According to PoP, both 32- and 64-bit shifts use lowest 6 address
bits. The current code special-cases 32-bit shifts to use only 5 bits,
which is not correct. For example, shifting by 32 bits currently
preserves the initial value, however, it's supposed zero it out
instead.
Fix by merging sh32 and sh64 and adapting CC calculation to shift
values greater than 31.
Fixes: cbe24bfa91 ("target-s390: Convert SHIFT, ROTATE SINGLE")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
An overflow occurs for SLAG when at least one shifted bit is not equal
to sign bit. Therefore, we need to check that `shift + 1` bits are
neither all 0s nor all 1s. The current code checks only `shift` bits,
missing some overflows.
Fixes: cbe24bfa91 ("target-s390: Convert SHIFT, ROTATE SINGLE")
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SRDA uses r1_D32 for binding the first operand and s64 for setting CC.
cout_s64() relies on o->out being the shift result, however,
wout_r1_D32() clobbers it.
Fix by using a temporary.
Fixes: a79ba3398a ("target-s390: Convert SHIFT DOUBLE")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220112165016.226996-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* configure and meson cleanups
* KVM_GET/SET_SREGS2 support for x86
# gpg: Signature made Wed 12 Jan 2022 13:09:19 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
meson: reenable filemonitor-inotify compilation
meson: build all modules by default
configure: do not create roms/seabios/config.mak if SeaBIOS not present
tests/tcg: Fix target-specific Makefile variables path for user-mode
KVM: x86: ignore interrupt_bitmap field of KVM_GET/SET_SREGS
KVM: use KVM_{GET|SET}_SREGS2 when supported.
meson: add comments in the target-specific flags section
configure, meson: move config-poison.h to meson
meson: build contrib/ executables after generated headers
configure: move non-command-line variables away from command-line parsing section
configure: parse --enable/--disable-strip automatically, flip default
configure, makefile: remove traces of really old files
configure: do not set bsd_user/linux_user early
configure: simplify creation of plugin symbol list
block/file-posix: Simplify the XFS_IOC_DIOINFO handling
meson: cleanup common-user/ build
user: move common-user includes to a subdirectory of {bsd,linux}-user/
meson: reuse common_user_inc when building files specific to user-mode emulators
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ppc 7.0 queue:
* New SLOF for PPC970 and POWER5+ (Alexey)
* Fixes for POWER5+ pseries (Cedric)
* Updates of documentation (Leonardo and Thomas)
* First step of exception model cleanup (Fabiano)
* User created PHB3/PHB4 devices (Daniel and Cedric)
# gpg: Signature made Wed 12 Jan 2022 10:43:21 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-ppc-20220112: (34 commits)
ppc/pnv: use stack->pci_regs[] in pnv_pec_stk_pci_xscom_write()
ppc/pnv: turn pnv_phb4_update_regions() into static
ppc/pnv: Introduce user creatable pnv-phb4 devices
ppc/pnv: turn 'phb' into a pointer in struct PnvPhb4PecStack
ppc/pnv: move PHB4 XSCOM init to phb4_realize()
ppc/pnv: set phb4 properties in stk_realize()
pnv_phb4_pec: use pnv_phb4_pec_get_phb_id() in pnv_pec_dt_xscom()
pnv_phb4_pec.c: move pnv_pec_phb_offset() to pnv_phb4.c
pnv_phb4.c: change TYPE_PNV_PHB4_ROOT_BUS name
pnv_phb3.h: change TYPE_PNV_PHB3_ROOT_BUS name
ppc/pnv: Move num_phbs under Pnv8Chip
ppc/pnv: Complete user created PHB3 devices
ppc/pnv: Reparent user created PHB3 devices to the PnvChip
ppc/pnv: Introduce support for user created PHB3 devices
pnv_phb4.c: check if root port exists in rc_config functions
pnv_phb4.c: make pnv-phb4-root-port user creatable
ppc/pnv: Attach PHB3 root port device when defaults are enabled
pnv_phb4.c: add unique chassis and slot for pnv_phb4_root_port
pnv_phb3.c: add unique chassis and slot for pnv_phb3_root_port
target/ppc: Set the correct endianness for powernv memory dumps
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is unnecessary, because the interrupt would be retrieved and queued
anyway by KVM_GET_VCPU_EVENTS and KVM_SET_VCPU_EVENTS respectively,
and it makes the flow more similar to the one for KVM_GET/SET_SREGS2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We use the endianness of interrupts to determine which endianness to
use for the guest kernel memory dump. For machines that support HILE
(powernv8 and up) we have been always generating big endian dump
files.
