From ba3319d90d546143d169b398166b457082ad21d4 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Mon, 8 Dec 2025 13:59:21 +0800 Subject: [PATCH 1/8] support hpmicro chips Signed-off-by: Zhihong Chen --- hw/bsp/hpmicro/boards/hpm6750evk2/board.c | 295 ++++++ hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake | 22 + hw/bsp/hpmicro/boards/hpm6750evk2/board.h | 105 +++ hw/bsp/hpmicro/boards/hpm6750evk2/board.mk | 16 + hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c | 862 ++++++++++++++++++ hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h | 89 ++ hw/bsp/hpmicro/family.c | 115 +++ hw/bsp/hpmicro/family.cmake | 131 +++ hw/bsp/hpmicro/family.mk | 76 ++ src/common/tusb_mcu.h | 12 + src/portable/chipidea/ci_hs/ci_hs_hpm.h | 54 ++ src/portable/chipidea/ci_hs/dcd_ci_hs.c | 14 +- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 8 + src/portable/ehci/ehci.c | 12 + src/tusb_option.h | 3 + tools/get_deps.py | 3 + 16 files changed, 1816 insertions(+), 1 deletion(-) create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/board.c create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/board.h create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/board.mk create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c create mode 100644 hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h create mode 100644 hw/bsp/hpmicro/family.c create mode 100644 hw/bsp/hpmicro/family.cmake create mode 100644 hw/bsp/hpmicro/family.mk create mode 100644 src/portable/chipidea/ci_hs/ci_hs_hpm.h diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/board.c b/hw/bsp/hpmicro/boards/hpm6750evk2/board.c new file mode 100644 index 000000000..c281356e3 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/board.c @@ -0,0 +1,295 @@ +/* + * Copyright (c) 2025 HPMicro + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#include "board.h" +#include "pinmux.h" +#include "hpm_pmp_drv.h" +#include "hpm_pllctl_drv.h" +#include "hpm_clock_drv.h" +#include "hpm_sysctl_drv.h" +#include "hpm_pcfg_drv.h" +#include "hpm_uart_drv.h" +#include "hpm_gpio_drv.h" + +/** + * @brief FLASH configuration option definitions: + * option[0]: + * [31:16] 0xfcf9 - FLASH configuration option tag + * [15:4] 0 - Reserved + * [3:0] option words (exclude option[0]) + * option[1]: + * [31:28] Flash probe type + * 0 - SFDP SDR / 1 - SFDP DDR + * 2 - 1-4-4 Read (0xEB, 24-bit address) / 3 - 1-2-2 Read(0xBB, 24-bit address) + * 4 - HyperFLASH 1.8V / 5 - HyperFLASH 3V + * 6 - OctaBus DDR (SPI -> OPI DDR) + * 8 - Xccela DDR (SPI -> OPI DDR) + * 10 - EcoXiP DDR (SPI -> OPI DDR) + * [27:24] Command Pads after Power-on Reset + * 0 - SPI / 1 - DPI / 2 - QPI / 3 - OPI + * [23:20] Command Pads after Configuring FLASH + * 0 - SPI / 1 - DPI / 2 - QPI / 3 - OPI + * [19:16] Quad Enable Sequence (for the device support SFDP 1.0 only) + * 0 - Not needed + * 1 - QE bit is at bit 6 in Status Register 1 + * 2 - QE bit is at bit1 in Status Register 2 + * 3 - QE bit is at bit7 in Status Register 2 + * 4 - QE bit is at bit1 in Status Register 2 and should be programmed by 0x31 + * [15:8] Dummy cycles + * 0 - Auto-probed / detected / default value + * Others - User specified value, for DDR read, the dummy cycles should be 2 * cycles on FLASH datasheet + * [7:4] Misc. + * 0 - Not used + * 1 - SPI mode + * 2 - Internal loopback + * 3 - External DQS + * [3:0] Frequency option + * 1 - 30MHz / 2 - 50MHz / 3 - 66MHz / 4 - 80MHz / 5 - 100MHz / 6 - 120MHz / 7 - 133MHz / 8 - 166MHz + * + * option[2] (Effective only if the bit[3:0] in option[0] > 1) + * [31:20] Reserved + * [19:16] IO voltage + * 0 - 3V / 1 - 1.8V + * [15:12] Pin group + * 0 - 1st group / 1 - 2nd group + * [11:8] Connection selection + * 0 - CA_CS0 / 1 - CB_CS0 / 2 - CA_CS0 + CB_CS0 (Two FLASH connected to CA and CB respectively) + * [7:0] Drive Strength + * 0 - Default value + * option[3] (Effective only if the bit[3:0] in option[0] > 2, required only for the QSPI NOR FLASH that not supports + * JESD216) + * [31:16] reserved + * [15:12] Sector Erase Command Option, not required here + * [11:8] Sector Size Option, not required here + * [7:0] Flash Size Option + * 0 - 4MB / 1 - 8MB / 2 - 16MB + */ +#if defined(FLASH_XIP) && FLASH_XIP +__attribute__ ((section(".nor_cfg_option"), used)) const uint32_t option[4] = {0xfcf90002, 0x00000007, 0xE, 0x0}; +#endif + +#if defined(FLASH_UF2) && FLASH_UF2 +ATTR_PLACE_AT(".uf2_signature") __attribute__((used)) const uint32_t uf2_signature = BOARD_UF2_SIGNATURE; +#endif + + +/* static function declarations */ +static void board_turnoff_rgb_led(void); +static void init_uart_pins(UART_Type *ptr); +static uint32_t board_init_uart_clock(UART_Type *ptr); +static void init_gpio_pins(void); +static void init_usb_pins(USB_Type *ptr); + +/* extern function definitions */ +void board_init_clock(void) +{ + uint32_t cpu0_freq = clock_get_frequency(clock_cpu0); + if (cpu0_freq == PLLCTL_SOC_PLL_REFCLK_FREQ) { + /* Configure the External OSC ramp-up time: ~9ms */ + pllctl_xtal_set_rampup_time(HPM_PLLCTL, 32UL * 1000UL * 9U); + + /* Select clock setting preset1 */ + sysctl_clock_set_preset(HPM_SYSCTL, sysctl_preset_1); + } + + /* Add clocks to group 0 */ + clock_add_to_group(clock_cpu0, 0); + clock_add_to_group(clock_mchtmr0, 0); + clock_add_to_group(clock_axi0, 0); + clock_add_to_group(clock_axi1, 0); + clock_add_to_group(clock_axi2, 0); + clock_add_to_group(clock_ahb, 0); + clock_add_to_group(clock_xdma, 0); + clock_add_to_group(clock_hdma, 0); + clock_add_to_group(clock_xpi0, 0); + clock_add_to_group(clock_xpi1, 0); + clock_add_to_group(clock_ram0, 0); + clock_add_to_group(clock_ram1, 0); + clock_add_to_group(clock_lmm0, 0); + clock_add_to_group(clock_lmm1, 0); + clock_add_to_group(clock_gpio, 0); + clock_add_to_group(clock_mot0, 0); + clock_add_to_group(clock_mot1, 0); + clock_add_to_group(clock_mot2, 0); + clock_add_to_group(clock_mot3, 0); + clock_add_to_group(clock_synt, 0); + clock_add_to_group(clock_ptpc, 0); + /* Connect Group0 to CPU0 */ + clock_connect_group_to_cpu(0, 0); + + /* Add clocks to Group1 */ + clock_add_to_group(clock_cpu1, 1); + clock_add_to_group(clock_mchtmr1, 1); + /* Connect Group1 to CPU1 */ + clock_connect_group_to_cpu(1, 1); + + /* Bump up DCDC voltage to 1275mv */ + pcfg_dcdc_set_voltage(HPM_PCFG, 1275); + pcfg_dcdc_switch_to_dcm_mode(HPM_PCFG); + + if (status_success != pllctl_init_int_pll_with_freq(HPM_PLLCTL, 0, BOARD_CPU_FREQ)) { + printf("Failed to set pll0_clk0 to %ldHz\n", BOARD_CPU_FREQ); + while (1) { + } + } + + clock_set_source_divider(clock_cpu0, clk_src_pll0_clk0, 1); + clock_set_source_divider(clock_cpu1, clk_src_pll0_clk0, 1); + clock_update_core_clock(); + + clock_set_source_divider(clock_ahb, clk_src_pll1_clk1, 2); /*200m hz*/ + clock_set_source_divider(clock_mchtmr0, clk_src_osc24m, 1); + clock_set_source_divider(clock_mchtmr1, clk_src_osc24m, 1); +} + +void board_init_pmp(void) +{ + uint32_t start_addr; + uint32_t end_addr; + uint32_t length; + pmp_entry_t pmp_entry[16] = {0}; + uint8_t index = 0; + + /* Init noncachable memory */ + extern uint32_t __noncacheable_start__[]; + extern uint32_t __noncacheable_end__[]; + start_addr = (uint32_t) __noncacheable_start__; + end_addr = (uint32_t) __noncacheable_end__; + length = end_addr - start_addr; + if (length > 0) { + /* Ensure the address and the length are power of 2 aligned */ + assert((length & (length - 1U)) == 0U); + assert((start_addr & (length - 1U)) == 0U); + pmp_entry[index].pmp_addr = PMP_NAPOT_ADDR(start_addr, length); + pmp_entry[index].pmp_cfg.val = PMP_CFG(READ_EN, WRITE_EN, EXECUTE_EN, ADDR_MATCH_NAPOT, REG_UNLOCK); + pmp_entry[index].pma_addr = PMA_NAPOT_ADDR(start_addr, length); + pmp_entry[index].pma_cfg.val = PMA_CFG(ADDR_MATCH_NAPOT, MEM_TYPE_MEM_NON_CACHE_BUF, AMO_EN); + index++; + } + + /* Init share memory */ + extern uint32_t __share_mem_start__[]; + extern uint32_t __share_mem_end__[]; + start_addr = (uint32_t)__share_mem_start__; + end_addr = (uint32_t)__share_mem_end__; + length = end_addr - start_addr; + if (length > 0) { + /* Ensure the address and the length are power of 2 aligned */ + assert((length & (length - 1U)) == 0U); + assert((start_addr & (length - 1U)) == 0U); + pmp_entry[index].pmp_addr = PMP_NAPOT_ADDR(start_addr, length); + pmp_entry[index].pmp_cfg.val = PMP_CFG(READ_EN, WRITE_EN, EXECUTE_EN, ADDR_MATCH_NAPOT, REG_UNLOCK); + pmp_entry[index].pma_addr = PMA_NAPOT_ADDR(start_addr, length); + pmp_entry[index].pma_cfg.val = PMA_CFG(ADDR_MATCH_NAPOT, MEM_TYPE_MEM_NON_CACHE_BUF, AMO_EN); + index++; + } + + pmp_config(&pmp_entry[0], index); +} + +void board_init_console(void) +{ + uart_config_t config = {0}; + uint32_t freq; + + /* uart needs to configure pin function before enabling clock, otherwise the level change of + uart rx pin when configuring pin function will cause a wrong data to be received. + And a uart rx dma request will be generated by default uart fifo dma trigger level. */ + init_uart_pins((UART_Type *) BOARD_CONSOLE_UART_BASE); + + freq = board_init_uart_clock((UART_Type *)BOARD_CONSOLE_UART_BASE); + + uart_default_config((UART_Type *)BOARD_CONSOLE_UART_BASE, &config); + config.src_freq_in_hz = freq; + config.baudrate = BOARD_CONSOLE_UART_BAUDRATE; + uart_init((UART_Type *)BOARD_CONSOLE_UART_BASE, &config); +} + +void board_init_gpio_pins(void) +{ + init_gpio_pins(); +} + +void board_init_led_pins(void) +{ + board_turnoff_rgb_led(); + init_led_pins_as_gpio(); + gpio_set_pin_output_with_initial(BOARD_R_GPIO_CTRL, BOARD_R_GPIO_INDEX, BOARD_R_GPIO_PIN, BOARD_LED_OFF_LEVEL); + gpio_set_pin_output_with_initial(BOARD_G_GPIO_CTRL, BOARD_G_GPIO_INDEX, BOARD_G_GPIO_PIN, BOARD_LED_OFF_LEVEL); + gpio_set_pin_output_with_initial(BOARD_B_GPIO_CTRL, BOARD_B_GPIO_INDEX, BOARD_B_GPIO_PIN, BOARD_LED_OFF_LEVEL); +} + +void board_init_usb(USB_Type *ptr) +{ + clock_name_t usb_clk = (ptr == HPM_USB0) ? clock_usb0 : clock_usb1; + + init_usb_pins(ptr); + clock_add_to_group(usb_clk, 0); +} + +/* static function definitions */ +static void board_turnoff_rgb_led(void) +{ + uint32_t pad_ctl = IOC_PAD_PAD_CTL_PE_SET(1) | IOC_PAD_PAD_CTL_PS_SET(BOARD_LED_OFF_LEVEL); + HPM_IOC->PAD[IOC_PAD_PB11].FUNC_CTL = IOC_PB11_FUNC_CTL_GPIO_B_11; + HPM_IOC->PAD[IOC_PAD_PB12].FUNC_CTL = IOC_PB12_FUNC_CTL_GPIO_B_12; + HPM_IOC->PAD[IOC_PAD_PB13].FUNC_CTL = IOC_PB13_FUNC_CTL_GPIO_B_13; + + HPM_IOC->PAD[IOC_PAD_PB11].PAD_CTL = pad_ctl; + HPM_IOC->PAD[IOC_PAD_PB12].PAD_CTL = pad_ctl; + HPM_IOC->PAD[IOC_PAD_PB13].PAD_CTL = pad_ctl; +} + +static void init_uart_pins(UART_Type *ptr) +{ + if (ptr == HPM_UART0) { + init_uart0_pins(); + } else if (ptr == HPM_UART2) { + init_uart2_pins(); + } else if (ptr == HPM_UART13) { + init_uart13_pins(); + } else if (ptr == HPM_PUART) { + init_puart_pins(); + } +} + +static uint32_t board_init_uart_clock(UART_Type *ptr) +{ + uint32_t freq = 0U; + if (ptr == HPM_UART0) { + clock_add_to_group(clock_uart0, 0); + freq = clock_get_frequency(clock_uart0); + } else if (ptr == HPM_UART6) { + clock_add_to_group(clock_uart6, 0); + freq = clock_get_frequency(clock_uart6); + } else if (ptr == HPM_UART13) { + clock_add_to_group(clock_uart13, 0); + freq = clock_get_frequency(clock_uart13); + } else if (ptr == HPM_UART14) { + clock_add_to_group(clock_uart14, 0); + freq = clock_get_frequency(clock_uart14); + } else { + /* Not supported */ + } + return freq; +} + +static void init_gpio_pins(void) +{ + init_gpio_pins_with_pull_up(); +#ifdef USING_GPIO0_FOR_GPIOZ + init_gpio_pins_using_gpio0(); +#endif +} + +static void init_usb_pins(USB_Type *ptr) +{ + if (ptr == HPM_USB0) { + init_usb0_pins(); + } else if (ptr == HPM_USB1) { + init_usb1_pins(); + } +} diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake b/hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake new file mode 100644 index 000000000..b15911cb5 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/board.cmake @@ -0,0 +1,22 @@ +set(MCU_VARIANT HPM6750xVMx) +set(JLINK_DEVICE ${MCU_VARIANT}) + +set(JLINK_IF jtag) + +set(HPM_SOC ${SDK_DIR}/soc/HPM6700/HPM6750) +set(HPM_IP_REGS ${SDK_DIR}/soc/HPM6700/ip) + +set(BOARD_FLASH_SIZE 16M) +set(BOARD_STACK_SIZE 16K) +set(BOARD_HEAP_SIZE 16K) + +set(HPM_PLLCTL_DRV_FILE hpm_pllctl_drv.c) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + BOARD_TUD_RHPORT=0 + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + BOARD_TUH_RHPORT=1 + BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) +endfunction() diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/board.h b/hw/bsp/hpmicro/boards/hpm6750evk2/board.h new file mode 100644 index 000000000..0636a4722 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/board.h @@ -0,0 +1,105 @@ +/* + * Copyright (c) 2021-2025 HPMicro + * + * SPDX-License-Identifier: BSD-3-Clause + * + */ + +#ifndef _HPM_BOARD_H +#define _HPM_BOARD_H + +#include +#include "hpm_common.h" +#include "hpm_soc.h" +#include "hpm_soc_feature.h" +#include "pinmux.h" + +#define BOARD_NAME "hpm6750evk2" + +#ifndef BOARD_RUNNING_CORE +#define BOARD_RUNNING_CORE HPM_CORE0 +#endif + +#define BOARD_CPU_FREQ (816000000UL) + +/* console section */ +#if BOARD_RUNNING_CORE == HPM_CORE0 + #define BOARD_CONSOLE_UART_BASE HPM_UART0 + #define BOARD_CONSOLE_UART_CLK_NAME clock_uart0 + #define BOARD_CONSOLE_UART_IRQ IRQn_UART0 + #define BOARD_CONSOLE_UART_TX_DMA_REQ HPM_DMA_SRC_UART0_TX + #define BOARD_CONSOLE_UART_RX_DMA_REQ HPM_DMA_SRC_UART0_RX +#else + #define BOARD_CONSOLE_UART_BASE HPM_UART13 + #define BOARD_CONSOLE_UART_CLK_NAME clock_uart13 + #define BOARD_CONSOLE_UART_IRQ IRQn_UART13 + #define BOARD_CONSOLE_UART_TX_DMA_REQ HPM_DMA_SRC_UART13_TX + #define BOARD_CONSOLE_UART_RX_DMA_REQ HPM_DMA_SRC_UART13_RX +#endif + +#define BOARD_CONSOLE_UART_BAUDRATE (115200UL) + +/* sdram section */ +#define BOARD_SDRAM_ADDRESS (0x40000000UL) +#define BOARD_SDRAM_SIZE (32 * SIZE_1MB) +#define BOARD_SDRAM_CS FEMC_SDRAM_CS0 +#define BOARD_SDRAM_PORT_SIZE FEMC_SDRAM_PORT_SIZE_32_BITS +#define BOARD_SDRAM_COLUMN_ADDR_BITS FEMC_SDRAM_COLUMN_ADDR_9_BITS +#define BOARD_SDRAM_REFRESH_COUNT (8192UL) +#define BOARD_SDRAM_REFRESH_IN_MS (64UL) + +#define BOARD_FLASH_BASE_ADDRESS (0x80000000UL) +#define BOARD_FLASH_SIZE (16 << 20) + +/* gpio section */ +#define BOARD_R_GPIO_CTRL HPM_GPIO0 +#define BOARD_R_GPIO_INDEX GPIO_DI_GPIOB +#define BOARD_R_GPIO_PIN 11 +#define BOARD_G_GPIO_CTRL HPM_GPIO0 +#define BOARD_G_GPIO_INDEX GPIO_DI_GPIOB +#define BOARD_G_GPIO_PIN 12 +#define BOARD_B_GPIO_CTRL HPM_GPIO0 +#define BOARD_B_GPIO_INDEX GPIO_DI_GPIOB +#define BOARD_B_GPIO_PIN 13 + +#define BOARD_LED_GPIO_CTRL HPM_GPIO0 + +#define BOARD_LED_GPIO_INDEX GPIO_DI_GPIOB +#define BOARD_LED_GPIO_PIN 12 +#define BOARD_LED_OFF_LEVEL 0 +#define BOARD_LED_ON_LEVEL 1 + +#define BOARD_LED_TOGGLE_RGB 1 + +#define BOARD_APP_GPIO_INDEX GPIO_DI_GPIOZ +#define BOARD_APP_GPIO_PIN 2 +#define BOARD_BUTTON_PRESSED_VALUE 0 + +#define USING_GPIO0_FOR_GPIOZ +#ifndef USING_GPIO0_FOR_GPIOZ +#define BOARD_APP_GPIO_CTRL HPM_BGPIO +#define BOARD_APP_GPIO_IRQ IRQn_BGPIO +#else +#define BOARD_APP_GPIO_CTRL HPM_GPIO0 +#define BOARD_APP_GPIO_IRQ IRQn_GPIO0_Z +#endif + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + + +void board_init_clock(void); +void board_init_pmp(void); +void board_init_console(void); +void board_init_gpio_pins(void); +void board_init_led_pins(void); +void board_init_usb(USB_Type *ptr); +void board_print_banner(void); +void board_print_clock_freq(void); + + +#if defined(__cplusplus) +} +#endif /* __cplusplus */ +#endif /* _HPM_BOARD_H */ diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/board.mk b/hw/bsp/hpmicro/boards/hpm6750evk2/board.mk new file mode 100644 index 000000000..26981ce28 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/board.mk @@ -0,0 +1,16 @@ +MCU_VARIANT = HPM6750xVMx +JLINK_DEVICE = ${MCU_VARIANT} + +JLINK_IF = jtag + +HPM_SOC = $(SDK_DIR)/soc/HPM6700/HPM6750 +HPM_IP_REGS = $(SDK_DIR)/soc/HPM6700/ip + +BOARD_FLASH_SIZE = 16M +BOARD_STACK_SIZE = 16K +BOARD_HEAP_SIZE = 16K + +BOARD_TUD_RHPORT = 0 +BOARD_TUH_RHPORT = 1 + +HPM_PLLCTL_DRV_FILE = hpm_pllctl_drv.c diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c b/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c new file mode 100644 index 000000000..7554e3a76 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.c @@ -0,0 +1,862 @@ + +/* + * Copyright (c) 2025 HPMicro + * + * SPDX-License-Identifier: BSD-3-Clause + * + * + * Automatically generated by HPM Pinmux Tool + * + * + * Note: + * PY and PZ IOs: if any SOC pin function needs to be routed to these IOs, + * besides of IOC, PIOC/BIOC needs to be configured SOC_GPIO_X_xx, so that + * expected SoC function can be enabled on these IOs. + */ + +#include "pinmux.h" +#include "board.h" +#include "hpm_trgm_drv.h" + + +/* PY port IO needs to configure PIOC as well */ +void init_uart0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PY07].FUNC_CTL = IOC_PY07_FUNC_CTL_UART0_RXD; + HPM_PIOC->PAD[IOC_PAD_PY07].FUNC_CTL = PIOC_PY07_FUNC_CTL_SOC_PY_07; + + HPM_IOC->PAD[IOC_PAD_PY06].FUNC_CTL = IOC_PY06_FUNC_CTL_UART0_TXD; + HPM_PIOC->PAD[IOC_PAD_PY06].FUNC_CTL = PIOC_PY06_FUNC_CTL_SOC_PY_06; +} + +void init_uart2_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE16].FUNC_CTL = IOC_PE16_FUNC_CTL_UART2_TXD; + + HPM_IOC->PAD[IOC_PAD_PE21].FUNC_CTL = IOC_PE21_FUNC_CTL_UART2_RXD; +} + +/* PZ port IO needs to configure BIOC as well */ +void init_uart13_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ08].FUNC_CTL = IOC_PZ08_FUNC_CTL_UART13_RXD; + HPM_BIOC->PAD[IOC_PAD_PZ08].FUNC_CTL = BIOC_PZ08_FUNC_CTL_SOC_PZ_08; + + HPM_IOC->PAD[IOC_PAD_PZ09].FUNC_CTL = IOC_PZ09_FUNC_CTL_UART13_TXD; + HPM_BIOC->PAD[IOC_PAD_PZ09].FUNC_CTL = BIOC_PZ09_FUNC_CTL_SOC_PZ_09; +} + +void init_puart_pins(void) +{ + HPM_PIOC->PAD[IOC_PAD_PY06].FUNC_CTL = PIOC_PY06_FUNC_CTL_PUART_TXD; + + HPM_PIOC->PAD[IOC_PAD_PY07].FUNC_CTL = PIOC_PY07_FUNC_CTL_PUART_RXD; +} + +/* + * PZ port IO needs to configure BIOC as well. + * PZ08 and PZ09 need pull up. + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_uart13_pins_as_gpio(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ08].FUNC_CTL = IOC_PZ08_FUNC_CTL_GPIO_Z_08; + HPM_BIOC->PAD[IOC_PAD_PZ08].FUNC_CTL = BIOC_PZ08_FUNC_CTL_SOC_PZ_08; + HPM_IOC->PAD[IOC_PAD_PZ08].