Prepare for 64-bit addresses.
This makes no functional difference as the upper parts of
the 64-bit addresses are not yet reachable.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add explicit handling for MMU_R_TLBX and log accesses to
invalid MMU registers. We can now remove the state for
all regs but PID, ZPR and TLBX (0 - 2).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add support for Extended Addressing. Load/stores with EA
enabled concatenate two 32bit registers to form an extended
address.
We don't allow users to enable address sizes larger than
32 bits quite yet though. Once the MMU support is in, we'll
turn it on.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Setup MicroBlaze builds for 64bit addressing.
No functional change since the translator does not yet
emit 64bit addresses.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Extend special registers to 64-bits. This is in preparation for
MFSE/MTSE, moves to and from extended special registers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Break out trap_illegal() to handle illegal operation traps.
We now generally stop translation of the current insn if
it's not valid.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Break out trap_userspace() to avoid open coding it everywhere.
For privileged insns, we now always stop translation of the
current insn for cores without exceptions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Make compute_ldst_addr always use a temp. This simplifies
the code a bit in preparation for adding support for
64bit addresses.
No functional change.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Conditionalize setting of PVR11_USE_MMU on the use_mmu
CPU property, otherwise we may incorrectly advertise an
MMU via PVR when the core in fact has none.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
We already have a CPU property to control if a core has
an MMU or not. Remove USE_MMU PVR checks in favor of
looking at the property.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tighten up TCGv_i32 vs TCGv type usage. Avoid using TCGv when
TCGv_i32 should be used.
This is in preparation for adding 64bit addressing support.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Today, when running QEMU in linux-user or with boards that don't
select a specific CPU version, we treat it as an invalid version
and log a message.
Instead, if no specific version was selected, fallback to our
latest CPU version.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use bool instead of unsigned int to represent flags.
Also, use extract32 instead of open coding the bit extract.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
gdb_handlesig()'s behaviour is not entirely obvious at first
glance. Add a doc comment for it, and also add a comment
explaining why it's ok for gdb_do_syscallv() to ignore
gdb_handlesig()'s return value. (Coverity complains about
this: CID 1390850.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515181958.25837-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coverity points out that there's a missing break in the switch in
host_to_target_cmsg() where we update tgt_len for
cmsg_level/cmsg_type combinations which require a different length
for host and target (CID 1385425). To avoid duplicating the default
case (target length same as host) in both switches, set that before
the switch so that only the cases which want to override it need any
code.
This fixes a bug where we would have used the wrong length
for SOL_SOCKET/SO_TIMESTAMP messages where the target and
host have differently sized 'struct timeval' (ie one is 32
bit and the other is 64 bit).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180518184715.29833-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
cpu_init() was replaced by cpu_create() since 2.12 but comments
weren't updated. So update stale comments to point that page
sizes arei actually initialized by tcg_exec_init(). Also move
another qemu_host_page_size related comment before tcg_exec_init()
where it belongs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1526557877-293151-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In thunk_type_align() and thunk_type_size() we currently return
-1 if the value at the type_ptr isn't one of the TYPE_* values
we understand. However, this should never happen, and if it does
then the calling code will go confusingly wrong because none
of the callsites try to handle an error return. Switch to an
assertion instead, so that if this does somehow happen we'll have
a nice clear backtrace of what happened rather than a weird crash
or misbehaviour.
This also silences various Coverity complaints about not handling
the negative return value (CID 1005735, 1005736, 1005738, 1390582).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180514174616.19601-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
pc, pci, virtio, vhost: fixes, features
Beginning of merging vDPA, new PCI ID, a new virtio balloon stat, intel
iommu rework fixing a couple of security problems (no CVEs yet), fixes
all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 23 May 2018 15:41:32 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (28 commits)
intel-iommu: rework the page walk logic
util: implement simple iova tree
intel-iommu: trace domain id during page walk
intel-iommu: pass in address space when page walk
intel-iommu: introduce vtd_page_walk_info
intel-iommu: only do page walk for MAP notifiers
intel-iommu: add iommu lock
intel-iommu: remove IntelIOMMUNotifierNode
intel-iommu: send PSI always even if across PDEs
nvdimm: fix typo in label-size definition
contrib/vhost-user-blk: enable protocol feature for vhost-user-blk
hw/virtio: Fix brace Werror with clang 6.0.0
libvhost-user: Send messages with no data
vhost-user+postcopy: Use qemu_set_nonblock
virtio: support setting memory region based host notifier
vhost-user: support receiving file descriptors in slave_read
vhost-user: add Net prefix to internal state structure
linux-headers: add kvm header for mips
linux-headers: add unistd.h on all arches
update-linux-headers.sh: unistd.h, kvm consistency
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Xen 2018/05/22
# gpg: Signature made Tue 22 May 2018 19:44:06 BST
# gpg: using RSA key 894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg: aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* remotes/sstabellini-http/tags/xen-20180522-tag:
xen_disk: be consistent with use of xendev and blkdev->xendev
xen_disk: use a single entry iovec
xen_backend: make the xen_feature_grant_copy flag private
xen_disk: remove use of grant map/unmap
xen_backend: add an emulation of grant copy
xen: remove other open-coded use of libxengnttab
xen_disk: remove open-coded use of libxengnttab
xen_backend: add grant table helpers
xen: add a meaningful declaration of grant_copy_segment into xen_common.h
checkpatch: generalize xen handle matching in the list of types
xen-hvm: create separate function for ioreq server initialization
xen_pt: Present the size of 64 bit BARs correctly
configure: Add explanation for --enable-xen-pci-passthrough
xen/pt: use address_space_memory object for memory region hooks
xen-pvdevice: Introduce a simplistic xen-pvdevice save state
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/lm32: BQL patch
# gpg: Signature made Tue 22 May 2018 19:25:30 BST
# gpg: using RSA key B458ABB0D8D378E3
# gpg: Good signature from "Michael Walle <michael@walle.cc>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2190 3E48 4537 A7C2 90CE 3EB2 B458 ABB0 D8D3 78E3
* remotes/mwalle/tags/lm32-queue/20180521:
lm32: take BQL before writing IP/IM register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After writing up the virtual mdev device emulating a display supporting
the bochs vbe dispi interface (mbochs.ko) and seeing how simple it
actually is I've figured that would be useful for qemu too.
So, here it is, -device bochs-display. It is basically -device VGA
without legacy vga emulation. PCI bar 0 is the framebuffer, PCI bar 2
is mmio with the registers. The vga registers are simply not there
though, neither in the legacy ioport location nor in the mmio bar.
Consequently it is PCI class DISPLAY_OTHER not DISPLAY_VGA.
So there is no text mode emulation, no weird video modes (planar,
256color palette), no memory window at 0xa0000. Just a linear
framebuffer in the pci memory bar. And the amount of code to emulate
this (and therefore the attack surface) is an order of magnitude smaller
when compared to vga emulation.
Compatibility wise it works with OVMF (latest git master).
The bochs-drm.ko linux kernel module can handle it just fine too.
So UEFI guests should not see any functional difference to VGA.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180522165058.15404-4-kraxel@redhat.com
