5583 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
NexusXe	ada7a23ddc	Fix capitalization	2022-02-16 08:33:06 -06:00
NexusXe	a72d0245fa	Fix link to supported boards ... It used to point to `boards.md`, which doesn't exist.	2022-02-16 08:29:20 -06:00
Ha Thach	fcca8bb4ca	Merge pull request #1327 from hathach/msc-request-sense ... Add msc request sense callback	2022-02-15 23:17:58 +07:00
hathach	46f4f7ff49	minor rename set sense function	2022-02-15 22:53:23 +07:00
hathach	391edc7afb	msc example response PREVENT_ALLOW_MEDIUM_REMOVAL command as unsupported command ... LUN1 of msc_disk_dual will be set to not ready to simulate medium not present (e.g SD card removed)	2022-02-15 22:40:08 +07:00
Ha Thach	de4932d9c5	Merge pull request #1318 from JayToltTech/master ... Nit spelling correction	2022-02-15 12:28:26 +07:00
Ha Thach	01684f71fb	Merge pull request #1322 from ZenithalHourlyRate/ZenithalHourlyRate-readme-typo ... readme: fix typo	2022-02-15 12:20:29 +07:00
hathach	456c06aa5e	add tud_msc_request_sense_cb() as weak callback ... set default error sense to NOT READY, Medium not present	2022-02-14 18:17:49 +07:00
Zenithal	678c415bea	readme: fix typo	2022-02-10 22:30:31 +08:00
Jay Beavers	2df57d2be0	Nit spelling correction	2022-02-09 08:19:01 -08:00
Ha Thach	63cb3cdc74	Merge pull request #1304 from kkitayam/add_hcd_for_frdm_kl25z ... Add hcd driver for frdm kl25z	2022-02-09 16:14:50 +07:00
Ha Thach	d6fb1859a4	Merge pull request #1291 from kasjer/kasjer/da1469x-fix-resume ... da1469x: fix resume	2022-02-02 20:20:39 +07:00
Ha Thach	c6cde724f6	Merge pull request #1305 from Ryzee119/patch-1 ... OHCI: Fix array out of bounds issue	2022-02-01 23:00:10 +07:00
Ha Thach	d56bbbb5a7	Merge pull request #1303 from mysterywolf/master ... add rt-thread's tinyusb repo address	2022-02-01 22:35:21 +07:00
Ryzee119	453ba529a6	OHCI: Fix array out of bounds issue ... If using a USB hub, a request outside the array size can occur Original line: ffb257ac17/src/portable/ohci/ohci.h (L162) It can happen in a few places but one such example is here: ffb257ac17/src/portable/ohci/ohci.c (L460) ie. if HUB address is 5, this would be an array index out of bounds on control endpoints as `CFG_TUH_DEVICE_MAX+1` is only 5. This fix just includes num of hubs in the reserve array size. Fixing locally fixed this issue.	2022-01-28 14:02:34 +10:30
kkitayam	ce7a8fed36	Add a partial support mark to KL25	2022-01-28 01:18:44 +09:00
kkitayam	03d2e32dc1	Fix handling for pending transfers	2022-01-27 23:38:19 +09:00
kkitayam	d7cbfaaa0a	Add hcd into source list	2022-01-27 22:26:51 +09:00
kkitayam	60a0be82da	Change hcd_edpt_xfer to send at the next SOF	2022-01-27 22:25:36 +09:00
kkitayam	cc06a3585e	Add handling for NAK response	2022-01-27 20:57:41 +09:00
kkitayam	cdab869472	Fix handling control transfer	2022-01-27 20:57:41 +09:00
kkitayam	a4bc6075ce	Add HCD functions for KL25Z	2022-01-27 20:57:40 +09:00
Man, Jianting (Meco)	6085999e2b	add rt-thread's tinyusb repo address	2022-01-26 20:08:34 -05:00
Ha Thach	ffb257ac17	Merge pull request #1301 from hathach/fix-mynewt-sunxi ... fix mynewt build sunxi	2022-01-26 17:02:52 +07:00
hathach	578a123282	fix mynewt build sunxi	2022-01-26 12:59:53 +07:00
Ha Thach	eea19daac6	Merge pull request #1220 from t123yh/master ... Add support for Allwinner F1C100s family	2022-01-26 12:52:46 +07:00
Ha Thach	7de166390e	Merge branch 'master' into master	2022-01-25 22:29:05 +07:00
Jerzy Kasenberg	7b078367e8	dcd_da1469x: Re-enable RX after resume ... Going to suspend states disable reception on non-0 RX endpoints. Now when USB resume condition is detected, all RX endpoints with pending transfers are resumed.	2022-01-20 16:28:09 +01:00
