2b1c7730b7
fix hs port1 build with net endpoint
2020-06-16 00:53:06 +07:00
667eaa6dd6
fix stm32h743 priority with freeRTOS
2020-06-16 00:03:52 +07:00
2dd1be13e5
Enhance EP FIFO allocation for both Fullspeed and Highspeed
...
- Update shared RX FIFO calculation with FS/HS
- IN FIFO EP
- Interrupt -> use EPSize
- Bulk/ISO -> use max(EPSize, remaining-fifo / non-opened-EPIN)
2020-06-15 23:17:49 +07:00
4399dd1b06
cherry pick PR399 commit : Interrupt time improvements
2020-06-14 19:13:31 +07:00
f438aedccb
overwrite setup packet
2020-06-14 18:29:38 +07:00
95966c2201
improve usbd log for control transfer
2020-06-14 18:29:02 +07:00
a347de6e50
revert CFG_TUSB_RHPORT0_MODE to previous way
2020-06-14 18:28:45 +07:00
e92118635c
adding speed detect on bus reset
2020-06-01 13:40:18 +07:00
710c54f8cb
allow hs ep open with 512 bytes
2020-06-01 01:36:09 +07:00
f771afe6af
fixed EP0 size to 64 since LS is not supported in device mode
...
- set turn-around and report actual speed in Enum Done
- add dcd_event_bus_reset() helper to report speed
2020-05-31 23:43:29 +07:00
5ffba8536d
able to detect as hs
2020-05-31 19:41:22 +07:00
d4bf777c94
try to get synopsys work with OTG HS + external PHY
2020-05-27 11:01:33 +07:00
b4804d1592
random clean up for tdi
2020-05-26 22:15:38 +07:00
0482f0d686
update h743eval with rhport=1 highspeed
2020-05-26 22:15:00 +07:00
947c3eb10d
multiple port support for global otg base
2020-05-26 16:07:48 +07:00
b7ab60aa44
suporting multiple port (OTG FS + HS) for stm32
2020-05-26 15:52:02 +07:00
fad088719e
merge CFG_TUSB_RHPORT1_MODE into CFG_TUSB_RHPORT0_MODE
...
each port is 1 byte for easy maintenance
2020-05-26 15:21:23 +07:00
ff9994116e
fix nrf hanged (blocking wait) when called within critical section
2020-05-21 21:22:12 +07:00
8b66098335
fix freeRTOS logic
2020-05-20 15:21:11 +07:00
a0fe3a80e7
remove queue lock/unlock per review
2020-05-20 15:09:46 +07:00
d8a15aca77
remove osal_queue_t const qhdl from osal API
...
since it doesn't make any differences.
2020-05-20 14:38:34 +07:00
88a455a9b9
added tud_task_event_ready()
...
to check if there is pending events in the tud task without executing
it. Useful to check before entering low power mode with WFI/WFE
2020-05-20 14:31:45 +07:00
4e8d414bc6
added osal_queue_empty() API
...
ported for osal none/freertos/mynewt
2020-05-20 13:38:41 +07:00
550746097b
fix cast-align warning for nuc505
2020-05-18 13:03:41 +07:00
1a8ce043ed
enable -Wcast-align
...
suppress vendor sdk driver at board.mk
2020-05-17 14:24:15 +07:00
b0d49e55de
refactor copy to and from fifo
2020-05-14 14:24:55 +07:00
46875a3912
Optimize FIFO for byte transfer.
...
Signed-off-by: Mengsk <admin@hifiphile.com >
2020-05-13 23:54:23 +02:00
4e6aa0d81d
Merge pull request #390 from hathach/detect-nrf-softdevice
...
detect if SD is actually present on the flash using SD magic
2020-05-12 14:35:45 +07:00
f02ad1d0dc
Add IAR compiler attribute and endian support.
