We reject backing file names with a length of more than 1023 characters
when opening a qcow2 file, so we should not produce such files
ourselves.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_pwrite_sync used to return zero or negative error, while blk_pwrite returns
the number of written bytes when successful. This caused VPC image creation
to fail spectacularly: it wrote the first 512 bytes, and then exited immediately
because of the non-zero answer from blk_pwrite. But the truly spectacular part
is that it returns a positive value (the 512 that blk_pwrite returned) causing
everyone to believe that it succeeded.
This fixes qemu-iotests with vpc format.
Fixes: b8f45cdf78
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The actual on-disk size of a file does not only depend on factors qemu
can control. Thus, we should not depend on this to determine whether a
file has indeed been fully allocated. Instead, use qemu-img map and hope
that if an area is referenced, it is indeed allocated, too.
Also, limit the supported image formats to raw and qcow2 because the
actual qemu-img map output may depend on the image format.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Any programs which call the qcrypto APIs should ensure that
qcrypto_init() has been called before anything else which
can use crypto. Essentially this means right at the start
of the main method before initializing anything else.
This is important because some versions of gnutls/gcrypt
require explicit initialization before use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Tested-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error_reportf_err() will not automatically append a
': ' before adding its suffix, so we must include that
in the message we pass it, otherwise we get a badly
formatted message lacking whitespace:
qemu-img: Could not open 'driver=nbd,host=127.0.0.1,port=6666,tls-creds=tls0'Failed to connect socket: Connection refused
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes longstanding issue with 026 iotest. Unfortunately,
this test contains 2 versions of the correct output, one for cached
writes and one for non-cached ones. People tends to fix only one
version of output of the test and thus noncached version becomes
broken. Unfortunately, it is default in tests/check-block.sh
The following problematic commits were made:
commit 3b5e14c76a
Author: Max Reitz <mreitz@redhat.com>
Date: Tue Dec 2 18:32:51 2014 +0100
qcow2: Flushing the caches in qcow2_close may fail
commit a069e2f137
Author: John Snow <jsnow@redhat.com>
Date: Fri Feb 6 16:26:17 2015 -0500
blkdebug: fix "once" rule
commit b106ad9185
Author: Kevin Wolf <kwolf@redhat.com>
Date: Fri Mar 28 18:06:31 2014 +0100
qcow2: Don't rely on free_cluster_index in alloc_refcount_block()
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Max Reitz <mreitz@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using the nested aio_poll() in coroutine is a bad idea. This patch
replaces the aio_poll loop in bdrv_drain with a BH, if called in
coroutine.
For example, the bdrv_drain() in mirror.c can hang when a guest issued
request is pending on it in qemu_co_mutex_lock().
Mirror coroutine in this case has just finished a request, and the block
job is about to complete. It calls bdrv_drain() which waits for the
other coroutine to complete. The other coroutine is a scsi-disk request.
The deadlock happens when the latter is in turn pending on the former to
yield/terminate, in qemu_co_mutex_lock(). The state flow is as below
(assuming a qcow2 image):
mirror coroutine scsi-disk coroutine
-------------------------------------------------------------
do last write
qcow2:qemu_co_mutex_lock()
...
scsi disk read
tracked request begin
qcow2:qemu_co_mutex_lock.enter
qcow2:qemu_co_mutex_unlock()
bdrv_drain
while (has tracked request)
aio_poll()
In the scsi-disk coroutine, the qemu_co_mutex_lock() will never return
because the mirror coroutine is blocked in the aio_poll(blocking=true).
With this patch, the added qemu_coroutine_yield() allows the scsi-disk
coroutine to make progress as expected:
mirror coroutine scsi-disk coroutine
-------------------------------------------------------------
do last write
qcow2:qemu_co_mutex_lock()
...
scsi disk read
tracked request begin
qcow2:qemu_co_mutex_lock.enter
qcow2:qemu_co_mutex_unlock()
bdrv_drain.enter
> schedule BH
> qemu_coroutine_yield()
> qcow2:qemu_co_mutex_lock.return
> ...
tracked request end
...
(resumed from BH callback)
bdrv_drain.return
...
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1459855253-5378-2-git-send-email-famz@redhat.com
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ldstub [addr], reg incorrectly reads a signed byte from memory which causes
problems in the 32-bit Solaris mutex code. Here the byte value being read is
0xff which is incorrectly sign-extended to 0xffffffff before being written back
to the target register causing lock detection to behave incorrectly.
