8642c2045c
update dcd ip3511 for better multiple rhport support
2021-04-24 10:44:14 +07:00
5c5d4b189f
add lpc55 uart write
2021-04-22 19:24:19 +07:00
a2be6c1472
correct boot stage2 for itsybitsy and qt rp2040
2021-04-19 14:03:29 +07:00
01801c881b
Merge pull request #783 from alisitsyn/esp-based_on_334e95f
...
WIP: Add new Espressif target esp32s3 for tinyUSB
2021-04-19 13:01:50 +07:00
faae19f560
update ci build
2021-04-18 15:44:50 +07:00
0517377dcb
add stm32f072eval to group
2021-04-18 15:44:34 +07:00
4c8750badb
add f070 nucleo to group
2021-04-18 14:26:07 +07:00
a5b406da51
create stm32f0 group
2021-04-18 13:24:34 +07:00
9fceed39fc
When used with FreeRTOS, lower the interrupt priority for OTG_FS_IRQn
2021-04-17 23:43:03 +01:00
38cc459c93
Merge branch 'master' into alisitsyn-esp-based_on_334e95f
2021-04-18 01:30:19 +07:00
70c89da7ba
Change LED_STATE_ON to 0 for f401 and f411 blackpill boards
2021-04-16 15:51:19 +01:00
f5e02e72ed
espressif: group boards using target name as a family
...
`hw\bsp` separate one family folder to esp32s2, esp32s3
add board specific board.cmake file to override board specific options(features)
fix examples and test scripts to use new family approach
2021-04-16 15:41:42 +02:00
2f0cb8b5f1
tinyusb: add support of esp32s3 target
...
add support of new esp32s3 target and the board
update the roles.mk wrapper to allow dfu flashing of espressif chip
update examples to allow compilation for esp32s3_addax_1 board
once the code is tested the PR to original tinyusb repo will be submitted
2021-04-16 13:38:00 +02:00
62a0d5b42d
Changed LED_PIN to 17, LED_STATE_ON to 0
2021-04-15 16:12:19 +01:00
c8bb0020ea
update rp2040 to use pico-sdk externally
...
also try to update ci
2021-04-11 13:37:07 +07:00
bebc910447
remove pico-sdk as submodule
2021-04-11 13:19:51 +07:00
7c8b4991f1
Add support for SAM L22 family
2021-04-09 17:33:14 -04:00
65a04f02b6
add sltb009a bsp
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com >
2021-03-31 23:45:33 +01:00
ff2978d95f
added comments for JLink connection work.
2021-03-31 22:15:03 +09:00
25057022e3
add a submodule of Renesas RX family to hw/mcu/renesas/rx
2021-03-31 21:53:15 +09:00
74c8887c8e
removed a submodule for Renesas
2021-03-31 21:50:53 +09:00
5a0c594c71
move rx63n into its own family
2021-03-29 23:54:44 +07:00
30687daf9b
added a submodule dependency
2021-03-28 16:45:53 +09:00
0e0f9a8da3
added a submodule for RX63N
2021-03-28 00:46:08 +09:00
0b76a2da88
added a setting for RX63X
2021-03-28 00:34:29 +09:00
5f4e6dafc5
added short-enums into CFLAGS
2021-03-28 00:10:53 +09:00
4c832a9195
Set newlib as the default library
2021-03-27 22:21:47 +09:00
eab214e07c
added settings for LWIP and FreeRTOS
2021-03-27 19:12:34 +09:00
e48b2c681e
fixed definitions for stack areas
2021-03-27 16:00:56 +09:00
f8cf88f918
update for gr_citurs
2021-03-26 19:32:39 +09:00
18be454011
added board files
2021-03-26 19:30:53 +09:00
fb661a99bd
added efm32gg12 family cmsis
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com >
2021-03-23 19:00:50 +00:00
143582870c
add efm32gg12 family
...
Signed-off-by: Rafael Silva <silvagracarafael@gmail.com >
2021-03-23 18:59:21 +00:00
8e6f298aa1
Merge upstream TinyUSB master
2021-03-21 09:53:57 +01:00
1f9b7b0c48
SAM54 Xplained Pro: update board setup documentation
2021-03-21 09:48:49 +01:00
1a5a113655
SAM54 Xplained Pro: reduce board setup code for maintenance
...
The board now runs off the internal oscillator at 48 MHz.
This is sufficient to run the TinyUSB examples.
A better performing clock setup is keep in the file as init_clock_xtal()
as an example.
2021-03-21 09:43:29 +01:00
a2006ce214
SAM 54 Xplained Pro: remove board specific define
2021-03-21 09:38:02 +01:00
5e74a7b548
Fixed case in linker script name
2021-03-19 12:27:44 -07:00
2f6f931553
Removed asserts
2021-03-19 12:12:09 -07:00
aa54135087
Initial commit; copied from stmf072-disco and modified for -EVAL board
2021-03-19 10:57:58 -07:00
249852d25c
use boot2_generic_03h for adafruit feather rp2040
...
- also use boot2_generic_03h for now for itsy bitsy and qt rp2040
- change default flash target for rp2040 to flash-pyocd
2021-03-18 19:53:39 +07:00
253430a765
add example specific DEPS_SUBMODULES
2021-03-18 16:28:44 +07:00
b221cedf80
spaces
2021-03-17 21:36:52 +07:00
2307fc3023
move esp32s2 and rp2040 target rule to its family.mk
2021-03-17 20:13:22 +07:00
ed8f117dd1
explicitly add dcd source file without vendor/family
2021-03-17 16:52:07 +07:00
01ec0d49ca
SAM E54 XPlained Pro: use proper defines SPI->USART for board init
2021-03-13 14:51:16 +01:00
bcf9c8cb27
SAM E54 XPlained Pro: free up DPLL1 for application
2021-03-13 14:50:55 +01:00
1cdd1b0209
Update pico sdk 1.1.0 ( #712 )
...
* update pico-sdk to 1.1.0
also correct fetch_submodule_if_empty behavior
2021-03-10 13:26:14 +07:00
7afe1d9e16
clean up
...
some how lpc55 ci cannot build without pre-checkout lib/sct_neopixel
2021-03-05 22:49:29 +07:00
ca6abea97d
nrf add lib/CMSIS_5 to DEPS_SUBMODULES
2021-03-05 22:30:03 +07:00
