On Emscripten, function pointer casts can result in runtime failures due to
strict function signature checks. This affects the use of g_list_sort and
g_slist_sort, which internally perform function pointer casts that are not
supported by Emscripten. To avoid these issues, g_list_sort_with_data and
g_slist_sort_with_data should be used instead, as they do not rely on
function pointer casting.
Signed-off-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Link: https://lore.kernel.org/r/d917055d35f5ff7316ccdcbdf57af9a7bd85bf29.1745820062.git.ktokunaga.mail@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Relatively few objects in qemu care about watchpoints, so split
out to a new header. Removes an instance of CONFIG_USER_ONLY
from hw/core/cpu.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 60d30cff84 ("target/ppc: Move SPR indirect registers into
PnvCore") was mismerged and moved the SPRs to power8-only, instead
of power9/10-only.
Fixes: 60d30cff84 ("target/ppc: Move SPR indirect registers into PnvCore")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
From the Freescale PowerPC Architecture Primer:
Alternate time base APU. This APU, implemented on the e500v2, defines
a 64-bit time base counter that differs from the PowerPC defined time
base in that it is not writable and counts at a different, and
typically much higher, frequency. The alternate time base always
counts up, wrapping when the 64-bit count overflows.
This implementation of ATB uses the same frequency as the TB. The
existing spr_read_atbu/l functions are unused without this patch
to wire them into the SPR.
RTEMS uses this SPR on the e6500, though this hasn't been tested.
Message-ID: <20241219034035.1826173-6-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Linux power management code accesses these registers for pstate
management. Wire up a very simple implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
After OCC fixes in QEMU pnv model and skiboot (since they have suffered
some bitrot), Linux will start performing PM SPR accesses. This is a
very simple implementation that makes it a bit happier.
Thanks,
Nick
TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.
Mechanical change doing:
$ sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
$(git grep -l hw/core/tcg-cpu-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>
Currently we handle flushing of output denormals in uncanon_normal
always before we deal with rounding. This works for architectures
that detect tininess before rounding, but is usually not the right
place when the architecture detects tininess after rounding. For
example, for x86 the SDM states that the MXCSR FTZ control bit causes
outputs to be flushed to zero "when it detects a floating-point
underflow condition". This means that we mustn't flush to zero if
the input is such that after rounding it is no longer tiny.
At least one of our guest architectures does underflow detection
after rounding but flushing of denormals before rounding (MIPS MSA);
this means we need to have a config knob for this that is separate
from our existing tininess_before_rounding setting.
Add an ftz_detection flag. For consistency with
tininess_before_rounding, we make it default to "detect ftz after
rounding"; this means that we need to explicitly set the flag to
"detect ftz before rounding" on every existing architecture that sets
flush_to_zero, so that this commit has no behaviour change.
(This means more code change here but for the long term a less
confusing API.)
For several architectures the current behaviour is either
definitely or possibly wrong; annotate those with TODO comments.
These architectures are definitely wrong (and should detect
ftz after rounding):
* x86
* Alpha
For these architectures the spec is unclear:
* MIPS (for non-MSA)
* RX
* SH4
PA-RISC makes ftz detection IMPDEF, but we aren't setting the
"tininess before rounding" setting that we ought to.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
Convert all targets simultaneously, as the gen_intermediate_code
function disappears from the target. While there are possible
workarounds, they're larger than simply performing the conversion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accel & Exec patch queue
- Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander)
- Add '-d invalid_mem' logging option (Zoltan)
- Create QOM containers explicitly (Peter)
- Rename sysemu/ -> system/ (Philippe)
- Re-orderning of include/exec/ headers (Philippe)
Move a lot of declarations from these legacy mixed bag headers:
. "exec/cpu-all.h"
. "exec/cpu-common.h"
. "exec/cpu-defs.h"
. "exec/exec-all.h"
. "exec/translate-all"
to these more specific ones:
. "exec/page-protection.h"
. "exec/translation-block.h"
. "user/cpu_loop.h"
. "user/guest-host.h"
. "user/page-protection.h"
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t
# wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt
# KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K
# A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8
# 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe///
# 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r
# xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl
# VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay
# ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP
# 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd
# +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6
# x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo=
# =cjz8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Dec 2024 11:45:20 EST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits)
util/qemu-timer: fix indentation
meson: Do not define CONFIG_DEVICES on user emulation
system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header
system/numa: Remove unnecessary 'exec/cpu-common.h' header
hw/xen: Remove unnecessary 'exec/cpu-common.h' header
target/mips: Drop left-over comment about Jazz machine
target/mips: Remove tswap() calls in semihosting uhi_fstat_cb()
target/xtensa: Remove tswap() calls in semihosting simcall() helper
accel/tcg: Un-inline translator_is_same_page()
accel/tcg: Include missing 'exec/translation-block.h' header
accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h'
accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h'
qemu/coroutine: Include missing 'qemu/atomic.h' header
exec/translation-block: Include missing 'qemu/atomic.h' header
accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h'
exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined
target/sparc: Move sparc_restore_state_to_opc() to cpu.c
target/sparc: Uninline cpu_get_tb_cpu_state()
target/loongarch: Declare loongarch_cpu_dump_state() locally
user: Move various declarations out of 'exec/exec-all.h'
...
