.40*sin(0.579*time) );
-per_frame_5=cx = cx + 0.110*( 0.60*sin(0.374*time) + 0.40*sin(0.294*time) );
-per_frame_6=cy = cy + 0.110*( 0.60*sin(0.393*time) + 0.40*sin(0.223*time) );
-per_frame_7=decay=decay-0.025*pow(0.5+0.5*sin(time*1.5),4.8);
-per_pixel_1=dx=0.05*sin(x*80+y*94+rad*97+ang*22+time*0.733);
-per_pixel_2=dy=0.05*sin(x*60+y*114+rad*77+ang*32+time*0.83);
-per_pixel_3=zoom=zoom+0.05*rad;
-fRating=2.000000
diff --git a/presets/Geiss - Fog Tunnel.milk b/presets/Geiss - Fog Tunnel.milk
deleted file mode 100755
index 871e6361d..000000000
--- a/presets/Geiss - Fog Tunnel.milk
+++ /dev/null
@@ -1,70 +0,0 @@
-[preset00]
-fRating=3.000000
-fGammaAdj=1.800000
-fDecay=0.980000
-fVideoEchoZoom=1.289000
-fVideoEchoAlpha=0.400000
-nVideoEchoOrientation=1
-nWaveMode=0
-bAdditiveWaves=0
-bWaveDots=0
-bWaveThick=1
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bRedBlueStereo=0
-bBrighten=0
-bDarken=0
-bSolarize=0
-bInvert=0
-fWaveAlpha=0.794075
-fWaveScale=0.387000
-fWaveSmoothing=0.400000
-fWaveParam=0.000000
-fModWaveAlphaStart=0.750000
-fModWaveAlphaEnd=0.950000
-fWarpAnimSpeed=1.000000
-fWarpScale=1.000000
-fZoomExponent=3.400000
-fShader=0.000000
-zoom=1.042000
-rot=-0.020000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=-0.010000
-warp=0.122000
-sx=1.000000
-sy=1.000000
-wave_r=0.650000
-wave_g=0.650000
-wave_b=0.650000
-wave_x=0.500000
-wave_y=0.440000
-ob_size=0.010000
-ob_r=0.000000
-ob_g=0.000000
-ob_b=0.000000
-ob_a=0.000000
-ib_size=0.010000
-ib_r=0.250000
-ib_g=0.250000
-ib_b=0.250000
-ib_a=0.000000
-nMotionVectorsX=12.000000
-nMotionVectorsY=9.000000
-mv_dx=0.000000
-mv_dy=0.000000
-mv_l=0.900000
-mv_r=1.000000
-mv_g=1.000000
-mv_b=1.000000
-mv_a=0.000000
-per_frame_1=wave_r = wave_r + 0.350*( 0.60*sin(0.850*time) + 0.40*sin(1.007*time) );
-per_frame_2=wave_g = wave_g + 0.350*( 0.60*sin(0.705*time) + 0.40*sin(0.998*time) );
-per_frame_3=wave_b = wave_b + 0.350*( 0.60*sin(0.715*time) + 0.40*sin(0.938*time) );
-per_frame_4=rot = rot + 0.003*( 0.60*sin(0.381*time) + 0.40*sin(0.579*time) );
-per_frame_5=cx = cx + 0.110*( 0.60*sin(0.374*time) + 0.40*sin(0.294*time) );
-per_frame_6=cy = cy + 0.110*( 0.60*sin(0.393*time) + 0.40*sin(0.223*time) );
-per_frame_7=warp = warp + 0.231*( 0.60*sin(0.324*time) + 0.40*sin(0.347*time) );
diff --git a/presets/Geiss - Happy Drops.milk b/presets/Geiss - Happy Drops.milk
deleted file mode 100755
index 64ea6486a..000000000
--- a/presets/Geiss - Happy Drops.milk
+++ /dev/null
@@ -1,72 +0,0 @@
-[preset00]
-fRating=3.000000
-fGammaAdj=1.994000
-fDecay=0.980000
-fVideoEchoZoom=2.000000
-fVideoEchoAlpha=0.000000
-nVideoEchoOrientation=0
-nWaveMode=2
-bAdditiveWaves=1
-bWaveDots=0
-bWaveThick=1
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bRedBlueStereo=0
-bBrighten=0
-bDarken=0
-bSolarize=0
-bInvert=0
-fWaveAlpha=0.420000
-fWaveScale=0.691358
-fWaveSmoothing=0.400000
-fWaveParam=0.000000
-fModWaveAlphaStart=0.750000
-fModWaveAlphaEnd=0.950000
-fWarpAnimSpeed=1.000000
-fWarpScale=1.000000
-fZoomExponent=0.888000
-fShader=1.000000
-zoom=0.999710
-rot=0.000000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=0.000000
-warp=0.298816
-sx=1.000000
-sy=1.000000
-wave_r=0.650000
-wave_g=0.650000
-wave_b=0.650000
-wave_x=0.500000
-wave_y=0.500000
-ob_size=0.010000
-ob_r=0.000000
-ob_g=0.000000
-ob_b=0.000000
-ob_a=0.000000
-ib_size=0.010000
-ib_r=0.250000
-ib_g=0.250000
-ib_b=0.250000
-ib_a=0.000000
-nMotionVectorsX=12.000000
-nMotionVectorsY=9.000000
-mv_dx=0.000000
-mv_dy=0.000000
-mv_l=0.900000
-mv_r=1.000000
-mv_g=1.000000
-mv_b=1.000000
-mv_a=0.000000
-per_frame_1=wave_r = wave_r + 0.350*( 0.60*sin(0.742*time) + 0.40*sin(1.021*time) );
-per_frame_2=wave_g = wave_g + 0.350*( 0.60*sin(0.703*time) + 0.40*sin(0.969*time) );
-per_frame_3=wave_b = wave_b + 0.350*( 0.60*sin(1.090*time) + 0.40*sin(0.963*time) );
-per_frame_4=rot = rot + 0.040*( 0.60*sin(0.381*time) + 0.40*sin(0.279*time) );
-per_frame_5=cx = cx + 0.110*( 0.60*sin(0.374*time) + 0.40*sin(0.294*time) );
-per_frame_6=cy = cy + 0.110*( 0.60*sin(0.393*time) + 0.40*sin(0.223*time) );
-per_pixel_1=dr = 0.01 + 0.03*min(max(bass_att-1,0.0), 0.5)*sin(rad*15);
-per_pixel_2=dx = dx + dr*cos(ang)*0.75;
-per_pixel_3=dy = dy + dr*sin(-ang);
diff --git a/presets/Geiss - Hurricane.milk b/presets/Geiss - Hurricane.milk
deleted file mode 100755
index 414288525..000000000
--- a/presets/Geiss - Hurricane.milk
+++ /dev/null
@@ -1,70 +0,0 @@
-[preset00]
-fRating=3.000000
-fGammaAdj=2.000000
-fDecay=0.980000
-fVideoEchoZoom=2.000000
-fVideoEchoAlpha=0.000000
-nVideoEchoOrientation=0
-nWaveMode=1
-bAdditiveWaves=0
-bWaveDots=0
-bWaveThick=1
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bRedBlueStereo=0
-bBrighten=0
-bDarken=0
-bSolarize=0
-bInvert=0
-fWaveAlpha=0.300000
-fWaveScale=1.170370
-fWaveSmoothing=0.500000
-fWaveParam=0.000000
-fModWaveAlphaStart=0.750000
-fModWaveAlphaEnd=0.950000
-fWarpAnimSpeed=1.000000
-fWarpScale=2.853000
-fZoomExponent=3.600000
-fShader=0.000000
-zoom=1.014000
-rot=-0.160000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=0.000000
-warp=0.309000
-sx=1.000000
-sy=1.000000
-wave_r=0.600000
-wave_g=0.600000
-wave_b=0.600000
-wave_x=0.500000
-wave_y=0.470000
-ob_size=0.010000
-ob_r=0.000000
-ob_g=0.000000
-ob_b=0.000000
-ob_a=0.000000
-ib_size=0.010000
-ib_r=0.250000
-ib_g=0.250000
-ib_b=0.250000
-ib_a=0.000000
-nMotionVectorsX=12.000000
-nMotionVectorsY=9.000000
-mv_dx=0.000000
-mv_dy=0.000000
-mv_l=0.900000
-mv_r=1.000000
-mv_g=1.000000
-mv_b=1.000000
-mv_a=0.000000
-per_frame_1=wave_r = wave_r + 0.400*( 0.60*sin(0.933*time) + 0.40*sin(1.045*time) );
-per_frame_2=wave_g = wave_g + 0.400*( 0.60*sin(0.900*time) + 0.40*sin(0.956*time) );
-per_frame_3=wave_b = wave_b + 0.400*( 0.60*sin(0.910*time) + 0.40*sin(0.920*time) );
-per_frame_4=zoom = zoom + 0.023*( 0.60*sin(0.339*time) + 0.40*sin(0.276*time) );
-per_frame_5=rot = rot + 0.030*( 0.60*sin(0.381*time) + 0.40*sin(0.579*time) );
