Clean up includes definitions
Remove wait that is not required
Remove redundant settings
Clean up clock configuration to look like other modules
Remove MSP_Init that is not required
Clean up driver code
dhcp: Fix DHCP_OFFER/DHCP_ACK destinaton.
In RFC 2131, the destination of DHCP OFFER/ACK is defined in Section 4.1.
Fix the destination error by following the rule of RFC 2131.
TODO: We implement all rule but the last one. ARP table is required to associate client's macaddr.
Currently, fallback to broadcast.
Signed-off-by: Elwin Huang <s09289728096@gmail.com>
Fix compile error.
Fix goto indentation
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Fix osal_spin_unlock for mynewt
Mynewt version for osal_spin_unlock() called
OS_ENTER_CRITICAL instead of OS_EXIT_CRITICAL.
Signed-off-by: Jerzy Kasenberg <jerzy@apache.org>
Add ESP32-C5 and ESP32-C61 definitions
fix(dcd/dwc2): Fix reset procedure for versions >=4.20a
Fix STM32L4 GPIOD clock enable for variants without GPIOD
Add weact blackpill support
Add to boards.rst file
Fix file
Small cleanups.
Insert small delay for LowSpeed device
Improve retry operation at NAK response.
Remove dynamic memory allocation
use tusb_time_millis_api() instead of board_millis()
make loopdelay() always inline
update at32f405 dwc2 info and phy width selection
add at32f415 dwc2 info
add some consumer page configs
remove duplicated enum
Initial plan
Fix obsolete cnt assignment in _tu_fifo_peek() overflow check
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
Initial plan
Update STM32 CMSIS dependencies to fix HSITRIM register bug
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
Remove accidentally committed dependency directories
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
Update all STM32 HAL driver dependencies to latest versions
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
fix linker h745 issue with clang
fix linker h745 issue with clang
Update all STM32 CMSIS device dependencies to latest versions
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
update pio-usb
Create comprehensive GitHub Copilot instructions and fix pre-commit configuration for TinyUSB (#3234)
* Initial plan
* Create comprehensive GitHub Copilot instructions for TinyUSB
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
* Remove accidentally committed dependencies, use tools/get_deps.py instead
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
* Fix .gitignore: ignore vendor/ directory not ceedling script
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
* Revert .gitignore changes and add README_processed.rst
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
* Remove README_processed.rst and revert ceedling file permissions
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
* Changes before error encountered
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
* Remove redundant manual validation step, keep only pre-commit and build validation
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
* fix pre-commit
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: hathach <249515+hathach@users.noreply.github.com>
modified the bsp files of at32 to make them work better
the family name error of at32 has been corrected
fix pre-commit
STM32N6570-DK board is added. Build with DEBUG=1 (make BOARD=stm32n6570dk DEBUG=1 all), otherwise it does not work for now. Tested with examples/device/cdc_dual_ports
I will be porting tinyuf2 to MCXA156 and N947 and need this work in place.
This is the 1st step before bringing in support for other MCX devices.
We had previous patched https://github.com/hathach/mcux-sdk.git' for MCX support as it was not pulically available
I updated get_deps to point to the mcux-sdk version 2.16.10 from NXP. I repointed the entry in the get_deps script to use NXP MCU repo. The existing current code couldn't build as the MCUXpresso SDK was old.
- For now, I put a copy of fsl_spc.c in the drivers folder for the mcx family. None of the ports could build with the version in the mcux github sdk. The sdk on github has version 2.4.0. The SDK package that can be downloaded with the SDK generator uses 2.4.2. All of the clock_config routines use versions of the datastructure from 2.4.2. For now, keeping an updated copy in hw/bsp/mcx/drivers so we can build against the latest mcuxpresso sdk and enable MCXA156. I'll file an issue on the nxp github.
- Cleaned up the MCX family.c a little bit. the MCXA/N these chips don't have SCT so I removed the neopixel code.
- fixed a clock init issue w/ N947 that was causing it to crash when initializing the uart.
- I tested the cmake and make scripts on the A153,A156 and N947 using the CDC/MSC sample. All worked OK.
- Patched get_deps so it will do a fetch/check on a new folder. Some of the deps were failing on a fresh clone of tinyusb
- Fixed lpc51,54 and lpc55 make/cmake files to build with mcuxpresso sdk 2.16.10 The folder structure for flexcomm/uart changed a little bit
- lpc55s59 libpower_hardabi.a no longer is included in mcuxpressosdk, (fsl_power.c is replacement). remove of libpower_hardabi.a from the linker config. LPC55 still works as expected.
- Using tinyuf2 get deps
