mirror of
https://github.com/hathach/tinyusb.git
synced 2026-08-18 11:02:16 +00:00
47 lines
1.8 KiB
ReStructuredText
47 lines
1.8 KiB
ReStructuredText
Device specific known issues and workarounds
|
|
===============================================
|
|
This page lists known issues and workarounds for specific devices.
|
|
|
|
NXP LPC54600
|
|
----------------
|
|
**Severity: High**
|
|
|
|
**Not recommended for USB device applications (except high-speed host controller)**
|
|
|
|
Reference: `LPC54600 Errata Sheet`_
|
|
|
|
.. _LPC54600 Errata Sheet: https://www.nxp.com/docs/en/errata/ES_LPC546XX.pdf
|
|
|
|
The LPC54600 series have a very buggy USB controller, with 17 issues listed in the errata which is more than half of the total issues.
|
|
|
|
Most severe issues are:
|
|
|
|
- USB.2: In USB high-speed device mode, the NBytes field is not correct after BULK IN transfer
|
|
- USB.5: In USB full-speed host mode, linked list on done queue is broken.
|
|
- USB.15: USB high-speed device in endpoint TX data corruption
|
|
|
|
WCH CH32F20x/CH32V20x/CH32V30x
|
|
---------------------------------
|
|
**Severity: Medium**
|
|
|
|
**Not recommended for USB audio applications**
|
|
|
|
Reference: `CH32V30X Reference Manual`_ USBFS/USBHS controller chapter
|
|
|
|
.. _CH32V30X Reference Manual: https://www.wch-ic.com/downloads/CH32FV2x_V3xRM_PDF.html
|
|
|
|
Data corruption may occur on isochronous endpoints. Due to the lacking of FIFO for interrupt status registers, later completed transfer will overwrite `INT_ST` and `RX_LEN` register if previous transfer processing is not completed.
|
|
|
|
Other types of transfers are not affected.
|
|
|
|
Puya PY32F071/072
|
|
---------------------------------
|
|
**Severity: Very Low**
|
|
|
|
Reference: `PY32F07x Reference Manual` USBD chapter
|
|
|
|
The USB device controller (MUSB-like) has 5 application endpoints EP1-EP5 with fixed FIFO sizes
|
|
shared between IN and OUT of the same endpoint number: EP1 = 512 B, EP2-4 = 128 B, EP5 = 64 B.
|
|
This is much lower than the max ISO ep size of 1024 for high EP numbers.
|
|
Place large isochronous endpoints on EP1 and size descriptors accordingly.
|