commit 6e0e34d85cd46ceb37d16054e97a373a32770f6c upstream.
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object.
Signed-off-by: Taegu Ha <hataegu0826@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260401191311.3604898-1-hataegu0826@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit f50200dd44125e445a6164e88c217472fa79cdbc upstream.
When a gadget request is only partially transferred in transfer()
because the per-frame bandwidth budget is exhausted, the loop advances
to the next queued request. If that next request is a zero-length
packet (ZLP), len evaluates to zero and the code takes the
unlikely(len == 0) path, which sets is_short = 1. This bypasses the
bandwidth guard ("limit < ep->ep.maxpacket && limit < len") that
lives in the else branch and would otherwise break out of the loop for
non-zero requests. The is_short path then completes the URB before all
data from the first request has been transferred.
Reproducer (bulk IN, high speed):
Device side (FunctionFS with Linux AIO):
1. Queue a 65024-byte write via io_submit (127 * 512, i.e. a
multiple of the HS bulk max packet size).
2. Immediately queue a zero-length write (ZLP) via io_submit.
Host side:
3. Submit a 65536-byte bulk IN URB.
Expected: URB completes with actual_length = 65024.
Actual: URB completes with actual_length = 53248, losing 11776
bytes that leak into subsequent URBs.
At high speed the per-frame budget is 53248 bytes (512 * 13 * 8).
The 65024-byte request exhausts this budget after 53248 bytes, leaving
the request incomplete (req->req.actual < req->req.length). Neither
the request nor the URB is finished, and rescan is 0, so the loop
advances to the ZLP. For the ZLP, dev_len = 0, so len = min(12288, 0)
= 0, taking the unlikely(len == 0) path and setting is_short = 1.
The is_short handler then sets *status = 0, completing the URB with
only 53248 of the expected 65024 bytes.
Fix this by breaking out of the loop when the current request has
remaining data (req->req.actual < req->req.length). The request
resumes on the next timer tick, preserving correct data ordering.
Signed-off-by: Sebastian Urban <surban@surban.net>
Cc: stable <stable@kernel.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260315151045.1155850-1-surban@surban.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 616a63ff495df12863692ab3f9f7b84e3fa7a66d upstream.
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cab ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/68fc7c9c.050a0220.346f24.023c.GAE@google.com/
Tested-by: syzbot+19bed92c97bee999e5db@syzkaller.appspotmail.com
Fixes: 7dbd8f4cab ("USB: dummy-hcd: Fix erroneous synchronization change")
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/46135f42-fdbe-46b5-aac0-6ca70492af15@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 3fb43a7a5b44713f892c58ead2e5f3a1bc9f4ee7 upstream.
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmware loading was totally broken before commit ac584af599
("staging: comedi: me4000: fix firmware downloading"), but that is the
most sensible target for this fix.
Fixes: ac584af599 ("staging: comedi: me4000: fix firmware downloading")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260205133949.71722-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit cc797d4821c754c701d9714b58bea947e31dbbe0 upstream.
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Fixes: 85acac6109 ("Staging: comedi: add me_daq driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260205140130.76697-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 101ab946b79ad83b36d5cfd47de587492a80acf0 upstream.
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure. `dev->iobase`
may still be set to its initial value of 0, which would result in
undesired writes to low I/O port addresses. `dev->private` may still be
`NULL`, which would result in null pointer dereferences.
Fix `atmio16d_detach()` by checking that `dev->private` is valid
(non-null) before calling `reset_atmio16d()`. This implies that
`dev->iobase` was set correctly since that is set up before
`dev->private`.
Fixes: 2323b27630 ("Staging: comedi: add ni_at_atmio16d driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260128150011.5006-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 4b9a9a6d71e3e252032f959fb3895a33acb5865c upstream.
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d8 ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled.
Reported-by: syzbot+cc9f7f4a7df09f53c4a4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cc9f7f4a7df09f53c4a4
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260225132427.86578-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 01af542392b5d41fd659d487015a71f627accce3 upstream.
When device_register() fails, ulpi_register() calls put_device() on
ulpi->dev.
The device release callback ulpi_dev_release() drops the OF node
reference and frees ulpi, but the current error path in
ulpi_register_interface() then calls kfree(ulpi) again, causing a
double free.
Let put_device() handle the cleanup through ulpi_dev_release() and
avoid freeing ulpi again in ulpi_register_interface().
Fixes: 289fcff4bc ("usb: add bus type for USB ULPI")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260401025142.1398996-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit d14116f6529fa085b1a1b1f224dc9604e4d2a29c upstream.
The triggered buffer is initialized before the IRQ is requested. The
removal path currently calls iio_triggered_buffer_cleanup() before
free_irq(). This violates the expected LIFO.