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); + + HPM_IOC->PAD[IOC_PAD_PZ09].FUNC_CTL = IOC_PZ09_FUNC_CTL_GPIO_Z_09; + HPM_BIOC->PAD[IOC_PAD_PZ09].FUNC_CTL = BIOC_PZ09_FUNC_CTL_SOC_PZ_09; +} + +void init_lcd0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PB03].FUNC_CTL = IOC_PB03_FUNC_CTL_DIS0_R_0; + + HPM_IOC->PAD[IOC_PAD_PB04].FUNC_CTL = IOC_PB04_FUNC_CTL_DIS0_R_1; + + HPM_IOC->PAD[IOC_PAD_PB00].FUNC_CTL = IOC_PB00_FUNC_CTL_DIS0_R_2; + + HPM_IOC->PAD[IOC_PAD_PA31].FUNC_CTL = IOC_PA31_FUNC_CTL_DIS0_R_3; + + HPM_IOC->PAD[IOC_PAD_PA26].FUNC_CTL = IOC_PA26_FUNC_CTL_DIS0_R_4; + + HPM_IOC->PAD[IOC_PAD_PA21].FUNC_CTL = IOC_PA21_FUNC_CTL_DIS0_R_5; + + HPM_IOC->PAD[IOC_PAD_PA27].FUNC_CTL = IOC_PA27_FUNC_CTL_DIS0_R_6; + + HPM_IOC->PAD[IOC_PAD_PA28].FUNC_CTL = IOC_PA28_FUNC_CTL_DIS0_R_7; + + HPM_IOC->PAD[IOC_PAD_PB06].FUNC_CTL = IOC_PB06_FUNC_CTL_DIS0_G_0; + + HPM_IOC->PAD[IOC_PAD_PB01].FUNC_CTL = IOC_PB01_FUNC_CTL_DIS0_G_1; + + HPM_IOC->PAD[IOC_PAD_PA22].FUNC_CTL = IOC_PA22_FUNC_CTL_DIS0_G_2; + + HPM_IOC->PAD[IOC_PAD_PA23].FUNC_CTL = IOC_PA23_FUNC_CTL_DIS0_G_3; + + HPM_IOC->PAD[IOC_PAD_PA29].FUNC_CTL = IOC_PA29_FUNC_CTL_DIS0_G_4; + + HPM_IOC->PAD[IOC_PAD_PA24].FUNC_CTL = IOC_PA24_FUNC_CTL_DIS0_G_5; + + HPM_IOC->PAD[IOC_PAD_PA30].FUNC_CTL = IOC_PA30_FUNC_CTL_DIS0_G_6; + + HPM_IOC->PAD[IOC_PAD_PA25].FUNC_CTL = IOC_PA25_FUNC_CTL_DIS0_G_7; + + HPM_IOC->PAD[IOC_PAD_PB05].FUNC_CTL = IOC_PB05_FUNC_CTL_DIS0_B_0; + + HPM_IOC->PAD[IOC_PAD_PB07].FUNC_CTL = IOC_PB07_FUNC_CTL_DIS0_B_1; + + HPM_IOC->PAD[IOC_PAD_PB02].FUNC_CTL = IOC_PB02_FUNC_CTL_DIS0_B_2; + + HPM_IOC->PAD[IOC_PAD_PA16].FUNC_CTL = IOC_PA16_FUNC_CTL_DIS0_B_3; + + HPM_IOC->PAD[IOC_PAD_PA12].FUNC_CTL = IOC_PA12_FUNC_CTL_DIS0_B_4; + + HPM_IOC->PAD[IOC_PAD_PA17].FUNC_CTL = IOC_PA17_FUNC_CTL_DIS0_B_5; + + HPM_IOC->PAD[IOC_PAD_PA13].FUNC_CTL = IOC_PA13_FUNC_CTL_DIS0_B_6; + + HPM_IOC->PAD[IOC_PAD_PA18].FUNC_CTL = IOC_PA18_FUNC_CTL_DIS0_B_7; + + HPM_IOC->PAD[IOC_PAD_PA20].FUNC_CTL = IOC_PA20_FUNC_CTL_DIS0_CLK; + + HPM_IOC->PAD[IOC_PAD_PA15].FUNC_CTL = IOC_PA15_FUNC_CTL_DIS0_EN; + + HPM_IOC->PAD[IOC_PAD_PA19].FUNC_CTL = IOC_PA19_FUNC_CTL_DIS0_HSYNC; + + HPM_IOC->PAD[IOC_PAD_PA14].FUNC_CTL = IOC_PA14_FUNC_CTL_DIS0_VSYNC; + + /* PWM */ + HPM_IOC->PAD[IOC_PAD_PB10].FUNC_CTL = IOC_PB10_FUNC_CTL_GPIO_B_10; + + /* RST */ + HPM_IOC->PAD[IOC_PAD_PB16].FUNC_CTL = IOC_PB16_FUNC_CTL_GPIO_B_16; + + HPM_IOC->PAD[IOC_PAD_PZ00].FUNC_CTL = IOC_PZ00_FUNC_CTL_GPIO_Z_00; + HPM_BIOC->PAD[IOC_PAD_PZ00].FUNC_CTL = BIOC_PZ00_FUNC_CTL_SOC_PZ_00; + HPM_IOC->PAD[IOC_PAD_PZ00].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +/* + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_cap_pins(void) +{ + /* CAP_INT */ + HPM_IOC->PAD[IOC_PAD_PB08].FUNC_CTL = IOC_PB08_FUNC_CTL_GPIO_B_08; + HPM_IOC->PAD[IOC_PAD_PB08].PAD_CTL = IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(1); + + /* CAP_RST */ + HPM_IOC->PAD[IOC_PAD_PB09].FUNC_CTL = IOC_PB09_FUNC_CTL_GPIO_B_09; + HPM_IOC->PAD[IOC_PAD_PB09].PAD_CTL = IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(1); +} + +/* PZ port IO needs to configure BIOC as well */ +void init_i2c0_pins_as_gpio(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ11].FUNC_CTL = IOC_PZ11_FUNC_CTL_GPIO_Z_11; + HPM_BIOC->PAD[IOC_PAD_PZ11].FUNC_CTL = BIOC_PZ11_FUNC_CTL_SOC_PZ_11; + + HPM_IOC->PAD[IOC_PAD_PZ10].FUNC_CTL = IOC_PZ10_FUNC_CTL_GPIO_Z_10; + HPM_BIOC->PAD[IOC_PAD_PZ10].FUNC_CTL = BIOC_PZ10_FUNC_CTL_SOC_PZ_10; +} + +/* PZ port IO needs to configure BIOC as well */ +void init_i2c0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ11].FUNC_CTL = IOC_PZ11_FUNC_CTL_I2C0_SCL | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_BIOC->PAD[IOC_PAD_PZ11].FUNC_CTL = BIOC_PZ11_FUNC_CTL_SOC_PZ_11; + HPM_IOC->PAD[IOC_PAD_PZ11].PAD_CTL = IOC_PAD_PAD_CTL_OD_SET(1); + + HPM_IOC->PAD[IOC_PAD_PZ10].FUNC_CTL = IOC_PZ10_FUNC_CTL_I2C0_SDA | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_BIOC->PAD[IOC_PAD_PZ10].FUNC_CTL = BIOC_PZ10_FUNC_CTL_SOC_PZ_10; + HPM_IOC->PAD[IOC_PAD_PZ10].PAD_CTL = IOC_PAD_PAD_CTL_OD_SET(1); +} + +void init_femc_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PC01].FUNC_CTL = IOC_PC01_FUNC_CTL_FEMC_DQ_16; + + HPM_IOC->PAD[IOC_PAD_PC00].FUNC_CTL = IOC_PC00_FUNC_CTL_FEMC_DQ_17; + + HPM_IOC->PAD[IOC_PAD_PB31].FUNC_CTL = IOC_PB31_FUNC_CTL_FEMC_DQ_18; + + HPM_IOC->PAD[IOC_PAD_PB30].FUNC_CTL = IOC_PB30_FUNC_CTL_FEMC_DQ_30; + + HPM_IOC->PAD[IOC_PAD_PB29].FUNC_CTL = IOC_PB29_FUNC_CTL_FEMC_DQ_31; + + HPM_IOC->PAD[IOC_PAD_PB28].FUNC_CTL = IOC_PB28_FUNC_CTL_FEMC_DQ_19; + + HPM_IOC->PAD[IOC_PAD_PB27].FUNC_CTL = IOC_PB27_FUNC_CTL_FEMC_DQ_20; + + HPM_IOC->PAD[IOC_PAD_PB26].FUNC_CTL = IOC_PB26_FUNC_CTL_FEMC_DQ_21; + + HPM_IOC->PAD[IOC_PAD_PB25].FUNC_CTL = IOC_PB25_FUNC_CTL_FEMC_DQ_28; + + HPM_IOC->PAD[IOC_PAD_PB24].FUNC_CTL = IOC_PB24_FUNC_CTL_FEMC_DQ_29; + + HPM_IOC->PAD[IOC_PAD_PB23].FUNC_CTL = IOC_PB23_FUNC_CTL_FEMC_DQ_22; + + HPM_IOC->PAD[IOC_PAD_PB22].FUNC_CTL = IOC_PB22_FUNC_CTL_FEMC_DQ_26; + + HPM_IOC->PAD[IOC_PAD_PB21].FUNC_CTL = IOC_PB21_FUNC_CTL_FEMC_DQ_27; + + HPM_IOC->PAD[IOC_PAD_PB20].FUNC_CTL = IOC_PB20_FUNC_CTL_FEMC_DQ_23; + + HPM_IOC->PAD[IOC_PAD_PB19].FUNC_CTL = IOC_PB19_FUNC_CTL_FEMC_DQ_24; + + HPM_IOC->PAD[IOC_PAD_PB18].FUNC_CTL = IOC_PB18_FUNC_CTL_FEMC_DQ_25; + + HPM_IOC->PAD[IOC_PAD_PD13].FUNC_CTL = IOC_PD13_FUNC_CTL_FEMC_DQ_14; + + HPM_IOC->PAD[IOC_PAD_PD12].FUNC_CTL = IOC_PD12_FUNC_CTL_FEMC_DQ_15; + + HPM_IOC->PAD[IOC_PAD_PD10].FUNC_CTL = IOC_PD10_FUNC_CTL_FEMC_DQ_12; + + HPM_IOC->PAD[IOC_PAD_PD09].FUNC_CTL = IOC_PD09_FUNC_CTL_FEMC_DQ_13; + + HPM_IOC->PAD[IOC_PAD_PD08].FUNC_CTL = IOC_PD08_FUNC_CTL_FEMC_DQ_00; + + HPM_IOC->PAD[IOC_PAD_PD07].FUNC_CTL = IOC_PD07_FUNC_CTL_FEMC_DQ_10; + + HPM_IOC->PAD[IOC_PAD_PD06].FUNC_CTL = IOC_PD06_FUNC_CTL_FEMC_DQ_11; + + HPM_IOC->PAD[IOC_PAD_PD05].FUNC_CTL = IOC_PD05_FUNC_CTL_FEMC_DQ_01; + + HPM_IOC->PAD[IOC_PAD_PD04].FUNC_CTL = IOC_PD04_FUNC_CTL_FEMC_DQ_08; + + HPM_IOC->PAD[IOC_PAD_PD03].FUNC_CTL = IOC_PD03_FUNC_CTL_FEMC_DQ_09; + + HPM_IOC->PAD[IOC_PAD_PD02].FUNC_CTL = IOC_PD02_FUNC_CTL_FEMC_DQ_04; + + HPM_IOC->PAD[IOC_PAD_PD01].FUNC_CTL = IOC_PD01_FUNC_CTL_FEMC_DQ_03; + + HPM_IOC->PAD[IOC_PAD_PD00].FUNC_CTL = IOC_PD00_FUNC_CTL_FEMC_DQ_02; + + HPM_IOC->PAD[IOC_PAD_PC29].FUNC_CTL = IOC_PC29_FUNC_CTL_FEMC_DQ_07; + + HPM_IOC->PAD[IOC_PAD_PC28].FUNC_CTL = IOC_PC28_FUNC_CTL_FEMC_DQ_06; + + HPM_IOC->PAD[IOC_PAD_PC27].FUNC_CTL = IOC_PC27_FUNC_CTL_FEMC_DQ_05; + + /* SRAM #WE */ + HPM_IOC->PAD[IOC_PAD_PC21].FUNC_CTL = IOC_PC21_FUNC_CTL_FEMC_A_11; + + HPM_IOC->PAD[IOC_PAD_PC17].FUNC_CTL = IOC_PC17_FUNC_CTL_FEMC_A_09; + + HPM_IOC->PAD[IOC_PAD_PC15].FUNC_CTL = IOC_PC15_FUNC_CTL_FEMC_A_10; + + HPM_IOC->PAD[IOC_PAD_PC12].FUNC_CTL = IOC_PC12_FUNC_CTL_FEMC_A_08; + + HPM_IOC->PAD[IOC_PAD_PC11].FUNC_CTL = IOC_PC11_FUNC_CTL_FEMC_A_07; + + HPM_IOC->PAD[IOC_PAD_PC10].FUNC_CTL = IOC_PC10_FUNC_CTL_FEMC_A_06; + + HPM_IOC->PAD[IOC_PAD_PC09].FUNC_CTL = IOC_PC09_FUNC_CTL_FEMC_A_01; + + HPM_IOC->PAD[IOC_PAD_PC08].FUNC_CTL = IOC_PC08_FUNC_CTL_FEMC_A_00; + + HPM_IOC->PAD[IOC_PAD_PC07].FUNC_CTL = IOC_PC07_FUNC_CTL_FEMC_A_05; + + HPM_IOC->PAD[IOC_PAD_PC06].FUNC_CTL = IOC_PC06_FUNC_CTL_FEMC_A_04; + + HPM_IOC->PAD[IOC_PAD_PC05].FUNC_CTL = IOC_PC05_FUNC_CTL_FEMC_A_03; + + HPM_IOC->PAD[IOC_PAD_PC04].FUNC_CTL = IOC_PC04_FUNC_CTL_FEMC_A_02; + + /* SRAM #ADV */ + HPM_IOC->PAD[IOC_PAD_PC14].FUNC_CTL = IOC_PC14_FUNC_CTL_FEMC_BA1; + + HPM_IOC->PAD[IOC_PAD_PC13].FUNC_CTL = IOC_PC13_FUNC_CTL_FEMC_BA0; + + HPM_IOC->PAD[IOC_PAD_PC16].FUNC_CTL = IOC_PC16_FUNC_CTL_FEMC_DQS | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + + HPM_IOC->PAD[IOC_PAD_PC26].FUNC_CTL = IOC_PC26_FUNC_CTL_FEMC_CLK; + + HPM_IOC->PAD[IOC_PAD_PC25].FUNC_CTL = IOC_PC25_FUNC_CTL_FEMC_CKE; + + HPM_IOC->PAD[IOC_PAD_PC19].FUNC_CTL = IOC_PC19_FUNC_CTL_FEMC_CS_0; + + HPM_IOC->PAD[IOC_PAD_PC18].FUNC_CTL = IOC_PC18_FUNC_CTL_FEMC_RAS; + + HPM_IOC->PAD[IOC_PAD_PC23].FUNC_CTL = IOC_PC23_FUNC_CTL_FEMC_CAS; + + HPM_IOC->PAD[IOC_PAD_PC24].FUNC_CTL = IOC_PC24_FUNC_CTL_FEMC_WE; + + /* SRAM #LB */ + HPM_IOC->PAD[IOC_PAD_PC30].FUNC_CTL = IOC_PC30_FUNC_CTL_FEMC_DM_0; + + /* SRAM #UB */ + HPM_IOC->PAD[IOC_PAD_PC31].FUNC_CTL = IOC_PC31_FUNC_CTL_FEMC_DM_1; + + HPM_IOC->PAD[IOC_PAD_PC02].FUNC_CTL = IOC_PC02_FUNC_CTL_FEMC_DM_2; + + HPM_IOC->PAD[IOC_PAD_PC03].FUNC_CTL = IOC_PC03_FUNC_CTL_FEMC_DM_3; + + /* SRAM #CE */ + HPM_IOC->PAD[IOC_PAD_PC20].FUNC_CTL = IOC_PC20_FUNC_CTL_FEMC_CS_1; + + /* SRAM #OE */ + HPM_IOC->PAD[IOC_PAD_PC22].FUNC_CTL = IOC_PC22_FUNC_CTL_FEMC_A_12; +} + +/* + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_gpio_pins_with_pull_up(void) +{ + HPM_IOC->PAD[IOC_PAD_PB12].FUNC_CTL = IOC_PB12_FUNC_CTL_GPIO_B_12; + HPM_IOC->PAD[IOC_PAD_PB12].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(0); +} + +/* + * PZ port IO needs to configure BIOC as well. + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_gpio_pins_using_gpio0(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ02].FUNC_CTL = IOC_PZ02_FUNC_CTL_GPIO_Z_02; + HPM_BIOC->PAD[IOC_PAD_PZ02].FUNC_CTL = BIOC_PZ02_FUNC_CTL_SOC_PZ_02; + HPM_IOC->PAD[IOC_PAD_PZ02].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +/* + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_spi2_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE31].FUNC_CTL = IOC_PE31_FUNC_CTL_SPI2_CSN; + HPM_IOC->PAD[IOC_PAD_PE31].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); + + HPM_IOC->PAD[IOC_PAD_PE30].FUNC_CTL = IOC_PE30_FUNC_CTL_SPI2_MOSI; + HPM_IOC->PAD[IOC_PAD_PE30].