Jerzy Kasenberg	ae4d901d83	dcd_da1469x: Fix over-run/under-run mask ... Bit mask enabling/disabling over-run/unde-run was shifted by one nibble, so interrupt was never enabled. It did not force any issue as this situation could only happen on ISO endpoints without DMA.	2022-01-20 10:01:18 +01:00
Ha Thach	a592282079	Merge pull request #1288 from hathach/rx-host-example-ci ... enable ci build for RX65X host example	2022-01-19 20:46:23 +07:00
hathach	3b66bbf6d5	enable ci build for RX65X host example ... update comment for unit not ready 3a-00 additional sense	2022-01-19 19:12:21 +07:00
Ha Thach	e40547ada1	Merge pull request #1265 from kkitayam/add_hcd_for_renesas_rx ... Add HCD driver for Renesas RX	2022-01-19 19:07:21 +07:00
Ha Thach	9e99269875	Merge pull request #1287 from alisitsyn/bugfix/fix_idfgh6508 ... fix idfgh-6508: return type in tu_fifo_peek_n()	2022-01-19 17:50:33 +07:00
email	af9a3f646c	fix idfgh-6508: return type in tu_fifo_peek_n() ... https://github.com/espressif/esp-idf/issues/8161	2022-01-19 09:00:43 +01:00
Ha Thach	0b6b4f2441	Merge pull request #1286 from hathach/fix-fifo-mutex-when-full ... fix locked mutex when fifo is full	2022-01-19 10:45:33 +07:00
Ha Thach	983abfd6d8	Merge pull request #1279 from kasjer/kasjer/nrf5x-int-race ... nrf5x: Fix EP OUT race conditions	2022-01-19 10:33:37 +07:00
hathach	161ba73c8b	fix locked mutex when fifo is full	2022-01-19 10:17:39 +07:00
Ha Thach	84f2ca77f7	Merge pull request #1283 from kasjer/kasjer/olimex-pic32-board-fixes ... olimex pic32 board fixes	2022-01-19 09:55:18 +07:00
Ha Thach	92c36f187d	Merge pull request #1274 from kasjer/kasjer/nrf5x-request-clock-in-mynewt ... nrf5x: Request HFXO via OS	2022-01-18 20:00:23 +07:00
Jerzy Kasenberg	f4725120a4	nrf5x: Request HFXO via OS ... Mynewt (similar to Soft Device) has its own reference counting for HFXO oscillator. So far TinyUSB requested HFXO when VBUS was detected and stopped when VBUS was removed. But with Mynewt running HFXO can be stopped when other interested parties don't require HFXO anymore. This results in very difficult to track USB transmission errors. This change enables Mynewt specific HFXO management in Soft Device fashion.	2022-01-18 08:12:49 +01:00
Jerzy Kasenberg	45d56915d1	pic32/olimex boards: Fix active state of button ... Buttons for olimex_emz64 and olimex_hmz144 should be set to active low in board configuration.	2022-01-17 18:00:58 +01:00
Jerzy Kasenberg	168c7095e8	pic32mz: Fix remote_wakeup without OS ... Remote wakeup requires 10ms of delay when RESUME bit is toggled. It was covered for OS build. For non-OS build simple delay based on board_millis() is used to wait required amount of time. Without this remote wakup may not work.	2022-01-17 17:59:51 +01:00
Ha Thach	6972a4f5cf	Merge pull request #1276 from kkitayam/fix_video_capture_frame_interval ... Fix video_capture example fails enumeration when 8FPS	2022-01-17 23:57:42 +07:00
Ha Thach	11aa4b9bba	Merge pull request #1284 from kasjer/kasjer/ft9xx-mynewt ... ft9xx: Fix Mynewt build	2022-01-17 16:28:07 +07:00
Jerzy Kasenberg	ec01428820	ft9xx: Fix Mynewt build ... Includes were moved few lines down to restore build with Mynewt build system.	2022-01-17 09:14:41 +01:00
Ha Thach	58b8bdc2e4	Merge pull request #1277 from liamfraser/fix-cmake-skip ... Fix family_support.cmake to use new skip.txt and only.txt files	2022-01-17 14:36:51 +07:00
Ha Thach	61d392fad4	Merge pull request #1238 from ftdigdm/port-ft90x ... Port ft90x	2022-01-17 13:18:30 +07:00
Ha Thach	0780fd3d1e	Merge pull request #1269 from mysterywolf/master ... [rt-thread] add rt-thread os in readme	2022-01-17 12:37:53 +07:00
Ha Thach	efc29baead	Merge branch 'master' into port-ft90x	2022-01-17 12:36:39 +07:00
hathach	1a7de71e79	correct link in rst	2022-01-17 12:15:54 +07:00