2020-05-08 13:29:33 +02:00
eeb076454b
add CFG_TUSB_DEBUG_PRINTF() for log retargeting
2020-05-08 12:56:32 +07:00
f9f0873b72
Merge pull request #393 from xobs/fix-debug-warning
...
device: fix build warning when CFG_TUSB_DEBUG >= 2
2020-05-08 12:38:50 +07:00
63bd8d2e44
device: fix build warning when CFG_TUSB_DEBUG >= 2
...
The function is defined inside of a function body which generates a
warning. Circuit Python treats these warnings as errors, and so
refuses to build with debugging enabled:
../../lib/tinyusb/src/device/usbd_control.c: In function 'usbd_control_xfer_cb':
../../lib/tinyusb/src/device/usbd_control.c:195:19: error: nested extern declaration of 'usbd_driver_print_control_complete_name' [-Werror=nested-externs]
195 | extern void usbd_driver_print_control_complete_name(bool (*control_complete) (uint8_t, tusb_control_request_t const *));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [../../py/mkrules.mk:55:
build-simmel/lib/tinyusb/src/device/usbd_control.o] Error 1
Move the declaration to the top of the function to silence this warning.
Signed-off-by: Sean Cross <sean@xobs.io >
2020-05-07 19:03:40 +08:00
58b99e59d4
detect if SD is actually present on the flash using SD magic
...
even with SOFTDEVICE_PRESENT defined, SD may not be present on actual
flash.
2020-05-05 23:07:56 +07:00
101f234a16
Merge pull request #387 from duempel/redesign_transmit_synopsys
...
Redesign of Synopsys device transmission
2020-05-04 14:41:20 +07:00
fd69cc3dcc
clean up
...
renaming function and variables
changing indent size
2020-05-04 07:59:13 +02:00
0e30afa691
abstract all UDP_CSR
2020-05-02 18:24:23 +07:00
3ad0cd041b
clean up
2020-05-02 16:29:22 +07:00
ac3c645dc1
fix EP0 data toggle issue
2020-05-02 16:09:28 +07:00
2a479175ae
remove toggle walkaround, fix control stall race condition
2020-05-02 14:51:21 +07:00
a74a823b0a
fix dcd samd race condition with setup packet
...
setup packet can complete together with previous status (in & out).
Always make sure to prepare valid buffer for holding setup packet when
queuing control status.
2020-04-30 00:29:47 +07:00
59ff208c65
Changed switch into if statements
2020-04-29 12:37:29 +02:00
3e6feb7f6d
Redesign of Synopsys device transmission
...
Changes:
- checking if tx buffer empty interrupt is masked
- process more than one packet in isr
- mask tx buffer empty just after all bytes were written
- use of transmit_fifo_packet instead of transmit_packet
2020-04-29 11:32:22 +02:00
6f4b6a1d03
remove the use of TU_VERIFY_HDLR
2020-04-29 11:31:27 +07:00
d4511186a2
Merge pull request #383 from kasjer/kasjer/fox-busy-flag-race-condition
...
Fix endpoint busy flag race condition
2020-04-29 10:12:31 +07:00
fcdb22b2f9
fix typo
2020-04-28 10:53:43 +07:00
63cefb7615
Fix endpoint busy flag race condition
...
Busy flag was set to true after call to dcd_edpt_xfer().
In some cased it was possible that transfer finished before function
ended.
In this case busy flag could be set to false before it was set to
true.
Then setting it to true after dcd_edpt_xfer() made edpoint busy forever.
This change marks endpoint as busy before transfer is started to
avoid race condition.
2020-04-27 16:42:35 +02:00
958b5510cb
added comment for hw clearing TXFE
2020-04-27 13:17:47 +07:00
e785b09118
TXFE is read only bit
2020-04-27 12:06:14 +07:00
d0487088ac
revert a change to net driver
2020-04-26 23:04:17 +07:00
00fcf829a1
sync synopsis fix for esp32s2
2020-04-26 22:41:04 +07:00