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE27].FUNC_CTL = IOC_PE27_FUNC_CTL_SPI2_SCLK | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PE27].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE28].FUNC_CTL = IOC_PE28_FUNC_CTL_SPI2_MISO; + HPM_IOC->PAD[IOC_PAD_PE28].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; +} + +/* + * Errata: E00029：IOC PAD_CTL register write restrictions. + * When the PE bit is 1, bit [3] must be set to 1, + * and DS can only be selected as 0b001 (low drive strength) or 0b110 (high drive strength). + */ +void init_spi2_pins_with_gpio_as_cs(void) +{ + HPM_IOC->PAD[IOC_PAD_PE27].FUNC_CTL = IOC_PE27_FUNC_CTL_SPI2_SCLK | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PE27].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE28].FUNC_CTL = IOC_PE28_FUNC_CTL_SPI2_MISO; + HPM_IOC->PAD[IOC_PAD_PE28].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE30].FUNC_CTL = IOC_PE30_FUNC_CTL_SPI2_MOSI; + HPM_IOC->PAD[IOC_PAD_PE30].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08; + + HPM_IOC->PAD[IOC_PAD_PE31].FUNC_CTL = IOC_PE31_FUNC_CTL_GPIO_E_31; + HPM_IOC->PAD[IOC_PAD_PE31].PAD_CTL = IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_gptmr3_pins(void) +{ + /* TMR3 compare 1 */ + HPM_IOC->PAD[IOC_PAD_PE24].FUNC_CTL = IOC_PE24_FUNC_CTL_GPTMR3_COMP_1; +} + +void init_gptmr4_pins(void) +{ + /* TMR4 capture 1 */ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PE25_FUNC_CTL_GPTMR4_CAPT_1; +} + +void init_gptmr5_pins(void) +{ + /* TMR5 compare 2 */ + HPM_IOC->PAD[IOC_PAD_PD24].FUNC_CTL = IOC_PD24_FUNC_CTL_TRGM2_P_10; + + /* TMR5 compare 3 */ + HPM_IOC->PAD[IOC_PAD_PD23].FUNC_CTL = IOC_PD23_FUNC_CTL_TRGM2_P_11; + + trgm_output_t trgm2_io_config0 = {0}; + trgm2_io_config0.invert = 0; + trgm2_io_config0.type = trgm_output_same_as_input; + trgm2_io_config0.input = HPM_TRGM2_INPUT_SRC_GPTMR5_OUT2; + trgm_output_config(HPM_TRGM2, HPM_TRGM2_OUTPUT_SRC_TRGM2_P10, &trgm2_io_config0); + + trgm_enable_io_output(HPM_TRGM2, 1 << 10); + + trgm_output_t trgm2_io_config1 = {0}; + trgm2_io_config1.invert = 0; + trgm2_io_config1.type = trgm_output_same_as_input; + trgm2_io_config1.input = HPM_TRGM2_INPUT_SRC_GPTMR5_OUT3; + trgm_output_config(HPM_TRGM2, HPM_TRGM2_OUTPUT_SRC_TRGM2_P11, &trgm2_io_config1); + + trgm_enable_io_output(HPM_TRGM2, 1 << 11); +} + +void init_hall_trgm_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PD16].FUNC_CTL = IOC_PD16_FUNC_CTL_TRGM2_P_06; + + HPM_IOC->PAD[IOC_PAD_PD20].FUNC_CTL = IOC_PD20_FUNC_CTL_TRGM2_P_07; + + HPM_IOC->PAD[IOC_PAD_PD25].FUNC_CTL = IOC_PD25_FUNC_CTL_TRGM2_P_08; +} + +void init_qei_trgm_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PD19].FUNC_CTL = IOC_PD19_FUNC_CTL_TRGM2_P_09; + + HPM_IOC->PAD[IOC_PAD_PD24].FUNC_CTL = IOC_PD24_FUNC_CTL_TRGM2_P_10; +} + +void init_i2s0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF02].FUNC_CTL = IOC_PF02_FUNC_CTL_I2S0_RXD_2; + + HPM_IOC->PAD[IOC_PAD_PF03].FUNC_CTL = IOC_PF03_FUNC_CTL_I2S0_MCLK; + + HPM_IOC->PAD[IOC_PAD_PF04].FUNC_CTL = IOC_PF04_FUNC_CTL_I2S0_TXD_2; + + HPM_IOC->PAD[IOC_PAD_PF06].FUNC_CTL = IOC_PF06_FUNC_CTL_I2S0_BCLK; + + HPM_IOC->PAD[IOC_PAD_PF09].FUNC_CTL = IOC_PF09_FUNC_CTL_I2S0_FCLK; +} + +/* PY port IO needs to configure PIOC */ +void init_dao_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PY08].FUNC_CTL = IOC_PY08_FUNC_CTL_DAOR_P; + HPM_PIOC->PAD[IOC_PAD_PY08].FUNC_CTL = PIOC_PY08_FUNC_CTL_SOC_PY_08; + + HPM_IOC->PAD[IOC_PAD_PY09].FUNC_CTL = IOC_PY09_FUNC_CTL_DAOR_N; + HPM_PIOC->PAD[IOC_PAD_PY09].FUNC_CTL = PIOC_PY09_FUNC_CTL_SOC_PY_09; +} + +/* PY port IO needs to configure PIOC */ +void init_pdm_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PY10].FUNC_CTL = IOC_PY10_FUNC_CTL_PDM0_CLK; + HPM_PIOC->PAD[IOC_PAD_PY10].FUNC_CTL = PIOC_PY10_FUNC_CTL_SOC_PY_10; + + HPM_IOC->PAD[IOC_PAD_PY11].FUNC_CTL = IOC_PY11_FUNC_CTL_PDM0_D_0; + HPM_PIOC->PAD[IOC_PAD_PY11].FUNC_CTL = PIOC_PY11_FUNC_CTL_SOC_PY_11; +} + +void init_vad_pins(void) +{ + HPM_PIOC->PAD[IOC_PAD_PY10].FUNC_CTL = PIOC_PY10_FUNC_CTL_VAD_CLK; + + HPM_PIOC->PAD[IOC_PAD_PY11].FUNC_CTL = PIOC_PY11_FUNC_CTL_VAD_DAT; +} + +void init_cam_pins(void) +{ + /* configure rst pin function, PY port IO needs to configure PIOC */ + HPM_IOC->PAD[IOC_PAD_PY05].FUNC_CTL = IOC_PY05_FUNC_CTL_GPIO_Y_05; + HPM_PIOC->PAD[IOC_PAD_PY05].FUNC_CTL = PIOC_PY05_FUNC_CTL_SOC_PY_05; + + HPM_IOC->PAD[IOC_PAD_PA07].FUNC_CTL = IOC_PA07_FUNC_CTL_CAM0_D_2; + + HPM_IOC->PAD[IOC_PAD_PA03].FUNC_CTL = IOC_PA03_FUNC_CTL_CAM0_D_3; + + HPM_IOC->PAD[IOC_PAD_PA08].FUNC_CTL = IOC_PA08_FUNC_CTL_CAM0_D_4; + + HPM_IOC->PAD[IOC_PAD_PA09].FUNC_CTL = IOC_PA09_FUNC_CTL_CAM0_D_5; + + HPM_IOC->PAD[IOC_PAD_PA00].FUNC_CTL = IOC_PA00_FUNC_CTL_CAM0_D_6; + + HPM_IOC->PAD[IOC_PAD_PA04].FUNC_CTL = IOC_PA04_FUNC_CTL_CAM0_D_7; + + HPM_IOC->PAD[IOC_PAD_PA01].FUNC_CTL = IOC_PA01_FUNC_CTL_CAM0_D_8; + + HPM_IOC->PAD[IOC_PAD_PA02].FUNC_CTL = IOC_PA02_FUNC_CTL_CAM0_D_9; + + HPM_IOC->PAD[IOC_PAD_PA10].FUNC_CTL = IOC_PA10_FUNC_CTL_CAM0_XCLK; + + HPM_IOC->PAD[IOC_PAD_PA05].FUNC_CTL = IOC_PA05_FUNC_CTL_CAM0_HSYNC; + + HPM_IOC->PAD[IOC_PAD_PA06].FUNC_CTL = IOC_PA06_FUNC_CTL_CAM0_VSYNC; + + HPM_IOC->PAD[IOC_PAD_PA11].FUNC_CTL = IOC_PA11_FUNC_CTL_CAM0_PIXCLK; +} + +void init_butn_pins(void) +{ + HPM_BIOC->PAD[IOC_PAD_PZ02].FUNC_CTL = BIOC_PZ02_FUNC_CTL_PBUTN; + + HPM_BIOC->PAD[IOC_PAD_PZ03].FUNC_CTL = BIOC_PZ03_FUNC_CTL_WBUTN; + + HPM_BIOC->PAD[IOC_PAD_PZ04].FUNC_CTL = BIOC_PZ04_FUNC_CTL_PLED; + + HPM_BIOC->PAD[IOC_PAD_PZ05].FUNC_CTL = BIOC_PZ05_FUNC_CTL_WLED; +} + +void init_acmp_pins(void) +{ + /* configure to ACMP_COMP_1(ALT16) function */ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PE25_FUNC_CTL_ACMP_COMP_1; + + /* configure to CMP1_INP7 function */ + HPM_IOC->PAD[IOC_PAD_PE23].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; + + /* configure to CMP1_INN6 function */ + HPM_IOC->PAD[IOC_PAD_PE21].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; +} + +void init_enet0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF00].FUNC_CTL = IOC_PF00_FUNC_CTL_GPIO_F_00; + + HPM_IOC->PAD[IOC_PAD_PE23].FUNC_CTL = IOC_PE23_FUNC_CTL_ETH0_MDIO; + + HPM_IOC->PAD[IOC_PAD_PE22].FUNC_CTL = IOC_PE22_FUNC_CTL_ETH0_MDC; + + HPM_IOC->PAD[IOC_PAD_PD31].FUNC_CTL = IOC_PD31_FUNC_CTL_ETH0_RXD_0; + + HPM_IOC->PAD[IOC_PAD_PE04].FUNC_CTL = IOC_PE04_FUNC_CTL_ETH0_RXD_1; + + HPM_IOC->PAD[IOC_PAD_PE02].FUNC_CTL = IOC_PE02_FUNC_CTL_ETH0_RXD_2; + + HPM_IOC->PAD[IOC_PAD_PE07].FUNC_CTL = IOC_PE07_FUNC_CTL_ETH0_RXD_3; + + HPM_IOC->PAD[IOC_PAD_PE03].FUNC_CTL = IOC_PE03_FUNC_CTL_ETH0_RXCK; + + HPM_IOC->PAD[IOC_PAD_PD30].FUNC_CTL = IOC_PD30_FUNC_CTL_ETH0_RXDV; + + HPM_IOC->PAD[IOC_PAD_PE06].FUNC_CTL = IOC_PE06_FUNC_CTL_ETH0_TXD_0; + + HPM_IOC->PAD[IOC_PAD_PD29].FUNC_CTL = IOC_PD29_FUNC_CTL_ETH0_TXD_1; + + HPM_IOC->PAD[IOC_PAD_PD28].FUNC_CTL = IOC_PD28_FUNC_CTL_ETH0_TXD_2; + + HPM_IOC->PAD[IOC_PAD_PE05].FUNC_CTL = IOC_PE05_FUNC_CTL_ETH0_TXD_3; + + HPM_IOC->PAD[IOC_PAD_PE01].FUNC_CTL = IOC_PE01_FUNC_CTL_ETH0_TXCK; + + HPM_IOC->PAD[IOC_PAD_PE00].FUNC_CTL = IOC_PE00_FUNC_CTL_ETH0_TXEN; +} + +void init_enet1_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE26].FUNC_CTL = IOC_PE26_FUNC_CTL_GPIO_E_26; + + HPM_IOC->PAD[IOC_PAD_PD11].FUNC_CTL = IOC_PD11_FUNC_CTL_ETH1_MDC; + + HPM_IOC->PAD[IOC_PAD_PD14].FUNC_CTL = IOC_PD14_FUNC_CTL_ETH1_MDIO; + + HPM_IOC->PAD[IOC_PAD_PE20].FUNC_CTL = IOC_PE20_FUNC_CTL_ETH1_RXD_0; + + HPM_IOC->PAD[IOC_PAD_PE18].FUNC_CTL = IOC_PE18_FUNC_CTL_ETH1_RXD_1; + + HPM_IOC->PAD[IOC_PAD_PE15].FUNC_CTL = IOC_PE15_FUNC_CTL_ETH1_RXDV; + + HPM_IOC->PAD[IOC_PAD_PE19].FUNC_CTL = IOC_PE19_FUNC_CTL_ETH1_TXD_0; + + HPM_IOC->PAD[IOC_PAD_PE17].FUNC_CTL = IOC_PE17_FUNC_CTL_ETH1_TXD_1; + + HPM_IOC->PAD[IOC_PAD_PE14].FUNC_CTL = IOC_PE14_FUNC_CTL_ETH1_TXEN; + + HPM_IOC->PAD[IOC_PAD_PE16].FUNC_CTL = IOC_PE16_FUNC_CTL_ETH1_REFCLK | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; +} + +void init_pwm2_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PD28].FUNC_CTL = IOC_PD28_FUNC_CTL_PWM2_P_5; + + HPM_IOC->PAD[IOC_PAD_PD29].FUNC_CTL = IOC_PD29_FUNC_CTL_PWM2_P_4; + + HPM_IOC->PAD[IOC_PAD_PD30].FUNC_CTL = IOC_PD30_FUNC_CTL_PWM2_P_1; + + HPM_IOC->PAD[IOC_PAD_PD31].FUNC_CTL = IOC_PD31_FUNC_CTL_PWM2_P_0; + + HPM_IOC->PAD[IOC_PAD_PE03].FUNC_CTL = IOC_PE03_FUNC_CTL_PWM2_P_3; + + HPM_IOC->PAD[IOC_PAD_PE04].FUNC_CTL = IOC_PE04_FUNC_CTL_PWM2_P_2; +} + +void init_pwm3_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE17].FUNC_CTL = IOC_PE17_FUNC_CTL_PWM3_P_6; + + HPM_IOC->PAD[IOC_PAD_PE18].FUNC_CTL = IOC_PE18_FUNC_CTL_PWM3_P_7; +} + +void init_adc12_pins(void) +{ + /* ADC0.VIN11 */ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; +} + +void init_adc16_pins(void) +{ + /* ADC3.INA2 */ + HPM_IOC->PAD[IOC_PAD_PE29].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; +} + +void init_adc_bldc_pins(void) +{ + /* ADC0.VINP7 */ + HPM_IOC->PAD[IOC_PAD_PE21].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; + + /* ADC1.VINP10 */ + HPM_IOC->PAD[IOC_PAD_PE24].