The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.
Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to replace qemu_balloon_inhibit() by something more generic.
Especially, we want to make sure that technologies that really rely on
RAM block discards to work reliably to run mutual exclusive with
technologies that effectively break it.
E.g., vfio will usually pin all guest memory, turning the virtio-balloon
basically useless and make the VM consume more memory than reported via
the balloon. While the balloon is special already (=> no guarantees, same
behavior possible afer reboots and with huge pages), this will be
different, especially, with virtio-mem.
Let's implement a way such that we can make both types of technology run
mutually exclusive. We'll convert existing balloon inhibitors in successive
patches and add some new ones. Add the check to
qemu_balloon_is_inhibited() for now. We might want to make
virtio-balloon an acutal inhibitor in the future - however, that
requires more thought to not break existing setups.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
target-arm queue:
* hw/arm/aspeed: improve QOM usage
* hw/misc/pca9552: trace GPIO change events
* target/arm: Implement ARMv8.5-MemTag for system emulation
# gpg: Signature made Fri 26 Jun 2020 16:13:27 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200626: (57 commits)
target/arm: Enable MTE
target/arm: Add allocation tag storage for system mode
target/arm: Create tagged ram when MTE is enabled
target/arm: Cache the Tagged bit for a page in MemTxAttrs
target/arm: Always pass cacheattr to get_phys_addr
target/arm: Set PSTATE.TCO on exception entry
target/arm: Implement data cache set allocation tags
target/arm: Complete TBI clearing for user-only for SVE
target/arm: Add mte helpers for sve scatter/gather memory ops
target/arm: Handle TBI for sve scalar + int memory ops
target/arm: Add mte helpers for sve scalar + int ff/nf loads
target/arm: Add mte helpers for sve scalar + int stores
target/arm: Add mte helpers for sve scalar + int loads
target/arm: Add arm_tlb_bti_gp
target/arm: Tidy trans_LD1R_zpri
target/arm: Use mte_check1 for sve LD1R
target/arm: Use mte_checkN for sve unpredicated stores
target/arm: Use mte_checkN for sve unpredicated loads
target/arm: Add helper_mte_check_zva
target/arm: Implement helper_mte_checkN
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Various fixes
* libdaxctl support to correctly align devdax character devices (Jingqi)
* initial-all-set support for live migration (Jay)
* forbid '-numa node, mem' for 5.1 and newer machine types (Igor)
* x87 fixes (Joseph)
* Tighten memory_region_access_valid (Michael) and fix fallout (myself)
* Replay fixes (Pavel)
# gpg: Signature made Fri 26 Jun 2020 14:42:17 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (31 commits)
i386: Mask SVM features if nested SVM is disabled
ibex_uart: fix XOR-as-pow
vmport: move compat properties to hw_compat_5_0
hyperv: vmbus: Remove the 2nd IRQ
kvm: i386: allow TSC to differ by NTP correction bounds without TSC scaling
numa: forbid '-numa node, mem' for 5.1 and newer machine types
osdep: Make MIN/MAX evaluate arguments only once
target/i386: Add notes for versioned CPU models
target/i386: reimplement fpatan using floatx80 operations
target/i386: reimplement fyl2x using floatx80 operations
target/i386: reimplement fyl2xp1 using floatx80 operations
target/i386: reimplement fprem, fprem1 using floatx80 operations
softfloat: return low bits of quotient from floatx80_modrem
softfloat: do not set denominator high bit for floatx80 remainder
softfloat: do not return pseudo-denormal from floatx80 remainder
softfloat: fix floatx80 remainder pseudo-denormal check for zero
softfloat: merge floatx80_mod and floatx80_rem
target/i386: reimplement f2xm1 using floatx80 operations
xen: Actually fix build without passthrough
Makefile: Install qemu-[qmp/ga]-ref.* into the directory "interop"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I'm not aware of any immediate bugs in qemu where a second runtime
evaluation of the arguments to MIN() or MAX() causes a problem, but
proactively preventing such abuse is easier than falling prey to an
unintended case down the road. At any rate, here's the conversation
that sparked the current patch:
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg05718.html
Update the MIN/MAX macros to only evaluate their argument once at
runtime; this uses typeof(1 ? (a) : (b)) to ensure that we are
promoting the temporaries to the same type as the final comparison (we
have to trigger type promotion, as typeof(bitfield) won't compile; and
we can't use typeof((a) + (b)) or even typeof((a) + 0), as some of our
uses of MAX are on void* pointers where such addition is undefined).
