OpenBK7231T_App/docs/flags.md

Flags

Here is the latest, up to date Flags list. This file was autogenerated by running 'node scripts/getcommands.js' in the repository. All descriptions were taken from code. Do not add anything here, as it will overwritten with next rebuild.

ID	Description
0	[MQTT] Broadcast led params together (send dimmer and color when dimmer or color changes, topic name: YourDevName/led_basecolor_rgb/get, YourDevName/led_dimmer/get)
1	[MQTT] Broadcast led final color (topic name: YourDevName/led_finalcolor_rgb/get)
2	[MQTT] Broadcast self state every N (def: 60) seconds (delay configurable by 'mqtt_broadcastInterval' and 'mqtt_broadcastItemsPerSec' commands)
3	[LED][Debug] Show raw PWM controller on WWW index instead of new LED RGB/CW/etc picker
4	[LED] Force show RGBCW controller (for example, for SM2135 LEDs, or for DGR sender)
5	[CMD] Enable TCP console command server (for PuTTY, etc)
6	[BTN] Instant touch reaction instead of waiting for release (aka SetOption 13)
7	[MQTT] [Debug] Always set Retain flag to all published values
8	[LED] Alternate CW light mode (first PWM for warm/cold slider, second for brightness)
9	[SM2135] Use separate RGB/CW modes instead of writing all 5 values as RGB
10	[MQTT] Broadcast self state on MQTT connect
11	[PWM] BK7231 use 600hz instead of 1khz default
12	[LED] Remember LED driver state (RGBCW, enable, brightness, temperature) after reboot
13	[HTTP] Show actual PIN logic level for unconfigured pins
14	[IR] Do MQTT publish (RAW STRING) for incoming IR data
15	[IR] Allow 'unknown' protocol
16	[MQTT] Broadcast led final color RGBCW (topic name: YourDevName/led_finalcolor_rgbcw/get)
17	[LED] Automatically enable Light when changing brightness, color or temperature on WWW panel
18	[LED] Smooth transitions for LED (EXPERIMENTAL)
19	[MQTT] Always publish channels used by TuyaMCU
20	[LED] Force RGB mode (3 PWMs for LEDs) and ignore further PWMs if they are set
21	[MQTT] Retain power channels (Relay channels, etc)
22	[IR] Do MQTT publish (Tasmota JSON format) for incoming IR data
23	[LED] Automatically enable Light on any change of brightness, color or temperature
24	[LED] Emulate Cool White with RGB in device with four PWMs - Red is 0, Green 1, Blue 2, and Warm is 4
25	[POWER] Allow negative current/power for power measurement (all chips, BL0937, BL0942, etc)
26	[UART] Use alternate UART for BL0942, CSE, TuyaMCU, etc
27	[HASS] Invoke HomeAssistant discovery on change to ip address, configuration
28	[LED] Setting RGB white (FFFFFF) enables temperature mode
29	[NETIF] Use short device name as a hostname instead of a long name
30	[MQTT] Enable Tasmota TELE etc publishes (for ioBroker etc)
31	[UART] Enable UART command line
32	[LED] Use old linear brightness mode, ignore gamma ramp
33	[MQTT] Apply channel type multiplier on (if any) on channel value before publishing it
34	[MQTT] In HA discovery, add relays as lights
35	[HASS] Deactivate avty_t flag when publishing to HASS (permit to keep value). You must restart HASS discovery for change to take effect.
36	[DRV] Deactivate Autostart of all drivers
37	[WiFi] Quick connect to WiFi on reboot (TODO: check if it works for you and report on github)
38	[Power] Set power and current to zero if all relays are open
39	[MQTT] [Debug] Publish all channels (don't enable it, it will be publish all 64 possible channels on connect)
40	[MQTT] Use kWh unit for energy consumption (total, last hour, today) instead of Wh
41	[BTN] Ignore all button events (aka child lock)
42	[DoorSensor] Invert state
43	[TuyaMCU] Use queue
44	[HTTP] Disable authentication in safe mode (not recommended)
45	[MQTT Discovery] Don't merge toggles and dimmers into lights
46	[TuyaMCU] Store raw data
47	[TuyaMCU] Store ALL data
48	[PWR] Invert AC dir
49	[HTTP] Hide ON/OFF for relays (only red/green buttons)
50	[MQTT] Never add GET suffix
51	[WiFi] (RTL/BK/BL602) Enhanced fast connect by saving AP data to flash (preferable with Flag 37 & static ip). Quick reset 3 times to connect normally