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; + + /* ADC2.VINP11 */ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PAD_FUNC_CTL_ANALOG_MASK; +} + +void init_usb0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF10].FUNC_CTL = IOC_PF10_FUNC_CTL_USB0_ID; + + HPM_IOC->PAD[IOC_PAD_PF08].FUNC_CTL = IOC_PF08_FUNC_CTL_USB0_OC; +} + +void init_usb1_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF07].FUNC_CTL = IOC_PF07_FUNC_CTL_USB1_ID; + + HPM_IOC->PAD[IOC_PAD_PF05].FUNC_CTL = IOC_PF05_FUNC_CTL_USB1_OC; +} + +void init_can0_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PB15].FUNC_CTL = IOC_PB15_FUNC_CTL_CAN0_TXD; + + HPM_IOC->PAD[IOC_PAD_PB17].FUNC_CTL = IOC_PB17_FUNC_CTL_CAN0_RXD; +} + +void init_mcan0_transceiver_phy_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PB14].FUNC_CTL = IOC_PB14_FUNC_CTL_GPIO_B_14; +} + +void init_sdxc1_cmd_pin_enable_1v8_enable_opendrain(void) +{ + /* SDXC1.CMD */ + HPM_IOC->PAD[IOC_PAD_PD21].FUNC_CTL = IOC_PD21_FUNC_CTL_SDC1_CMD | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PD21].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1) | IOC_PAD_PAD_CTL_OD_SET(1); +} + +void init_sdxc1_cmd_pin_enable_1v8_disable_opendrain(void) +{ + /* SDXC1.CMD */ + HPM_IOC->PAD[IOC_PAD_PD21].FUNC_CTL = IOC_PD21_FUNC_CTL_SDC1_CMD | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PD21].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1) | IOC_PAD_PAD_CTL_OD_SET(0); +} + +void init_sdxc1_cmd_pin_disable_1v8_enable_opendrain(void) +{ + /* SDXC1.CMD */ + HPM_IOC->PAD[IOC_PAD_PD21].FUNC_CTL = IOC_PD21_FUNC_CTL_SDC1_CMD | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PD21].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1) | IOC_PAD_PAD_CTL_OD_SET(1); +} + +void init_sdxc1_cmd_pin_disable_1v8_disable_opendrain(void) +{ + /* SDXC1.CMD */ + HPM_IOC->PAD[IOC_PAD_PD21].FUNC_CTL = IOC_PD21_FUNC_CTL_SDC1_CMD | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_IOC->PAD[IOC_PAD_PD21].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1) | IOC_PAD_PAD_CTL_OD_SET(0); +} + +void init_sdxc1_cd_pin(void) +{ + /* SDXC1.CDN */ + HPM_IOC->PAD[IOC_PAD_PD15].FUNC_CTL = IOC_PD15_FUNC_CTL_GPIO_D_15; + HPM_IOC->PAD[IOC_PAD_PD15].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_clk_data_pins_enable_1v8(void) +{ + /* SDXC1.CLK */ + HPM_IOC->PAD[IOC_PAD_PD22].FUNC_CTL = IOC_PD22_FUNC_CTL_SDC1_CLK; + HPM_IOC->PAD[IOC_PAD_PD22].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA0 */ + HPM_IOC->PAD[IOC_PAD_PD18].FUNC_CTL = IOC_PD18_FUNC_CTL_SDC1_DATA_0; + HPM_IOC->PAD[IOC_PAD_PD18].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_clk_data_pins_disable_1v8(void) +{ + /* SDXC1.CLK */ + HPM_IOC->PAD[IOC_PAD_PD22].FUNC_CTL = IOC_PD22_FUNC_CTL_SDC1_CLK; + HPM_IOC->PAD[IOC_PAD_PD22].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA0 */ + HPM_IOC->PAD[IOC_PAD_PD18].FUNC_CTL = IOC_PD18_FUNC_CTL_SDC1_DATA_0; + HPM_IOC->PAD[IOC_PAD_PD18].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_clk_data_pins_width4_enable_1v8(void) +{ + /* SDXC1.DATA1 */ + HPM_IOC->PAD[IOC_PAD_PD17].FUNC_CTL = IOC_PD17_FUNC_CTL_SDC1_DATA_1; + HPM_IOC->PAD[IOC_PAD_PD17].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA2 */ + HPM_IOC->PAD[IOC_PAD_PD27].FUNC_CTL = IOC_PD27_FUNC_CTL_SDC1_DATA_2; + HPM_IOC->PAD[IOC_PAD_PD27].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA3 */ + HPM_IOC->PAD[IOC_PAD_PD26].FUNC_CTL = IOC_PD26_FUNC_CTL_SDC1_DATA_3; + HPM_IOC->PAD[IOC_PAD_PD26].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.CLK */ + HPM_IOC->PAD[IOC_PAD_PD22].FUNC_CTL = IOC_PD22_FUNC_CTL_SDC1_CLK; + HPM_IOC->PAD[IOC_PAD_PD22].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA0 */ + HPM_IOC->PAD[IOC_PAD_PD18].FUNC_CTL = IOC_PD18_FUNC_CTL_SDC1_DATA_0; + HPM_IOC->PAD[IOC_PAD_PD18].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_clk_data_pins_width4_disable_1v8(void) +{ + /* SDXC1.DATA1 */ + HPM_IOC->PAD[IOC_PAD_PD17].FUNC_CTL = IOC_PD17_FUNC_CTL_SDC1_DATA_1; + HPM_IOC->PAD[IOC_PAD_PD17].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA2 */ + HPM_IOC->PAD[IOC_PAD_PD27].FUNC_CTL = IOC_PD27_FUNC_CTL_SDC1_DATA_2; + HPM_IOC->PAD[IOC_PAD_PD27].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA3 */ + HPM_IOC->PAD[IOC_PAD_PD26].FUNC_CTL = IOC_PD26_FUNC_CTL_SDC1_DATA_3; + HPM_IOC->PAD[IOC_PAD_PD26].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.CLK */ + HPM_IOC->PAD[IOC_PAD_PD22].FUNC_CTL = IOC_PD22_FUNC_CTL_SDC1_CLK; + HPM_IOC->PAD[IOC_PAD_PD22].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); + + /* SDXC1.DATA0 */ + HPM_IOC->PAD[IOC_PAD_PD18].FUNC_CTL = IOC_PD18_FUNC_CTL_SDC1_DATA_0; + HPM_IOC->PAD[IOC_PAD_PD18].PAD_CTL = IOC_PAD_PAD_CTL_MS_SET(0) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_DS_SET(6) | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_sdxc1_pwr_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PC20].FUNC_CTL = IOC_PC20_FUNC_CTL_GPIO_C_20; + HPM_IOC->PAD[IOC_PAD_PC20].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_clk_obs_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PB02].FUNC_CTL = IOC_PB02_FUNC_CTL_SYSCTL_CLK_OBS_0; +} + +void init_rgb_pwm_pins(void) +{ + /* Red */ + HPM_IOC->PAD[IOC_PAD_PB11].FUNC_CTL = IOC_PB11_FUNC_CTL_TRGM1_P_01; + + /* Green */ + HPM_IOC->PAD[IOC_PAD_PB12].FUNC_CTL = IOC_PB12_FUNC_CTL_TRGM0_P_06; + + /* BLUE */ + HPM_IOC->PAD[IOC_PAD_PB13].FUNC_CTL = IOC_PB13_FUNC_CTL_TRGM1_P_03; +} + +void init_led_pins_as_gpio(void) +{ + HPM_IOC->PAD[IOC_PAD_PB11].FUNC_CTL = IOC_PB11_FUNC_CTL_GPIO_B_11; + + HPM_IOC->PAD[IOC_PAD_PB12].FUNC_CTL = IOC_PB12_FUNC_CTL_GPIO_B_12; + + HPM_IOC->PAD[IOC_PAD_PB13].FUNC_CTL = IOC_PB13_FUNC_CTL_GPIO_B_13; +} + +void init_enet_pps_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PF05].FUNC_CTL = IOC_PF05_FUNC_CTL_ETH0_EVTO_0; +} + +void init_enet_pps_capture_pins(void) +{ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PE25_FUNC_CTL_ETH0_EVTI_1; +} + +void init_tamper_pins(void) +{ + HPM_BIOC->PAD[IOC_PAD_PZ08].FUNC_CTL = BIOC_PZ08_FUNC_CTL_TAMP_08 | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + + HPM_BIOC->PAD[IOC_PAD_PZ09].FUNC_CTL = BIOC_PZ09_FUNC_CTL_TAMP_09; + + HPM_BIOC->PAD[IOC_PAD_PZ10].FUNC_CTL = BIOC_PZ10_FUNC_CTL_TAMP_10; +} + +/* for uart_rx_line_status case, need to a gpio pin to sent break signal */ +void init_uart_break_signal_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PE31].FUNC_CTL = IOC_PE31_FUNC_CTL_GPIO_E_31; + HPM_IOC->PAD[IOC_PAD_PE31].PAD_CTL = IOC_PAD_PAD_CTL_DS_SET(1) | IOC_PAD_PAD_CTL_PE_SET(1) | 0x08 | IOC_PAD_PAD_CTL_PS_SET(1); +} + +void init_gptmr3_channel_pin_as_output(void) +{ + HPM_IOC->PAD[IOC_PAD_PE24].FUNC_CTL = IOC_PE24_FUNC_CTL_GPTMR3_COMP_1; +} + +void init_gptmr4_channel_pin_as_capture(void) +{ + HPM_IOC->PAD[IOC_PAD_PE25].FUNC_CTL = IOC_PE25_FUNC_CTL_GPTMR4_CAPT_1; +} + +void init_gptmr5_channel2_pin_as_output(void) +{ + HPM_IOC->PAD[IOC_PAD_PD24].FUNC_CTL = IOC_PD24_FUNC_CTL_TRGM2_P_10; + + trgm_output_t trgm2_io_config0 = {0}; + trgm2_io_config0.invert = 0; + trgm2_io_config0.type = trgm_output_same_as_input; + trgm2_io_config0.input = HPM_TRGM2_INPUT_SRC_GPTMR5_OUT2; + trgm_output_config(HPM_TRGM2, HPM_TRGM2_OUTPUT_SRC_TRGM2_P10, &trgm2_io_config0); + + trgm_enable_io_output(HPM_TRGM2, 1 << 10); +} + +void init_gptmr5_channel3_pin_as_output(void) +{ + HPM_IOC->PAD[IOC_PAD_PD23].FUNC_CTL = IOC_PD23_FUNC_CTL_TRGM2_P_11; + + trgm_output_t trgm2_io_config0 = {0}; + trgm2_io_config0.invert = 0; + trgm2_io_config0.type = trgm_output_same_as_input; + trgm2_io_config0.input = HPM_TRGM2_INPUT_SRC_GPTMR5_OUT3; + trgm_output_config(HPM_TRGM2, HPM_TRGM2_OUTPUT_SRC_TRGM2_P11, &trgm2_io_config0); + + trgm_enable_io_output(HPM_TRGM2, 1 << 11); +} + +void init_clk_ref_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PE24].FUNC_CTL = IOC_PE24_FUNC_CTL_SOC_REF1; +} + +void init_brownout_indicate_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PE30].FUNC_CTL = IOC_PE30_FUNC_CTL_GPIO_E_30; +} + +void board_init_i2c_eeprom_pin(void) +{ + HPM_IOC->PAD[IOC_PAD_PZ11].FUNC_CTL = IOC_PZ11_FUNC_CTL_I2C0_SCL | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_BIOC->PAD[IOC_PAD_PZ11].FUNC_CTL = BIOC_PZ11_FUNC_CTL_SOC_PZ_11; + HPM_IOC->PAD[IOC_PAD_PZ11].PAD_CTL = IOC_PAD_PAD_CTL_OD_SET(1); + + HPM_IOC->PAD[IOC_PAD_PZ10].FUNC_CTL = IOC_PZ10_FUNC_CTL_I2C0_SDA | IOC_PAD_FUNC_CTL_LOOP_BACK_MASK; + HPM_BIOC->PAD[IOC_PAD_PZ10].FUNC_CTL = BIOC_PZ10_FUNC_CTL_SOC_PZ_10; + HPM_IOC->PAD[IOC_PAD_PZ10].PAD_CTL = IOC_PAD_PAD_CTL_OD_SET(1); +} diff --git a/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h b/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h new file mode 100644 index 000000000..460feded2 --- /dev/null +++ b/hw/bsp/hpmicro/boards/hpm6750evk2/pinmux.h @@ -0,0 +1,89 @@ + +/* + * Copyright (c) 2025 HPMicro + * + * SPDX-License-Identifier: BSD-3-Clause + * + * + * Automatically generated by HPM Pinmux Tool + * + * + * Note: + * PY and PZ IOs: if any SOC pin function needs to be routed to these IOs, + * besides of IOC, PIOC/BIOC needs to be configured SOC_GPIO_X_xx, so that + * expected SoC function can be enabled on these IOs. + */ + +#ifndef HPM_PINMUX_H +#define HPM_PINMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +void init_uart0_pins(void); +void init_uart2_pins(void); +void init_uart13_pins(void); +void init_puart_pins(void); +void init_uart13_pins_as_gpio(void); +void init_lcd0_pins(void); +void init_cap_pins(void); +void init_i2c0_pins_as_gpio(void); +void init_i2c0_pins(void); +void