Place free_irq() in the correct location relative to
iio_triggered_buffer_cleanup().
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 4c05799449108fb0e0a6bd30e65fffc71e60db4d upstream.
iio_device_register() should be at the end of the probe function to
prevent race conditions.
Place iio_device_register() at the end of the probe function and place
iio_device_unregister() accordingly.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 4216db1043a3be72ef9c2b7b9f393d7fa72496e6 upstream.
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 8b7a42ecdcdeb55580d9345412f7f8fc5aca3f6c upstream.
The Razer Kiyo Pro (1532:0e05) is a USB 3.0 UVC webcam whose firmware
does not handle USB Link Power Management transitions reliably. When LPM
is active, the device can enter a state where it fails to respond to
control transfers, producing EPIPE (-32) errors on UVC probe control
SET_CUR requests. In the worst case, the stalled endpoint triggers an
xHCI stop-endpoint command that times out, causing the host controller
to be declared dead and every USB device on the bus to be disconnected.
This has been reported as Ubuntu Launchpad Bug #2061177. The failure
mode is:
1. UVC probe control SET_CUR returns -32 (EPIPE)
2. xHCI host not responding to stop endpoint command
3. xHCI host controller not responding, assume dead
4. All USB devices on the affected xHCI controller disconnect
Disabling LPM prevents the firmware from entering the problematic low-
power states that precede the stall. This is the same approach used for
other webcams with similar firmware issues (e.g., Logitech HD Webcam C270).
Cc: stable <stable@kernel.org>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2061177
Signed-off-by: JP Hein <jp@jphein.com>
Link: https://patch.msgid.link/20260331003806.212565-2-jp@jphein.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 0e01c3416eb863ee7f156a9d7e7421ec0a9f68a0 upstream.
The Blackbox 724-746-5500 USB Director USB-RS-232 HUB, part number
IC135A, is a rebadged Edgeport/4 with its own USB device id.
Signed-off-by: Frej Drejhammar <frej@stacken.kth.se>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit ec8bf18814915460d9c617b556bf024efef26613 upstream.
It was only GCC 10 that fixed a MIPS64r6 code generation issue with a
`__multi3' libcall inefficiently produced to perform 64-bit widening
multiplication while suitable machine instructions exist to do such a
calculation. The fix went in with GCC commit 48b2123f6336 ("re PR
target/82981 (unnecessary __multi3 call for mips64r6 linux kernel)").
Adjust our code accordingly, removing build failures such as:
mips64-linux-ld: lib/math/div64.o: in function `mul_u64_add_u64_div_u64':
div64.c:(.text+0x84): undefined reference to `__multi3'
with the GCC versions affected.
Fixes: ebabcf17bc ("MIPS: Implement __multi3 for GCC7 MIPS64r6 builds")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601140146.hMLODc6v-lkp@intel.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: David Laight <david.laight.linux@gmail.com.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit d05111bfe37bfd8bd4d2dfe6675d6bdeef43f7c7 upstream.
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned.
Fixes: 2b64d153a0 ("Bluetooth: Add MITM mechanism to LE-SMP")
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 20756fec2f0108cb88e815941f1ffff88dc286fe upstream.
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated.
Fixes: fff3490f47 ("Bluetooth: Fix setting correct authentication information for SMP STK")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
commit 45424e871abf2a152e247a9cff78359f18dd95c0 upstream.
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stack.
A USB device with a product name containing many non-ASCII, non-space
characters (e.g. multibyte UTF-8) will reliably trigger this as follows:
BUG: KASAN: stack-out-of-bounds in copy_valid_id_string
sound/core/init.c:696 [inline]
BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c
sound/core/init.c:718
The off-by-one has been present since commit bafeee5b1f ("ALSA:
snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1),
which first introduced this whitespace-stripping loop. The original
code never accounted for the null terminator when bounding the copy.
Fix this by changing the loop bound to `sizeof(card->id) - 1`,
ensuring at least one byte remains as the null terminator.
Fixes: bafeee5b1f ("ALSA: snd_usb_caiaq: give better shortname")
Cc: stable@vger.kernel.org
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: Berk Cem Goksel <berkcgoksel@gmail.com>
Signed-off-by: Berk Cem Goksel <berkcgoksel@gmail.com>
Link: https://patch.msgid.link/20260329133825.581585-1-berkcgoksel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit ed0234c8458b3149f15e496b48a1c9874dd24a1b ]
In w7090p_tuner_write_serpar, msg is controlled by user. When msg[0].buf is null and msg[0].len is zero, former checks on msg[0].buf would be passed. If accessing msg[0].buf[2] without sanity check, null pointer deref would happen. We add
check on msg[0].len to prevent crash.
Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Link: https://lore.kernel.org/r/20250616013353.738790-1-alexguo1023@gmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit 0039a3b35b10d9c15d3d26320532ab56cc566750 ]
Because sync_files are passive waiters they do not participate in
the processing of fences like the traditional vmw_fence_wait IOCTL.
If userspace exclusively uses sync_files for synchronization then
nothing in the kernel actually processes fence updates as interrupts
for fences are masked and ignored if the kernel does not indicate to the
SVGA device that there are active waiters.
This oversight results in a bug where the entire GUI can freeze waiting
on a sync_file that will never be signalled as we've masked the interrupts
to signal its completion. This bug is incredibly racy as any process which
interacts with the fencing code via the 3D stack can process the stuck
fences on behalf of the stuck process causing it to run again. Even a
simple app like eglinfo is enough to resume the stuck process. Usually
this bug is seen at a login screen like GDM because there are no other
3D apps running.
By adding a seqno waiter we re-enable interrupt based processing of the
dma_fences associated with the sync_file which is signalled as part of a
dma_fence_callback.
This has likely been broken since it was initially added to the kernel in
2017 but has gone unnoticed until mutter recently started using sync_files
heavily over the course of 2024 as part of their explicit sync support.
Fixes: c906965dee ("drm/vmwgfx: Add export fence to file descriptor support")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228200633.642417-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit 4e453375561fc60820e6b9d8ebeb6b3ee177d42e ]
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
- Reproducible with a small userspace PoC.
</quote>
This patch does not reject duplicated options, as this might break
some user applications.
Instead, it makes sure to adjust opt_flen and opt_nflen to correctly
reflect the size of the current option headers, preventing the overflows
and the potential for panics.
This applies to IPV6_DSTOPTS, IPV6_HOPOPTS, and IPV6_RTHDR.
Specifically:
When a new IPV6_DSTOPTS is processed, the length of the old opt->dst1opt
is subtracted from opt->opt_flen before adding the new length.
When a new IPV6_HOPOPTS is processed, the length of the old opt->dst0opt
is subtracted from opt->opt_nflen.
When a new Routing Header (IPV6_RTHDR or IPV6_2292RTHDR) is processed,
the length of the old opt->srcrt is subtracted from opt->opt_nflen.
In the special case within IPV6_2292RTHDR handling where dst1opt is moved
to dst0opt, the length of the old opt->dst0opt is subtracted from
opt->opt_nflen before the new one is added.
Fixes: 333fad5364 ("[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542).")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Closes: https://lore.kernel.org/netdev/CAL_bE8JNzawgr5OX5m+3jnQDHry2XxhQT5=jThW1zDPtUikRYA@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260401154721.3740056-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit 1a280dd4bd1d616a01d6ffe0de284c907b555504 ]
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
=======================================================================
Fixes: 1abf272022 ("net: sched: tcindex, fw, flow: use tcf_block_q helper to get struct Qdisc")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260331050217.504278-2-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit faeea8bbf6e958bf3c00cb08263109661975987c ]
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)
Fixes: 1abf272022 ("net: sched: tcindex, fw, flow: use tcf_block_q helper to get struct Qdisc")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260331050217.504278-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit d10a26aa4d072320530e6968ef945c8c575edf61 ]
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_backlog_rcv() {
...
queued = x25_process_rx_frame(sk, skb);
...
if (!queued)
kfree_skb(skb);
}
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20260331-x25_fraglen-v4-1-3e69f18464b4@dev.tdt.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit ce8fe5287b87e24e225c342f3b0ec04f0b3680fe ]
platform_device_unregister() may still want to use the registered clks
during runtime resume callback.
Note that there is a commit d82d5303c4c5 ("net: macb: fix use after free
on rmmod") that addressed the similar problem of clk vs platform device
unregistration but just moved the bug to another place.
Save the pointers to clks into local variables for reuse after platform
device is unregistered.
