mirror of
https://github.com/hathach/tinyusb.git
synced 2026-08-18 19:14:32 +00:00
4b1c8d16f7
Documentation tooling:
- Add the `build-doc` skill and `tools/build_doc.py` wrapper for local
Sphinx builds (clean / -W / open).
- Enable Markdown (MyST) in conf.py and auto-collect
examples/{device,host,dual}/*/README.md into a 3-level Examples nav
(Examples > Device/Host/Dual > example), noting each page's source
location and normalizing headings to a single H1.
- Remove the stale `.claude/commands/build-doc.md`; point the AGENTS.md
Documentation section at the skill.
Example docs:
- Add a README.md for every device/host/dual example: what it does, USB
interface table, notable tusb_config.h settings, generic CMake + Make
build steps, and how to try it.
- Fold each *_freertos variant into its base README, noting the FreeRTOS
source path and any RTOS-specific behavior.
Generated docs/examples/ output is git-ignored. Builds clean with
`sphinx-build -W`.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
MTP
A USB Media Transfer Protocol device backed by a small in-RAM filesystem that the host can browse, read from and write to.
What it does
- Presents a single MTP storage preloaded with two read-only objects:
readme.txtandtinyusb.png. - Supports core MTP operations: get device info, open/close session, get storage IDs and storage info, enumerate object handles, get object info, get object and get partial object, and a device property (device friendly name).
- Lets the host upload one additional object (SendObjectInfo / SendObject) into a 4 KB RAM buffer and delete objects (unless built read-only).
- Handles MTP class control requests: cancel, device reset and get device status.
- LED blink rate indicates bus state (not mounted / mounted / suspended).
USB Descriptors
| Interface | Class driver |
|---|---|
| 0 | MTP |
Configuration
Notable tusb_config.h settings:
#define CFG_TUD_MTP 1
#define CFG_TUD_MTP_EP_BUFSIZE 512
#define CFG_TUD_MTP_EP_CONTROL_BUFSIZE 16 // should be enough to hold data in MTP control request
// MTP device info
#define CFG_TUD_MTP_DEVICEINFO_EXTENSIONS "microsoft.com: 1.0; "
#define CFG_TUD_MTP_DEVICEINFO_SUPPORTED_OPERATIONS \
MTP_OP_GET_DEVICE_INFO, \
MTP_OP_OPEN_SESSION, \
MTP_OP_CLOSE_SESSION, \
MTP_OP_GET_STORAGE_IDS, \
MTP_OP_GET_STORAGE_INFO, \
MTP_OP_GET_OBJECT_HANDLES, \
MTP_OP_GET_OBJECT_INFO, \
MTP_OP_GET_OBJECT, \
MTP_OP_GET_PARTIAL_OBJECT, \
MTP_OP_DELETE_OBJECT, \
MTP_OP_SEND_OBJECT_INFO, \
MTP_OP_SEND_OBJECT, \
MTP_OP_RESET_DEVICE, \
MTP_OP_GET_DEVICE_PROP_DESC, \
MTP_OP_GET_DEVICE_PROP_VALUE, \
MTP_OP_SET_DEVICE_PROP_VALUE
#define CFG_TUD_MTP_DEVICEINFO_SUPPORTED_EVENTS \
MTP_EVENT_OBJECT_ADDED
#define CFG_TUD_MTP_DEVICEINFO_SUPPORTED_DEVICE_PROPERTIES \
MTP_DEV_PROP_DEVICE_FRIENDLY_NAME
#define CFG_TUD_MTP_DEVICEINFO_CAPTURE_FORMATS \
MTP_OBJ_FORMAT_UNDEFINED, \
MTP_OBJ_FORMAT_ASSOCIATION, \
MTP_OBJ_FORMAT_TEXT, \
MTP_OBJ_FORMAT_PNG
#define CFG_TUD_MTP_DEVICEINFO_PLAYBACK_FORMATS \
MTP_OBJ_FORMAT_UNDEFINED, \
MTP_OBJ_FORMAT_ASSOCIATION, \
MTP_OBJ_FORMAT_TEXT, \
MTP_OBJ_FORMAT_PNG
Building
CMake:
mkdir build && cd build
cmake -DBOARD=raspberry_pi_pico ..
cmake --build .
Make:
make BOARD=raspberry_pi_pico all
Try it
The device enumerates as an MTP device and shows up in a file browser (e.g. the Files/Explorer app, or mtp-detect / mtp-files from libmtp). You should see readme.txt and tinyusb.png; you can copy a small file onto the device and delete files.