Merge tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu into staging

RISC-V PR for 9.2

* Fix an access to VXSAT
* Expose RV32 cpu to RV64 QEMU
* Don't clear PLIC pending bits on IRQ lowering
* Make PLIC zeroth priority register read-only
* Set vtype.vill on CPU reset
* Check and update APLIC pending when write sourcecfg
* Avoid dropping charecters with HTIF
* Apply FIFO backpressure to guests using SiFive UART
* Support for control flow integrity extensions
* Support for the IOMMU with the virt machine
* set 'aia_mode' to default in error path
* clarify how 'riscv-aia' default works

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmci/tQACgkQr3yVEwxT
# gBNPAQ//dZKjjJm4Sh+UFdUslivBJYtL1rl2UUG2UqiNn/UoYh/vcHoSArljHTjt
# 8riEStnaQqXziOpMIJjIMLJ4KoiIk2SMvjNfFtcmPiPZEDEpjsTxfUxBFsBee+fI
# 4KNQKKFeljq4pa+VzVvXEqzCNJIzCThFXTZhZmer00M91HPA8ZQIHpv2JL1sWlgZ
# /HW24XEDFLGc/JsR55fxpPftlAqP+BfOrqMmbWy7x2Y+G8WI05hM2zTP/W8pnIz3
# z0GCRYSBlADtrp+3RqzTwQfK5pXoFc0iDktWVYlhoXaeEmOwo8IYxTjrvBGhnBq+
# ySX1DzTa23QmOIxSYYvCRuOxyOK9ziNn+EQ9FiFBt1h1o251CYMil1bwmYXMCMNJ
# rZwF1HfUx0g2GQW1ZOqh1eeyLO29JiOdV3hxlDO7X4bbISNgU6il5MXmnvf0/XVW
# Af3YhALeeDbHgHL1iVfjafzaviQc9+YrEX13eX6N2AjcgE5a3F7XNmGfFpFJ+mfQ
# CPgiwVBXat6UpBUGAt14UM+6wzp+crSgQR5IEGth+mKMKdkWoykvo7A2oHdu39zn
# 2cdzsshg2qcLLUPTFy06OOTXX382kCWXuykhHOjZ4uu2SJJ7R0W3PlYV8HSde2Vu
# Rj+89ZlUSICJNXXweQB39r87hNbtRuDIO22V0B9XrApQbJj6/yE=
# =rPaa
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 03:51:48 GMT
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20241031-1' of https://github.com/alistair23/qemu: (50 commits)
  target/riscv: Fix vcompress with rvv_ta_all_1s
  target/riscv/kvm: clarify how 'riscv-aia' default works
  target/riscv/kvm: set 'aia_mode' to default in error path
  docs/specs: add riscv-iommu
  qtest/riscv-iommu-test: add init queues test
  hw/riscv/riscv-iommu: add DBG support
  hw/riscv/riscv-iommu: add ATS support
  hw/riscv/riscv-iommu: add Address Translation Cache (IOATC)
  test/qtest: add riscv-iommu-pci tests
  hw/riscv/virt.c: support for RISC-V IOMMU PCIDevice hotplug
  hw/riscv: add riscv-iommu-pci reference device
  pci-ids.rst: add Red Hat pci-id for RISC-V IOMMU device
  hw/riscv: add RISC-V IOMMU base emulation
  hw/riscv: add riscv-iommu-bits.h
  exec/memtxattr: add process identifier to the transaction attributes
  target/riscv: Expose zicfiss extension as a cpu property
  disas/riscv: enable disassembly for compressed sspush/sspopchk
  disas/riscv: enable disassembly for zicfiss instructions
  target/riscv: compressed encodings for sspush and sspopchk
  target/riscv: implement zicfiss instructions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/specs/index.rst

@@ -36,3 +36,4 @@ guest hardware that is specific to QEMU.
    vmgenid
    rapl-msr
    rocker
+   riscv-iommu

docs/specs/pci-ids.rst

@@ -98,6 +98,8 @@ PCI devices (other than virtio):
   PCI ACPI ERST device (``-device acpi-erst``)
 1b36:0013
   PCI UFS device (``-device ufs``)
+1b36:0014
+  PCI RISC-V IOMMU device
 
 All these devices are documented in :doc:`index`.
 

