Remove the single target-specific definition used in
"exec/translator.h" (TARGET_PAGE_MASK) by un-inlining
is_same_page().
Rename the method as translator_is_same_page() and
improve its documentation.
Use it in translator_use_goto_tb().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241218154145.71353-1-philmd@linaro.org>
Commit 944f3d5dd2 ("coroutine: Add qemu_co_mutex_assert_locked")
added an inline method which uses qatomic_read(), itself declared
in "qemu/atomic.h". Explicitly include it now to avoid issue when
refactoring unrelated headers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20241217141326.98947-3-philmd@linaro.org>
When moving tb_cflags() in commit 88d4b5138a ("tcg: Make
tb_cflags() usable from target-agnostic code") we forgot to
include "qemu/atomic.h", which declares qatomic_read().
Explicitly include it now to avoid issue when refactoring
unrelated headers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20241217141326.98947-2-philmd@linaro.org>
Include "cpu.h" earlier to get the MMU_USER_IDX definition soon
enough and avoid when refactoring unrelated headers:
In file included from include/exec/translator.h:271,
from ../../accel/tcg/translator.c:13:
include/exec/cpu-all.h: In function ‘cpu_mmu_index’:
include/exec/cpu-all.h:274:12: error: ‘MMU_USER_IDX’ undeclared (first use in this function)
274 | return MMU_USER_IDX;
| ^~~~~~~~~~~~
include/exec/cpu-all.h:274:12: note: each undeclared identifier is reported only once for each function it appears in
ninja: build stopped: subcommand failed.
We need to forward-declare cpu_mmu_index() to avoid on user emulation:
In file included from include/exec/cpu-all.h:263,
from include/exec/translator.h:271,
from ../../accel/tcg/translator.c:13:
../../target/sparc/cpu.h: In function ‘cpu_get_tb_cpu_state’:
../../target/sparc/cpu.h:757:13: error: implicit declaration of function ‘cpu_mmu_index’ [-Werror=implicit-function-declaration]
757 | flags = cpu_mmu_index(env_cpu(env), false);
| ^~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241218155202.71931-5-philmd@linaro.org>
"linux-user/cpu_loop-common.h" is generic enough to be used by
bsd-user, so rename it as "user/cpu_loop.h".
Mechanical change running:
$ sed -i -e 's,cpu_loop-common.h,user/cpu_loop.h,' \
$(git grep -l cpu_loop-common.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-17-philmd@linaro.org>
The next commit will remove "qemu/clang-tsa.h" of "exec/exec-all.h",
however the following files indirectly include it:
$ git grep -L qemu/clang-tsa.h $(git grep -wl TSA_NO_TSA)
block/create.c
include/block/block_int-common.h
tests/unit/test-bdrv-drain.c
tests/unit/test-block-iothread.c
util/qemu-thread-posix.c
Explicitly include it so we can process with the removal in the
next commit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-4-philmd@linaro.org>
'hwaddr' is defined in "exec/hwaddr.h", 'ram_addr_t' in
"exec/cpu-common.h". Include these headers in order to
avoid when refactoring unrelated headers:
In file included from ../../hw/s390x/s390-virtio-ccw.c:17:
include/sysemu/physmem-target.h:37:24: error: unknown type name 'hwaddr'
37 | (MemoryRegion *mr, hwaddr offset, hwaddr length, unsigned client);
| ^
In file included from ../../hw/s390x/s390-virtio-ccw.c:16:
include/exec/ram_addr.h:52:36: error: unknown type name 'ram_addr_t'
52 | RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241218155202.71931-4-philmd@linaro.org>
'vaddr' type is declared in "exec/vaddr.h".
"exec/translation-block.h" uses this type without including
the corresponding header. It works because this header is
indirectly included, but won't work when the other headers
are refactored:
include/exec/translation-block.h:56:5: error: unknown type name 'vaddr'
56 | vaddr pc;
| ^
Explitly include "exec/vaddr.h" to avoid such problem in a
few commits.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-4-philmd@linaro.org>
TARGET_PAGE_BITS is defined in each target "cpu-param.h",
itself included by "exec/cpu-defs.h".
Include the latter in order to avoid when refactoring:
In file included from ../../system/watchpoint.c:23:
include/exec/cpu-all.h:356:19: error: use of undeclared identifier 'TARGET_PAGE_BITS'
356 | QEMU_BUILD_BUG_ON(TLB_FLAGS_MASK & TLB_SLOW_FLAGS_MASK);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-2-philmd@linaro.org>
"exec/confidential-guest-support.h" is specific to system
emulation, so move it under the system/ namespace.
