This routine is intended to produce high-quality random numbers to the
guest. Normally, such numbers are crypto quality from the host, but a
command-line option can force the use of a fully deterministic sequence
for use while debugging.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a better interface for random numbers than rand().
Fail gracefully if for some reason we cannot use the crypto system.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can always get EINTR for read; /dev/urandom is no exception.
Rearrange the order of tests for likelihood; allow degenerate buflen==0
case to perform a no-op zero-length read. This means that the normal
success path is a straight line with a single test for success.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For user-only, we require only the random number bits of the
crypto subsystem. Rename crypto-aes-obj-y to crypto-user-obj-y,
and add the random number objects, plus init.o to handle any
extra stuff the crypto library requires.
Move the crypto libraries from libs_softmmu and libs_tools to
LIBS, so that they are universally used.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
add several new features (msa9, sort, deflate, additional vector
instructions, new general purpose instructions) to generation 15.
Also disable csske and bpb from the default and base models >=15.
This will allow to migrate gen15 machines to future machines that
do not have these features.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190429090250.7648-9-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provide the MSA9 facility (stfle.155). This also contains pckmo
subfunctions for key wrapping. Keep them in a separate group to disable
those as a block if necessary. This is for example needed when disabling
key wrapping via the HMC.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190429090250.7648-5-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
pci, pc, virtio: features, fixes
reconnect for vhost blk
tests for UEFI
misc other stuff
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 21 May 2019 14:41:32 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (34 commits)
tests: acpi: print error unable to dump ACPI table during rebuild
tests: acpi: refactor rebuild-expected-aml.sh to dump ACPI tables for a specified list of targets
tests: acpi: allow to override default accelerator
tests: acpi: ignore SMBIOS tests when UEFI firmware is used
tests: acpi: add a way to start tests with UEFI firmware
tests: acpi: add acpi_find_rsdp_address_uefi() helper
tests: acpi: move boot_sector_init() into x86 tests branch
tests: acpi: skip FACS table if board uses hw reduced ACPI profile
tests: acpi: fetch X_DSDT if pointer to DSDT is 0
tests: acpi: make pointer to RSDP 64bit
tests: acpi: make RSDT test routine handle XSDT
tests: acpi: make acpi_fetch_table() take size of fetched table pointer
tests: acpi: rename acpi_parse_rsdp_table() into acpi_fetch_rsdp_table()
pci: Simplify pci_bus_is_root()
pcie: Remove redundant test in pcie_mmcfg_data_{read,write}()
libvhost-user: fix bad vu_log_write
hw/arm/virt-acpi-build: pass AcpiMcfgInfo to build_mcfg()
i386, acpi: remove mcfg_ prefix in AcpiMcfgInfo members
hw/arm/virt-acpi-build: remove unnecessary variable mcfg_start
do not call vhost_net_cleanup() on running net from char user event
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- qtest patches to get rid of the global_qtest variable in more tests
- some iotests patches that have multiple reviews and thus are ready to go
# gpg: Signature made Tue 21 May 2019 11:40:31 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-05-21:
tests/qemu-iotests: Remove the "_supported_os Linux" line from many tests
cirrus / travis: Add gnu-sed and bash for macOS and FreeBSD
tests/qemu-iotests: Do not hard-code the path to bash
tests/qemu-iotests/check: Pick a default machine if necessary
tests/qemu-iotests/005: Add a sanity check for large sparse file support
tests/hd-geo-test: Use qtest_init() instead of qtest_start()
tests/device-introspect: Use qtest_init() instead of qtest_start()
tests/qom-test: Use qtest_init() instead of qtest_start()
tests/numa-test: Use qtest_init() instead of qtest_start()
tests/q35-test: Make test independent of global_qtest
tests/libqos: Get rid of global_qtest dependency in qvring_init()
tests/libqtest: Fix description of qtest_vinitf() and qtest_initf()
tests/libqtest: Remove unused global_qtest-related wrapper functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of tests run fine on FreeBSD and macOS, too - the limitation
to Linux here was likely just copied-and-pasted from other tests.
Thus remove the "_supported_os Linux" line from tests that run
successful in our CI pipelines on FreeBSD and macOS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qemu-system-arm, qemu-system-aarch64 and qemu-system-tricore do not have
a default machine, so when running the qemu-iotests with such a binary,
lots of tests are failing. Fix it by picking a default machine in the
"check" script instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Message-Id: <20190515174328.16361-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Message-Id: <20190515174328.16361-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Message-Id: <20190515174328.16361-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Message-Id: <20190515174328.16361-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use a local QTestState variable, so that we can finally get rid
of the undesired global_qtest variable in this file, too.
Message-Id: <20190515174328.16361-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Library functions should not depend on global_qtest functions like
writew() and writeq(), so that they can also be used in tests that
deal with multiple QTestStates at the same time (like migration tests).
Message-Id: <20190515174328.16361-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By default test cases were run with 'kvm:tcg' accelerators to speed up
tests execution. While it works for x86, were change of accelerator
doesn't affect ACPI tables, the approach doesn't works for ARM usecase
though.
In arm/virt case, KVM mode requires using 'host' cpu model, which
isn't available in TCG mode. That could be worked around with 'max'
cpu model, which works both for KVM and TCG. However in KVM mode it
is necessary to specify matching GIC version, which also could use
'max' value to automatically pick GIC version suitable for host's CPU.
Depending on host cpu type, different GIC versions would be used,
which in turn leads to different ACPI tables (APIC) generated.
As result while comparing with reference blobs, test would fail if
host's GIC version won't match the version on the host where
reference blobs where generated.
Let's keep testing simple for now and allow ARM tests run in TCG only
mode. To do so introduce 'accel' parameter in test configuration, so
test case could override default "kvm:tcg" with accelerator of choice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1556808723-226478-12-git-send-email-imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For testcase to use UEFI firmware, one needs to provide and specify
firmware and varstore blob names in test_data { uefi_fl1, uefi_fl2 }
fields respectively and RAM start address plus size where to look for
test structure signature. Additionally testcase should specify
bootable cdrom image from uefi-boot-images with EFI test utility.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1556808723-226478-10-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
introduce UEFI specific counterpart to acpi_find_rsdp_address()
that will help to find RSDP address when [OA]VMF is used as
firmware. It requires guest firmware or other guest app to place
1Mb aligned UefiTestSupport structure (defined in this patch)
in RAM with UefiTestSupport::signature_guid set to
AB87A6B1-2034-BDA0-71BD-375007757785
For test app details see commit
(09a274d82f tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1556808723-226478-9-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently acpi_fetch_table() assumes 32 bit size of table pointer
in ACPI tables. However X_foo variants are 64 bit, prepare
acpi_fetch_table() to handle both by adding an argument
for addr_ptr pointed entry size. Follow up commits will use that
to read XSDT and X_foo entries in ACPI tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1556808723-226478-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