BUG: KASAN: use-after-free in clk_prepare+0x5a/0x60
Read of size 8 at addr ffff888104f85e00 by task modprobe/597
CPU: 2 PID: 597 Comm: modprobe Not tainted 6.1.164+ #114
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x8d/0xba
print_report+0x17f/0x496
kasan_report+0xd9/0x180
clk_prepare+0x5a/0x60
macb_runtime_resume+0x13d/0x410 [macb]
pm_generic_runtime_resume+0x97/0xd0
__rpm_callback+0xc8/0x4d0
rpm_callback+0xf6/0x230
rpm_resume+0xeeb/0x1a70
__pm_runtime_resume+0xb4/0x170
bus_remove_device+0x2e3/0x4b0
device_del+0x5b3/0xdc0
platform_device_del+0x4e/0x280
platform_device_unregister+0x11/0x50
pci_device_remove+0xae/0x210
device_remove+0xcb/0x180
device_release_driver_internal+0x529/0x770
driver_detach+0xd4/0x1a0
bus_remove_driver+0x135/0x260
driver_unregister+0x72/0xb0
pci_unregister_driver+0x26/0x220
__do_sys_delete_module+0x32e/0x550
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 519:
kasan_save_stack+0x2c/0x50
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8e/0x90
__clk_register+0x458/0x2890
clk_hw_register+0x1a/0x60
__clk_hw_register_fixed_rate+0x255/0x410
clk_register_fixed_rate+0x3c/0xa0
macb_probe+0x1d8/0x42e [macb_pci]
local_pci_probe+0xd7/0x190
pci_device_probe+0x252/0x600
really_probe+0x255/0x7f0
__driver_probe_device+0x1ee/0x330
driver_probe_device+0x4c/0x1f0
__driver_attach+0x1df/0x4e0
bus_for_each_dev+0x15d/0x1f0
bus_add_driver+0x486/0x5e0
driver_register+0x23a/0x3d0
do_one_initcall+0xfd/0x4d0
do_init_module+0x18b/0x5a0
load_module+0x5663/0x7950
__do_sys_finit_module+0x101/0x180
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 597:
kasan_save_stack+0x2c/0x50
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x180
__kmem_cache_free+0xbc/0x320
clk_unregister+0x6de/0x8d0
macb_remove+0x73/0xc0 [macb_pci]
pci_device_remove+0xae/0x210
device_remove+0xcb/0x180
device_release_driver_internal+0x529/0x770
driver_detach+0xd4/0x1a0
bus_remove_driver+0x135/0x260
driver_unregister+0x72/0xb0
pci_unregister_driver+0x26/0x220
__do_sys_delete_module+0x32e/0x550
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Fixes: d82d5303c4c5 ("net: macb: fix use after free on rmmod")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260330184542.626619-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit b8dbe9648d69059cfe3a28917bfbf7e61efd7f15 ]
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state.
Fixes: 346af67b8d ("Bluetooth: Add MGMT handlers for dealing with SMP LTK's")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit 3d5d488f11776738deab9da336038add95d342d1 ]
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations.
Fixes: 9291747f11 ("netfilter: xtables: add device group match")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit 35177c6877134a21315f37d57a5577846225623e ]
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation.
Fixes: 076a0ca026 ("netfilter: ctnetlink: add NAT support for expectations")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit a242a9ae58aa46ff7dae51ce64150a93957abe65 ]
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)
Fixes: ac7b848390 ("netfilter: expect: add and use nf_ct_expect_iterate helpers")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit b7e8590987aa94c9dc51518fad0e58cb887b1db5 ]
IPSET_ATTR_NAME and IPSET_ATTR_NAMEREF are of NLA_STRING type, they
cannot be treated like a c-string.
They either have to be switched to NLA_NUL_STRING, or the compare
operations need to use the nla functions.
Fixes: f830837f0e ("netfilter: ipset: list:set set type support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit a958a4f90ddd7de0800b33ca9d7b886b7d40f74e ]
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change.
Fixes: c38c4597e4 ("netfilter: implement xt_cgroup cgroup2 path match")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit 6d52a4a0520a6696bdde51caa11f2d6821cd0c01 ]
This is a followup to an old bug fix: NLMSG_DONE needs to account
for the netlink header size, not just the attribute size.
This can result in a WARN splat + drop of the netlink message,
but other than this there are no ill effects.
Fixes: 9dfa1dfe4d ("netfilter: nf_log: account for size of NLMSG_DONE attribute")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit 9ca562bb8e66978b53028fa32b1a190708e6a091 ]
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU.
Fixes: d3aedd5ebd ("ipv6 flowlabel: Convert hash list to RCU.")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/07351f0ec47bcee289576f39f9354f4a64add6e4.1774855883.git.zcliangcn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
[ Upstream commit 393e0b4f178ec7fce1141dacc3304e3607a92ee9 ]
The XAXIDMA_BD_CTRL_LENGTH_MASK and XAXIDMA_BD_STS_ACTUAL_LEN_MASK
macros were defined as 0x007FFFFF (23 bits), but the AXI DMA IP
product guide (PG021) specifies the buffer length field as bits 25:0
(26 bits). Update both masks to match the IP documentation.
In practice this had no functional impact, since Ethernet frames are
far smaller than 2^23 bytes and the extra bits were always zero, but
the masks should still reflect the hardware specification.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260327073238.134948-2-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