-per_frame_6=decay = decay - 0.02*equal(frame%40,0);
-per_pixel_1=rot=rot+0.1/(rad+0.1);
diff --git a/presets/Geiss - Many Colors 1.milk b/presets/Geiss - Many Colors 1.milk
deleted file mode 100755
index 0087149fe..000000000
--- a/presets/Geiss - Many Colors 1.milk
+++ /dev/null
@@ -1,46 +0,0 @@
-[preset00]
-fGammaAdj=2.700000
-fVideoEchoZoom=2.000000
-fVideoEchoAlpha=0.000000
-nVideoEchoOrientation=0
-fDecay=0.980000
-nWaveMode=0
-bAdditiveWaves=0
-bWaveDots=0
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bMotionVectorsOn=0
-nMotionVectorsX=12
-nMotionVectorsY=9
-fWaveAlpha=1.000000
-fWaveScale=0.000000
-fWaveSmoothing=0.100000
-fWaveParam=0.000000
-fModWaveAlphaStart=0.750000
-fModWaveAlphaEnd=0.950000
-fWarpAnimSpeed=1.000000
-fWarpScale=1.331000
-fZoomExponent=1.000000
-fShader=0.000000
-zoom=1.014000
-rot=0.000000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=0.000000
-warp=0.467000
-sx=1.000000
-sy=1.000000
-wave_r=0.650000
-wave_g=0.650000
-wave_b=0.650000
-wave_x=0.500000
-wave_y=0.500000
-per_frame_1=wave_r = wave_r + 0.350*( 0.60*sin(0.980*time) + 0.40*sin(1.047*time) );
-per_frame_2=wave_g = wave_g + 0.350*( 0.60*sin(0.835*time) + 0.40*sin(1.081*time) );
-per_frame_3=wave_b = wave_b + 0.350*( 0.60*sin(0.814*time) + 0.40*sin(1.011*time) );
-per_frame_4=rot = rot + 0.030*( 0.60*sin(0.381*time) + 0.40*sin(0.479*time) );
-per_frame_5=cx = cx + 0.110*( 0.60*sin(0.374*time) + 0.40*sin(0.294*time) );
-per_frame_6=cy = cy + 0.110*( 0.60*sin(0.393*time) + 0.40*sin(0.223*time) );
diff --git a/presets/Geiss - Many Colors 2.milk b/presets/Geiss - Many Colors 2.milk
deleted file mode 100755
index 50559f23f..000000000
--- a/presets/Geiss - Many Colors 2.milk
+++ /dev/null
@@ -1,49 +0,0 @@
-[preset00]
-fGammaAdj=2.700000
-fVideoEchoZoom=2.000000
-fVideoEchoAlpha=0.000000
-nVideoEchoOrientation=0
-fDecay=0.970000
-nWaveMode=0
-bAdditiveWaves=0
-bWaveDots=0
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bMotionVectorsOn=0
-nMotionVectorsX=12
-nMotionVectorsY=9
-fWaveAlpha=1.000000
-fWaveScale=0.032033
-fWaveSmoothing=0.100000
-fWaveParam=-0.300000
-fModWaveAlphaStart=0.750000
-fModWaveAlphaEnd=0.950000
-fWarpAnimSpeed=1.000000
-fWarpScale=1.331000
-fZoomExponent=1.000000
-fShader=0.000000
-zoom=1.100549
-rot=0.000000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=0.000000
-warp=0.198054
-sx=1.000000
-sy=1.000000
-wave_r=0.650000
-wave_g=0.650000
-wave_b=0.650000
-wave_x=0.500000
-wave_y=0.500000
-per_frame_1=wave_r = wave_r + 0.350*( 0.60*sin(0.980*time) + 0.40*sin(1.047*time) );
-per_frame_2=wave_g = wave_g + 0.350*( 0.60*sin(0.835*time) + 0.40*sin(1.081*time) );
-per_frame_3=wave_b = wave_b + 0.350*( 0.60*sin(0.814*time) + 0.40*sin(1.011*time) );
-per_frame_4=rot = rot + 0.030*( 0.60*sin(0.381*time) + 0.40*sin(0.479*time) );
-per_frame_5=cx = cx + 0.110*( 0.60*sin(0.374*time) + 0.40*sin(0.294*time) );
-per_frame_6=cy = cy + 0.110*( 0.60*sin(0.393*time) + 0.40*sin(0.223*time) );
-per_frame_7=zoom=zoom+0.05+0.05*sin(time*0.133);
-per_pixel_1=zoom=(zoom-1)*rad+1;
-fRating=4.000000
diff --git a/presets/Rocke - Answer.42.milk b/presets/Rocke - Answer.42.milk
deleted file mode 100755
index 2e2c2a6aa..000000000
--- a/presets/Rocke - Answer.42.milk
+++ /dev/null
@@ -1,67 +0,0 @@
-[preset00]
-fRating=5.000000
-fGammaAdj=1.998000
-fDecay=0.993000
-fVideoEchoZoom=2.000000
-fVideoEchoAlpha=0.000000
-nVideoEchoOrientation=0
-nWaveMode=1
-bAdditiveWaves=1
-bWaveDots=0
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bRedBlueStereo=0
-bBrighten=0
-bDarken=1
-bSolarize=0
-bInvert=0
-fWaveAlpha=5.900000
-fWaveScale=0.750110
-fWaveSmoothing=0.900000
-fWaveParam=0.000000
-fModWaveAlphaStart=0.750000
-fModWaveAlphaEnd=0.950000
-fWarpAnimSpeed=1.000000
-fWarpScale=2.853000
-fZoomExponent=1.000000
-fShader=0.000000
-zoom=0.961900
-rot=-0.010000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=0.000000
-warp=0.000000
-sx=1.000000
-sy=1.000000
-wave_r=0.900000
-wave_g=0.450000
-wave_b=0.000000
-wave_x=0.500000
-wave_y=0.500000
-ob_size=0.010000
-ob_r=0.000000
-ob_g=0.000000
-ob_b=0.000000
-ob_a=1.000000
-ib_size=0.010000
-ib_r=1.000000
-ib_g=1.000000
-ib_b=0.250000
-ib_a=0.000000
-nMotionVectorsX=64.000000
-nMotionVectorsY=19.200005
-mv_l=5.000000
-mv_r=0.500000
-mv_g=0.000000
-mv_b=1.000000
-mv_a=0.100000
-per_frame_1=wave_r = wave_r + 0.1*(0.6*sin(0.933*time) + 0.4*sin(1.072*time));
-per_frame_2=wave_g = wave_g + 0.05*(0.6*sin(0.888*time) + 0.4*sin(0.918*time));
-per_frame_3=wave_b = wave_b + 0.2*(0.6*sin(0.335*time) + 0.4*sin(0.4*time));
-per_frame_4=wave_mystery = 0.5*sin(0.35*bass);
-per_frame_5=decay = decay - 0.01*equal(frame%50,0);
-per_pixel_1=zoom = zoom + (0.1*rad);
-per_pixel_2=rot = rot - 0.15*sin(ang);
diff --git a/presets/Rocke - Answer42.milk b/presets/Rocke - Answer42.milk
deleted file mode 100755
index 025dd5bfc..000000000
--- a/presets/Rocke - Answer42.milk
+++ /dev/null
@@ -1,67 +0,0 @@
-[preset00]
-fRating=5
-fGammaAdj=1.998
-fDecay=0.993
-fVideoEchoZoom=2
-fVideoEchoAlpha=0
-nVideoEchoOrientation=0
-nWaveMode=1
-bAdditiveWaves=1
-bWaveDots=0
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bRedBlueStereo=0
-bBrighten=0
-bDarken=1
-bSolarize=0
-bInvert=0
-fWaveAlpha=5.9
-fWaveScale=0.75011
-fWaveSmoothing=0.9
-fWaveParam=0
-fModWaveAlphaStart=0.75
-fModWaveAlphaEnd=0.95
-fWarpAnimSpeed=1
-fWarpScale=2.853
-fZoomExponent=1
-fShader=0
-zoom=0.9619
-rot=-0.01
-cx=0.5
-cy=0.5
-dx=0
-dy=0
-warp=0
-sx=1
-sy=1
-wave_r=0.9
-wave_g=0.45
-wave_b=0
-wave_x=0.5
-wave_y=0.5
-ob_size=0.01
-ob_r=0
-ob_g=0
-ob_b=0
-ob_a=1
-ib_size=0.01
-ib_r=1
-ib_g=1
-ib_b=0.25
-ib_a=0
-nMotionVectorsX=64
-nMotionVectorsY=19.200005
-mv_l=5
-mv_r=0.5
-mv_g=0
-mv_b=1
-mv_a=0.1
-per_frame_1=wave_r = wave_r + 0.1*(0.6*sin(0.933*time) + 0.4*sin(1.072*time));
-per_frame_2=wave_g = wave_g + 0.05*(0.6*sin(0.888*time) + 0.4*sin(0.918*time));