docs/specs/riscv-iommu.rst

@@ -0,0 +1,90 @@
+.. _riscv-iommu:
+
+RISC-V IOMMU support for RISC-V machines
+========================================
+
+QEMU implements a RISC-V IOMMU emulation based on the RISC-V IOMMU spec
+version 1.0 `iommu1.0`_.
+
+The emulation includes a PCI reference device, riscv-iommu-pci, that QEMU
+RISC-V boards can use.  The 'virt' RISC-V machine is compatible with this
+device.
+
+riscv-iommu-pci reference device
+--------------------------------
+
+This device implements the RISC-V IOMMU emulation as recommended by the section
+"Integrating an IOMMU as a PCIe device" of `iommu1.0`_: a PCI device with base
+class 08h, sub-class 06h and programming interface 00h.
+
+As a reference device it doesn't implement anything outside of the specification,
+so it uses a generic default PCI ID given by QEMU: 1b36:0014.
+
+To include the device in the 'virt' machine:
+
+.. code-block:: bash
+
+  $ qemu-system-riscv64 -M virt -device riscv-iommu-pci,[optional_pci_opts] (...)
+
+This will add a RISC-V IOMMU PCI device in the board following any additional
+PCI parameters (like PCI bus address).  The behavior of the RISC-V IOMMU is
+defined by the spec but its operation is OS dependent.
+
+As of this writing the existing Linux kernel support `linux-v8`_, not yet merged,
+does not have support for features like VFIO passthrough.  The IOMMU emulation
+was tested using a public Ventana Micro Systems kernel repository in
+`ventana-linux`_.  This kernel is based on `linux-v8`_ with additional patches that
+enable features like KVM VFIO passthrough with irqbypass.  Until the kernel support
+is feature complete feel free to use the kernel available in the Ventana Micro Systems
+mirror.
+
+The current Linux kernel support will use the IOMMU device to create IOMMU groups
+with any eligible cards available in the system, regardless of factors such as the
+order in which the devices are added in the command line.
+
+This means that these command lines are equivalent as far as the current
+IOMMU kernel driver behaves:
+
+.. code-block:: bash
+
+  $ qemu-system-riscv64 \
+        -M virt,aia=aplic-imsic,aia-guests=5 \
+        -device riscv-iommu-pci,addr=1.0,vendor-id=0x1efd,device-id=0xedf1 \
+        -device e1000e,netdev=net1 -netdev user,id=net1,net=192.168.0.0/24 \
+        -device e1000e,netdev=net2 -netdev user,id=net2,net=192.168.200.0/24 \
+        (...)
+
+  $ qemu-system-riscv64 \
+        -M virt,aia=aplic-imsic,aia-guests=5 \
+        -device e1000e,netdev=net1 -netdev user,id=net1,net=192.168.0.0/24 \
+        -device e1000e,netdev=net2 -netdev user,id=net2,net=192.168.200.0/24 \
+        -device riscv-iommu-pci,addr=1.0,vendor-id=0x1efd,device-id=0xedf1 \
+        (...)
+
+Both will create iommu groups for the two e1000e cards.
+
+Another thing to notice on `linux-v8`_ and `ventana-linux`_ is that the kernel driver
+considers an IOMMU identified as a Rivos device, i.e. it uses Rivos vendor ID.  To
+use the riscv-iommu-pci device with the existing kernel support we need to emulate
+a Rivos PCI IOMMU by setting 'vendor-id' and 'device-id':
+
+.. code-block:: bash
+
+  $ qemu-system-riscv64 -M virt	\
+     -device riscv-iommu-pci,vendor-id=0x1efd,device-id=0xedf1 (...)
+
+Several options are available to control the capabilities of the device, namely:
+
+- "bus": the bus that the IOMMU device uses
+- "ioatc-limit": size of the Address Translation Cache (default to 2Mb)
+- "intremap": enable/disable MSI support
+- "ats": enable ATS support
+- "off" (Out-of-reset translation mode: 'on' for DMA disabled, 'off' for 'BARE' (passthrough))
+- "s-stage": enable s-stage support
+- "g-stage": enable g-stage support
+
+.. _iommu1.0: https://github.com/riscv-non-isa/riscv-iommu/releases/download/v1.0/riscv-iommu.pdf
+
+.. _linux-v8: https://lore.kernel.org/linux-riscv/cover.1718388908.git.tjeznach@rivosinc.com/
+
+.. _ventana-linux: https://github.com/ventanamicro/linux/tree/dev-upstream

docs/system/riscv/virt.rst

@@ -84,6 +84,19 @@ none``, as in
 
 Firmware images used for pflash must be exactly 32 MiB in size.
 
+riscv-iommu support
+-------------------
+
+The board has support for the riscv-iommu-pci device by using the following
+command line:
+
+.. code-block:: bash
+
+  $ qemu-system-riscv64 -M virt -device riscv-iommu-pci (...)
+
+Refer to :ref:`riscv-iommu` for more information on how the RISC-V IOMMU support
+works.
+
 Machine-specific options
 ------------------------