init_femc_pins(void); +void init_gpio_pins_with_pull_up(void); +void init_gpio_pins_using_gpio0(void); +void init_spi2_pins(void); +void init_spi2_pins_with_gpio_as_cs(void); +void init_gptmr3_pins(void); +void init_gptmr4_pins(void); +void init_gptmr5_pins(void); +void init_hall_trgm_pins(void); +void init_qei_trgm_pins(void); +void init_i2s0_pins(void); +void init_dao_pins(void); +void init_pdm_pins(void); +void init_vad_pins(void); +void init_cam_pins(void); +void init_butn_pins(void); +void init_acmp_pins(void); +void init_enet0_pins(void); +void init_enet1_pins(void); +void init_pwm2_pins(void); +void init_pwm3_pins(void); +void init_adc12_pins(void); +void init_adc16_pins(void); +void init_adc_bldc_pins(void); +void init_usb0_pins(void); +void init_usb1_pins(void); +void init_can0_pins(void); +void init_mcan0_transceiver_phy_pin(void); +void init_sdxc1_cmd_pin_enable_1v8_enable_opendrain(void); +void init_sdxc1_cmd_pin_enable_1v8_disable_opendrain(void); +void init_sdxc1_cmd_pin_disable_1v8_enable_opendrain(void); +void init_sdxc1_cmd_pin_disable_1v8_disable_opendrain(void); +void init_sdxc1_cd_pin(void); +void init_sdxc1_clk_data_pins_enable_1v8(void); +void init_sdxc1_clk_data_pins_disable_1v8(void); +void init_sdxc1_clk_data_pins_width4_enable_1v8(void); +void init_sdxc1_clk_data_pins_width4_disable_1v8(void); +void init_sdxc1_pwr_pin(void); +void init_clk_obs_pins(void); +void init_rgb_pwm_pins(void); +void init_led_pins_as_gpio(void); +void init_enet_pps_pins(void); +void init_enet_pps_capture_pins(void); +void init_tamper_pins(void); +void init_uart_break_signal_pin(void); +void init_gptmr3_channel_pin_as_output(void); +void init_gptmr4_channel_pin_as_capture(void); +void init_gptmr5_channel2_pin_as_output(void); +void init_gptmr5_channel3_pin_as_output(void); +void init_clk_ref_pin(void); +void init_brownout_indicate_pin(void); +void board_init_i2c_eeprom_pin(void); + +#ifdef __cplusplus +} +#endif +#endif /* HPM_PINMUX_H */ diff --git a/hw/bsp/hpmicro/family.c b/hw/bsp/hpmicro/family.c new file mode 100644 index 000000000..ffec2523a --- /dev/null +++ b/hw/bsp/hpmicro/family.c @@ -0,0 +1,115 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: HPMicro +*/ + +#include "bsp/board_api.h" +#include "board.h" +#include "hpm_clock_drv.h" +#include "hpm_uart_drv.h" +#include "hpm_gpio_drv.h" +#include "hpm_romapi.h" + + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void) { + board_init_clock(); + board_init_pmp(); + + board_init_usb(HPM_USB0); +#ifdef HPM_USB1 + board_init_usb(HPM_USB1); +#endif + + board_init_console(); + board_init_gpio_pins(); + board_init_led_pins(); +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +SDK_DECLARE_EXT_ISR_M(IRQn_USB0, isr_usb0) +void isr_usb0(void) { + tusb_int_handler(0, true); +} + +#ifdef HPM_USB1_BASE +SDK_DECLARE_EXT_ISR_M(IRQn_USB1, isr_usb1) +void isr_usb1(void) { + tusb_int_handler(1, true); +} +#endif + +void board_led_write(bool state) { + if (state) { + gpio_write_pin(BOARD_LED_GPIO_CTRL, BOARD_LED_GPIO_INDEX, BOARD_LED_GPIO_PIN, BOARD_LED_ON_LEVEL); + } else { + gpio_write_pin(BOARD_LED_GPIO_CTRL, BOARD_LED_GPIO_INDEX, BOARD_LED_GPIO_PIN, BOARD_LED_OFF_LEVEL); + } +} + +uint32_t board_button_read(void) { + return (gpio_read_pin(BOARD_APP_GPIO_CTRL, BOARD_APP_GPIO_INDEX, BOARD_APP_GPIO_PIN) == BOARD_BUTTON_PRESSED_VALUE) ? 1 : 0; +} + +// Get characters from UART. Return number of read bytes +int board_uart_read(uint8_t *buf, int len) { + int count = 0; + hpm_stat_t status; + + while (count < len) { + status = uart_try_receive_byte((UART_Type *)BOARD_CONSOLE_UART_BASE, (uint8_t *)&buf[count]); + if (status == status_success) { + count++; + } else { + break; + } + } + + return count; +} + +// Send characters to UART. Return number of sent bytes +int board_uart_write(void const *buf, int len) { + uart_send_data((UART_Type *)BOARD_CONSOLE_UART_BASE, (uint8_t const *)buf, len); + + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +// Get current milliseconds, must be implemented when no RTOS is used +uint32_t board_millis(void) { + return (hpm_csr_get_core_cycle() / clock_get_core_clock_ticks_per_ms()); +} + +#endif diff --git a/hw/bsp/hpmicro/family.cmake b/hw/bsp/hpmicro/family.cmake new file mode 100644 index 000000000..4500f326f --- /dev/null +++ b/hw/bsp/hpmicro/family.cmake @@ -0,0 +1,131 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/hpmicro/hpm_sdk) + +set(CROSS_COMPILE "riscv32-unknown-elf-") + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +if (NOT DEFINED CMAKE_SYSTEM_CPU) + set(CMAKE_SYSTEM_CPU rv32imac-ilp32 CACHE INTERNAL "System Processor") +endif () +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS HPMIRCO CACHE INTERNAL "") + +#------------------------------------ +# Startup & Linker script +#------------------------------------ +if (NOT DEFINED LD_FILE_GNU) +set(LD_FILE_GNU ${HPM_SOC}/toolchains/gcc/flash_xip.ld) +endif () +set(LD_FILE_Clang ${LD_FILE_GNU}) + +set(STARTUP_FILE_GNU ${HPM_SOC}/toolchains/gcc/start.S) +set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + +#------------------------------------ +# Board Target +#------------------------------------ +function(family_add_board BOARD_TARGET) + add_library(${BOARD_TARGET} STATIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/pinmux.c + ${HPM_SOC}/boot/hpm_bootheader.c + ${HPM_SOC}/toolchains/gcc/initfini.c + ${HPM_SOC}/toolchains/reset.c + ${HPM_SOC}/toolchains/trap.c + ${HPM_SOC}/system.c + ${HPM_SOC}/hpm_sysctl_drv.c + ${HPM_SOC}/hpm_clock_drv.c + ${HPM_SOC}/hpm_otp_drv.c + ${SDK_DIR}/arch/riscv/l1c/hpm_l1c_drv.c + ${SDK_DIR}/drivers/src/hpm_gpio_drv.c + ${SDK_DIR}/drivers/src/hpm_uart_drv.c + ${SDK_DIR}/drivers/src/hpm_usb_drv.c + ${SDK_DIR}/drivers/src/hpm_pcfg_drv.c + ${SDK_DIR}/drivers/src/hpm_pmp_drv.c + ${SDK_DIR}/drivers/src/${HPM_PLLCTL_DRV_FILE} + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + FLASH_XIP + [=[CFG_TUD_MEM_SECTION=__attribute__((section(".noncacheable.non_init")))]=] + [=[CFG_TUH_MEM_SECTION=__attribute__((section(".noncacheable.non_init")))]=] + ) + + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board + ${HPM_SOC} + ${HPM_IP_REGS} + ${HPM_SOC}/boot + ${HPM_SOC}/toolchains + ${HPM_SOC}/toolchains/gcc + ${SDK_DIR}/arch + ${SDK_DIR}/arch/riscv/intc + ${SDK_DIR}/arch/riscv/l1c + ${SDK_DIR}/drivers/inc + ) + + update_board(${BOARD_TARGET}) +endfunction() + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_HPM) + + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${SDK_DIR}/utils/hpm_sbrk.c + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ${TOP}/src/portable/chipidea/ci_hs + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + -Wl,--defsym,_flash_size=${BOARD_FLASH_SIZE} + -Wl,--defsym,_stack_size=${BOARD_STACK_SIZE} + -Wl,--defsym,_heap_size=${BOARD_HEAP_SIZE} + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -Wl,--defsym,_flash_size=${BOARD_FLASH_SIZE} + -Wl,--defsym,_stack_size=${BOARD_STACK_SIZE} + -Wl,--defsym,_heap_size=${BOARD_HEAP_SIZE} + ) + endif () + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_source_files_properties( + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${SDK_DIR}/utils/hpm_sbrk.c + PROPERTIES COMPILE_FLAGS "-Wno-missing-prototypes -Wno-cast-align -Wno-discarded-qualifiers" + ) + endif () + set_source_files_properties(${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} PROPERTIES + SKIP_LINTING ON + COMPILE_OPTIONS -w) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/hpmicro/family.mk b/hw/bsp/hpmicro/family.mk new file mode 100644 index 000000000..9721e2f7d --- /dev/null +++ b/hw/bsp/hpmicro/family.mk @@ -0,0 +1,76 @@ +SDK_DIR = hw/mcu/hpmicro/hpm_sdk + +CROSS_COMPILE ?= riscv32-unknown-elf- + +include $(TOP)/$(BOARD_PATH)/board.mk + +CPU_CORE ?= rv32imac-ilp32 + +# All source paths should be relative to the top level. +LD_FILE = $(HPM_SOC)/toolchains/gcc/flash_xip.ld + +CFLAGS += \ + -DFLASH_XIP \ + -DCFG_TUSB_MCU=OPT_MCU_HPM \ + -DCFG_TUD_MEM_SECTION='__attribute__((section(".noncacheable.non_init")))' \ + -DCFG_TUH_MEM_SECTION='__attribute__((section(".noncacheable.non_init")))' + +ifdef BOARD_TUD_RHPORT +CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT) +CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED +endif + +ifdef BOARD_TUH_RHPORT +CFLAGS += -DBOARD_TUH_RHPORT=$(BOARD_TUH_RHPORT) +CFLAGS += -DBOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=cast-align -Wno-error=double-promotion -Wno-error=discarded-qualifiers \ + -Wno-error=undef -Wno-error=unused-parameter -Wno-error=redundant-decls + +LDFLAGS_GCC += \ + -nostartfiles \ + --specs=nosys.specs --specs=nano.specs + +LDFLAGS += -Wl,--defsym,_flash_size=$(BOARD_FLASH_SIZE) +LDFLAGS += -Wl,--defsym,_stack_size=$(BOARD_STACK_SIZE) +LDFLAGS += -Wl,--defsym,_heap_size=$(BOARD_HEAP_SIZE) + +SRC_C += \ + src/portable/chipidea/ci_hs/dcd_ci_hs.c \ + src/portable/chipidea/ci_hs/hcd_ci_hs.c \ + src/portable/ehci/ehci.c \ + ${BOARD_PATH}/board.c \ + ${BOARD_PATH}/pinmux.c \ + $(HPM_SOC)/boot/hpm_bootheader.c \ + $(HPM_SOC)/toolchains/gcc/initfini.c \ + $(HPM_SOC)/toolchains/reset.c \ + $(HPM_SOC)/toolchains/trap.c \ + $(HPM_SOC)/system.c \ + $(HPM_SOC)/hpm_sysctl_drv.c \ + $(HPM_SOC)/hpm_clock_drv.c \ + $(HPM_SOC)/hpm_otp_drv.c \ + $(SDK_DIR)/arch/riscv/l1c/hpm_l1c_drv.c \ + $(SDK_DIR)/utils/hpm_sbrk.c \ + $(SDK_DIR)/drivers/src/hpm_gpio_drv.c \ + $(SDK_DIR)/drivers/src/hpm_uart_drv.c \ + $(SDK_DIR)/drivers/src/hpm_usb_drv.c \ + $(SDK_DIR)/drivers/src/hpm_pcfg_drv.c \ + $(SDK_DIR)/drivers/src/hpm_pmp_drv.c \ + $(SDK_DIR)/drivers/src/$(HPM_PLLCTL_DRV_FILE) \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/src/portable/chipidea/ci_hs \ + $(TOP)/$(HPM_SOC) \ + $(TOP)/$(HPM_IP_REGS) \ + $(TOP)/$(HPM_SOC)/boot \ + $(TOP)/$(HPM_SOC)/toolchains \ + $(TOP)/$(HPM_SOC)/toolchains/gcc \ + $(TOP)/$(SDK_DIR)/arch \ + $(TOP)/$(SDK_DIR)/arch/riscv/intc \ + $(TOP)/$(SDK_DIR)/arch/riscv/l1c \ + $(TOP)/$(SDK_DIR)/drivers/inc \ + +SRC_S += $(HPM_SOC)/toolchains/gcc/start.S diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 1e773bf96..95fbc061f 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -653,6 +653,18 @@ #define TUP_USBIP_DWC2_AT32 #define TUP_DCD_ENDPOINT_MAX 8 +//--------------------------------------------------------------------+ +// HPMicro +//--------------------------------------------------------------------+ +#elif TU_CHECK_MCU(OPT_MCU_HPM) + #define TUP_USBIP_CHIPIDEA_HS + #define TUP_USBIP_EHCI + + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_RHPORT_HIGHSPEED 1 + + #define TU_ATTR_FAST_FUNC __attribute__((section(".fast"))) + #endif //--------------------------------------------------------------------+ diff --git a/src/portable/chipidea/ci_hs/ci_hs_hpm.h b/src/portable/chipidea/ci_hs/ci_hs_hpm.h new file mode 100644 index 000000000..68211448c --- /dev/null +++ b/src/portable/chipidea/ci_hs/ci_hs_hpm.h @@ -0,0 +1,54 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _CI_HS_HPM_H_ +#define _CI_HS_HPM_H_ + +#include "ci_hs_type.h" +#include "hpm_soc.h" +#include "hpm_interrupt.h" +#include "hpm_usb_drv.h" + +static const ci_hs_controller_t _ci_controller[] = +{ + { .reg_base = HPM_USB0_BASE, .irqnum = IRQn_USB0}, + #ifdef HPM_USB1_BASE + { .reg_base = HPM_USB1_BASE, .irqnum = IRQn_USB1}, + #endif +}; + +#define CI_HS_REG(_port) ((ci_hs_regs_t*) _ci_controller[_port].reg_base) + +//------------- DCD -------------// +#define CI_DCD_INT_ENABLE(_p) intc_m_enable_irq (_ci_controller[_p].irqnum) +#define CI_DCD_INT_DISABLE(_p) intc_m_disable_irq(_ci_controller[_p].irqnum) + +//------------- HCD -------------// +#define CI_HCD_INT_ENABLE(_p) intc_m_enable_irq (_ci_controller[_p].irqnum) +#define CI_HCD_INT_DISABLE(_p) intc_m_disable_irq(_ci_controller[_p].irqnum) + + +#endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 4a5e5c91f..00df434d8 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -55,6 +55,10 @@ bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { // MCX N9 only port 1 use this controller #include "ci_hs_mcx.h" +#elif TU_CHECK_MCU(OPT_MCU_HPM) + + #include "ci_hs_hpm.h" + #else #error "Unsupported MCUs" #endif @@ -230,6 +234,10 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { TU_ASSERT(ci_ep_count(dcd_reg) <= TUP_DCD_ENDPOINT_MAX); +#if TU_CHECK_MCU(OPT_MCU_HPM) + usb_phy_init((USB_Type *)dcd_reg, false); +#endif + // Reset controller dcd_reg->USBCMD |= USBCMD_RESET; while( dcd_reg->USBCMD & USBCMD_RESET ) {} @@ -246,7 +254,11 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { #endif #if !TUD_OPT_HIGH_SPEED - dcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; + dcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; +#endif + +#if TU_CHECK_MCU(OPT_MCU_HPM) + dcd_reg->PORTSC1 &= ~USB_PORTSC1_STS_MASK; #endif dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index b5324a754..922d32989 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -61,6 +61,10 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { #include "ci_hs_lpc18_43.h" +#elif TU_CHECK_MCU(OPT_MCU_HPM) + +#include "ci_hs_hpm.h" + #else #error "Unsupported MCUs" #endif @@ -77,6 +81,10 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rh_init; ci_hs_regs_t *hcd_reg = CI_HS_REG(rhport); +#if CFG_TUSB_MCU == OPT_MCU_HPM + usb_phy_init((USB_Type *)hcd_reg, true); +#endif + // Reset controller hcd_reg->USBCMD |= USBCMD_RESET; while ( hcd_reg->USBCMD & USBCMD_RESET ) {} diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index c33c970e4..0d6f5ef12 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -44,6 +44,10 @@ #include "fsl_device_registers.h" #endif +#if TU_CHECK_MCU(OPT_MCU_HPM) +#include "ci_hs_hpm.h" +#endif + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -237,6 +241,14 @@ void hcd_port_reset(uint8_t rhport) { // mask out Write-1-to-Clear bits uint32_t portsc = regs->portsc & ~EHCI_PORTSC_MASK_W1C; +#if TU_CHECK_MCU(OPT_MCU_HPM) + if (usb_phy_get_line_state((USB_Type *)CI_HS_REG(rhport)) == usb_line_state2) { + portsc |= USB_PORTSC1_STS_MASK; + } else { + portsc &= ~USB_PORTSC1_STS_MASK; + } +#endif + // EHCI Table 2-16 PortSC // when software writes Port Reset bit to a one, it must also write a zero to the Port Enable bit. portsc &= ~(EHCI_PORTSC_MASK_PORT_EANBLED); diff --git a/src/tusb_option.h b/src/tusb_option.h index 1dc920d84..cd131c119 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -216,6 +216,9 @@ #define OPT_MCU_AT32F425 2505 ///< ArteryTek AT32F425 #define OPT_MCU_AT32F413 2506 ///< ArteryTek AT32F413 +// HPMicro +#define OPT_MCU_HPM 2600 ///< HPMicro + // Check if configured MCU is one of listed // Apply TU_MCU_IS_EQUAL with || as separator to list of input #define TU_MCU_IS_EQUAL(_m) (CFG_TUSB_MCU == (_m)) diff --git a/tools/get_deps.py b/tools/get_deps.py index b1b50d319..42ead17ff 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -244,6 +244,9 @@ deps_optional = { 'hw/mcu/artery/at32f413': ['https://github.com/ArteryTek/AT32F413_Firmware_Library.git', 'f6fe62dfec9fd40c5b63d92fc5ef2c2b5e77a450', 'at32f413'], + 'hw/mcu/hpmicro/hpm_sdk': ['https://github.com/hpmicro/hpm_sdk', + '8d2af741ecc4aaa82d7ee395dc1ce25d7070c3ff', + 'hpm_sdk hpmicro hpm6750 hpm6300 hpm6200 hpm6800 hpm5300 hpm6e00 hpm5e00'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' From 6b73d786b3ddddcb1fbed51909095a46d68d2449 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Mon, 8 Dec 2025 17:14:12 +0800 Subject: [PATCH 2/8] update risc-v march for gcc and clang toolchains - add `zifencei` option Signed-off-by: Zhihong Chen --- examples/build_system/cmake/cpu/rv32imac-ilp32.cmake | 4 ++-- examples/build_system/make/cpu/rv32imac-ilp32.mk | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake index 584d90519..8c2538cee 100644 --- a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake +++ b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake @@ -1,13 +1,13 @@ if (TOOLCHAIN STREQUAL "gcc") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32imac_zicsr + -march=rv32imac_zicsr_zifencei -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") elseif (TOOLCHAIN STREQUAL "clang") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32imac_zicsr + -march=rv32imac_zicsr_zifencei -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") diff --git a/examples/build_system/make/cpu/rv32imac-ilp32.mk b/examples/build_system/make/cpu/rv32imac-ilp32.mk index 19c322ebc..a7b2258d7 100644 --- a/examples/build_system/make/cpu/rv32imac-ilp32.mk +++ b/examples/build_system/make/cpu/rv32imac-ilp32.mk @@ -1,11 +1,11 @@ ifeq ($(TOOLCHAIN),gcc) CFLAGS += \ - -march=rv32imac_zicsr \ + -march=rv32imac_zicsr_zifencei \ -mabi=ilp32 \ else ifeq ($(TOOLCHAIN),clang) CFLAGS += \ - -march=rv32imac_zicsr \ + -march=rv32imac_zicsr_zifencei \ -mabi=ilp32 \ else ifeq ($(TOOLCHAIN),iar) From d8da458a0b5a8806c2a7453c1a09bdf40f801fc5 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Tue, 9 Dec 2025 17:58:31 +0800 Subject: [PATCH 3/8] example: host: support hpmicro family Signed-off-by: Zhihong Chen --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/device_info/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/midi_rx/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + 6 files changed, 6 insertions(+) diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 52e51242c..3e5161c3c 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 52e51242c..3e5161c3c 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index becc8252d..b9a47ee3c 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,4 +1,5 @@ family:espressif +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 35b7c2361..2ec21d19a 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index a3976f08d..555305782 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 52e51242c..3e5161c3c 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -1,3 +1,4 @@ +family:hpmicro family:samd21 family:samd5x_e5x mcu:CH32V20X From d851e827211b8a9a0041d28dda3865a7e0dead19 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Tue, 9 Dec 2025 19:00:20 +0800 Subject: [PATCH 4/8] example: with FreeRTOS: skip hpmicro Signed-off-by: Zhihong Chen --- examples/device/audio_4_channel_mic_freertos/skip.txt | 1 + examples/device/audio_test_freertos/skip.txt | 1 + examples/device/cdc_msc_freertos/skip.txt | 1 + examples/device/hid_composite_freertos/skip.txt | 1 + examples/device/midi_test_freertos/skip.txt | 1 + 5 files changed, 5 insertions(+) diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index 65925b32c..4c2780096 