However, we are unable to work around gcc refusing to compile ({}) in
a constant context (such as the array length of a static variable),
even when only used in the dead branch of a __builtin_choose_expr(),
so we have to provide a second macro pair MIN_CONST and MAX_CONST for
use when both arguments are known to be compile-time constants and
where the result must also be usable as a constant; this second form
evaluates arguments multiple times but that doesn't matter for
constants. By using a void expression as the expansion if a
non-constant is presented to this second form, we can enlist the
compiler to ensure the double evaluation is not attempted on
non-constants.
Alas, as both macros now rely on compiler intrinsics, they are no
longer usable in preprocessor #if conditions; those will just have to
be open-coded or the logic rewritten into #define or runtime 'if'
conditions (but where the compiler dead-code-elimination will probably
still apply).
I tested that both gcc 10.1.1 and clang 10.0.0 produce errors for all
forms of macro mis-use. As the errors can sometimes be cryptic, I'm
demonstrating the gcc output:
Use of MIN when MIN_CONST is needed:
In file included from /home/eblake/qemu/qemu-img.c:25:
/home/eblake/qemu/include/qemu/osdep.h:249:5: error: braced-group within expression allowed only inside a function
249 | ({ \
| ^
/home/eblake/qemu/qemu-img.c:92:12: note: in expansion of macro ‘MIN’
92 | char array[MIN(1, 2)] = "";
| ^~~
Use of MIN_CONST when MIN is needed:
/home/eblake/qemu/qemu-img.c: In function ‘is_allocated_sectors’:
/home/eblake/qemu/qemu-img.c:1225:15: error: void value not ignored as it ought to be
1225 | i = MIN_CONST(i, n);
| ^
Use of MIN in the preprocessor:
In file included from /home/eblake/qemu/accel/tcg/translate-all.c:20:
/home/eblake/qemu/accel/tcg/translate-all.c: In function ‘page_check_range’:
/home/eblake/qemu/include/qemu/osdep.h:249:6: error: token "{" is not valid in preprocessor expressions
249 | ({ \
| ^
Fix the resulting callsites that used #if or computed a compile-time
constant min or max to use the new macros. cpu-defs.h is interesting,
as CPU_TLB_DYN_MAX_BITS is sometimes used as a constant and sometimes
dynamic.
It may be worth improving glib's MIN/MAX definitions to be saner, but
that is a task for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200625162602.700741-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both x87 and m68k need the low parts of the quotient for their
remainder operations. Arrange for floatx80_modrem to track those bits
and return them via a pointer.
The architectures using float32_rem and float64_rem do not appear to
need this information, so the *_rem interface is left unchanged and
the information returned only from floatx80_modrem. The logic used to
determine the low 7 bits of the quotient for m68k
(target/m68k/fpu_helper.c:make_quotient) appears completely bogus (it
looks at the result of converting the remainder to integer, the
quotient having been discarded by that point); this patch does not
change that, but the m68k maintainers may wish to do so.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081656500.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The m68k-specific softfloat code includes a function floatx80_mod that
is extremely similar to floatx80_rem, but computing the remainder
based on truncating the quotient toward zero rather than rounding it
to nearest integer. This is also useful for emulating the x87 fprem
and fprem1 instructions. Change the floatx80_rem implementation into
floatx80_modrem that can perform either operation, with both
floatx80_rem and floatx80_mod as thin wrappers available for all
targets.
There does not appear to be any use for the _mod operation for other
floating-point formats in QEMU (the only other architectures using
_rem at all are linux-user/arm/nwfpe, for FPA emulation, and openrisc,
for instructions that have been removed in the latest version of the
architecture), so no change is made to the code for other formats.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081654280.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PCA9552 has 16 GPIOs which can be used as input,
output or PWM mode. QEMU models the output GPIO with
the qemu_irq type. Let the device expose the 16 GPIOs
to allow us to later connect LEDs to these outputs.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Various code from the PCA9552 device model is generic to the
PCA955X family. We'll split the generic code in a base class
in the next commit. To ease review, first do a dumb renaming.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AspeedMachineState seems crippled. We use incorrectly 2
different structures to do the same thing. Merge them
altogether:
- Move AspeedMachine fields to AspeedMachineState
- AspeedMachineState is now QOM
- Remove unused AspeedMachine structure
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pull request
# gpg: Signature made Wed 24 Jun 2020 11:01:57 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
block/nvme: support nested aio_poll()
block/nvme: keep BDRVNVMeState pointer in NVMeQueuePair
block/nvme: clarify that free_req_queue is protected by q->lock
block/nvme: switch to a NVMeRequest freelist
block/nvme: don't access CQE after moving cq.head
block/nvme: drop tautologous assertion
block/nvme: poll queues without q->lock
check-block: enable iotests with SafeStack
configure: add flags to support SafeStack