-per_frame_3=wave_b = wave_b + 0.2*(0.6*sin(0.335*time) + 0.4*sin(0.4*time));
-per_frame_4=wave_mystery = 0.5*sin(0.35*bass);
-per_frame_5=decay = decay - 0.01*equal(frame%50,0);
-per_pixel_1=zoom = zoom + (0.1*rad);
-per_pixel_2=rot = rot - 0.15*sin(ang);
diff --git a/presets/Rovastar & Sperl - Tuxflower.prjm b/presets/Rovastar & Sperl - Tuxflower.prjm
index 7adc0dcc5..e8986ec01 100755
--- a/presets/Rovastar & Sperl - Tuxflower.prjm
+++ b/presets/Rovastar & Sperl - Tuxflower.prjm
@@ -113,7 +113,7 @@ wavecode_3_r=1.000000
wavecode_3_g=1.000000
wavecode_3_b=1.000000
wavecode_3_a=1.000000
-shapecode_0_enabled=1
+shapecode_0_enabled=0
shapecode_0_sides=100
shapecode_0_additive=0
shapecode_0_thickOutline=0
@@ -145,7 +145,7 @@ shape_0_per_frame6=b = 0.25+0.25*sin(time*0.7339);
shape_0_per_frame7=r2 = 0.25+0.25*sin(time*0.6979);
shape_0_per_frame8=g2 = 0.25+0.25*sin(time*0.849);
shape_0_per_frame9=b2 = 0.25+0.25*sin(time*0.8079);
-shapecode_1_enabled=1
+shapecode_1_enabled=0
shapecode_1_sides=100
shapecode_1_additive=0
shapecode_1_thickOutline=0
@@ -177,7 +177,7 @@ shape_1_per_frame6=b = 0.25+0.25*sin(time*0.9339);
shape_1_per_frame7=r2 = 0.25+0.25*sin(time*0.779);
shape_1_per_frame8=g2 = 0.25+0.25*sin(time*0.707);
shape_1_per_frame9=b2 = 0.25+0.25*sin(time*0.747);
-shapecode_2_enabled=1
+shapecode_2_enabled=0
shapecode_2_sides=100
shapecode_2_additive=0
shapecode_2_thickOutline=0
@@ -217,7 +217,7 @@ shapecode_3_textured=1
shapecode_3_imageURL=Tux.tga
shapecode_3_x=0.500000
shapecode_3_y=0.500000
-shapecode_3_rad=0.20068
+shapecode_3_rad=0.150068
shapecode_3_ang=0.000000
shapecode_3_tex_ang=0.000000
shapecode_3_tex_zoom=0.7100000
diff --git a/presets/Scanner (@ztec)2.milk b/presets/Scanner (@ztec)2.milk
deleted file mode 100755
index 2990c8753..000000000
--- a/presets/Scanner (@ztec)2.milk
+++ /dev/null
@@ -1,135 +0,0 @@
-[preset00]
-fRating=2.000000
-fGammaAdj=1.000000
-fDecay=0.998999
-fVideoEchoZoom=1.006596
-fVideoEchoAlpha=0.000000
-nVideoEchoOrientation=3
-nWaveMode=0
-bAdditiveWaves=1
-bWaveDots=0
-bWaveThick=0
-bModWaveAlphaByVolume=0
-bMaximizeWaveColor=1
-bTexWrap=1
-bDarkenCenter=0
-bRedBlueStereo=0
-bBrighten=0
-bDarken=0
-bSolarize=0
-bInvert=0
-fWaveAlpha=4.099998
-fWaveScale=1.886994
-fWaveSmoothing=0.630000
-fWaveParam=-0.500000
-fModWaveAlphaStart=0.710000
-fModWaveAlphaEnd=1.300000
-fWarpAnimSpeed=1.000000
-fWarpScale=1.331000
-fZoomExponent=1.000000
-fShader=0.000000
-zoom=0.999514
-rot=0.000000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=0.000000
-warp=0.010000
-sx=1.000000
-sy=1.000000
-wave_r=0.650000
-wave_g=0.650000
-wave_b=0.650000
-wave_x=0.500000
-wave_y=0.500000
-ob_size=0.055000
-ob_r=1.000000
-ob_g=1.000000
-ob_b=0.000000
-ob_a=0.200000
-ib_size=0.003500
-ib_r=0.000000
-ib_g=0.000000
-ib_b=0.000000
-ib_a=0.000000
-nMotionVectorsX=38.399994
-nMotionVectorsY=24.000004
-mv_dx=0.000000
-mv_dy=0.000002
-mv_l=5.000000
-mv_r=0.000000
-mv_g=0.000000
-mv_b=0.700000
-mv_a=0.000000
-per_frame_1=high_bass = above(bass_att,2);
-per_frame_2=high_treb = above(treb, 2);
-per_frame_3=
-per_frame_4=wave_b = if(high_treb,0,1);
-per_frame_5=
-per_frame_6=//mv_rr = if(high_bass,.5 ,mv_rr*.9);
-per_frame_7=//mv_r = mv_rr;
-per_frame_8=//mv_b = if(high_treb*high_bass,0,1);
-per_frame_9=//mv_g = if(high_treb*high_bass,0,.1*sin(time*.302)+.1);
-per_frame_10=//mv_a = if(above(bass_att,1.5),.6,mv_a);
-per_frame_11=//mv_x = bits *3;
-per_frame_12=//mv_y = mv_x *.8;
-per_frame_13=
-per_frame_14=ob_r = sin(time*.3)/2+.5;
-per_frame_15=ob_g= sin(time*.34)/2+.5;
-per_frame_16=ob_b = sin(time*.3714)/2+.5;
-per_frame_17=
-per_frame_18=boomnow = if(high_bass,time,boomnow);
-per_frame_19=brightness = min(sqr(time-boomnow-.866)+.25,1);
-per_frame_20=av_bass=if(high_bass,av_bass*.8+.2*bass,av_bass);
-per_frame_21=count=count+above(bass,av_bass*1.2);
-per_frame_22=
-per_frame_23=ob_r = ob_r*brightness;
-per_frame_24=ob_g = ob_g*brightness;
-per_frame_25=ob_b = ob_b*brightness;
-per_frame_26=
-per_frame_27=w_dx = (above((w_y*bits)%2,0)*.01-.005)*sin(time);
-per_frame_28=w_dy = (above((w_x*bits)%2,0)*.01-.005)*cos(time);
-per_frame_29=
-per_frame_30=w_x = w_x+w_dx;
-per_frame_31=w_y = w_y +w_dy;
-per_frame_32=monitor = bits;
-per_frame_33=q1 = bits;
-per_frame_34=w_x = if(above(abs(w_x-.5),.5),rand(10)/10,w_x);
-per_frame_35=w_y = if(above(abs(w_y-.5),.5),rand(10)/10,w_y);
-per_frame_36=
-per_frame_37=wave_x = w_x;
-per_frame_38=wave_y = w_y;
-per_frame_39=
-per_frame_40=monitor = brightness;
-per_frame_41=monitor = av_bass;
-per_frame_42=monitor = count;
-per_pixel_1=//---- Rotation Angle
-per_pixel_2=v_ang=time*.2*(x+y)*(.005+.003*(sin(time*.1)+cos(time*.14)));
-per_pixel_3=
-per_pixel_4=v_ang = time+sin(x*(sin(time*.32)*3+4)+y*(sin(time*.42)*3+4));
-per_pixel_5=
-per_pixel_6=//---- Initialisation: X, Y, ANG, CX, CY, DX, DY, SX, SY
-per_pixel_7=//---- to these: VX, VY, VANG, CVX, CVY, DVX, DVY, SVX, SVY
-per_pixel_8=vx = (x-.5)*cos(v_ang) - (y-.5)*sin(v_ang)+.5;
-per_pixel_9=vy = (x-.5)*sin(v_ang) +(y-.5)*cos(v_ang)+.5;
-per_pixel_10=vang=atan((vy-.5)/(vx+.000001-.5))+below(vx,.5)*sign(vy-.5)*3.14159;
-per_pixel_11=cvx = (cx-.5)*cos(v_ang) - (cy-.5)*sin(v_ang)+.5;
-per_pixel_12=cvy = (cx-.5)*sin(v_ang) +(cy-.5)*cos(v_ang)+.5;
-per_pixel_13=svx=sx; svy=sy; dvx=dx; dvy=dy;
-per_pixel_14=cang=atan((vy-cvy)/(vx+.000001-cvx))
-per_pixel_15=+below(vx,cvx)*sign(vy-cvy)*3.14159; //Bonus var: angle about (cvx,cvy)
-per_pixel_16=
-per_pixel_17=//---- Preset Code
-per_pixel_18=
-per_pixel_19=dx=above(vx,sin(time*.5)*.7+.5)*1.0002;
-per_pixel_20=dy = above(vy,(cos(time*.5)*.6+.5));
-per_pixel_21=
-per_pixel_22=//---- Realisation of virtual variables
-per_pixel_23=cx = (cvx-.5)*cos(-v_ang) - (cvy-.5)*sin(-v_ang)+.5;
-per_pixel_24=cy = (cvx-.5)*sin(-v_ang) +(cvy-.5)*cos(-v_ang)+.5;
-per_pixel_25=dvx = dvx + (vx-cvx)*(svx-1);
-per_pixel_26=dvy = dvy - (vy-cvy)*(svy-1);
