mirror of
https://github.com/hathach/tinyusb.git
synced 2026-04-02 04:43:47 +00:00
Added weact h743 board support
This commit is contained in:
Valentyn Korniienko
11
hw/bsp/stm32h7/boards/stm32h743_weact/board.cmake
Normal file
11
hw/bsp/stm32h7/boards/stm32h743_weact/board.cmake
Normal file
@ -0,0 +1,11 @@
|
||||
set(MCU_VARIANT stm32h743xx)
|
||||
set(JLINK_DEVICE stm32h743xi)
|
||||
|
||||
set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
|
||||
|
||||
function(update_board TARGET)
|
||||
target_compile_definitions(${TARGET} PUBLIC
|
||||
STM32H743xx
|
||||
HSE_VALUE=25000000
|
||||
)
|
||||
endfunction()
|
||||
161
hw/bsp/stm32h7/boards/stm32h743_weact/board.h
Normal file
161
hw/bsp/stm32h7/boards/stm32h743_weact/board.h
Normal file
@ -0,0 +1,161 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
/* metadata:
|
||||
name: STM32 H743 Eval
|
||||
url: https://www.st.com/en/evaluation-tools/stm32h743i-eval.html
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H_
|
||||
#define BOARD_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// UART
|
||||
#define UART_DEV USART3
|
||||
#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE
|
||||
|
||||
// VBUS Sense detection
|
||||
#define OTG_FS_VBUS_SENSE 1
|
||||
#define OTG_HS_VBUS_SENSE 0
|
||||
|
||||
#define PINID_LED 0
|
||||
#define PINID_BUTTON 1
|
||||
#define PINID_UART_TX 2
|
||||
#define PINID_UART_RX 3
|
||||
|
||||
static board_pindef_t board_pindef[] =
|
||||
{{// LED
|
||||
.port = GPIOE,
|
||||
.pin_init =
|
||||
{.Pin = GPIO_PIN_3, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0},
|
||||
.active_state = 1},
|
||||
{// Button
|
||||
.port = GPIOC,
|
||||
.pin_init =
|
||||
{.Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0},
|
||||
.active_state = 1},
|
||||
{// UART TX
|
||||
.port = GPIOB,
|
||||
.pin_init = {.Pin = GPIO_PIN_10,
|
||||
.Mode = GPIO_MODE_AF_PP,
|
||||
.Pull = GPIO_PULLUP,
|
||||
.Speed = GPIO_SPEED_HIGH,
|
||||
.Alternate = GPIO_AF7_USART3},
|
||||
.active_state = 0},
|
||||
{// UART RX
|
||||
.port = GPIOB,
|
||||
.pin_init = {.Pin = GPIO_PIN_11,
|
||||
.Mode = GPIO_MODE_AF_PP,
|
||||
.Pull = GPIO_PULLUP,
|
||||
.Speed = GPIO_SPEED_HIGH,
|
||||
.Alternate = GPIO_AF7_USART3},
|
||||
.active_state = 0}};
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// RCC Clock
|
||||
//--------------------------------------------------------------------+
|
||||
static inline void SystemClock_Config(void) {
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
|
||||
/** Supply configuration update enable
|
||||
*/
|
||||
HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
|
||||
|
||||
/** Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 1;
|
||||
RCC_OscInitStruct.PLL.PLLN = 100;
|
||||
RCC_OscInitStruct.PLL.PLLP = 2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 4;
|
||||
RCC_OscInitStruct.PLL.PLLR = 2;
|
||||
RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_3;
|
||||
RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
|
||||
RCC_OscInitStruct.PLL.PLLFRACN = 0;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 |
|
||||
RCC_CLOCKTYPE_D3PCLK1 | RCC_CLOCKTYPE_D1PCLK1;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
|
||||
RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
// Initialize USB clock
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
|
||||
PeriphClkInitStruct.PLL3.PLL3M = 1;
|
||||
PeriphClkInitStruct.PLL3.PLL3N = 24;
|
||||
PeriphClkInitStruct.PLL3.PLL3P = 2;
|
||||
PeriphClkInitStruct.PLL3.PLL3Q = 4;
|
||||
PeriphClkInitStruct.PLL3.PLL3R = 2;
|
||||
PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_3;
|
||||
PeriphClkInitStruct.PLL3.PLL3FRACN = 0;
|
||||
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
static inline void board_init2(void) {
|
||||
// For this board does nothing
|
||||
}
|
||||
|
||||
void board_vbus_set(uint8_t rhport, bool state) {
|
||||
(void)rhport;
|
||||
(void)state;
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
12
hw/bsp/stm32h7/boards/stm32h743_weact/board.mk
Normal file
12
hw/bsp/stm32h7/boards/stm32h743_weact/board.mk
Normal file
@ -0,0 +1,12 @@
|
||||
# STM32H743I-WEACT uses OTG_FS
|
||||
# FIXME: Reset enumerates, un/replug USB plug does not enumerate
|
||||
MCU_VARIANT = stm32h743xx
|
||||
CFLAGS += -DSTM32H743xx -DHSE_VALUE=25000000
|
||||
|
||||
LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash.ld
|
||||
|
||||
# For flash-jlink target
|
||||
JLINK_DEVICE = stm32h743xi
|
||||
|
||||
# flash target using on-board stlink
|
||||
flash: flash-jlink
|
||||
Reference in New Issue
Block a user