diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h
index 11e976a42..2db42b98a 100644
--- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h
+++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h
@@ -43,6 +43,8 @@
 #define PINID_UART_TX  2
 #define PINID_UART_RX  3
 
+#define VBUS_SENSE_EN  1
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOC,
@@ -106,14 +108,6 @@ static inline void board_clock_init(void)
   __HAL_RCC_USART3_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  if  (rhport == 0) {
-    // Enable VBUS sense (B device) via pin PA9
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS;
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   (void) rhport; (void) state;
 }
diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h
index 9583a924b..319d2336a 100644
--- a/hw/bsp/stm32f4/boards/pyboardv11/board.h
+++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h
@@ -43,6 +43,8 @@
 #define PINID_UART_TX  2
 #define PINID_UART_RX  3
 
+#define VBUS_SENSE_EN  1
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOB,
@@ -106,14 +108,6 @@ static inline void board_clock_init(void)
   __HAL_RCC_USART2_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  if  (rhport == 0) {
-    // Enable VBUS sense (B device) via pin PA9
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS;
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   (void) rhport; (void) state;
 }
diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h
index 8a3fe8409..b69ebbeaf 100644
--- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h
+++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h
@@ -44,6 +44,8 @@
 #define PINID_UART_TX  2
 #define PINID_UART_RX  3
 
+#define VBUS_SENSE_EN  0
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOC,
@@ -107,15 +109,6 @@ static inline void board_clock_init(void)
   __HAL_RCC_USART2_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  // Blackpill doesn't use VBUS sense (B device) explicitly disable it
-  if  (rhport == 0) {
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN;
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   (void) rhport; (void) state;
 }
diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h
index effbf2be8..ebefeb988 100644
--- a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h
+++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h
@@ -44,6 +44,8 @@
 #define PINID_UART_TX  2
 #define PINID_UART_RX  3
 
+#define VBUS_SENSE_EN  0
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOA,
@@ -106,15 +108,6 @@ static inline void board_clock_init(void)
   __HAL_RCC_USART2_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  if (rhport == 0) {
-    // Black F407VET6 doesn't use VBUS sense (B device) explicitly disable it
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN;
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   (void) rhport; (void) state;
 }
diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h
index 19a029768..bcfa6059a 100644
--- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h
+++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h
@@ -46,6 +46,8 @@
 #define PINID_UART_RX  3
 #define PINID_VBUS0_EN 4
 
+#define VBUS_SENSE_EN  1
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOD,
@@ -114,14 +116,6 @@ static inline void board_clock_init(void)
   __HAL_RCC_USART2_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  if (rhport == 0) {
-    // Enable VBUS sense (B device) via pin PA9
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS;
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   if (rhport == 0) {
     board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN];
diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h
index 61e5de70d..0faf6fe11 100644
--- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h
+++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h
@@ -43,6 +43,8 @@
 #define PINID_UART_TX  2
 #define PINID_UART_RX  3
 
+#define VBUS_SENSE_EN  0
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOC,
@@ -106,15 +108,6 @@ static inline void board_clock_init(void)
   __HAL_RCC_USART2_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  // Blackpill doesn't use VBUS sense (B device) explicitly disable it
-  if  (rhport == 0) {
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN;
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   (void) rhport; (void) state;
 }
diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h
index d7b02e79d..1a289dfb5 100644
--- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h
+++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h
@@ -44,6 +44,8 @@
 #define PINID_UART_RX  3
 #define PINID_VBUS0_EN 4
 
+#define VBUS_SENSE_EN  1
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOD,
@@ -111,14 +113,6 @@ static inline void board_clock_init(void) {
   __HAL_RCC_USART2_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  // Enable VBUS sense (B device) via pin PA9
-  if (rhport == 0) {
-    USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS;
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   if (rhport == 0) {
     board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN];
diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h
index d5146ae3c..0689dfe87 100644
--- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h
+++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h
@@ -45,6 +45,8 @@
 #define PINID_UART_RX  3
 #define PINID_VBUS0_EN 4
 
+#define VBUS_SENSE_EN  1
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOE,
@@ -127,13 +129,6 @@ static inline void board_clock_init(void) {
   __HAL_RCC_USART2_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  if (rhport == 0) {
-    // Enable VBUS sense (B device) via pin PA9
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   if (rhport == 0) {
     board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN];
diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h
index f7026ce61..be58f8ae7 100644
--- a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h
+++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h
@@ -45,6 +45,8 @@
 #define PINID_UART_RX  3
 #define PINID_VBUS0_EN 4
 
+#define VBUS_SENSE_EN  1
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOB,
@@ -128,13 +130,6 @@ static inline void board_clock_init(void)
   __HAL_RCC_USART3_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  if (rhport == 0) {
-    // Enable VBUS sense (B device) via pin PA9
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   if (rhport == 0) {
     board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN];
diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h
index 9a348f33f..b1633b395 100644
--- a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h
+++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h
@@ -46,6 +46,8 @@
 #define PINID_UART_RX  3
 #define PINID_VBUS0_EN 4
 
+#define VBUS_SENSE_EN  1
+
 static board_pindef_t board_pindef[] = {
   { // LED
     .port = GPIOB,
@@ -117,14 +119,6 @@ static inline void board_clock_init(void)
   __HAL_RCC_USART3_CLK_ENABLE();
 }
 
-static inline void board_vbus_sense_init(uint8_t rhport) {
-  if (rhport == 0) {
-    // Enable VBUS sense (B device) via pin PA9
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
-    USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
-  }
-}
-
 static inline void board_vbus_set(uint8_t rhport, bool state) {
   if (rhport == 0) {
     board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN];
diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c
index 025f6a08c..2170faca7 100644
--- a/hw/bsp/stm32f4/family.c
+++ b/hw/bsp/stm32f4/family.c
@@ -180,11 +180,16 @@ void board_init(void) {
 #endif
 
 #if CFG_TUD_ENABLED
-  board_vbus_sense_init(BOARD_TUD_RHPORT);
+  tud_configure_dwc2_t cfg = {
+    .bm_double_buffered = 0,
+    .vbus_sensing = VBUS_SENSE_EN
+  };
+  tud_configure(BOARD_TUD_RHPORT, TUD_CFGID_DWC2, &cfg);
+  board_vbus_set(BOARD_TUD_RHPORT, false);
 #endif
 
 #if CFG_TUH_ENABLED
-  board_vbus_set(BOARD_TUD_RHPORT, true);
+  board_vbus_set(BOARD_TUH_RHPORT, true);
 #endif
 }