This patch uses the HILE support recently added to
ppc_interrupts_little_endian to fix the endianness of the dumps for
powernv machines.
Here are two dumps created at different moments:
$ file skiboot.dump
skiboot.dump: ELF 64-bit MSB core file, 64-bit PowerPC ...
$ file kernel.dump
kernel.dump: ELF 64-bit LSB core file, 64-bit PowerPC ...
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some CPUs set ILE via an MSR bit. We can make
ppc_interrupts_little_endian handle that case as well. Now we have a
centralized way of determining the endianness of interrupts.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ppc_interrupts_little_endian function could be used for interrupts
delivered in Hypervisor mode, so add support for powernv8 and powernv9
to it.
Also drop the comment because it is inaccurate, all CPUs that can run
little endian can have interrupts in little endian. The point is
whether they can take interrupts in an endianness different from
MSR_LE.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v2.03 introduced Floating Round to Integer instructions : frin,
friz, frip, and frim. Add them to POWER5+.
The PPC_FLOAT_EXT flag also includes the fre (Floating Reciprocal
Estimate) instruction which was introduced in ISA v2.0x. The
architecture document says its optional and that might be the reason
why it has been kept under the PPC_FLOAT_EXT flag. This means 970 CPUs
can not use it under QEMU, which doesn't seem to be a problem.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
popcntb instruction was added in ISA v2.02. Add support for POWER5+
processors since they implement ISA v2.03.
PPC970 CPUs implement v2.01 and do not support popcntb.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220105095142.3990430-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Simplify cpu_loop by doing all of the decode in translate.
This fixes a bug in that cpu_loop was not handling the
different layout of the R6 version of break16. This fixes
a bug in that cpu_loop extracted the wrong bits for the
mips16e break16 instruction.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-17-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit a9431a03f7 ("target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature") added
a new feature for processors from the 68020 onwards which do not require data
accesses to be word aligned.
Unfortunately the original commit missed an additional case whereby the SP is
still word aligned when setting up an additional format 1 stack frame so add the
necessary M68K_FEATURE_UNALIGNED_DATA feature guard.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: a9431a03f7 ("target/m68k: add M68K_FEATURE_UNALIGNED_DATA feature")
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220108180453.18680-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The stval and mtval registers can optionally contain the faulting
instruction on an illegal instruction exception. This patch adds support
for setting the stval and mtval registers.
The RISC-V spec states that "The stval register can optionally also be
used to return the faulting instruction bits on an illegal instruction
exception...". In this case we are always writing the value on an
illegal instruction.
This doesn't match all CPUs (some CPUs won't write the data), but in
QEMU let's just populate the value on illegal instructions. This won't
break any guest software, but will provide more information to guests.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211220064916.107241-4-alistair.francis@opensource.wdc.com
Get function to retrieve the 64 top bits of a register, stored in the gprh
field of the cpu state. Set function that writes the 128-bit value at once.
The access to the gprh field can not be protected at compile time to make
sure it is accessed only in the 128-bit version of the processor because we
have no way to indicate that the misa_mxl_max field is const.
The 128-bit ISA adds ldu, lq and sq. We provide support for these
instructions. Note that (a) we compute only 64-bit addresses to actually
access memory, cowardly utilizing the existing address translation mechanism
of QEMU, and (b) we assume for now little-endian memory accesses.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-10-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vfncvt.f.xu.w, vfncvt.f.x.w convert double-width integer to single-width
floating-point. Therefore, should use require_rvf() to check whether
RVF/RVD is enabled.
vfncvt.f.f.w, vfncvt.rod.f.f.w convert double-width floating-point to
single-width integer. Therefore, should use require_scale_rvf() to check
whether RVF/RVD is enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vfwcvt.xu.f.v, vfwcvt.x.f.v, vfwcvt.rtz.xu.f.v and vfwcvt.rtz.x.f.v
convert single-width floating-point to double-width integer.
Therefore, should use require_rvf() to check whether RVF/RVD is enabled.
vfwcvt.f.xu.v, vfwcvt.f.x.v convert single-width integer to double-width
floating-point, and vfwcvt.f.f.v convert double-width floating-point to
single-width floating-point. Therefore, should use require_scale_rvf() to
check whether RVF/RVD is enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
