OpenBK7231T_App/docs/flags.md

Flags

Here is the latest, up to date Flags list. This file was autogenerated by running 'node scripts/getcommands.js' in the repository. All descriptions were taken from code. Do not add anything here, as it will overwritten with next rebuild.

ID	Description
0	[MQTT] Broadcast led params together (send dimmer and color when dimmer or color changes, topic name: YourDevName/led_basecolor_rgb/get, YourDevName/led_dimmer/get)",
1	[MQTT] Broadcast led final color (topic name: YourDevName/led_finalcolor_rgb/get)",
2	[MQTT] Broadcast self state every N (def: 60) seconds (delay configurable by 'mqtt_broadcastInterval' and 'mqtt_broadcastItemsPerSec' commands)",
3	[LED][Debug] Show raw PWM controller on WWW index instead of new LED RGB/CW/etc picker",
4	[LED] Force show RGBCW controller (for example, for SM2135 LEDs, or for DGR sender)",
5	[CMD] Enable TCP console command server (for Putty, etc)",
6	[BTN] Instant touch reaction instead of waiting for release (aka SetOption 13)",
7	[MQTT] [Debug] Always set Retain flag to all published values",
8	[LED] Alternate CW light mode (first PWM for warm/cold slider, second for brightness)",
9	[SM2135] Use separate RGB/CW modes instead of writing all 5 values as RGB",
10	[MQTT] Broadcast self state on MQTT connect",
11	[PWM] BK7231 use 600hz instead of 1khz default",
12	[LED] Remember LED driver state (RGBCW, enable, brightness, temperature) after reboot",
13	[HTTP] Show actual PIN logic level for unconfigured pins",
14	[IR] Do MQTT publish (RAW STRING) for incoming IR data",
15	[IR] Allow 'unknown' protocol",
16	[MQTT] Broadcast led final color RGBCW (topic name: YourDevName/led_finalcolor_rgbcw/get)",
17	[LED] Automatically enable Light when changing brightness, color or temperature on WWW panel",
18	[LED] Smooth transitions for LED (EXPERIMENTAL)",
19	[MQTT] Always publish channels used by TuyaMCU",
20	[LED] Force RGB mode (3 PWMs for LEDs) and ignore futher PWMs if they are set",
21	[MQTT] Retain power channels (Relay channels, etc)",
22	[IR] Do MQTT publish (Tasmota JSON format) for incoming IR data",
23	[LED] Automatically enable Light on any change of brightness, color or temperature",
24	[LED] Emulate Cool White with RGB in device with four PWMS - Red is 0, Green 1, Blue 2, and Warm is 4",
25	[POWER] Allow negative current/power for power measurement (all chips, BL0937, BL0942, etc)",
26	[UART] Use alternate UART for BL0942, CSE, TuyaMCU, etc",
27	[HASS] Invoke HomeAssistant discovery on change to ip address, configuration",
28	[LED] Setting RGB white (FFFFFF) enables temperature mode",
29	[NETIF] Use short device name as a hostname instead of a long name",
30	[MQTT] Enable Tasmota TELE etc publishes (for ioBroker etc)",
31	[UART] Enable UART command line",
32	[LED] Use old linear brightness mode, ignore gamma ramp",
33	[MQTT] Apply channel type multiplier on (if any) on channel value before publishing it",
34	[MQTT] In HA discovery, add relays as lights",
35	[HASS] Deactivate avty_t flag for sensor when publishing to HASS (permit to keep value)",
36	[DRV] Deactivate Autostart of all drivers",
37	[WiFi] Quick connect to WiFi on reboot (TODO: check if it works for you and report on github)",