This fixes the intermittent hangs and MUTEX_HELD warnings issued to the
console when running 32-bit Solaris images under qemu-system-sparc.
With thanks to Joseph Dery for providing a condensed test image to consistently
reproduce the problem on demand, and Martin Husemann for allowing me access to
real hardware for comparison.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Feeling a bit nervous putting the full live migration support
patch (https://patchwork.ozlabs.org/patch/606902/) in that
late in the 2.6 devel cycle as it carries some non-trivial
changes. So disable migration in case virtio-gpu is present
for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a the new qemu_create_displaysurface_pixman function, to create
a DisplaySurface backed by an existing pixman image. In that case
there is no need to create a new pixman image pointing to the same
backing storage. We can just use the existing image directly.
This does not only simplify things a bit, but most importantly it
gets the reference counting right, so the backing storage for the
pixman image wouldn't be released underneath us.
Use new function in virtio-gpu, where using it actually fixes
use-after-free crashes.
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1459499240-742-1-git-send-email-kraxel@redhat.com
MIPS patches 2016-04-08
Changes:
* fix off-by-one error in ITU
# gpg: Signature made Fri 08 Apr 2016 10:43:16 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"
* remotes/lalrae/tags/mips-20160408:
hw/mips_itu: fix off-by-one reported by Coverity
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pci, virtio, acpi: fixes for 2.6
Fixes all over the place. Most notably, fixes migration
for systems with pci express bridges, and random crashes
observed with virtio blk and scsi dataplane.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 08 Apr 2016 08:53:46 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
hw/pci-bridge: Add missing unref in case register-bus fails
virtio: merge virtio_queue_aio_set_host_notifier_handler with virtio_queue_set_aio
virtio-scsi: use aio handler for data plane
virtio-blk: use aio handler for data plane
virtio: add aio handler
virtio-scsi: fix disabled mode
virtio-blk: fix disabled mode
virtio: make virtio_queue_notify_vq static
tests/bios-tables-test: fix assert
virtio-balloon: reset the statistic timer to load device
Migration: Add i82801b11 migration data
Sort the fw_cfg file list
xen: piix reuse pci generic class init function
pci-testdev: fast mmio support
acpi: Add missing GCC_FMT_ATTR
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ppc patch queue for 2016-04-08
Just a single bugfix for spapr in this batch, but I want to make sure
it gets in for 2.6.
# gpg: Signature made Fri 08 Apr 2016 06:02:45 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160408:
spapr: Fix ibm,lrdr-capacity
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Xtensa-related fixes:
- fix networking on xtfpga platform in linux v4.5 by indicating
autonegotiation completion in opencores_eth MII BMSR.
# gpg: Signature made Thu 07 Apr 2016 23:33:59 BST using RSA key ID F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
* remotes/xtensa/tags/20160408-xtensa:
opencores_eth: indicate autonegotiation completion
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tci patch queue
# gpg: Signature made Thu 07 Apr 2016 18:01:55 BST using RSA key ID 677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>"
# gpg: aka "Stefan Weil <stefan.weil@weilnetz.de>"
# gpg: aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2 B78A E08C 21D5 6774 50AD
* remotes/weil/tags/pull-tci-20160407:
tci: Fix build regression
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* NBD fixes from Alex and Eric
* Debug code bitrot from Emilio
* HPET fix from Bill
* ps2kbd fix from Hervé
* PKU fix from myself
* Coverity fixes from Gonglei
* More memory.txt update from Jiangang
* .gitignore maintenance from Changlong
# gpg: Signature made Thu 07 Apr 2016 23:08:12 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
target-i386: check for PKU even for non-writable pages
tests: ignore test-logging
translate-all: add missing fold of tb_ctx into tcg_ctx
hostmem-file: fix memory leak
spapr: fix possible Negative array index read
nbd: do not hang nbd_wr_syncv if outside a coroutine and no available data
nbd: Don't kill server when client requests unknown option
nbd: Fix NBD unsupported options
qemu-nbd: Document -x option
nbd: Improve debug traces on little-endian
nbd: Avoid bitrot in TRACE() usage
nbd: Return correct error for write to read-only export
docs: fix typo in memory.txt
hw/timer: Revert "hpet: inverse polarity when pin above ISA_NUM_IRQS"
ps2kbd: default to scancode_set 2, as with KBD_CMD_RESET
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix off-by-one error in ITC Tag read.
