At present riscv_csrrw_check() checks the CSR predicate() against
NULL and throws RISCV_EXCP_ILLEGAL_INST if it is NULL. But this is
a pure software check, and has nothing to do with the emulation of
the hardware behavior, thus it is inappropriate to return illegal
instruction exception when software forgets to install the hook.
Change to use g_assert() instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-4-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The priority policy of riscv_csrrw_check() was once adjusted in
commit eacaf44019 ("target/riscv: Fix priority of csr related check in riscv_csrrw_check")
whose commit message says the CSR existence check should come before
the access control check, but the code changes did not agree with
the commit message, that the predicate() check actually came after
the read / write check.
In fact this was intentional. Add some comments there so that people
won't bother trying to change it without a solid reason.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Message-ID: <20230228104035.1879882-3-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The gdbstub CSR XML is dynamically generated according to the result
of the CSR predicate() result. This has been working fine until
commit 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
introduced the privilege spec version check in riscv_csrrw_check().
When debugging the 'sifive_u' machine whose priv spec is at 1.10,
gdbstub reports priv spec 1.12 CSRs like menvcfg in the XML, hence
we see "remote failure reply 'E14'" message when examining all CSRs
via "info register system" from gdb.
Add the priv spec version check in the CSR XML generation logic to
fix this issue.
Fixes: 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230228104035.1879882-2-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V defines a handful of extensions related to floating point, along
with various relationships between these and other extensions. This
patch set adds support for the Zvfh, Zvhfmin, and Zve64d extensions;
along with a handful of fixes and cleanups related to the other
floating-point extension relationships.
* b4-shazam-merge
target/riscv: Expose properties for Zv* extensions
target/riscv: Simplify check for EEW = 64 in trans_rvv.c.inc
target/riscv: Fix check for vector load/store instructions when EEW=64
target/riscv: Add support for Zvfh/zvfhmin extensions
target/riscv: Remove rebundunt check for zve32f and zve64f
target/riscv: Replace check for F/D to Zve32f/Zve64d in trans_rvv.c.inc
target/riscv: Simplify check for Zve32f and Zve64f
target/riscv: Indent fixes in cpu.c
target/riscv: Add propertie check for Zvfh{min} extensions
target/riscv: Fix relationship between V, Zve*, F and D
target/riscv: Add cfg properties for Zv* extensions
target/riscv: Simplify the check for Zfhmin and Zhinxmin
target/riscv: Fix the relationship between Zhinxmin and Zhinx
target/riscv: Fix the relationship between Zfhmin and Zfh
Message-ID: <20230215020539.4788-1-liweiwei@iscas.ac.cn>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISCV_FEATURE_MMU is set whether cpu->cfg.mmu is set, so let's just use
the flag directly instead.
With this change the enum is also removed. It is worth noticing that
this enum, and all the RISCV_FEATURES_* that were contained in it,
predates the existence of the cpu->cfg object. Today, using cpu->cfg is
an easier way to retrieve all the features and extensions enabled in the
hart.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-10-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
At this moment, and apparently since ever, we have no way of enabling
RISCV_FEATURE_MISA. This means that all the code from write_misa(), all
the nuts and bolts that handles how to properly write this CSR, has
always been a no-op as well because write_misa() will always exit
earlier.
This seems to be benign in the majority of cases. Booting an Ubuntu
'virt' guest and logging all the calls to 'write_misa' shows that no
writes to MISA CSR was attempted. Writing MISA, i.e. enabling/disabling
RISC-V extensions after the machine is powered on, seems to be a niche
use.
After discussions in the mailing list, most notably in [1], we reached
the consensus that this code is not suited to be exposed to users
because it's not well tested, but at the same time removing it is a bit
extreme because we would like to fix it, and it's easier to do so with
the code available to use instead of fetching it from git log.
The approach taken here is to get rid of RISCV_FEATURE_MISA altogether
and use a new experimental flag called x-misa-w. The default value is
false, meaning that we're keeping the existing behavior of doing nothing
if a write_misa() is attempted. As with any existing experimental flag,
x-misa-w is also a temporary flag that we need to remove once we fix
write_misa().
[1] https://lists.gnu.org/archive/html/qemu-devel/2023-02/msg05092.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Weiwei Li<liweiwei@iscas.ac.cn>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-ID: <20230222185205.355361-4-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The masking done using env->misa_ext_mask already filters any extension
that QEMU doesn't support. If the hart supports the extension then QEMU
supports it as well.
If the masking done by env->misa_ext_mask is somehow letting unsupported
QEMU extensions pass by, misa_ext_mask itself needs to be fixed instead.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20230222185205.355361-3-dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since tcg_temp_new is now identical, use that.
In some cases we can avoid a copy from A0 or T0.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used at all, just some unused
macro re-definitions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we now get TEMP_TB temporaries by default, we no longer
need to make copies across these loops. These were the only
uses of new_tmp_a64_local(), so remove that as well.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
