1dbbfdfe45
clean up
2021-02-24 12:34:23 +07:00
ec018fbf4e
clean up jlink default interface
2020-10-08 17:17:37 +07:00
4ecedc70c8
fix vector assign
2020-09-03 23:48:56 +07:00
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
1cee2da7b9
revert to use __USE_LPCOPEN
...
properly init fpu on LPC M4
2020-09-03 12:58:09 +07:00
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
58cedf4c06
usb0 host on mcb1800 work with fullspeed mode.
...
use usbh_edpt_open() to correctly map ep2drv[]
2020-05-19 00:55:43 +07:00
905a80d1b2
temporarily remove osal_task_delay() from osal
...
- add hcd_uframe_number() API, update EHCI to return uframe number
- get host running on ea4357
2020-05-04 14:11:58 +07:00
4a3a448340
clean up things, add makefile for host example
2020-05-04 00:29:52 +07:00
9538ca7d74
add uart for mcb1800
2020-05-03 14:50:12 +07:00
e4570c35f7
add uart for ea4357
2020-04-20 00:27:35 +07:00
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
dc4bf02dcb
mass rename tud_isr to tud_irq_handler
2020-04-06 17:04:49 +07:00
6a1416d18a
fix cortex M7, M23, M33 freertos build
2020-03-11 00:47:13 +07:00
487b887f80
freertos demo use static only for most optmized sram
2020-03-11 00:09:37 +07:00
3ea95c2ab6
clean up LD_FILE using $(BOARD)
...
make it easier to duplicate bsp
2020-03-07 17:49:30 +07:00
a02e723d09
rename dcd lpc18_43 to transdimension
2019-11-22 14:54:23 +07:00
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
cd96b3de86
update makefile for lpc boards
2019-11-11 11:51:51 +07:00
1684cb06b7
update makefile for lpc mcu
2019-11-11 11:24:10 +07:00
6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
4f4182e171
clean up lpc makefile
2019-09-09 12:39:58 +07:00
8ac115a33e
clean up
2019-09-09 12:25:39 +07:00
0ab8829e55
fix segger embbeded studio compile issue
2019-08-31 23:53:10 +07:00
e5e73ed76c
drop board_* in bsp c file
...
move hw/cmsis to hw/mcu/nordic since only nrf uses it.
2019-08-23 23:35:55 +07:00
6e9324e29c
clean up
2019-05-15 18:16:48 +07:00
3278a9765b
ea4357 build with makefile, add to travis
2019-05-15 18:01:58 +07:00
7bd16aaf9b
add button for ea4357
2019-05-15 17:52:29 +07:00
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
5f3ab2afe1
rename board_led_control to board_led_write
2019-04-02 18:16:04 +07:00
8457d0d14c
add board_button_read()
2019-04-01 18:35:37 +07:00
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
29e075b8b9
clean up bsp, adde board_millis()
2019-03-23 22:31:07 +07:00
df1aac44b8
add board_noos_millis() for blinky
2019-03-23 16:51:07 +07:00
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
20fb416783
clean board uart read & write
2019-03-20 20:58:27 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
2a60427bdc
rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistency
2018-12-14 15:30:54 +07:00
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
5d4d3431c2
host port plugged isr detect, but control xfer not work
2018-12-06 00:10:49 +07:00
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
c1336dff03
lpc move Chip_USB_Init() out of stack to bsp
2018-12-05 11:53:56 +07:00
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