-per_pixel_27=//dx = dvx*cos(v_ang) - dvy*sin(v_ang);
-per_pixel_28=//dy = -dvx*sin(v_ang) - dvy*cos(v_ang);
-per_pixel_29=//---- End Virtual Axis Code
-per_frame_init_1=bits = rand(7)+7;
diff --git a/presets/Telek - Globetrotting (Sailors Delight Mix).milk b/presets/Telek - Globetrotting (Sailors Delight Mix).milk
deleted file mode 100755
index 1998b56b5..000000000
--- a/presets/Telek - Globetrotting (Sailors Delight Mix).milk
+++ /dev/null
@@ -1,230 +0,0 @@
-[preset00]
-fRating=4.000000
-fGammaAdj=1.000000
-fDecay=1.000000
-fVideoEchoZoom=1.168096
-fVideoEchoAlpha=0.000000
-nVideoEchoOrientation=0
-nWaveMode=0
-bAdditiveWaves=1
-bWaveDots=0
-bWaveThick=0
-bModWaveAlphaByVolume=1
-bMaximizeWaveColor=0
-bTexWrap=1
-bDarkenCenter=0
-bRedBlueStereo=0
-bBrighten=0
-bDarken=0
-bSolarize=0
-bInvert=0
-fWaveAlpha=0.001519
-fWaveScale=1.330283
-fWaveSmoothing=0.000000
-fWaveParam=0.000000
-fModWaveAlphaStart=0.240000
-fModWaveAlphaEnd=1.300001
-fWarpAnimSpeed=1.000000
-fWarpScale=1.331000
-fZoomExponent=0.999998
-fShader=0.000000
-zoom=0.951950
-rot=0.000000
-cx=0.500000
-cy=0.500000
-dx=0.000000
-dy=-0.010000
-warp=0.005536
-sx=1.040604
-sy=1.000000
-wave_r=0.650000
-wave_g=0.650000
-wave_b=0.650000
-wave_x=0.500000
-wave_y=0.500000
-ob_size=0.010000
-ob_r=0.000000
-ob_g=0.000000
-ob_b=0.000000
-ob_a=0.300000
-ib_size=0.000000
-ib_r=0.340000
-ib_g=0.340000
-ib_b=0.340000
-ib_a=0.210000
-nMotionVectorsX=27.859959
-nMotionVectorsY=9.000000
-mv_dx=0.000000
-mv_dy=0.000000
-mv_l=0.900000
-mv_r=1.000000
-mv_g=1.000000
-mv_b=1.000000
-mv_a=0.000000
-wavecode_0_enabled=1
-wavecode_0_samples=200
-wavecode_0_sep=0
-wavecode_0_bSpectrum=1
-wavecode_0_bUseDots=0
-wavecode_0_bDrawThick=1
-wavecode_0_bAdditive=0
-wavecode_0_scaling=0.101300
-wavecode_0_smoothing=0.500000
-wavecode_0_r=0.000000
-wavecode_0_g=0.000000
-wavecode_0_b=0.000000
-wavecode_0_a=1.000000
-wave_0_per_frame1=t1 = 0;
-wave_0_per_frame2=t7 = 0.5;
-wave_0_per_frame3=t8 = 0;
-wave_0_per_point1=tx = max(0,value1-0.005);
-wave_0_per_point2=ty = sample*1.1;
-wave_0_per_point3=
-wave_0_per_point4=t1 = pow(t1*.95,.7)*.35 + tx;
-wave_0_per_point5=y = .1+t1+pow(sin(sample*(3+.5*sin(time*5))+time*1.07)*sin(sample*5.24-time*1.012),2)*.05;
-wave_0_per_point6=x = ty;
-wave_0_per_point7=tt=y-.1;
-wave_0_per_point8=g = min(tt*tt*100,1);
-wave_0_per_point9=b = if(above(tt,.3),min(tt*15-.3,1),1-g);
-wave_0_per_point10=r = if(above(tt,.3),min(tt*15-.3,1),0);
-wavecode_1_enabled=1
-wavecode_1_samples=339
-wavecode_1_sep=0
-wavecode_1_bSpectrum=1
-wavecode_1_bUseDots=0
-wavecode_1_bDrawThick=1
-wavecode_1_bAdditive=0
-wavecode_1_scaling=0.101411
-wavecode_1_smoothing=0.500000
-wavecode_1_r=0.000000
-wavecode_1_g=0.000000
-wavecode_1_b=0.000000
-wavecode_1_a=1.000000
-wave_1_per_frame1=t1 = 0;
-wave_1_per_frame2=t7 = 0.5;
-wave_1_per_frame3=t8 = 0;
-wave_1_per_point1=tx = max(0,value2-0.005);
-wave_1_per_point2=ty = (1-sample)*1.4;
-wave_1_per_point3=
-wave_1_per_point4=t1 = pow(t1*.95,.7)*.29 + tx;
-wave_1_per_point5=//y = .1+t1;
-wave_1_per_point6=y = .1+t1+pow(sin(sample*(3+.5*sin(time*4))+time*1.254)*sin(sample*5.24-time*.975),2)*.05;
-wave_1_per_point7=x = ty-.15;
-wave_1_per_point8=
-wave_1_per_point9=g = min(t1*t1*100,1);
-wave_1_per_point10=b = if(above(t1,.3),min(t1*15-.3,1),1-g);
-wave_1_per_point11=r = if(above(t1,.3),min(t1*15-.3,1),0);
-wavecode_2_enabled=0
-wavecode_2_samples=512
-wavecode_2_sep=0
-wavecode_2_bSpectrum=0
-wavecode_2_bUseDots=0
-wavecode_2_bDrawThick=0
-wavecode_2_bAdditive=0
-wavecode_2_scaling=1.000000
-wavecode_2_smoothing=0.500000
-wavecode_2_r=1.000000
-wavecode_2_g=1.000000
-wavecode_2_b=1.000000
-wavecode_2_a=1.000000
-shapecode_0_enabled=1
-shapecode_0_sides=25
-shapecode_0_additive=0
-shapecode_0_thickOutline=0
-shapecode_0_textured=0
-shapecode_0_x=0.180000
-shapecode_0_y=0.700000
-shapecode_0_rad=0.100000
-shapecode_0_ang=0.000000
-shapecode_0_tex_ang=0.000000
-shapecode_0_tex_zoom=1.000000
-shapecode_0_r=1.000000
-shapecode_0_g=1.000000
-shapecode_0_b=0.000000
-shapecode_0_a=0.400000
-shapecode_0_r2=0.800000
-shapecode_0_g2=0.400000
-shapecode_0_b2=0.000000
-shapecode_0_a2=0.200000
-shapecode_0_border_r=0.000000
-shapecode_0_border_g=0.000000
-shapecode_0_border_b=0.000000
-shapecode_0_border_a=1.000000
-shape_0_per_frame1=x = (time*.05-int(time*.05));
-shape_0_per_frame2=y = sin(x*3.141)*.25+.65;
-shape_0_per_frame3=a =.8-.8*pow(1-sin(x*3.141),.5);
-shape_0_per_frame4=border_a=a;
-shape_0_per_frame5=a2=a;
-shape_0_per_frame6=
-shape_0_per_frame7=
-shape_0_per_frame8=x = (x-.5)*1.33+.5;
-shapecode_1_enabled=1
-shapecode_1_sides=4
-shapecode_1_additive=1
-shapecode_1_thickOutline=0
-shapecode_1_textured=1
-shapecode_1_x=0.500000
-shapecode_1_y=0.545000
-shapecode_1_rad=1.468148
-shapecode_1_ang=0.000000
-shapecode_1_tex_ang=0.000000
-shapecode_1_tex_zoom=0.819544
-shapecode_1_r=1.000000
-shapecode_1_g=0.000000
-shapecode_1_b=0.000000
-shapecode_1_a=0.212000
-shapecode_1_r2=0.000000
-shapecode_1_g2=0.000000
-shapecode_1_b2=0.000000
-shapecode_1_a2=0.000000
-shapecode_1_border_r=1.000000
-shapecode_1_border_g=1.000000
-shapecode_1_border_b=1.000000
-shapecode_1_border_a=0.000000
-shapecode_2_enabled=0
-shapecode_2_sides=4
-shapecode_2_additive=0
-shapecode_2_thickOutline=0
-shapecode_2_textured=0
-shapecode_2_x=0.500000
-shapecode_2_y=0.500000
-shapecode_2_rad=0.100000
-shapecode_2_ang=0.000000
-shapecode_2_tex_ang=0.000000
-shapecode_2_tex_zoom=1.000000
-shapecode_2_r=1.000000
-shapecode_2_g=0.000000
-shapecode_2_b=0.000000
-shapecode_2_a=1.000000
-shapecode_2_r2=0.000000
-shapecode_2_g2=1.000000
-shapecode_2_b2=0.000000
-shapecode_2_a2=0.000000
-shapecode_2_border_r=1.000000
-shapecode_2_border_g=1.000000
-shapecode_2_border_b=1.000000
-shapecode_2_border_a=0.100000
-shapecode_3_enabled=0
-shapecode_3_sides=4
-shapecode_3_additive=0
-shapecode_3_thickOutline=0
-shapecode_3_textured=0
-shapecode_3_x=0.500000