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -18,3 +18,4 @@ board:lpcxpresso1347 family:broadcom_32bit family:broadcom_64bit family:nuc121_125 +family:hpmicro diff --git a/examples/device/audio_test_freertos/skip.txt b/examples/device/audio_test_freertos/skip.txt index c9cdacad7..2da7808e7 100644 --- a/examples/device/audio_test_freertos/skip.txt +++ b/examples/device/audio_test_freertos/skip.txt @@ -16,3 +16,4 @@ family:broadcom_32bit family:broadcom_64bit board:stm32l0538disco family:nuc121_125 +family:hpmicro diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index 69fc883e6..d90741df7 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -16,3 +16,4 @@ mcu:STM32L0 family:broadcom_32bit family:broadcom_64bit family:nuc121_125 +family:hpmicro diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index 650bf355b..01990a5b4 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -14,3 +14,4 @@ mcu:VALENTYUSB_EPTRI mcu:RAXXX family:broadcom_32bit family:broadcom_64bit +family:hpmicro diff --git a/examples/device/midi_test_freertos/skip.txt b/examples/device/midi_test_freertos/skip.txt index 650bf355b..01990a5b4 100644 --- a/examples/device/midi_test_freertos/skip.txt +++ b/examples/device/midi_test_freertos/skip.txt @@ -14,3 +14,4 @@ mcu:VALENTYUSB_EPTRI mcu:RAXXX family:broadcom_32bit family:broadcom_64bit +family:hpmicro From 0d1521e42e8f711944db2f1571953c12e5c07dd1 Mon Sep 17 00:00:00 2001 From: Zhihong Chen Date: Thu, 11 Dec 2025 10:38:22 +0800 Subject: [PATCH 5/8] update README.rst to add HPMicro MCU Signed-off-by: Zhihong Chen --- README.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/README.rst b/README.rst index da1f49fcd..dc6509bfb 100644 --- a/README.rst +++ b/README.rst @@ -159,6 +159,8 @@ Supported CPUs +--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ | GigaDevice | GD32VF103 | ✔ | | ✖ | dwc2 | | +--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ +| HPMicro | HPM6750 | ✔ | ✔ | ✔ | ci_hs, ehci | | ++--------------+-----------------------------+--------+------+-----------+------------------------+--------------------+ | Infineon | XMC4500 | ✔ | ✔ | ✖ | dwc2 | | +--------------+-----+-----------------------+--------+------+-----------+------------------------+--------------------+ | MicroChip | SAM | D11, D21, L21, L22 | ✔ | | ✖ | samd | | From 15e3324579f3506730b6669730d8243a150d67ff Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Thu, 11 Dec 2025 10:56:18 +0100 Subject: [PATCH 6/8] cleanup, add preset Signed-off-by: Zixun LI Signed-off-by: HiFiPhile --- hw/bsp/BoardPresets.json | 66 +++++++++++++------------------------ hw/bsp/hpmicro/family.cmake | 4 +-- hw/bsp/hpmicro/family.mk | 2 -- tools/get_deps.py | 2 +- 4 files changed, 24 insertions(+), 50 deletions(-) diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json index 5df924138..8829e65f8 100644 --- a/hw/bsp/BoardPresets.json +++ b/hw/bsp/BoardPresets.json @@ -234,6 +234,10 @@ "name": "frdm_mcxn947", "inherits": "default" }, + { + "name": "hpm6750evk2", + "inherits": "default" + }, { "name": "itsybitsy_m0", "inherits": "default" @@ -362,10 +366,6 @@ "name": "metro_m7_1011_sd", "inherits": "default" }, - { - "name": "metro_nrf52840", - "inherits": "default" - }, { "name": "mimxrt1010_evk", "inherits": "default" @@ -518,10 +518,6 @@ "name": "raspberry_pi_pico2", "inherits": "default" }, - { - "name": "raspberry_pi_pico2_riscv", - "inherits": "default" - }, { "name": "raspberry_pi_pico_w", "inherits": "default" @@ -1228,6 +1224,11 @@ "description": "Build preset for the frdm_mcxn947 board", "configurePreset": "frdm_mcxn947" }, + { + "name": "hpm6750evk2", + "description": "Build preset for the hpm6750evk2 board", + "configurePreset": "hpm6750evk2" + }, { "name": "itsybitsy_m0", "description": "Build preset for the itsybitsy_m0 board", @@ -1388,11 +1389,6 @@ "description": "Build preset for the metro_m7_1011_sd board", "configurePreset": "metro_m7_1011_sd" }, - { - "name": "metro_nrf52840", - "description": "Build preset for the metro_nrf52840 board", - "configurePreset": "metro_nrf52840" - }, { "name": "mimxrt1010_evk", "description": "Build preset for the mimxrt1010_evk board", @@ -1583,11 +1579,6 @@ "description": "Build preset for the raspberry_pi_pico2 board", "configurePreset": "raspberry_pi_pico2" }, - { - "name": "raspberry_pi_pico2_riscv", - "description": "Build preset for the raspberry_pi_pico2_riscv board", - "configurePreset": "raspberry_pi_pico2_riscv" - }, { "name": "raspberry_pi_pico_w", "description": "Build preset for the raspberry_pi_pico_w board", @@ -2854,6 +2845,19 @@ } ] }, + { + "name": "hpm6750evk2", + "steps": [ + { + "type": "configure", + "name": "hpm6750evk2" + }, + { + "type": "build", + "name": "hpm6750evk2" + } + ] + }, { "name": "itsybitsy_m0", "steps": [ @@ -3270,19 +3274,6 @@ } ] }, - { - "name": "metro_nrf52840", - "steps": [ - { - "type": "configure", - "name": "metro_nrf52840" - }, - { - "type": "build", - "name": "metro_nrf52840" - } - ] - }, { "name": "mimxrt1010_evk", "steps": [ @@ -3777,19 +3768,6 @@ } ] }, - { - "name": "raspberry_pi_pico2_riscv", - "steps": [ - { - "type": "configure", - "name": "raspberry_pi_pico2_riscv" - }, - { - "type": "build", - "name": "raspberry_pi_pico2_riscv" - } - ] - }, { "name": "raspberry_pi_pico_w", "steps": [ diff --git a/hw/bsp/hpmicro/family.cmake b/hw/bsp/hpmicro/family.cmake index 4500f326f..1289859d3 100644 --- a/hw/bsp/hpmicro/family.cmake +++ b/hw/bsp/hpmicro/family.cmake @@ -2,8 +2,6 @@ include_guard() set(SDK_DIR ${TOP}/hw/mcu/hpmicro/hpm_sdk) -set(CROSS_COMPILE "riscv32-unknown-elf-") - # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) @@ -13,7 +11,7 @@ if (NOT DEFINED CMAKE_SYSTEM_CPU) endif () set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS HPMIRCO CACHE INTERNAL "") +set(FAMILY_MCUS HPMICRO CACHE INTERNAL "") #------------------------------------ # Startup & Linker script diff --git a/hw/bsp/hpmicro/family.mk b/hw/bsp/hpmicro/family.mk index 9721e2f7d..f8cde55eb 100644 --- a/hw/bsp/hpmicro/family.mk +++ b/hw/bsp/hpmicro/family.mk @@ -1,7 +1,5 @@ SDK_DIR = hw/mcu/hpmicro/hpm_sdk -CROSS_COMPILE ?= riscv32-unknown-elf- - include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 diff --git a/tools/get_deps.py b/tools/get_deps.py index 42ead17ff..9d9e8149f 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -246,7 +246,7 @@ deps_optional = { 'at32f413'], 'hw/mcu/hpmicro/hpm_sdk': ['https://github.com/hpmicro/hpm_sdk', '8d2af741ecc4aaa82d7ee395dc1ce25d7070c3ff', - 'hpm_sdk hpmicro hpm6750 hpm6300 hpm6200 hpm6800 hpm5300 hpm6e00 hpm5e00'], + 'hpmicro'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' From e00c3d1726950fda4833c265d4df0ad9b1b97c00 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 16 Dec 2025 16:23:55 +0700 Subject: [PATCH 7/8] enable ci build for hpmicro --- .github/workflows/ci_set_matrix.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 933a8375f..994773f69 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -17,7 +17,7 @@ toolchain_list = [ family_list = { "at32f402_405 at32f403a_407 at32f413 at32f415 at32f423 at32f425 at32f435_437 broadcom_32bit da1469x": ["arm-gcc"], "broadcom_64bit": ["aarch64-gcc"], - "ch32v10x ch32v20x ch32v30x fomu gd32vf103": ["riscv-gcc"], + "ch32v10x ch32v20x ch32v30x fomu gd32vf103 hpmicro": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], "lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], From 5a7e5db78770d6fd37992b5812f910c3546f2a72 Mon Sep 17 00:00:00 2001 From: Zixun LI Date: Tue, 16 Dec 2025 11:09:16 +0100 Subject: [PATCH 8/8] fix riscv toolchain Signed-off-by: Zixun LI --- .../build_system/make/toolchain/riscv_gcc.mk | 2 +- hw/bsp/family_support.mk | 17 +++++++++++++++-- 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/examples/build_system/make/toolchain/riscv_gcc.mk b/examples/build_system/make/toolchain/riscv_gcc.mk index 843aff38c..b5de12a83 100644 --- a/examples/build_system/make/toolchain/riscv_gcc.mk +++ b/examples/build_system/make/toolchain/riscv_gcc.mk @@ -1,7 +1,7 @@ # makefile for arm gcc toolchain # Can be set by family, default to ARM GCC -CROSS_COMPILE ?= riscv-none-embed- +CROSS_COMPILE ?= riscv-none-elf- CC = $(CROSS_COMPILE)gcc CXX = $(CROSS_COMPILE)g++ diff --git a/hw/bsp/family_support.mk b/hw/bsp/family_support.mk index db410a657..7122a7764 100644 --- a/hw/bsp/family_support.mk +++ b/hw/bsp/family_support.mk @@ -131,8 +131,21 @@ ifdef CPU_CORE include ${TOP}/examples/build_system/make/cpu/$(CPU_CORE).mk endif -# toolchain specific -include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk +# toolchain specific - select based on CPU architecture +ifdef CPU_CORE + ifneq (,$(filter cortex% arm%,$(CPU_CORE))) + # ARM/Cortex architecture + include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk + else ifneq (,$(filter rv%,$(CPU_CORE))) + # RISC-V architecture + include ${TOP}/examples/build_system/make/toolchain/riscv_$(TOOLCHAIN).mk + else + $(error Unsupported CPU_CORE architecture: $(CPU_CORE). Must start with cortex, arm, or rv) + endif +else + # Default to ARM if CPU_CORE not specified + include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk +endif #---------------------- FreeRTOS ----------------------- FREERTOS_SRC = lib/FreeRTOS-Kernel