Remove the switch as we just want to check if index is in valid range
rather than test against list of values.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
ibm,lrdr-capacity has a field to describe the maximum address in bytes
and therefore, the most memory that can be allocated to this guest. We
are using maxmem for this field, but instead should use the actual RAM
address corresponding to the end of hotplug region.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Xiao Guangrong ran kvm-unit-tests on an actual machine with PKU and
found that it fails:
test pte.p pte.user pde.p pde.user pde.a pde.pse pkru.wd pkey=1 user write efer.nx cr4.pke: FAIL: error code 27 expected 7
Dump mapping: address: 0x123400000000
------L4: 2ebe007
------L3: 2ebf007
------L2: 8000000020000a5
(All failures are combinations of "pde.user pde.p pkru.wd pkey=1",
plus either "pde.pse" or "pte.p pte.user", plus one of "user cr0.wp",
"cr0.wp" or "user", plus unimportant bits such as accessed/dirty or
efer.nx).
So PFEC.PKEY is set even if the ordinary check failed (which it did
because pde.w is zero). Adjust QEMU to match behavior of silicon.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Until commit 1c778ef7 ("nbd: convert to using I/O channels for actual
socket I/O", 2016-02-16), nbd_wr_sync returned -EAGAIN this scenario.
nbd_reply_ready required these semantics because it has two conflicting
requirements:
1) if a reply can be received on the socket, nbd_reply_ready needs
to read the header outside coroutine context to identify _which_
coroutine to enter to process the rest of the reply
2) on the other hand, nbd_reply_ready can find a false positive if
another thread (e.g. a VCPU thread running aio_poll) sneaks in and
calls nbd_reply_ready too. In this case nbd_reply_ready does nothing
and expects nbd_wr_syncv to return -EAGAIN.
Currently, the solution to the first requirement is to wait in the very
rare case of a read() that doesn't retrieve the reply header in its
entirety; this is what nbd_wr_syncv does by calling qio_channel_wait().
However, the unconditional call to qio_channel_wait() breaks the second
requirement. To fix this, the patch makes nbd_wr_syncv return -EAGAIN
if done is zero, similar to the code before commit 1c778ef7.
This is okay because NBD client-side negotiation is the only other case
that calls nbd_wr_syncv outside a coroutine, and it places the socket
in blocking mode. On the other hand, it is a bit unpleasant to put
this in nbd_wr_syncv(), because the function is used by both client
and server.
The full fix would be to add a counter to NbdClientSession for how
many bytes have been filled in s->reply. Then a reply can be filled
by multiple separate invocations of nbd_reply_ready and the
qio_channel_wait() call can be removed completely. Something to
consider for 2.7...
Reported-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nbd-server.c currently fails to handle unsupported options properly.
If during option haggling the client sends an unknown request, the
server kills the connection instead of letting the client try to
fall back to something older. This is precisely what advertising
NBD_FLAG_FIXED_NEWSTYLE was supposed to fix.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459982918-32229-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nbd-client.c currently fails to handle unsupported options properly.
If during option haggling the server finds an option that is
unsupported, it returns an NBD_REP_ERR_UNSUP reply.
According to nbd's proto.md, the format for such a reply
should be:
S: 64 bits, 0x3e889045565a9 (magic number for replies)
S: 32 bits, the option as sent by the client to which this is a reply
S: 32 bits, reply type (e.g., NBD_REP_ACK for successful completion,
or NBD_REP_ERR_UNSUP to mark use of an option not known by this server
S: 32 bits, length of the reply. This may be zero for some replies,
in which case the next field is not sent
S: any data as required by the reply (e.g., an export name in the case
of NBD_REP_SERVER, or optional UTF-8 message for NBD_REP_ERR_*)
However, in nbd-client.c, the reply type was being read, and if it
contained an error, it was bailing out and issuing the next option
request without first reading the length. This meant that the
next option / handshake read had an extra 4 or more bytes of data in it.
In practice, this makes Qemu incompatible with servers that do not
support NBD_OPT_LIST.
