Add a functional test for the sx1 board that uses the kernel and
rootfs provided by Guenter Roeck in the linux-test-downloads repo:
https://github.com/groeck/linux-test-downloads/
We have three variants of the test for this board:
* just boot initrd
* boot with filesystem on SD card
* boot from flash
In all cases these images have a userspace that is configured to
immediately reboot the system on successful boot, and the board
itself supports telling QEMU to do the reboot, so we only need to
wait for QEMU to exit (via -no-reboot).
Since there are three subtests, the test as a whole takes about
80s on my local machine. That's about the same as the aarch64_virt
test, so give it the same overall test timeout as that one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241017163247.711244-3-peter.maydell@linaro.org
This is a simple conversion of the tests with some cleanups and
adjustments to match the new test framework. Replace the zephyr image
MD5 hashes with SHA256 hashes while at it.
The SDK tests depend on a ssh class from avocado.utils which is
difficult to replace. To be addressed separately.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
These tests occasionally time out when the host system is under heavy
load. Increase the timeout setting to allow for more headroom here.
Message-ID: <20241002140212.350467-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Looks like a copy-n-paste mistake while adding the or1k_sim test
here: The test downloads an asset from the internet, so it should
be in the thorough category, not in the quick one.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This test handles both, aarch64 and x86_64, with the same test code
(apart from some initial setup), so don't split this file by target
but add a check for self.arch in the main test function.
Message-ID: <20240903051333.102494-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've got to do_test_advcal_2018() here now that the test resides
in a separate file. Also switch back to the original URL (since
the site did not vanish as originally expected) and update the
hashsum to use SHA256.
Message-ID: <20240906180549.792832-15-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've got to do_test_advcal_2018() here now that the test resides
in a separate file. Also switch back to the original URL (since
the site did not vanish as originally expected) and update the
hashsum to use SHA256.
Message-ID: <20240906180549.792832-14-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Since the asset is expected locally and the test is guarded
with RESCUE_YL_PATH, keep it under the 'quick' category.
$ RESCUE_YL_PATH=/path/to/rescue-yl QEMU_TEST_ALLOW_UNTRUSTED_CODE=1 \
make check-functional-mips64el
1/4 qemu:func-quick+func-mips64el / func-mips64el-empty_cpu_model OK 0.12s 1 subtests passed
2/4 qemu:func-quick+func-mips64el / func-mips64el-version OK 0.13s 1 subtests passed
3/4 qemu:func-quick+func-mips64el / func-mips64el-info_usernet OK 0.15s 1 subtests passed
4/4 qemu:func-quick+func-mips64el / func-mips64el-mips64el_fuloong2e OK 0.19s 1 subtests passed
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240827094905.80648-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-37-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hash to
SHA256 since SHA1 should not be used anymore nowadays.
Provide get_qemu_img() helper in qemu_test.
$ make check-functional-aarch64 V=1
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_aarch64_virt_gicv2 OK
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_aarch64_virt_gicv3 OK
▶ 1/4 test_aarch64_virt.Aarch64VirtMachine.test_alpine_virt_tcg_gic_max OK
1/4 qemu:func-thorough+func-aarch64-thorough+thorough / func-aarch64-aarch64_virt OK 30.44s 3 subtests passed
...
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240826103634.52384-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-36-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Since SBSA_FLASH files are not
tarballs, use lzma_uncompress() method.
Avocado used to set a timeout of 11 tests * 180s = 1980s.
Hopefully 600s should be sufficient.
Running on macOS Sonoma / Apple silicon M1:
$ QEMU_TEST_TIMEOUT_EXPECTED=1 make check-functional-aarch64 V=1
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_impdef OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_off OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_alpine_linux_neoverse_n1 OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_edk2_firmware OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_cortex_a57 OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max_pauth_impdef OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_max_pauth_off OK
▶ 1/5 test_aarch64_sbsaref.Aarch64SbsarefMachine.test_sbsaref_openbsd73_neoverse_n1 OK
1/5 qemu:func-thorough+func-aarch64-thorough+thorough / func-aarch64-aarch64_sbsaref OK 241.79s 11 subtests passed
...
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240823131614.10269-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-ID: <20240830133841.142644-35-thuth@redhat.com>
[thuth: remove remaining Avocado tags]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Straight forward conversion. Update the SHA1 hashes to SHA256
hashes since SHA1 should not be used anymore nowadays.
$ QEMU_TEST_ALLOW_UNTRUSTED_CODE=1 make check-functional-arm
...
6/6 qemu:func-thorough+func-arm-thorough+thorough / func-arm-arm_integratorcp OK 3.90s 2 subtests passed
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822110238.82312-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-34-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code that handles running of tesseract needs to be tweaked a little
bit to be able to run without the functions from avocado.utils, and
while we're at it, drop some legacy stuff that was still there due to
Tesseract 3 support that we already dropped a while ago.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-29-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A straight forward conversion, we just also have to remove the decorator
@skipUnless(os.getenv('SPEED')) since all non-trivial functional tests
are running in SPEED=thorough mode now. Also make sure that the extracted
assets are writable, so that the test does not fail if it gets re-run
and there are stale read-only files already around.
Message-ID: <20240830133841.142644-28-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the Python standard zipfile module instead of avocado.utils for
extracting the ZIP file that we download here, and use the standard
subprocess module for running the "tail" command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-27-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The machine_microblaze.py file contained two tests, one for each
endianness. Since we only support one QEMU target binary per file
in the new functional test environment, we have to split this file
up into two files now.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-23-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
