Use a local SysBusDevice handle. Also use the newly introduced
sysbus_mmio_map_name which brings better readability about the region
being mapped. GED device has regions which exist depending on some
external properties and it becomes difficult to guess the index of
a region. Better refer to a region by its name.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-32-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some sysbus devices have conditional mmio regions. This
happens for instance with the hw/acpi/ged device. In that case
it becomes difficult to predict which index a specific MMIO
region corresponds to when one needs to mmio map the region.
Introduce a new helper that takes the name of the region instead
of its index. If the region is not found this returns -1.
Otherwise it maps the corresponding index and returns this latter.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-31-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU will notify the OS about PCI hotplug/hotunplug events through
GED interrupts. Let the GED device handle a new PCI hotplug event.
On its occurrence it calls the \\_SB.PCI0.PCNT method with the BLCK
mutex held.
The GED device uses a dedicated MMIO region that will be mapped
by the machine code.
At this point the GED still does not support PCI device hotplug in
its TYPE_HOTPLUG_HANDLER implementation. This will come in a
subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-29-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let pass the root bus to ich9 and piix4 through a property link
instead of through an argument passed to acpi_pcihp_init().
Also make sure the root bus is set at the entry of acpi_pcihp_init().
The rationale of that change is to be consistent with the forecoming ARM
implementation where the machine passes the root bus (steming from GPEX)
to the GED device through a link property.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-28-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GPEX acpi_dsdt_add_pci_osc() does basically the same as
build_q35_osc_method().
Rename build_q35_osc_method() into build_pci_host_bridge_osc_method()
and move it into hw/acpi/pci.c. In a subsequent patch we will
use this later in place of acpi_dsdt_add_pci_osc().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-9-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_x86_acpi_pci_hotplug() implementation
for ARM so let's move the code to generic pcihp.
Associated static aml_pci_pdsm() helper is also moved along.
build_x86_acpi_pci_hotplug is renamed into build_acpi_pci_hotplug().
No code change intended.
Also fix the reference to acpi_pci_hotplug.rst documentation
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To keep "qemu/target-info.h" self-contained to native
types, declare target_arch() -- which returns a QAPI
type -- in "qemu/target-info-qapi.h".
No logical change.
Keeping native types in "qemu/target-info.h" is necessary
to keep building tests such tests/tcg/plugins/mem.c, as
per the comment added in commit ecbcc9ead2 ("tests/tcg:
add a system test to check memory instrumentation"):
/*
* plugins should not include anything from QEMU aside from the
* API header. However as this is a test plugin to exercise the
* internals of QEMU and we want to avoid needless code duplication we
* do so here. bswap.h is pretty self-contained although it needs a
* few things provided by compiler.h.
*/
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be necessary for devices implementing ATS.
We also define a new macro IOMMU_ACCESS_FLAG_FULL in addition to
IOMMU_ACCESS_FLAG to support more access flags.
IOMMU_ACCESS_FLAG is kept for convenience and backward compatibility.
Here are the flags added (defined by the PCIe 5 specification) :
- Execute Requested
- Privileged Mode Requested
- Global
- Untranslated Only
IOMMU_ACCESS_FLAG sets the additional flags to 0
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-3-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow user to set a preferred scale (defaulting to 1) of the virtual
display. Along with zoom-to-fix=false, this would be helpful for users
running QEMU on hi-dpi host desktop to achieve pixel to pixel display --
e.g., if the scale factor of a user's host desktop is set to 200%, then
they can set a 0.5 scale for the virtual display to avoid magnification
that might cause blurriness.
Signed-off-by: Weifeng Liu <weifeng.liu.z@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250601045245.36778-3-weifeng.liu.z@gmail.com>
Thanks to 72d277a7, 1ed2cb32, and others, EDID (Extended Display
Identification Data) is propagated by QEMU such that a virtual display
presents legitimate metadata (e.g., name, serial number, preferred
resolutions, etc.) to its connected guest.
This change adds the ability to specify the EDID name for a particular
virtio-vga display. Previously, every virtual display would have the same
name: "QEMU Monitor". Now, we can inject names of displays in order to test
guest behavior that is specific to display names. We provide the ability to
inject the display name from the frontend since this is guest visible
data. Furthermore, this makes it clear where N potential display outputs
would get their name from (which will be added in a future change).
