- cleanup/refactoring in the cpu feature code
- fix for a tcg test case
- halt/clear support for vfio-ccw, and use a new helper
# gpg: Signature made Mon 01 Jul 2019 12:08:41 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20190701:
s390x: add cpu feature/model files to KVM section
vfio-ccw: support async command subregion
vfio-ccw: use vfio_set_irq_signaling
s390x/cpumodel: Prepend KDSA features with "KDSA"
s390x/cpumodel: Rework CPU feature definition
tests/tcg/s390x: Fix alignment of csst parameter list
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MIPS queue for June 2016th, 2019
# gpg: Signature made Wed 26 Jun 2019 12:38:58 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jun-26-2019:
target/mips: Fix big endian host behavior for interleave MSA instructions
tests/tcg: target/mips: Fix some test cases for pack MSA instructions
tests/tcg: target/mips: Add support for MSA MIPS32R6 testings
tests/tcg: target/mips: Add support for MSA big-endian target testings
tests/tcg: target/mips: Amend tests for MSA int multiply instructions
tests/tcg: target/mips: Amend tests for MSA int dot product instructions
tests/tcg: target/mips: Add tests for MSA move instructions
tests/tcg: target/mips: Add tests for MSA bit move instructions
dma/rc4030: Minor code style cleanup
dma/rc4030: Fix off-by-one error in specified memory region size
hw/mips/gt64xxx_pci: Align the pci0-mem size
hw/mips/gt64xxx_pci: Convert debug printf()s to trace events
hw/mips/gt64xxx_pci: Use qemu_log_mask() instead of debug printf()
hw/mips/gt64xxx_pci: Fix 'spaces' coding style issues
hw/mips/gt64xxx_pci: Fix 'braces' coding style issues
hw/mips/gt64xxx_pci: Fix 'tabs' coding style issues
hw/mips/gt64xxx_pci: Fix multiline comment syntax
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One fix for a tcg test case and two cleanups/refactorings of cpu feature
definitions.
# gpg: Signature made Fri 21 Jun 2019 03:37:37 PM CEST
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [full]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
* tag 's390x-tcg-2019-06-21':
s390x/cpumodel: Prepend KDSA features with "KDSA"
s390x/cpumodel: Rework CPU feature definition
tests/tcg/s390x: Fix alignment of csst parameter list
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts
Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).
Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <mreitz@redhat.com>
Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190620200840.17655-1-ptoscano@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 5873173.t2JhDm7DL7@lindworm.usersys.redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The parameter list given in general register 1 shall be aligned
on a quadword boundary. This test currently succeeds or fails
depending on the compiler version used and the accidential layout
of the function's stack frame.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
For better appearance and usefullnes, include ISA/ASE name and
instruction group name in the output of tests. For example, all
this data will be displayed for FMAX_A.W test:
| MSA | Float Max Min | FMAX_A.W |
| PASS: 80 | FAIL: 0 | elapsed time: 0.16 ms |
(the data will be displayed in one row; they are presented here in two
rows not to exceed the width of the commit message)
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1561031359-6727-2-git-send-email-aleksandar.markovic@rt-rk.com>
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
3.1 Some jobs creates filters to be their main node, so, this check
don't actually prevent creating second job on same real node (which
will create another filter node) (but I hope it is restricted by
other mechanisms)
3.2 Even without bs->job we have two systems of permissions:
op-blockers and BLK_PERM
3.3 We may want to run several jobs on one node one day
And finally, drop bs->job pointer itself. Hurrah!
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, the "thistime" variable is not reinitialized on every loop
iteration. This leads to tests that do not yield a run time (because
they failed or were skipped) printing the run time of the previous test
that did. Fix that by reinitializing "thistime" for every test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most callers know which monitor type they want to have. Instead of
calling monitor_init() with flags that can describe both types of
monitors, make monitor_init_{hmp,qmp}() public interfaces that take
specific bools instead of flags and call these functions directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-15-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As expected files have been updated, make sure we
do not forget to remove them from the allowed
diff list.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
update expected files and drop them from allowed diff list.
Fixes: 4a4418369d ("q35: fix mmconfig and PCI0._CRS")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch changes the handling of the mmconfig area. Thanks to the
pci(e) expander devices we already have the logic to exclude address
ranges from PCI0._CRS. We can simply add the mmconfig address range
to the list get it excluded as well.
With that in place we can go with a fixed pci hole which covers the
whole area from the end of (low) ram to the ioapic.
This will make the whole logic alot less fragile. No matter where the
firmware places the mmconfig xbar, things should work correctly. The
guest also gets a bit more PCI address space (seabios boot):
# cat /proc/iomem
[ ... ]
7ffdd000-7fffffff : reserved
80000000-afffffff : PCI Bus 0000:00 <<-- this is new
b0000000-bfffffff : PCI MMCONFIG 0000 [bus 00-ff]
b0000000-bfffffff : reserved
c0000000-febfffff : PCI Bus 0000:00
f8000000-fbffffff : 0000:00:01.0
[ ... ]
So this is a guest visible change.