coroutine: add check for SafeStack in sigaltstack
coroutine: support SafeStack in ucontext backend
minikconf: explicitly set encoding to UTF-8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-macppc patches
# gpg: Signature made Fri 26 Jun 2020 10:15:36 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-macppc-20200626: (22 commits)
adb: add ADB bus trace events
adb: use adb_device prefix for ADB device trace events
adb: only call autopoll callbacks when autopoll is not blocked
mac_via: rework ADB state machine to be compatible with both MacOS and Linux
mac_via: move VIA1 portB write logic into mos6522_q800_via1_write()
pmu: add adb_autopoll_block() and adb_autopoll_unblock() functions
cuda: add adb_autopoll_block() and adb_autopoll_unblock() functions
adb: add autopoll_blocked variable to block autopoll
adb: use adb_request() only for explicit requests
adb: add status field for holding information about the last ADB request
adb: keep track of devices with pending data
adb: introduce new ADBDeviceHasData method to ADBDeviceClass
mac_via: convert to use ADBBusState internal autopoll variables
pmu: convert to use ADBBusState internal autopoll variables
cuda: convert to use ADBBusState internal autopoll variables
adb: create autopoll variables directly within ADBBusState
adb: introduce realize/unrealize and VMStateDescription for ADB bus
pmu: honour autopoll_rate_ms when rearming the ADB autopoll timer
pmu: fix duplicate autopoll mask variable
cuda: convert ADB autopoll timer from ns to ms
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The existing ADB state machine is designed to work with Linux which has a different
interpretation of the state machine detailed in "Guide to the Macintosh Family
Hardware". In particular the current Linux implementation includes an extra change
to IDLE state when switching the VIA between send and receive modes which does not
occur in MacOS, and omitting this transition causes the current mac_via ADB state
machine to fail.
Rework the ADB state machine accordingly so that it can enumerate and autopoll the
ADB under both Linux and MacOS, including the addition of the new adb_autopoll_block()
and adb_autopoll_unblock() functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-20-mark.cave-ayland@ilande.co.uk>
Whilst autopoll is enabled it is necessary to prevent the ADB buffer contents
from being overwritten until the host has read back the response in its
entirety.
Add adb_autopoll_block() and adb_autopoll_unblock() functions in preparation
for ensuring that the ADB buffer contents are protected for explicit ADB
requests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-16-mark.cave-ayland@ilande.co.uk>
Rather than each ADB implementation requiring its own functions to manage
autopoll state, timers, and autopoll masks prepare to move this information
directly into ADBBusState.
Add external functions within adb.h to allow each ADB implementation to
manage the new autopoll variables.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-8-mark.cave-ayland@ilande.co.uk>
Commit 84051eb400 "adb: add property to disable direct reg 3 writes" introduced
a workaround for spurious writes to ADB register 3 when MacOS 9 enables
autopoll on the mouse device. Further analysis shows that the problem is that
only a partial request is sent, and since the len parameter is ignored then
stale data from the previous request is used causing the incorrect address
assignment.
Remove the disable-reg3-direct-writes workaround and instead check the length
parameter when the write is attempted, discarding the invalid request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-3-mark.cave-ayland@ilande.co.uk>
Merge tpm 2020/06/23 v1
# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-06-23-1:
tpm: Move backend code under the 'backends/' directory
hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"
hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header
hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h'
hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c
hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion
hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources
hw/tpm: Include missing 'qemu/option.h' header
hw/tpm: Do not include 'qemu/osdep.h' in header
hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig
backends: Add TPM files into their own directory
docs/specs/tpm: Correct header path name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
LLVM's SafeStack instrumentation does not yet support programs that make
use of the APIs in ucontext.h
With the current implementation of coroutine-ucontext, the resulting
binary is incorrect, with different coroutines sharing the same unsafe
stack and producing undefined behavior at runtime.
This fix allocates an additional unsafe stack area for each coroutine,
and sets the new unsafe stack pointer before calling swapcontext() in
qemu_coroutine_new.
This is the only place where the pointer needs to be manually updated,
since sigsetjmp/siglongjmp are already instrumented by LLVM to properly
support SafeStack.
The additional stack is then freed in qemu_coroutine_delete.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-id: 20200529205122.714-2-dbuono@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO()
can; they abort on error.
To clean up this inconsistency, rename qdev_prop_set_drive() to
qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that
aborts on error.