Conflicts:
hw/char/riscv_htif.c
hw/intc/riscv_aplic.c
target/s390x/cpu.c
Apply sysemu header path changes to not in the pull request.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Historically, the registration of sprs have been inherited alongwith
every new Power arch support being added leading to a lot of code
duplication. It's time to do necessary cleanups now to avoid further
duplication with newer arch support being added.
Signed-off-by: Harsh Prateek Bora <harshb@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add CPU target code to add support for new Power11 Processor.
Power11 core is same as Power10, hence reuse functions defined for
Power10.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce 'PnvChipClass::spapr_logical_pvr' to know corresponding logical
PVR of a PowerPC CPU.
This helps to have a one-to-one mapping between PVR and logical PVR for
a CPU, and used in a later commit to handle cases where PCR of two
generations of Power chip is same, which causes regressions with
compat-mode.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Power9/10 initialization code consists of a lot of logical OR of
various flag bits as supported by respective Power platform during its
initialization, most of which is duplicated and only selected bits are
added or removed as needed with each new platform support being added.
Remove the duplicate code and share using common macros.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
[adityag: renamed many POWERPC_* flags to PPC_* flags, checkpatch fixes]
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 0cac0f1b96 marked pseries-2.12 machines as deprecated
with reasons mentioned in its commit log.
Removing pseries-2.12 specific code with this patch.
While at it, also remove pre-3.0-migration hacks introduced for backward
compatibility which are now turned useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.9 specific code with this patch for now.
While at it, also remove the pre-2.10 migration hacks which now become
obsolete.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1392617d35 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.7 specific code with this patch for now.
While at it, also remove pre-2.8-migration and pci/mmio hacks introduced
for backward compatibility.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Recent POWER CPUs can operate in "LPAR per core" or "LPAR per thread"
modes. In per-core mode, some SPRs and IPI doorbells are shared between
threads in a core. In per-thread mode, supervisor and user state is
not shared between threads.
OpenPOWER systems after POWER8 use LPAR per thread mode, and it is
required for KVM. Enterprise systems use LPAR per core mode, as they
partition the machine by core.
Implement a lpar-per-core machine option for powernv machines. This
is fixed true for POWER8 machines, and defaults off for P9 and P10.
With this change, powernv8 SMT now works sufficiently to run Linux,
with a single socket. Multi-threaded KVM guests still have problems,
as does multi-socket Linux boot.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add helpers for TCG code to determine if there are SMT siblings
sharing per-core and per-lpar registers. This simplifies the
callers and makes SMT register topology simpler to modify with
later changes.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SPRC/SPRD were recently added to all BookS CPUs supported, but
they are only tested on POWER9 and POWER10, so restrict them to
those CPUs.
SPR indirect scratch registers presently replicated per-CPU like
SMT SPRs, but the PnvCore is a better place for them since they
are restricted to P9/P10.
Also add SPR indirect read access to core thread state for POWER9
since skiboot accesses that when booting to check for big-core
mode.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The patch enables HASHPKEYR migration by hooking with the
"KVM one reg" ID KVM_REG_PPC_HASHPKEYR.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The patch enables HASHKEYR migration by hooking with the
"KVM one reg" ID KVM_REG_PPC_HASHKEYR.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The patch enables DEXCR migration by hooking with the
"KVM one reg" ID KVM_REG_PPC_DEXCR.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently the TCGCPUOps::cpu_exec_halt method is optional, and if it
is not set then the default is to call the CPUClass::has_work
method (which has an identical function signature).
We would like to make the cpu_exec_halt method mandatory so we can
remove the runtime check and fallback handling. In preparation for
that, make all the targets which don't need special handling in their
cpu_exec_halt set it to their cpu_has_work implementation instead of
leaving it unset. (This is every target except for arm and i386.)
In the riscv case this requires us to make the function not
be local to the source file it's defined in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Checking if a page protection bit is set for a given access type is a
common operation. Add a function to avoid repeating the same check at
multiple places. As this relies on access type and page protection bit
values having certain relation also add an assert to ensure that this
assumption holds.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Several 4xx CPUs and e200 share the same TLB settings enclosed in an
ifdef. Split it off in a common function to reduce code duplication
and the number of ifdefs.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