Cc: László Érsek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190607073429.3436-1-kraxel@redhat.com>
This test converts a simple image to another, but blkdebug injects
block_status and read faults at some offsets. The resulting image
should be the same as the input image, except that sectors that could
not be read have to be 0.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190507203508.18026-7-mreitz@redhat.com
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[mreitz: Dropped superfluous printf from _filter_offsets, as suggested
by Vladimir; disable test for VDI and IMGOPTSSYNTAX]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test fails at least for qcow, because of different cluster sizes in
base and top (and therefore different granularities of bitmaps we are
trying to merge).
The test aim is to check block-dirty-bitmap-merge between different
nodes functionality, no needs to check all formats. So, let's just drop
support for anything except qcow2.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190605155405.104384-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In 219, we wait for the job to make progress before we emit its status.
This makes the output reliable. We do not wait for any more progress if
the job's current-progress already matches its total-progress.
Unfortunately, there is a bug: Right after the job has been started,
it's possible that total-progress is still 0. In that case, we may skip
the first progress-making step and keep ending up 64 kB short.
To fix that bug, we can simply wait for total-progress to reach 4 MB
(the image size) after starting the job.
Reported-by: Karen Mezick <kmezick@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1686651
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190516161114.27596-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
[mreitz: Adjusted commit message as per John's proposal]
Signed-off-by: Max Reitz <mreitz@redhat.com>
It is possible for an empty file to take up blocks on a filesystem, for
example:
$ qemu-img create -f raw test.img 1G
Formatting 'test.img', fmt=raw size=1073741824
$ mkfs.ext4 -I 128 -q test.img
$ mkdir test-mount
$ sudo mount -o loop test.img test-mount
$ sudo touch test-mount/test-file
$ stat -c 'blocks=%b' test-mount/test-file
blocks=8
These extra blocks (one cluster) are apparently used for metadata,
because they are always there, on top of blocks used for data:
$ sudo dd if=/dev/zero of=test-mount/test-file bs=1M count=1
1+0 records in
1+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.00135339 s, 775 MB/s
$ stat -c 'blocks=%b' test-mount/test-file
blocks=2056
Make iotest 175 take this into account.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190516144319.12570-1-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Don't pull events out of the queue that don't belong to us;
be choosier so that we can use this method to drive jobs that
were launched by transactions that may have more jobs.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190523170643.20794-5-jsnow@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The ARM pseudocode installs the error_code into the original
pointer, not the encrypted pointer. The difference applies
within the 7 bits of pac data; the result should be the sign
extension of bit 55.
Add a testcase to that effect.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
common.nbd's nbd_server_set_tcp_port() tries to find a free port, and
then uses it for the whole test run. However, this is racy because even
if the port was free at the beginning, there is no guarantee it will
continue to be available. Therefore, 233 currently cannot reliably be
run concurrently with other NBD TCP tests.
This patch addresses the problem by dropping nbd_server_set_tcp_port(),
and instead finding a new port every time nbd_server_start_tcp_socket()
is invoked. For this, we run qemu-nbd with --fork and on error evaluate
the output to see whether it contains "Address already in use". If so,
we try the next port.
On success, we still want to continually redirect the output from
qemu-nbd to stderr. To achieve both, we redirect qemu-nbd's stderr to a
FIFO that we then open in bash. If the parent process exits with status
0 (which means that the server has started successfully), we launch a
background cat process that copies the FIFO to stderr. On failure, we
read the whole content into a variable and then evaluate it.
While at it, use --fork in nbd_server_start_unix_socket(), too. Doing
so allows us to drop nbd_server_wait_for_*_socket().
Note that the reason common.nbd did not use --fork before is that
qemu-nbd did not have --pid-file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508211820.17851-6-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu_nbd_pipe() currently unconditionally reads qemu-nbd's output. That
is not ideal because qemu-nbd may keep stderr open after the parent
process has exited.
Currently, the only user of qemu_nbd_pipe() is 147, which discards the
whole output if the parent process returned success and only evaluates
it on error. Therefore, we can replace qemu_nbd_pipe() by
qemu_nbd_early_pipe() that does the same: Discard the output on success,
and return it on error.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508211820.17851-3-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of doing the full real to 64 bit dance we are attempting to
leverage Xen's PVH boot spec to go from 32 bit to 64 bit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since we only run build the multiarch tests and we use a fully
resolved path for the crt object we don't need the wildcard or VPATH
messing about.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
If we've truncated a wider read we can detect the condition earlier by
looking at the number of zeros we've read. So we don't trip up on
cases where we have written zeros to the start of the buffer we also
ensure we only start each offset read from the right address.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
`make vm-build-centos` run docker-based tests on CentOS. The
created containers should have network otherwise some tests
fail. Also fixed the BUILD_SCRIPT template to correctly
evaluate "V=1" for verbose output.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190329210804.22121-5-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Changed the vm-test makefile to execute python scripts
with the interpreter configured on build. This allows to
run vm-test targets properly in Linux distros with Python 3
only support.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190329210804.22121-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This has aged a little and we have a separate LTS image for testing on
the older distros. Update it to a more recent release like its Fedora
cousin.
Besides it is useful to have something with gcc-9 on it for squashing
those stringop truncation errors.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