To verify this isn't an error in the specification or my reading of
it, replies are sent by the reference implementation here:
https://github.com/yoe/nbd/blob/66dfb35/nbd-server.c#L1232
and as is evident it always sends a 'datasize' (aka length) 32 bit
word. Unsupported elements are replied to here:
https://github.com/yoe/nbd/blob/66dfb35/nbd-server.c#L1371
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Message-Id: <1459882500-24316-1-git-send-email-alex@alex.org.uk>
[rework to ALWAYS consume an optional UTF-8 message from the server]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459961962-18771-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Print debug tracing messages while data is still in native
ordering, rather than after we've potentially swapped it into
network order for transmission. Also, it's nice if the server
mentions what it is replying, to correlate it to with what the
client says it is receiving.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459913704-19949-4-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD Protocol requires that servers should send EPERM for
attempts to write (or trim) a read-only export. We were
correct for TRIM (blk_co_discard() gave EPERM); but were
manually setting EROFS which then got mapped to EINVAL over
the wire on writes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459913704-19949-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 0d63b2dd31.
This change was originally intended to correct the HPET behavior
in conjunction with Linux, however the behavior that it actually creates
is not compatible with the ioapic.c implementation; it used to be
compatible with KVM's own IOAPIC but it is not anymore.
Signed-off-by: Bill Paul <wpaul@windriver.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <201604051558.20070.wpaul@windriver.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This line has been added in commit ef74679a81 with
other initializations. However, scancode set 0 doesn't exist (only 1, 2, 3).
This works well as long as operating system is resetting keyboard, or overwriting
the current scancode set with the one it wants.
This fixes IBM 40p firmware, which doesn't bother sending KBD_CMD_RESET or KBD_CMD_SCANCODE.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1458714100-28885-1-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-ga patch queue for 2.6
* fix w32 bug where output from guest-exec is not properly captured
* fix w32 bug where FDs are leaked after guest-exec is invoked
# gpg: Signature made Thu 07 Apr 2016 17:46:21 BST using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
* remotes/mdroth/tags/qga-pull-2016-04-07-tag:
qga: Workaround for console redirection from non-interactive qemu-ga service
qga: fix fd leak with guest-exec i/o channels
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit d38ea87ac5 cleaned the include
statements which resulted in a wrong order of assert.h and the definition
of NDEBUG in tci.c. Normally NDEBUG modifies the definition of the assert
macro, but here this definition comes too late which results in a failing
build.
To fix this, a new macro tci_assert which depends on CONFIG_DEBUG_TCG
is introduced. Only builds with CONFIG_DEBUG_TCG will use assertions.
Even in this case, it is still possible to disable assertions by
defining NDEBUG via compiler settings.
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The error paths after a successful qdev_create/pci_bus_new
should contain a object_unref/object_unparent.
pxb_dev_init_common() did not yet, so add it.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Eliminating the reentrancy is actually a nice thing that we can do
with the API that Michael proposed, so let's make it first class.
This also hides the complex assign/set_handler conventions from
callers of virtio_queue_aio_set_host_notifier_handler, which in
fact was always called with assign=true.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In addition to handling IO in vcpu thread and in io thread, dataplane
introduces yet another mode: handling it by AioContext.
This reuses the same handler as previous modes, which triggers races as
these were not designed to be reentrant. Use a separate handler just
for aio, and disable regular handlers when dataplane is active.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In addition to handling IO in vcpu thread and in io thread, dataplane
introduces yet another mode: handling it by AioContext.
This reuses the same handler as previous modes, which triggers races as
these were not designed to be reentrant. Use a separate handler just
for aio, and disable regular handlers when dataplane is active.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In addition to handling IO in vcpu thread and in io thread, blk dataplane
introduces yet another mode: handling it by AioContext.
Currently, this reuses the same handler as previous modes,
which triggers races as these were not designed to be reentrant.
Add instead a separate handler just for aio; this will make
it possible to disable regular handlers when dataplane is active.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add two missing checks for s->dataplane_fenced. In one case, QEMU
would skip injecting an IRQ due to a write to an uninitialized
EventNotifier's file descriptor.
In the second case, the dataplane_disabled field was used by mistake;
in fact after fixing this occurrence it is completely unused.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We must not call virtio_blk_data_plane_notify if dataplane is
disabled: we would hit a segmentation fault in notify_guest_bh as
s->guest_notifier has not been setup and is NULL.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
