Use a local SysBusDevice handle. Also use the newly introduced
sysbus_mmio_map_name which brings better readability about the region
being mapped. GED device has regions which exist depending on some
external properties and it becomes difficult to guess the index of
a region. Better refer to a region by its name.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-32-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Code based on i386/pc enablement.
The memory layout places space for 16 host bridge register regions after
the GIC_REDIST2 in the extended memmap. This is a hole in the current
map so adding them here has no impact on placement of other memory regions
(tested with enough CPUs for GIC_REDIST2 to be in use.)
The high memory map is GiB aligned so the hole is there whatever the
size of memory or device_memory below this point.
The CFMWs are placed above the extended memmap. Note the existing
variable highest_gpa is the highest GPA that has been allocated at
a particular point in setting up the memory map. Whilst this caused
some confusion in review there are existing comments explaining this
so nothing is added.
The cxl_devices_state.host_mr provides a small space in which to place
the individual host bridge register regions for whatever host bridges are
allocated via -device pxb-cxl on the command line. The existing dynamic
sysbus infrastructure is not reused because pxb-cxl is a PCI device not
a sysbus one but these registers are directly in the main memory map,
not the PCI address space.
Only create the CEDT table if cxl=on set for the machine. Default to off.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Message-id: 20250703104110.992379-4-Jonathan.Cameron@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently only the TCG and qtest accelerators can handle an EL2
guest. Instead of making the condition check be "fail if KVM or HVF"
(an exclude-list), make it a be "allow if TCG or qtest" (an
accept-list).
This is better for if/when we add new accelerators, as it makes the
default be that we forbid an EL2 guest. This is the most likely to
be correct and also "fails safe"; if the new accelerator really can
support EL2 guests then the implementor will see that they need to
add it to the accept-list.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250623121845.7214-20-philmd@linaro.org
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently only the TCG and qtest accelerators can handle an EL3
guest. Instead of making the condition check be "fail if KVM or HVF"
(an exclude-list), make it a be "allow if TCG or qtest" (an
accept-list).
This is better for if/when we add new accelerators, as it makes the
default be that we forbid an EL3 guest. This is the most likely to
be correct and also "fails safe"; if the new accelerator really can
support EL3 guests then the implementor will see that they need to
add it to the accept-list.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250623121845.7214-19-philmd@linaro.org
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_highmem_ecam field was only
used by virt-2.12 machine, which got removed. Remove it
and simplify virt_instance_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::smbios_old_sys_ver field was
only used by virt-2.11 machine, which got removed.
Remove it and simplify virt_build_smbios().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::claim_edge_triggered_timers field
was only used by virt-2.8 machine, which got removed.
Remove it and simplify fdt_add_timer_nodes() and build_gtdt().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_its field was only used by
virt-2.7 machine, which got removed. Remove it and
simplify virt_instance_init() and virt_acpi_build().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::disallow_affinity_adjustment
field was only used by virt-2.6 machine, which got
removed. Remove it and simplify virt_cpu_mp_affinity().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[PMM: Remove now-unused variable]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_pmu field was only used by
virt-2.6 machine, which got removed. Remove it and
simplify machvirt_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MMIO region size required to support virtualized environments with
large PCI BAR regions can exceed the hardcoded limit configured in QEMU.
For example, a VM with multiple NVIDIA Grace-Hopper GPUs passed through
requires more MMIO memory than the amount provided by VIRT_HIGH_PCIE_MMIO
(currently 512GB). Instead of updating VIRT_HIGH_PCIE_MMIO, introduce a
new parameter, highmem-mmio-size, that specifies the MMIO size required
to support the VM configuration.
Example usage with 1TB MMIO region size:
-machine virt,gic-version=3,highmem-mmio-size=1T
Signed-off-by: Matthew R. Ochs <mochs@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Message-id: 20250221145419.1281890-1-mochs@nvidia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
We want to remove fw_cfg_add_extra_pci_roots() which introduced
PCI bus knowledge within the generic hw/nvram/fw_cfg.c file.
