In the armv7m object, handle clock inputs that aren't connected.
This is always an error for 'cpuclk'. For 'refclk' it is OK for this
to be disconnected, but we need to handle it by not trying to connect
a sourceless-clock to the systick device.
This fixes a bug where on the mps2-an521 and similar boards (which
do not have a refclk) the systick device incorrectly reset with
SYST_CSR.CLKSOURCE 0 ("use refclk") rather than 1 ("use CPU clock").
Cc: qemu-stable@nongnu.org
Reported-by: Richard Petri <git@rpls.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208171643.3486277-1-peter.maydell@linaro.org
Currently there is no way for a board model's Kconfig stanza to
say "I have an i2c bus which the user can plug an i2c device into,
build all the free-standing i2c devices". The Kconfig mechanism
for this is the "device group". Add an I2C_DEVICES group along
the same lines as the existing PCI_DEVICES. Simple free-standing
i2c devices which a user might plausibly want to be able to
plug in on the QEMU commandline should have
default y if I2C_DEVICES
and board models which have an i2c bus that is user-accessible
should use
imply I2C_DEVICES
to cause those pluggable devices to be built.
In this commit we mark only a fairly conservative set of i2c devices
as belonging to the I2C_DEVICES group: the simple sensors and RTCs
(not including PMBus devices or devices which need GPIO lines to be
connected).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20220208155911.3408455-2-peter.maydell@linaro.org
Currently we don't allow guests under hvf to use the PAuth extension,
because we didn't have any special code to handle that, and therefore
in arm_cpu_pauth_finalize() we will sanitize the ID_AA64ISAR1 value
the guest sees to clear the PAuth related fields.
Add support for this in the same way that KVM does it, by defaulting
to "PAuth enabled" if the host CPU has it and allowing the user to
disable it via '-cpu pauth=no' on the command line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-7-peter.maydell@linaro.org
Currently when using hvf we mishandle '-cpu max': we fall through to
the TCG version of its initfn, which then sets a lot of feature bits
that the real host CPU doesn't have. The hvf accelerator code then
exposes these bogus ID register values to the guest because it
doesn't check that the host really has the features.
Make '-cpu host' be like '-cpu max' for hvf, as we do with kvm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-6-peter.maydell@linaro.org
Currently for KVM the intention is that '-cpu max' and '-cpu host'
are the same thing, but because we did this with two separate
pieces of code they have got a little bit out of sync. Specifically,
'max' has a 'sve-max-vq' property, and 'host' does not.
Bring the two together by having the initfn for 'max' actually
call the initfn for 'host'. This will result in 'max' no longer
exposing the 'sve-max-vq' property when using KVM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-4-peter.maydell@linaro.org
Use the aarch64_cpu_register() machinery to register the 'host' CPU
type. This doesn't gain us anything functionally, but it does mean
that the code for initializing it looks more like that for the other
CPU types, in that its initfn then doesn't need to call
arm_cpu_post_init() (because aarch64_cpu_instance_init() does that
for it).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-3-peter.maydell@linaro.org
We are parsing the syndrome field for sysregs in multiple places across
the hvf code, but repeat shift/mask operations with hard coded constants
every time. This is an error prone approach and makes it harder to reason
about the correctness of these operations.
Let's introduce macros that allow us to unify the constants used as well
as create new helpers to extract fields from the sysreg value.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Cameron Esfahani <dirty@apple.com <mailto:dirty@apple.com>>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220209124135.69183-1-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
V3: virtiofs pull 2022-02-17
Security label improvements from Vivek
- includes a fix for building against new kernel headers
[V3: checkpatch style fixes]
[V2: Fix building on old Linux]
Blocking flock disable from Sebastian
SYNCFS support from Greg
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 17 Feb 2022 17:24:25 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20220217b:
virtiofsd: Add basic support for FUSE_SYNCFS request
virtiofsd: Add an option to enable/disable security label
virtiofsd: Create new file using O_TMPFILE and set security context
virtiofsd: Create new file with security context
virtiofsd: Add helpers to work with /proc/self/task/tid/attr/fscreate
virtiofsd: Move core file creation code in separate function
virtiofsd, fuse_lowlevel.c: Add capability to parse security context
virtiofsd: Extend size of fuse_conn_info->capable and ->want fields
virtiofsd: Parse extended "struct fuse_init_in"
linux-headers: Update headers to v5.17-rc1
virtiofsd: Fix breakage due to fuse_init_in size change
virtiofsd: Do not support blocking flock
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
9pfs: fixes and cleanup
* Fifth patch fixes a 9pfs server crash that happened on some systems due
to incorrect (system dependant) handling of struct dirent size.
* Tests: Second patch fixes a test error that happened on some systems due
mkdir() being called twice for creating the test directory for the 9p
'local' tests.
* Tests: Third patch fixes a memory leak.
* Tests: The remaining two patches are code cleanup.