-shapecode_3_y=0.500000
-shapecode_3_rad=0.100000
-shapecode_3_ang=0.000000
-shapecode_3_tex_ang=0.000000
-shapecode_3_tex_zoom=1.000000
-shapecode_3_r=1.000000
-shapecode_3_g=0.000000
-shapecode_3_b=0.000000
-shapecode_3_a=1.000000
-shapecode_3_r2=0.000000
-shapecode_3_g2=1.000000
-shapecode_3_b2=0.000000
-shapecode_3_a2=0.000000
-shapecode_3_border_r=1.000000
-shapecode_3_border_g=1.000000
-shapecode_3_border_b=1.000000
-shapecode_3_border_a=0.100000
-per_frame_1=dx = dx+.004*sin(time*.2)+.008*sin(time*.105+sin(time*.55));
diff --git a/src/projectM-engine/ChangeLog b/src/projectM-engine/ChangeLog
index 6bb8558ce..d18d5bc97 100644
--- a/src/projectM-engine/ChangeLog
+++ b/src/projectM-engine/ChangeLog
@@ -16,6 +16,8 @@ This release includes months of refactoring. The code changes are immense. The l
*projectM-engine, projectM-xmms, projectM-jack, and projectM-test build system converted to CMake
+*3D Song title animation
+
*New Configuration File (more options, more flexible)
New for version 0.99
diff --git a/src/projectM-engine/Makefile.am b/src/projectM-engine/Makefile.am
deleted file mode 100755
index 88b9f0087..000000000
--- a/src/projectM-engine/Makefile.am
+++ /dev/null
@@ -1,48 +0,0 @@
-lib_LTLIBRARIES = libprojectM.la
-
-libprojectM_la_SOURCES=\
-PCM.cc \
-beat_detect.cc \
-browser.cc \
-builtin_funcs.cc \
-console_interface.cc \
-custom_shape.cc \
-custom_wave.cc \
-editor.cc \
-eval.cc \
-fftsg.cc \
-func.cc \
-glConsole.cc \
-init_cond.cc \
-menu.cc \
-param.cc \
-parser.cc \
-pbuffer.cc \
-per_frame_eqn.cc \
-per_pixel_eqn.cc \
-preset.cc \
-projectM.cc \
-splaytree.cc \
-timer.cc \
-tree_types.cc \
-wipemalloc.cc
-
-libprojectMincludedir = $(includedir)/projectM
-libprojectMinclude_HEADERS = projectM.h pbuffer.h event.h console_interface.h PCM.h
-
-libprojectM_la_LDFLAGS = -version-info 0:0:0
-
-AM_LIBS = @GL_LIBS@ @FTGL_LIBS@
-AM_CXXFLAGS= -DLINUX -D__CPLUSPLUS @GL_CFLAGS@ @FTGL_CFLAGS@
-
-libprojectM_la_LIBADD = $(AM_LIBS)
-
-libprojectMconfigdir = $(datadir)/projectM
-libprojectMconfig_DATA = share/config share/config.fastcomputers share/config.slowcomputers
-
-libprojectMfontdir = $(datadir)/projectM/fonts
-libprojectMfont_DATA = share/fonts/*.ttf
-
-libprojectMpresetdir = $(datadir)/projectM/presets
-libprojectMpreset_DATA= share/presets/*.milk
-
diff --git a/src/projectM-engine/Makefile.dist b/src/projectM-engine/Makefile.dist
deleted file mode 100644
index 1b8b8d0ae..000000000
--- a/src/projectM-engine/Makefile.dist
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# projectM -- Milkdrop-esque visualisation SDK
-# Copyright (C)2003-2007 projectM Team
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-# See 'LICENSE.txt' included within this release
-
-clean:
- rm -rf Debug
- rm -rf Release
- rm projectM.ncb
- rm projectM.opt
diff --git a/src/projectM-engine/Makefile.in b/src/projectM-engine/Makefile.in
deleted file mode 100755
index 0f72972a2..000000000
--- a/src/projectM-engine/Makefile.in
+++ /dev/null
@@ -1,621 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = src
-DIST_COMMON = $(libprojectMinclude_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- $(top_srcdir)/m4/ax_check_gl.m4 \
- $(top_srcdir)/m4/ax_lang_compiler_ms.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(libdir)" \
- "$(DESTDIR)$(libprojectMconfigdir)" \
- "$(DESTDIR)$(libprojectMfontdir)" \
- "$(DESTDIR)$(libprojectMpresetdir)" \
- "$(DESTDIR)$(libprojectMincludedir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(lib_LTLIBRARIES)
-am__DEPENDENCIES_1 =
-libprojectM_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
-am_libprojectM_la_OBJECTS = PCM.lo beat_detect.lo browser.lo \
- builtin_funcs.lo console_interface.lo custom_shape.lo \
- custom_wave.lo editor.lo eval.lo fftsg.lo func.lo glConsole.lo \
- init_cond.lo menu.lo param.lo parser.lo pbuffer.lo \
- per_frame_eqn.lo per_pixel_eqn.lo preset.lo projectM.lo \
- splaytree.lo timer.lo tree_types.lo wipemalloc.lo
-libprojectM_la_OBJECTS = $(am_libprojectM_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CXXFLAGS) $(CXXFLAGS)
-CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
- $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libprojectM_la_SOURCES)
-DIST_SOURCES = $(libprojectM_la_SOURCES)
-libprojectMconfigDATA_INSTALL = $(INSTALL_DATA)
-libprojectMfontDATA_INSTALL = $(INSTALL_DATA)
-libprojectMpresetDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(libprojectMconfig_DATA) $(libprojectMfont_DATA) \
- $(libprojectMpreset_DATA)
-libprojectMincludeHEADERS_INSTALL = $(INSTALL_HEADER)
-HEADERS = $(libprojectMinclude_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-FTGL_CFLAGS = @FTGL_CFLAGS@
-FTGL_LIBS = @FTGL_LIBS@
-GL_CFLAGS = @GL_CFLAGS@
-GL_LIBS = @GL_LIBS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-POW_LIB = @POW_LIB@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-acx_pthread_config = @acx_pthread_config@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-lib_LTLIBRARIES = libprojectM.la
-libprojectM_la_SOURCES = \
-PCM.cc \
-beat_detect.cc \
-browser.cc \
-builtin_funcs.cc \
-console_interface.cc \
-custom_shape.cc \
-custom_wave.cc \
-editor.cc \
-eval.cc \
-fftsg.cc \
-func.cc \
-glConsole.cc \
-init_cond.cc \
-menu.cc \
-param.cc \
-parser.cc \
-pbuffer.cc \
-per_frame_eqn.cc \
-per_pixel_eqn.cc \
-preset.cc \
-projectM.cc \
-splaytree.cc \
-timer.cc \
-tree_types.cc \
-wipemalloc.cc
-
-libprojectMincludedir = $(includedir)/projectM
-libprojectMinclude_HEADERS = projectM.h pbuffer.h event.h console_interface.h PCM.h
-libprojectM_la_LDFLAGS = -version-info 0:0:0
-AM_LIBS = @GL_LIBS@ @FTGL_LIBS@
-AM_CXXFLAGS = -DLINUX -D__CPLUSPLUS @GL_CFLAGS@ @FTGL_CFLAGS@
-libprojectM_la_LIBADD = $(AM_LIBS)
-libprojectMconfigdir = $(datadir)/projectM
-libprojectMconfig_DATA = share/config share/config.fastcomputers share/config.slowcomputers
-libprojectMfontdir = $(datadir)/projectM/fonts
