268ab9eaa8
Merge pull request #399 from duempel/redesign_synopsys_receive
...
Improvements to Synopsys EP OUT
2020-06-29 16:02:40 +07:00
99df7789a7
Add author name to dcd_synopsys.c
2020-06-29 10:55:03 +02:00
4f69bcea7e
Remove EP0 remaining bytes manipulation
...
Renaming edpt_xact to edpt_schedule_packets
2020-06-26 17:18:25 +02:00
b2ef8cdd42
dcd_samd: Provide implementation for OPT_MCU_SAME5X
2020-06-25 18:51:04 -05:00
d4d6e06c1d
added OPT_MCU_SAME5X option
2020-06-24 00:53:17 +07:00
067287ef91
Add transaction (edpt_xact) as sub transfer
...
A transfer can have one or multiple transactions.
Usually only EP0 splits one xfer into multiple xact.
2020-06-18 17:18:28 +02:00
9ffb9b69a4
Disable SOF in dcd_stm32_fsdev
...
Signed-off-by: Mengsk <admin@hifiphile.com >
2020-06-18 14:18:00 +02:00
57b553e023
Fix IAR warnings.
...
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
2020-06-17 10:08:33 +02:00
bc7e24b659
Fix wrong comment for IAD checks.
2020-06-14 14:22:10 +02:00
b25bbf4776
Fix alignment.
2020-06-14 12:58:16 +02:00
3012175351
Fix alignment.
2020-06-14 12:57:00 +02:00
48b2e6cf78
Fix too strict checks on subclass and interface of iad descriptor.
2020-06-13 13:51:50 +02:00
5efeaf2ac1
Merge pull request #413 from kasjer/kasjer/ble-over-usb
...
Bluetooth HCI transport over USB
2020-05-31 15:07:56 +07:00
d6d29897f3
add get device qualifier descriptor
2020-05-28 23:16:16 +07:00
56d46483e4
Add bt hci device class
...
Code implements USB transport for bluetooth HCI.
2020-05-28 10:58:49 +02:00
077437b3dc
Add non standard request handling in class
...
For some reason bluetooth stack implementations send class requests
to device instead of interface.
To implement HCI interface over USB non device addressed requests
for class need to be handled.
2020-05-28 10:11:37 +02:00
53b749fd72
check max_len for vendor and hid
2020-05-28 14:44:26 +07:00
fb214f7cf7
rename to drv_len to be consistent
2020-05-28 13:57:49 +07:00
10cd3f24bf
initial transfer failed in open() shouldn't cause the driver open to fail.
2020-05-28 13:48:02 +07:00
c1db36a15c
update vendor open()
2020-05-28 12:19:06 +07:00
bec5b5f9da
update usbtmc open()
2020-05-28 12:13:48 +07:00
13860e9f94
update net open()
2020-05-28 11:51:25 +07:00
8f560bf275
update midi open()
2020-05-28 11:41:37 +07:00
89a3d1f6d1
update hid open()
2020-05-28 11:19:12 +07:00
7a15d2e0d2
improve msc
2020-05-28 00:56:33 +07:00
2eeeda1bcf
change signature for dfu runtime
2020-05-28 00:46:32 +07:00
e340404968
changing usbd driver open() return type, add max_len
...
only done with cdc and msc, push this interim for feedback first
2020-05-27 19:01:59 +07:00
ff9994116e
fix nrf hanged (blocking wait) when called within critical section
2020-05-21 21:22:12 +07:00
8b66098335
fix freeRTOS logic
2020-05-20 15:21:11 +07:00
a0fe3a80e7
remove queue lock/unlock per review
2020-05-20 15:09:46 +07:00
d8a15aca77
remove osal_queue_t const qhdl from osal API
...
since it doesn't make any differences.
2020-05-20 14:38:34 +07:00
88a455a9b9
added tud_task_event_ready()
...
to check if there is pending events in the tud task without executing
it. Useful to check before entering low power mode with WFI/WFE
2020-05-20 14:31:45 +07:00
4e8d414bc6
added osal_queue_empty() API
...
ported for osal none/freertos/mynewt
2020-05-20 13:38:41 +07:00
550746097b
fix cast-align warning for nuc505
2020-05-18 13:03:41 +07:00
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
42edbc0006
Allow EP0 to use xfer sizes larger than one packet
2020-05-15 22:26:14 +02:00
28696de390
Interrupt time improvements
2020-05-15 18:21:44 +02:00
b0d49e55de
refactor copy to and from fifo
2020-05-14 14:24:55 +07:00
46875a3912
Optimize FIFO for byte transfer.
...
Signed-off-by: Mengsk <admin@hifiphile.com >
2020-05-13 23:54:23 +02:00
4e6aa0d81d
Merge pull request #390 from hathach/detect-nrf-softdevice
...
detect if SD is actually present on the flash using SD magic
2020-05-12 14:35:45 +07:00
3401e0f6ff
Synopsys OUT EP improvements:
...
- Use register based XFRSIZ to determine transfer complete
(xfer->queued_len and xfer->short_packet were deleted)
- Pop out as many RxFIFO data entries as available within a IRQ call
- less application interruption due to XFRC calls
2020-05-08 18:10:48 +02:00
f02ad1d0dc
Add IAR compiler attribute and endian support.
2020-05-08 13:29:33 +02:00
eeb076454b
add CFG_TUSB_DEBUG_PRINTF() for log retargeting
2020-05-08 12:56:32 +07:00
f9f0873b72
Merge pull request #393 from xobs/fix-debug-warning
...
device: fix build warning when CFG_TUSB_DEBUG >= 2
2020-05-08 12:38:50 +07:00
63bd8d2e44
device: fix build warning when CFG_TUSB_DEBUG >= 2
...
The function is defined inside of a function body which generates a
warning. Circuit Python treats these warnings as errors, and so
refuses to build with debugging enabled:
../../lib/tinyusb/src/device/usbd_control.c: In function 'usbd_control_xfer_cb':
../../lib/tinyusb/src/device/usbd_control.c:195:19: error: nested extern declaration of 'usbd_driver_print_control_complete_name' [-Werror=nested-externs]
195 | extern void usbd_driver_print_control_complete_name(bool (*control_complete) (uint8_t, tusb_control_request_t const *));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [../../py/mkrules.mk:55:
build-simmel/lib/tinyusb/src/device/usbd_control.o] Error 1
Move the declaration to the top of the function to silence this warning.
Signed-off-by: Sean Cross <sean@xobs.io >
2020-05-07 19:03:40 +08:00
58b99e59d4
detect if SD is actually present on the flash using SD magic
...
even with SOFTDEVICE_PRESENT defined, SD may not be present on actual
flash.
2020-05-05 23:07:56 +07:00
101f234a16
Merge pull request #387 from duempel/redesign_transmit_synopsys
...
Redesign of Synopsys device transmission
2020-05-04 14:41:20 +07:00
fd69cc3dcc
clean up
...
renaming function and variables
changing indent size
2020-05-04 07:59:13 +02:00
0e30afa691
abstract all UDP_CSR
2020-05-02 18:24:23 +07:00
3ad0cd041b
clean up
2020-05-02 16:29:22 +07:00