Replace the calls by the pci_bus_add_fw_cfg_extra_pci_roots()
which is a 1:1 equivalent, but using correct API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-6-philmd@linaro.org>
Extend the 'mte' property for the virt machine to cover KVM as
well. For KVM, we don't allocate tag memory, but instead enable
the capability.
If MTE has been enabled, we need to disable migration, as we do not
yet have a way to migrate the tags as well. Therefore, MTE will stay
off with KVM unless requested explicitly.
[gankulkarni: This patch is rework of commit b320e21c48
which broke TCG since it made the TCG -cpu max
report the presence of MTE to the guest even if the board hadn't
enabled MTE by wiring up the tag RAM. This meant that if the guest
then tried to use MTE QEMU would segfault accessing the
non-existent tag RAM.]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Message-id: 20241008114302.4855-1-gankulkarni@os.amperecomputing.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch's main focus is to use the previously added
hvf_get_physical_address_range to inform VM creation
about the IPA size we need for the VM, so we can extend
the default 36b IPA size and support VMs with 64+GB of
RAM. This is done by freezing the memory map, computing
the highest GPA and then (depending on if the platform
supports an IPA size that large) telling the kernel to
use a size >= for the VM. In pursuit of this a couple of
things related to how we handle the physical address range
we expose to guests were altered, but for an explanation of
what we were doing:
Today, to get the IPA size we were reading id_aa64mmfr0_el1's
PARange field from a newly made vcpu. Unfortunately, HVF just
returns the hosts PARange directly for the initial value and
not the IPA size that will actually back the VM, so we believe
we have much more address space than we actually do today it seems.
Starting in macOS 13.0 some APIs were introduced to be able to
query the maximum IPA size the kernel supports, and to set the IPA
size for a given VM. However, this still has a couple of issues
on < macOS 15. Up until macOS 15 (and if the hardware supported
it) the max IPA size was 39 bits which is not a valid PARange
value, so we can't clamp down what we advertise in the vcpu's
id_aa64mmfr0_el1 to our IPA size. Starting in macOS 15 however,
the maximum IPA size is 40 bits (if it's supported in the hardware
as well) which is also a valid PARange value so we can set our IPA
size to the maximum as well as clamp down the PARange we advertise
to the guest. This allows VMs with 64+ GB of RAM and should fix the
oddness of the PARange situation as well.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-4-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This addition will be necessary for some HVF related work to follow.
For HVF on ARM there exists a set of APIs in macOS 13 to be able to
adjust the IPA size for a given VM. This is useful as by default HVF
uses 36 bits as the IPA size, so to support guests with > 64GB of RAM
we'll need to reach for this.
To have all the info necessary to carry this out however, we need some
plumbing to be able to grab the memory map and compute the highest GPA
prior to creating the VM. This is almost exactly like what kvm_type is
used for on ARM today, and is also what this will be used for. We will
compute the highest GPA and find what IPA size we'd need to satisfy this,
and if it's valid (macOS today caps at 40b) we'll set this to be the IPA
size in coming patches. This new method is only needed (today at least)
on ARM, and obviously only for HVF/macOS, so admittedly it is much less
generic than kvm_type today, but it seemed a somewhat sane way to get
the information we need from the memmap at VM creation time.
Signed-off-by: Danny Canter <danny_canter@apple.com>
Message-id: 20240828111552.93482-2-danny_canter@apple.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: removed explicit setting of field to NULL on x86]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the virt board. This is no change in
behaviour for guests, because if they simply ignore stage 2 and never
configure it then it has no effect. For the usual backwards
compatibility reasons we enable this only for machine types starting
with 9.2.
(Note that the SMMU is disabled by default on the virt board and is
only created if the user passes the 'iommu=smmuv3' machine option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-4-peter.maydell@linaro.org