-libprojectMfont_DATA = share/fonts/*.ttf
-libprojectMpresetdir = $(datadir)/projectM/presets
-libprojectMpreset_DATA = share/presets/*.milk
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cc .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
- @$(NORMAL_INSTALL)
- test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- if test -f $$p; then \
- f=$(am__strip_dir) \
- echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
- $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
- else :; fi; \
- done
-
-uninstall-libLTLIBRARIES:
- @$(NORMAL_UNINSTALL)
- @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- p=$(am__strip_dir) \
- echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
- $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
- done
-
-clean-libLTLIBRARIES:
- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
- @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-libprojectM.la: $(libprojectM_la_OBJECTS) $(libprojectM_la_DEPENDENCIES)
- $(CXXLINK) -rpath $(libdir) $(libprojectM_la_LDFLAGS) $(libprojectM_la_OBJECTS) $(libprojectM_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/PCM.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/beat_detect.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/browser.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/builtin_funcs.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/console_interface.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/custom_shape.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/custom_wave.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/editor.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eval.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fftsg.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/func.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/glConsole.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/init_cond.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/menu.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/param.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parser.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pbuffer.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/per_frame_eqn.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/per_pixel_eqn.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/preset.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/projectM.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/splaytree.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timer.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tree_types.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wipemalloc.Plo@am__quote@
-
-.cc.o:
-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
-
-.cc.obj:
-@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.cc.lo:
-@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-install-libprojectMconfigDATA: $(libprojectMconfig_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(libprojectMconfigdir)" || $(mkdir_p) "$(DESTDIR)$(libprojectMconfigdir)"
- @list='$(libprojectMconfig_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(libprojectMconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(libprojectMconfigdir)/$$f'"; \
- $(libprojectMconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(libprojectMconfigdir)/$$f"; \
- done
-
-uninstall-libprojectMconfigDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(libprojectMconfig_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(libprojectMconfigdir)/$$f'"; \
- rm -f "$(DESTDIR)$(libprojectMconfigdir)/$$f"; \
- done
-install-libprojectMfontDATA: $(libprojectMfont_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(libprojectMfontdir)" || $(mkdir_p) "$(DESTDIR)$(libprojectMfontdir)"
- @list='$(libprojectMfont_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(libprojectMfontDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(libprojectMfontdir)/$$f'"; \
- $(libprojectMfontDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(libprojectMfontdir)/$$f"; \
- done
-
-uninstall-libprojectMfontDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(libprojectMfont_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(libprojectMfontdir)/$$f'"; \
- rm -f "$(DESTDIR)$(libprojectMfontdir)/$$f"; \
- done
-install-libprojectMpresetDATA: $(libprojectMpreset_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(libprojectMpresetdir)" || $(mkdir_p) "$(DESTDIR)$(libprojectMpresetdir)"
- @list='$(libprojectMpreset_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(libprojectMpresetDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(libprojectMpresetdir)/$$f'"; \
- $(libprojectMpresetDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(libprojectMpresetdir)/$$f"; \
- done
-
-uninstall-libprojectMpresetDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(libprojectMpreset_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(libprojectMpresetdir)/$$f'"; \
- rm -f "$(DESTDIR)$(libprojectMpresetdir)/$$f"; \
- done
-install-libprojectMincludeHEADERS: $(libprojectMinclude_HEADERS)
- @$(NORMAL_INSTALL)
- test -z "$(libprojectMincludedir)" || $(mkdir_p) "$(DESTDIR)$(libprojectMincludedir)"
- @list='$(libprojectMinclude_HEADERS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(libprojectMincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libprojectMincludedir)/$$f'"; \
- $(libprojectMincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libprojectMincludedir)/$$f"; \
- done
-
-uninstall-libprojectMincludeHEADERS:
- @$(NORMAL_UNINSTALL)
- @list='$(libprojectMinclude_HEADERS)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(libprojectMincludedir)/$$f'"; \
- rm -f "$(DESTDIR)$(libprojectMincludedir)/$$f"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS)
-installdirs:
