dfca92d29b
follow up to pr468
2020-07-21 21:06:10 +07:00
787c891702
add note for MS OS 1.0 Descriptor at 0xEE
2020-07-21 21:00:11 +07:00
1e2c554919
Merge pull request #468 from me-no-dev/freertos-yield-from-isr
...
FreeRTOS: Yield from ISR to notify the USB task
2020-07-21 19:56:18 +07:00
3822a6a385
FreeRTOS: Yield from ISR to notify the USB task
...
If we do not yeld in ISR when we write to queue/give semaphore, the scheduler will not know of the change and will not check the queue untill the next OS tick. This change causes the task to be called immediately and makes communication many times faster.
2020-07-20 00:46:16 +03:00
a0f6fa4e06
update ci script
2020-07-19 14:19:39 +07:00
798fad397a
Merge pull request #464 from hathach/improve-highspeed
...
Better support highspeed mode
2020-07-19 13:24:57 +07:00
8e1290e51e
minor clean up
2020-07-19 13:13:21 +07:00
6ddee1b5cf
more update
2020-07-18 01:07:44 +07:00
881025afdc
add new name warning to cdc and midi (skip msc, hid warning for now)
2020-07-17 23:01:39 +07:00
7baeea7a00
update actual link speed for spresense
2020-07-17 18:28:19 +07:00
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
0517f4a2f1
dcd tdi report link speed on reset
2020-07-16 16:12:21 +07:00
5ca748a68e
rename CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
...
rename CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
2020-07-16 15:34:16 +07:00
fea6fb73a1
add fs & hs config for cdc_msc_freertos, midi_test, msc_dual_lun
2020-07-16 13:04:10 +07:00
ed065691ef
fix unintended changes to webusb example
2020-07-16 00:55:19 +07:00
706413f751
add tud_speed_get()
...
- define both fs and hs configuration descriptor
- rename CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE with default size of 64 for FS, and 512 for HS
2020-07-16 00:44:09 +07:00
2274740e48
Merge pull request #462 from ktemkin/add_luna_bsp
...
add BSP for Great Scott Gadgets' LUNA boards (SAMD21)
2020-07-15 11:31:11 +07:00
9181ce55fb
add BSP for Great Scott Gadgets' LUNA boards (SAMD21)
2020-07-14 21:51:31 -06:00
e1b3fe81c4
Merge pull request #461 from CraigHutchinson/patch-1
...
Improve comment on CDC tud_cdc_write_available()
2020-07-10 18:51:50 +07:00
323ae5a84f
Improve comment on CDC tud_cdc_write_available()
...
Fixes #460
2020-07-10 12:24:09 +01:00
81392da1ea
Merge pull request #456 from me-no-dev/esp32-s2-epin-to
...
ESP32-S2: Detect EP IN Xfer Timeout
2020-07-10 12:29:06 +07:00
dbced9911d
Merge pull request #447 from hathach/add-stm-hs
...
Add support for STM32 OTG HS core
2020-07-08 19:47:24 +07:00
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
f82655a212
correct EP Size for cdc dual and webusb example
2020-07-06 18:55:31 +07:00
a192d99bf0
Merge pull request #457 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-05 14:07:08 +07:00
8f433e67ac
Add stm32l4r5nucleo. USB and UARTwork.
...
USB runs from LSE stabilized MSI48
LPUART on PORTG needs VDDIO2 enabled.
2020-07-03 16:34:08 +02:00
11c6d4cdae
stlinkv3mini: Only OTG_HS has connector.
2020-07-03 10:59:02 +02:00
5c24d5ca72
stm32h745disco: HAL_PWREx_EnableUSBVoltageDetector() is needed for hot replug.
2020-07-03 10:53:51 +02:00
4b7539bd63
stm32h745disco: Only OTG_FS is available. Does not enumerate on replug yet.
2020-07-03 10:53:51 +02:00
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
ad5ae8c31d
update per review
2020-07-03 14:50:39 +07:00
a09a86d299
fix NVIC disable typo
2020-07-03 01:19:02 +07:00
d493724a7b
ESP32-S2: Detect EP IN Xfer Timeout
...
In some rare ocasions (bad cable, noise, etc.) data transfer might timeout and hang the endpoint, unless the interrupt flag is cleared.
This pull request targets to solve that case.
2020-07-02 13:05:17 +03:00
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
4966fb2e13
clean up
2020-07-02 01:25:21 +07:00
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
961d813953
Merge pull request #455 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 23:52:27 +07:00
5b3a67a1e2
Add bsp for stlinkv3mini.
2020-07-01 15:42:53 +02:00
196bdbc702
st/synopsys/dcd_synopsys.c: Remove USBC PHY PLL stabilization delay for now
...
While the ST code has a 2 ms stabilization delay for the USBC PHY PLL,
running without this delay showed no problem for at leat 10 USB un/replug
cycles. Observe for problems!
2020-07-01 14:45:07 +02:00
d2450abaaf
only set turnaround in reset complete
2020-07-01 18:51:04 +07:00
e3974d6869
correctly set turn around according to cpu clock
...
help to run with low speed mcu
2020-07-01 18:44:52 +07:00
77315ba7ce
added uart for h743
2020-07-01 18:27:48 +07:00
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
ed1b670c55
clean up code
2020-07-01 17:57:37 +07:00
0c9932440b
Merge pull request #452 from hathach/fix-dfu-rt
...
Fix dfu rt
2020-07-01 15:24:39 +07:00
ea67aee75b
Update README.md
2020-07-01 13:19:06 +07:00
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 13:09:07 +07:00
383f8047a5
Merge pull request #453 from hathach/add-da14695-usb
...
Add da14695 usb
2020-07-01 13:02:16 +07:00
463e978134
added DA14695 DK USB bsp
2020-07-01 12:47:14 +07:00