# gpg: Signature made Thu 17 Feb 2022 16:19:25 GMT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* remotes/cschoenebeck/tags/pull-9p-20220217:
9pfs: Fix segfault in do_readdir_many caused by struct dirent overread
tests/9pfs: Use g_autofree and g_autoptr where possible
tests/9pfs: Fix leak of local_test_path
tests/9pfs: fix mkdir() being called twice
tests/9pfs: use g_autofree where possible
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's leave cpu_init with just generic CPU initialization and
QOM-related functions.
The rest of the SPR registration functions will be moved in the
following patches along with the code that uses them. These are only
the commonly used ones.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-28-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These will need to be accessed from other files once we move the CPUs
code to separate files.
The check_pow_hid0 and check_pow_hid0_74xx are too specific to be
moved to a header so I'll deal with them later when splitting this
code between the multiple CPU families.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-27-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The following patches will move CPU-specific code into separate files,
so expose the most used SPR registration functions:
register_sdr1_sprs | 22 callers
register_low_BATs | 20 callers
register_non_embedded_sprs | 19 callers
register_high_BATs | 10 callers
register_thrm_sprs | 8 callers
register_usprgh_sprs | 6 callers
register_6xx_7xx_soft_tlb | only 3 callers, but it helps to
keep the soft TLB code consistent.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-25-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Initial intent for the spr_tcg header was to expose the spr_read|write
callbacks that are only used by TCG code. However, although these
routines are TCG-specific, the KVM code needs access to env->sprs
which creation is currently coupled to the callback registration.
We are probably not going to decouple SPR creation and TCG callback
registration any time soon, so let's rename the header to spr_common
to accomodate the register_*_sprs functions that will be moved out of
cpu_init.c in the following patches.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-24-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is just to have 755-specific registers contained into a function,
intead of leaving them open-coded in init_proc_755. It makes init_proc
easier to read and keeps later patches that touch this code a bit
cleaner.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-16-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 745 and 755 can share the HID registration, so move it all into
register_755_sprs, which applies for both CPUs.
Also rename that function to register_745_sprs, since the 745 is the
earliest of the two. This will help with separating 755-specific
registers in a subsequent patch.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-14-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're considering these two to be in different CPU families (6xx and
7xx), so keep their SPR registration separate.
The code was copied into register_G2_sprs and the common function was
renamed to apply only to the 755.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make sure that every register_*_sprs function only has calls to
spr_register* to register individual SPRs. Do not allow nesting. This
makes the code easier to follow and a look at init_proc_* should
suffice to know what SPRs a CPU has.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The /* XXX : not implemented */ comments all over cpu_init are
confusing and ambiguous.
Do they mean not implemented by QEMU, not implemented in a specific
access mode? Not implemented by the CPU? Do they apply to just the
register right after or to a whole block? Do they mean we have an
action to take in the future to implement these? Are they only
informative?
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220216162426.1885923-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This implements the Nested KVM HV hcall API for spapr under TCG.
The L2 is switched in when the H_ENTER_NESTED hcall is made, and the
L1 is switched back in returned from the hcall when a HV exception
is sent to the vhyp. Register state is copied in and out according to
the nested KVM HV hcall API specification.
The hdecr timer is started when the L2 is switched in, and it provides
the HDEC / 0x980 return to L1.
The MMU re-uses the bare metal radix 2-level page table walker by
using the get_pate method to point the MMU to the nested partition
table entry. MMU faults due to partition scope errors raise HV
exceptions and accordingly are routed back to the L1.
The MMU does not tag translations for the L1 (direct) vs L2 (nested)
guests, so the TLB is flushed on any L1<->L2 transition (hcall entry
and exit).
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-10-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce virtual hypervisor methods that can support a "Nested KVM HV"
implementation using the bare metal 2-level radix MMU, and using HV
exceptions to return from H_ENTER_NESTED (rather than cause interrupts).
HV exceptions can now be raised in the TCG spapr machine when running a
nested KVM HV guest. The main ones are the lev==1 syscall, the hdecr,
hdsi and hisi, hv fu, and hv emu, and h_virt external interrupts.
HV exceptions are intercepted in the exception handler code and instead
of causing interrupts in the guest and switching the machine to HV mode,
they go to the vhyp where it may exit the H_ENTER_NESTED hcall with the
interrupt vector numer as return value as required by the hcall API.
Address translation is provided by the 2-level page table walker that is
implemented for the bare metal radix MMU. The partition scope page table
is pointed to the L1's partition scope by the get_pate vhc method.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220216102545.1808018-9-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The virtual hypervisor currently always intercepts and handles
hypercalls but with a future change this will not always be the case.
Add a helper for the test so the logic is abstracted from the mechanism.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220216102545.1808018-7-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In prepartion for implementing a full partition table option for
vhyp, update the get_pate method to take an lpid and return a
success/fail indicator.
The spapr implementation currently just asserts lpid is always 0
and always return success.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch fixes ]
Message-Id: <20220216102545.1808018-6-npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