- for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(libprojectMconfigdir)" "$(DESTDIR)$(libprojectMfontdir)" "$(DESTDIR)$(libprojectMpresetdir)" "$(DESTDIR)$(libprojectMincludedir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-libprojectMconfigDATA \
- install-libprojectMfontDATA install-libprojectMincludeHEADERS \
- install-libprojectMpresetDATA
-
-install-exec-am: install-libLTLIBRARIES
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
- uninstall-libprojectMconfigDATA uninstall-libprojectMfontDATA \
- uninstall-libprojectMincludeHEADERS \
- uninstall-libprojectMpresetDATA
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libLTLIBRARIES clean-libtool ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am \
- install-libLTLIBRARIES install-libprojectMconfigDATA \
- install-libprojectMfontDATA install-libprojectMincludeHEADERS \
- install-libprojectMpresetDATA install-man install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-info-am \
- uninstall-libLTLIBRARIES uninstall-libprojectMconfigDATA \
- uninstall-libprojectMfontDATA \
- uninstall-libprojectMincludeHEADERS \
- uninstall-libprojectMpresetDATA
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/src/projectM-engine/Renderer.cpp b/src/projectM-engine/Renderer.cpp
index 06ee85f0b..efcb2e045 100644
--- a/src/projectM-engine/Renderer.cpp
+++ b/src/projectM-engine/Renderer.cpp
@@ -85,10 +85,17 @@ Renderer::Renderer(int width, int height, int gx, int gy, int texsize, BeatDetec
title_font = new FTGLPixmapFont(title_fontURL.c_str());
other_font = new FTGLPixmapFont(menu_fontURL.c_str());
+ other_font->UseDisplayList(true);
+ title_font->UseDisplayList(true);
+
poly_font = new FTGLExtrdFont(title_fontURL.c_str());
+
+ poly_font->UseDisplayList(true);
poly_font->Depth(20);
poly_font->FaceSize(72);
+
+ poly_font->UseDisplayList(true);
#endif /** USE_FTGL */
@@ -395,7 +402,7 @@ void Renderer::reset(int w, int h)
glShadeModel( GL_SMOOTH);
glCullFace( GL_BACK );
- glFrontFace( GL_CCW );
+ //glFrontFace( GL_CCW );
glClearColor( 0, 0, 0, 0 );
@@ -417,7 +424,7 @@ void Renderer::reset(int w, int h)
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
glEnable( GL_LINE_SMOOTH );
- glHint(GL_LINE_SMOOTH_HINT, GL_NICEST);
+
glEnable(GL_POINT_SMOOTH);
glClear(GL_COLOR_BUFFER_BIT);
@@ -428,7 +435,10 @@ void Renderer::reset(int w, int h)
glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE);
- glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_FASTEST);
+
+ //glHint(GL_LINE_SMOOTH_HINT, GL_NICEST);
+ //glHint(GL_POINT_SMOOTH_HINT, GL_NICEST);
+ //glHint(GL_PERSPECTIVE_CORRECTION_HINT, GL_NICEST);
if (!this->renderTarget->useFBO)
{
@@ -1200,11 +1210,11 @@ void Renderer::draw_title_to_screen(bool flip) {
setUpLighting();
- glEnable( GL_CULL_FACE);
- glEnable( GL_DEPTH_TEST);
- glClear( GL_DEPTH_BUFFER_BIT);
+ //glEnable(GL_POLYGON_SMOOTH);
+ //glEnable( GL_CULL_FACE);
+ glEnable(GL_DEPTH_TEST);
+ glClear(GL_DEPTH_BUFFER_BIT);
-
int draw;
if (drawtitle>=80) draw = 80;
else draw = drawtitle;
@@ -1220,7 +1230,7 @@ void Renderer::draw_title_to_screen(bool flip) {
title_y *= .6;
}
glBlendFunc(GL_SRC_ALPHA,GL_ONE_MINUS_SRC_ALPHA);
- // glBlendFunc(GL_ONE_MINUS_DST_COLOR,GL_ZERO);
+ //glBlendFunc(GL_SRC_ALPHA_SATURATE,GL_ONE);
glColor4f(1.0,1.0,1.0,1.0);
glMatrixMode (GL_PROJECTION);
@@ -1239,7 +1249,7 @@ void Renderer::draw_title_to_screen(bool flip) {
poly_font->Render(this->title.c_str() );
- //glBlendFunc(GL_SRC_ALPHA,GL_ONE_MINUS_SRC_ALPHA);
+ glBlendFunc(GL_SRC_ALPHA,GL_ONE_MINUS_SRC_ALPHA);
this->drawtitle++;
@@ -1255,6 +1265,7 @@ void Renderer::draw_title_to_screen(bool flip) {
glDisable(GL_COLOR_MATERIAL);
glDisable(GL_LIGHTING);
+ glDisable(GL_POLYGON_SMOOTH);
}
#endif /** USE_FTGL */
}
diff --git a/src/projectM-engine/config b/src/projectM-engine/config
deleted file mode 100644
index bf066ae2f..000000000
--- a/src/projectM-engine/config
+++ /dev/null
@@ -1,22 +0,0 @@
-projectM Config file (ONLY CHANGE THE NUMBERS!!!!!!)
-------------------------------------------------------
-Texture Size (Must be power of 2) [256,512,1024,2048, etc]
-512
-Grid X Dimension (Higher is Better but much slower) 12-60
-32
-Grid Y Dimension (Higher is Better but much slower) 8-45
-24
-Windowed Width (Initial window width)
-512
-Windowed Height (Initial window width)
-512
-Fullscreen Width (set to your native screen resolution)
-1024
-Fullscreen Height (set to your native screen resolution)
-768
-FPS (Higher the Better) 30-90 is realisitc
-35
-Fullscreen on Startup (1=yes, 0=no)
-0
-X Server to Display projectM default is ":0.0"
-:0.0
diff --git a/src/projectM-engine/libprojectM/Debug/libprojectM.pch b/src/projectM-engine/libprojectM/Debug/libprojectM.pch
deleted file mode 100755
index e8c8d9c27..000000000
Binary files a/src/projectM-engine/libprojectM/Debug/libprojectM.pch and /dev/null differ
diff --git a/src/projectM-engine/libprojectM/Debug/vc60.idb b/src/projectM-engine/libprojectM/Debug/vc60.idb
deleted file mode 100755
index 0f48fc1bb..000000000
Binary files a/src/projectM-engine/libprojectM/Debug/vc60.idb and /dev/null differ
diff --git a/src/projectM-engine/libprojectM/Debug/vc60.pdb b/src/projectM-engine/libprojectM/Debug/vc60.pdb
deleted file mode 100755
index 6e47e71d2..000000000
Binary files a/src/projectM-engine/libprojectM/Debug/vc60.pdb and /dev/null differ
diff --git a/src/projectM-engine/libprojectM/libprojectM.plg b/src/projectM-engine/libprojectM/libprojectM.plg
deleted file mode 100755
index 1f8cd9f10..000000000
--- a/src/projectM-engine/libprojectM/libprojectM.plg
+++ /dev/null
@@ -1,16 +0,0 @@
-
-
-
-Build Log
-
---------------------Configuration: libprojectM - Win32 Debug--------------------
-
-Command Lines
-
-
-
-Results
-libprojectM.lib - 0 error(s), 0 warning(s)
-
-
-
diff --git a/src/projectM-jack/ChangeLog b/src/projectM-jack/ChangeLog
index e69de29bb..c80c00a49 100644
--- a/src/projectM-jack/ChangeLog
+++ b/src/projectM-jack/ChangeLog
@@ -0,0 +1 @@
+10/10/2007 FIRST RELEASE!