Note that we have elected to use a struct here for output data for
extensibility - we intend to add per-output fields like resolution in a
future change.
It should be noted that EDID names longer than 12 bytes will be truncated
per spec (I think?).
Testing: verified that when I specified 2 outputs for a virtio-gpu with
edid_name set, the names matched those that I configured with my vnc
display.
-display vnc=localhost:0,id=aaa,display=vga,head=0 \
-display vnc=localhost:1,id=bbb,display=vga,head=1 \
-device '{"driver":"virtio-vga",
"max_outputs":2,
"id":"vga",
"outputs":[
{
"name":"AAA"
},
{
"name":"BBB"
}
]}'
Signed-off-by: Andrew Keesler <ankeesler@google.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20250709121126.2946088-2-ankeesler@google.com>
If an ESP command is issued in an incorrect mode then an illegal command
interrupt should be generated. Add a new esp_cmd_is_valid() function to
indicate whether the ESP command is valid for the current mode, and if not
then raise the illegal command interrupt.
This fixes WinNT MIPS which issues ICCS after a Chip Reset which is not
permitted, but will fail with an INACCESSIBLE_BOOT_DEVICE error unless an
interrupt is generated.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 83428f7a97 ("esp.c: move write_response() non-DMA logic to esp_do_nodma()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2464
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250711204636.542964-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a new asc_mode property to ESPState which indicates the current mode of
the ESP and update the ESP state machine accordingly.
Bump the vmstate version and include migration logic to ensure that asc_mode
is set to initiator mode such that any commands in progress will always
continue.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250711204636.542964-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The function bdrv_open_child_common() calls
bdrv_graph_wrlock_drained(), which must be called with the graph
unlocked. Mark it and its two callers bdrv_open_file_child() and
bdrv_open_child() as GRAPH_UNLOCKED. This requires temporarily
unlocking in vmdk_parse_extents() and making the locked section
shorter in vmdk_open().
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250530151125.955508-48-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The functions blk_log_writes_close(), blkverify_close(),
quorum_close(), vmdk_close() via vmdk_free_extents(), and other
bdrv_close() implementations call bdrv_graph_wrlock_drained(), which
must be called with the graph unlocked. They are reached via the
BlockDriver's bdrv_close() callback and the bdrv_close() wrapper,
which are also marked as GRAPH_UNLOCKED_PTR and GRAPH_UNLOCKED.
Furthermore, the function bdrv_close() also calls bdrv_drained_begin()
and bdrv_graph_wrlock_drained(), so there are additional reasons for
marking it GRAPH_UNLOCKED.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250530151125.955508-47-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function commit_abort() calls bdrv_drained_begin(), which must be
called with the graph unlocked.
Also mark the JobDriver's abort() callback as GRAPH_UNLOCKED_PTR,
because that is the callback via which commit_abort() is reached.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250530151125.955508-41-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function blk_remove_bs() calls bdrv_graph_wrlock_drained() and can
also call bdrv_drained_begin(), both of which which must be called with
the graph unlocked.
Marking blk_remove_bs() as GRAPH_UNLOCKED requires temporarily
unlocking in hmp_drive_del().
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250530151125.955508-38-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function bdrv_inactivate() calls bdrv_drain_all_begin(), which
needs to be called with the graph unlocked, so either
bdrv_inactivate() should be marked as GRAPH_UNLOCKED or the drain
needs to be moved to the callers. The caller in
qmp_blockdev_set_active() requires that the locked section covers
bdrv_find_node() too, so the latter alternative is chosen.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250530151125.955508-36-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function bdrv_reopen_queue() can call bdrv_drain_all_begin(),
which must be called with the graph unlocked.
The function bdrv_reopen_multiple() calls bdrv_reopen_prepare() which
must be called with the graph unlocked.
To mark bdrv_reopen_queue() as GRAPH_UNLOCKED, it is necessary to make
the locked section in reopen_backing_file() shorter.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250530151125.955508-35-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function stream_prepare() calls bdrv_drain_all_begin(), which
must be called with the graph unlocked.
Also mark the JobDriver's prepare() callback as GRAPH_UNLOCKED_PTR,
because that is the callback via which stream_prepare() is reached.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20250530151125.955508-34-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