Coccinelle script to update callers:
@ depends on !(file in "hw/core/qdev-properties-system.c")@
expression dev, name, value;
symbol error_abort;
@@
- qdev_prop_set_drive(dev, name, value, &error_abort);
+ qdev_prop_set_drive(dev, name, value);
@@
expression dev, name, value, errp;
@@
- qdev_prop_set_drive(dev, name, value, errp);
+ qdev_prop_set_drive_err(dev, name, value, errp);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
qdev_prop_set_netdev() fails when the property already has a non-null
value. Seems to go back to commit 30c367ed44
"qdev-properties-system.c: Allow vlan or netdev for -device, not
both", v1.7.0. Board code doesn't expect failure, and crashes:
$ qemu-system-x86_64 --nodefaults -nic user -netdev user,id=nic0 -global e1000.netdev=nic0
Unexpected error in error_set_from_qdev_prop_error() at /work/armbru/qemu/hw/core/qdev-properties.c:1101:
qemu-system-x86_64: Property 'e1000.netdev' doesn't take value '__org.qemu.nic0
'
Aborted (core dumped)
-device and device_add handle the failure:
$ qemu-system-x86_64 -nodefaults -netdev user,id=net0 -netdev user,id=net1 -device e1000,netdev=net0,netdev=net1
qemu-system-x86_64: -device e1000,netdev=net0,netdev=net1: Property 'e1000.netdev' doesn't take value 'net1'
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -netdev user,id=net0 -netdev user,id=net1 -global e1000.netdev=net0
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) qemu-system-x86_64: warning: netdev net0 has no peer
qemu-system-x86_64: warning: netdev net1 has no peer
device_add e1000,netdev=net1
Error: Property 'e1000.netdev' doesn't take value 'net1'
Perhaps netdev property override could be made to work. Perhaps it
should. I'm not the right guy to figure this out. What I can do is
improve the error message a bit:
(qemu) device_add e1000,netdev=net1
Error: -global e1000.netdev=... conflicts with netdev=net1
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-11-armbru@redhat.com>
Drives with interface types other than if=none are for onboard
devices. Unfortunately, any such drives the board doesn't pick up can
still be used with -device, like this:
$ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) info block
bogus: [not inserted]
Attached to: /machine/peripheral-anon/device[0]
Removable device: not locked, tray closed
(qemu) info qtree
bus: main-system-bus
type System
[...]
bus: ide.1
type IDE
dev: ide-cd, id ""
---> drive = "bogus"
[...]
unit = 0 (0x0)
[...]
This kind of abuse has always worked. Deprecate it:
qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
Helper function fdctrl_init_isa() is less than helpful: one of three
places creating "isa-fdc" devices use it. Open-code it there, and
drop the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-6-armbru@redhat.com>
The floppy controller devices desugar their drive properties into
floppy devices (since commit a92bd191a4 "fdc: Move qdev properties to
FloppyDrive", v2.8.0). This involves some bad magic in
fdctrl_connect_drives(), and exists for backward compatibility.
The functions for boards to create floppy controller devices
fdctrl_init_isa(), fdctrl_init_sysbus(), and sun4m_fdctrl_init()
desugar -drive if=floppy to these floppy controller drive properties.
If you use both -drive if=floppy (or its -fda / -fdb sugar) and
-global isa-fdc for the same floppy device, -global silently loses the
conflict, and both backends involved end up with the floppy device
frontend attached, as demonstrated by iotest 172 (see commit before
previous). This is wrong.
Desugar -drive if=floppy straight to floppy devices instead, with
helper fdctrl_init_drives(). The conflict now gets rejected cleanly:
first, fdctrl_connect_drives() creates the floppy for the controller's
property, then fdctrl_init_drives() attempts to create the floppy for
-drive if=floppy, but fails because the unit is already in use.
Output of iotest 172 changes in three ways:
1. The clash gets rejected.
2. In one test case, "info qtree" has the floppy devices swapped, and
"info block" has their QOM paths swapped. This is because the
floppy device for -fda now gets created after the one for -global
isa-fdc.driveB.
3. The error message for -global floppy.drive=floppy0 changes. Before
the patch, we set isa-fdc.driveA to -fda's block backend, then
create the floppy device for it, then move the backend from
isa-fdc.driveA to floppy.drive. Floppy creation fails when
applying -global floppy.drive=floppy0, because floppy0 is still
attached to isa-fdc. After the patch, we create the floppy for
-fda, then set its drive property to floppy0. Now floppy creation
succeeds, but setting the drive property fails, because -global
already set it. Yes, this is exasperatingly complicated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-5-armbru@redhat.com>
'ARM SBCon two-wire serial bus interface' is the official
name describing the pair of registers used to bitbanging
I2C in the Versatile boards.
Make the private VersatileI2CState structure as public
ArmSbconI2CState.
Add the TYPE_ARM_SBCON_I2C, alias to our current
TYPE_VERSATILE_I2C model.
Rename the memory region description as 'arm_sbcon_i2c'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the current TYPE_RX62N_MCU an abstract class, and
generate TYPE_R5F562N7_MCU and TYPE_R5F562N8_MCU models.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