Mechanical change doing:
$ sed -i \
-e 's,exec/confidential-guest-support.h,sysemu/confidential-guest-support.h,' \
$(git grep -l exec/confidential-guest-support.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241218155913.72288-2-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Currently -d guest_errors enables logging of different invalid actions
by the guest such as misusing hardware, accessing missing features or
invalid memory areas. The memory access logging can be quite verbose
which obscures the other messages enabled by this debug switch so
separate it by adding a new -d invalid_mem option to make it possible
to control it independently of other guest error logs.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <1bb0d0e91ba14aca13056df3b0a774f89cbf966c.1730549443.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The last step to enable KVM AIA aplic-imsic with irqchip in split mode
is to deal with how MSIs are going to be sent. In our current design we
don't allow an APLIC controller to send MSIs unless it's on m-mode. And
we also do not allow Supervisor MSI address configuration via the
'smsiaddrcfg' and 'smsiaddrcfgh' registers unless it's also a m-mode
APLIC controller.
Add a new RISCVACPLICState attribute called 'kvm_msicfgaddr'. This
attribute represents the base configuration address for MSIs, in our
case the base addr of the IMSIC controller. This attribute is being set
only when running irqchip_split() mode with aia=aplic-imsic.
During riscv_aplic_msi_send() we'll check if the attribute was set to
skip the check for a m-mode APLIC controller and to change the resulting
MSI addr by adding kvm_msicfgaddr right before address_space_stl_le().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current logic to determine if we don't need an emulated APLIC
controller, i.e. KVM will provide for us, is to determine if we're
running KVM, with in-kernel irqchip support, and running
aia=aplic-imsic. This is modelled by riscv_is_kvm_aia_aplic_imsic() and
virt_use_kvm_aia_aplic_imsic().
This won't suffice to support irqchip_split() mode: it will match
exactly the same conditions as the one above, but setting the irqchip to
'split' mode will now require us to emulate an APLIC s-mode controller,
like we're doing with 'aia=aplic'.
Create a new riscv_use_emulated_aplic() helper that will encapsulate
this logic. Replace the uses of "riscv_is_kvm_aia_aplic_imsic()" with
this helper every time we're taking a decision on emulate an APLIC
controller or not. Do the same in virt.c with virt_use_emulated_aplic().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The helper is_kvm_aia() is checking not only for AIA, but for
aplic-imsic (i.e. "aia=aplic-imsic" in 'virt' RISC-V machine) with an
in-kernel chip present.
Rename it to be a bit clear what the helper is doing since we'll add
more AIA helpers in the next patches.
Make the helper public because the 'virt' machine will use it as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a new machine option called 'iommu-sys' that enables a
riscv-iommu-sys platform device for the 'virt' machine. The option is
default 'off'.
The device will use IRQs 36 to 39.
We will not support both riscv-iommu-sys and riscv-iommu-pci devices in
the same board in this first implementation. If a riscv-iommu-pci device
is added in the command line we will disable the riscv-iommu-sys device.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This device models the RISC-V IOMMU as a sysbus device. The same design
decisions taken in the riscv-iommu-pci device were kept, namely the
existence of 4 vectors are available for each interrupt cause.
The WSIs are emitted using the input of the s->notify() callback as a
index to an IRQ list. The IRQ list starts at 'base_irq' and goes until
base_irq + 3. This means that boards must have 4 contiguous IRQ lines
available, starting from 'base_irq'.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 5286c36622 ("target/i386: properly reset TSC on reset")
QEMU writes the special value of "1" to each online vCPU TSC on VM reset
to reset it.
However parked vCPUs don't get that handling and due to that their TSCs
get desynchronized when the VM gets reset.
This in turn causes KVM to turn off PVCLOCK_TSC_STABLE_BIT in its exported
PV clock.
Note that KVM has no understanding of vCPU being currently parked.
Without PVCLOCK_TSC_STABLE_BIT the sched clock is marked unstable in
the guest's kvm_sched_clock_init().
This causes a performance regressions to show in some tests.
Fix this issue by writing the special value of "1" also to TSCs of parked
vCPUs on VM reset.
Reproducing the issue:
1) Boot a VM with "-smp 2,maxcpus=3" or similar
2) device_add host-x86_64-cpu,id=vcpu,node-id=0,socket-id=0,core-id=2,thread-id=0
3) Wait a few seconds
4) device_del vcpu
5) Inside the VM run:
# echo "t" >/proc/sysrq-trigger; dmesg | grep sched_clock_stable
Observe the sched_clock_stable() value is 1.
6) Reboot the VM
7) Once the VM boots once again run inside it:
# echo "t" >/proc/sysrq-trigger; dmesg | grep sched_clock_stable
Observe the sched_clock_stable() value is now 0.
Fixes: 5286c36622 ("target/i386: properly reset TSC on reset")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/5a605a88e9a231386dc803c60f5fed9b48108139.1734014926.git.maciej.szmigiero@oracle.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, the stub BQL in stubs/iothread-lock.c always reports itself as
unlocked. However, Rust would like to run its tests in an environment where
the BQL *is* locked. Provide an extremely dirty function that flips the
return value of bql_is_locked() to true.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