\ No newline at end of file
diff --git a/src/projectM-jack/INSTALL b/src/projectM-jack/INSTALL
index 855f060f5..7ffa23754 100644
--- a/src/projectM-jack/INSTALL
+++ b/src/projectM-jack/INSTALL
@@ -1,3 +1,7 @@
-If from CVS, run autogen.sh first.
+First install JACK and projectM 1.0
- ./configure, make, make install.
+cmake . -DCMAKE_BUILD_TYPE=RELEASE
+make
+make install
+
+You may need to type ccmake . and change the PREFIX if your system prefers /usr instead of /usr/local.
\ No newline at end of file
diff --git a/src/projectM-jack/README b/src/projectM-jack/README
index e69de29bb..92be3d365 100644
--- a/src/projectM-jack/README
+++ b/src/projectM-jack/README
@@ -0,0 +1 @@
+see INSTALL
\ No newline at end of file
diff --git a/src/projectM-jack/projectM-jack.cpp b/src/projectM-jack/projectM-jack.cpp
index 0fa75aa33..21c7323ac 100644
--- a/src/projectM-jack/projectM-jack.cpp
+++ b/src/projectM-jack/projectM-jack.cpp
@@ -23,10 +23,7 @@
#include
#include
#include
-#include
-#include
#include
-#include
#include "sdltoprojectM.h"
#include "ConfigFile.h"
@@ -225,7 +222,7 @@ process (jack_nframes_t nframes, void *arg)
//memcpy (out, in,sizeof (jack_default_audio_sample_t) * nframes);
- globalPM->beatDetect->pcm->addPCMfloat(in,nframes);
+ globalPM->pcm->addPCMfloat(in,nframes);
//printf("%x %f\n",nframes,in[128]);
diff --git a/src/projectM-libvisual/ChangeLog b/src/projectM-libvisual/ChangeLog
index acf242b64..c7c24183a 100644
--- a/src/projectM-libvisual/ChangeLog
+++ b/src/projectM-libvisual/ChangeLog
@@ -1,3 +1,8 @@
+2007-10-10 Peter Sperl
+
+ * Converted to cmake
+ * Updated to libprojectM 1.0
+
2006-01-31 Dennis Smit
* actor_projectM.c: Again API updates, and set the GL attribs.
diff --git a/src/projectM-libvisual/INSTALL b/src/projectM-libvisual/INSTALL
index d33e5e4bd..a6d03be57 100644
--- a/src/projectM-libvisual/INSTALL
+++ b/src/projectM-libvisual/INSTALL
@@ -1,5 +1,7 @@
First install libvisual-0.4 and projectM 1.0
-cmake .
+cmake . -DCMAKE_BUILD_TYPE=RELEASE
make
make install
+
+You may need to type ccmake . and change the PREFIX if your system prefers /usr instead of /usr/local.
\ No newline at end of file
diff --git a/src/projectM-libvisual/README b/src/projectM-libvisual/README
index 965dfd3d9..92be3d365 100644
--- a/src/projectM-libvisual/README
+++ b/src/projectM-libvisual/README
@@ -1,17 +1 @@
-Go to src/projectM and run make to compile the projectM library, then do the standard ./configure, make , make install here in lv-xmms.
-
-Configuration:
- ./configure
- To set a prefix use --prefix, other options can be seen by
- using ./configure --help
-
-Building:
- make
- This will compile the plugins
-
-Installing:
- make install
- This will install the plugins
-
-
-
+see INSTALL
\ No newline at end of file
diff --git a/src/projectM-xmms/INSTALL b/src/projectM-xmms/INSTALL
index f3846d995..60fa587db 100755
--- a/src/projectM-xmms/INSTALL
+++ b/src/projectM-xmms/INSTALL
@@ -1,229 +1,7 @@
-Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Install libprojectM 1.0 and XMMS, then:
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
- These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
+cmake . -DCMAKE_BUILD_TYPE=RELEASE
+make
+make install
+You may need to type ccmake . and change the PREFIX if your system prefers /usr instead of /usr/local.
\ No newline at end of file
diff --git a/src/projectM-xmms/NEWS b/src/projectM-xmms/NEWS
deleted file mode 100755
index e69de29bb..000000000
diff --git a/src/projectM-xmms/README b/src/projectM-xmms/README
index 09c126a3b..63c0eafed 100755
--- a/src/projectM-xmms/README
+++ b/src/projectM-xmms/README
@@ -1,81 +1,6 @@
-PROJECTM README FILE
---------------------------------
+see INSTALL
-QUICK OVERVIEW
-----------------------
-projectM started initially as a reimplementation of the Win32/DirectX based music visualizer Milkdrop under Linux/SDL/OpenGl/XMMS.
-It currently supports up to Milkdrop 1.04b presets, but there are some bugs with certain presets containing 1.04 features This project
-is 100% GPL'ed - feel free to use the code for whatever.
-
-WARNING
-------------------------
-This is a beta release. There some known bugs, and likely unknown ones.
-Please report bugs at the project web page at source forge: http://xmms-projectm.sourceforge.net
-
-INSTALL
-------------------------
-
-]1] Install SDL 1.3 branch
-
-(Un)fortunately there is a special feature in a development branch of SDL dubbed "branch_1_3_x" that projectM requires to handle
-different texture sizes and window resizing. This code is under CVS at SDL's sourceforge site, and has not been thoroughly
-tested. However, the developers have found it stable enough to merit installation. We provide a source tarball of a recent
-CVS version on our website (http://xmms-projectm.sourceforge.net).
-
-
-Once you have downloaded the tarball SDL-1.3.0.tar.gz do the following:
-
-As usual, run
-
-sh> ./configure
-
-followed by
-
-sh> make
-
-and as root
-
-sh> make install
-
-NOTE: this will install SDL in /usr/local, so when you compile projectM make sure that it finds SDL-1.3 and
-not SDL-1.2 (which is likely in /usr with most distributions). Hopefully the configure script will verify this
-automatically for you. To force SDL into /usr, type
-
-./configure --prefix=/usr
-
-followed by typical make and make install.
-
-[2] Install projectM
-
-If you haven't already, download the latest tarball release from http://xmms-projectm.sourceforge.net.
-
-Then run
-
-sh> ./configure
-
-followed by
-
-sh> make
-
-and as root
-
-sh> make install
-
-This will install projectM into XMMS's Visualization plugin directory. projectM's configuration
-files, including the default packaged presets are in /etc/projectM.
-
-Enable projectM by loading XMMS and pressing CTRL-v. This will bring up the vis plugin menu. Highlight
-projectM in the list (if it's not there something went wrong during installation), and click the enable
-button. Sit back and enjoy the trippy visuals...
-
-CONFIGURE
-----------
-
-edit /etc/projectM/config
-
-
-CREDIT / CONTACT
-------------------
+projectM config file now stored at ~/.projectM/config.inp
Main Developers: